XKB-IMP550BTCLiSMP3 secure mobile payment terminal compatible with smartphone

Ingenico SA – 28-32 boulevard de Grenelle 75015 Paris - FRANCE Tél. 33(0)1 58 01 80 00 - Fax 33 (0)1 58 01 91 35 ISMP3- User Guide U S E R G U I D E User Guide • 2/31 Copyright © 2011 Ingenico 900021302 R11 000 01 All rights reserved Contents 1. Introduction __________________________________________________ 4 2. Unpacking ___________________________________________________ 5 3. Recommendations _____________________________________________ 6 3.1. Safety _______________________________________________________________ 6 Sécurité _________________________________________________________________ 6 Sicherheit ________________________________________________________________ 7 3.2. Security of your terminal _______________________________________________ 7 3.3. EC standard compliance marking _________________________________________ 8 3.4. FCC & IC Compliance. __________________________________________________ 8 3.4.1. Federal Communications Commission (FCC) Statement________________________________ 8 3.4.2. Industry Canada (IC) Statement. __________________________________________________ 9 3.5. Marking ____________________________________________________________ 11 3.6. Main Characteristics __________________________________________________ 12 4. Installation and connection _____________________________________ 13 4.1. Functional description ________________________________________________ 13 4.2. Battery insertion _____________________________________________________ 15 4.3. iPhone 6 insertion ____________________________________________________ 16 4.4. Charging ISMP3 ______________________________________________________ 18 4.5. Terminal in its environment ____________________________________________ 19 4.6. Power on / off _______________________________________________________ 19 4.7. Connection _________________________________________________________ 20 4.7.1. USB cable connection __________________________________________________________ 20 4.7.2. Cable disconnection ___________________________________________________________ 20 4.7.3. Multicradle ___________________________________________________________________ 21 4.8. Payment Integration with Bluetooth _____________________________________ 22 5. Daily use ____________________________________________________ 22 5.1. Getting started with ISMP3 ____________________________________________ 22 User Guide • 3/31 Copyright © 2011 Ingenico 900021302 R11 000 01 All rights reserved 5.2. ISMP3 keypad functions _______________________________________________ 23 5.3. Adjusting the contrast ________________________________________________ 23 5.4. Barcode reader ______________________________________________________ 24 5.5. Card insertion _______________________________________________________ 25 5.5.1. Swiping a card ________________________________________________________________ 25 5.5.2. Inserting a chip card ___________________________________________________________ 25 5.5.3. Reading Contactless (Optional) __________________________________________________ 25 6. Maintenance ________________________________________________ 27 6.1. Cleaning of the terminal _______________________________________________ 27 Entretien du terminal _____________________________________________________ 27 Wartung von Endgeräten __________________________________________________ 27 6.2. Transport and storage ________________________________________________ 28 6.3. Troubleshooting _____________________________________________________ 28 6.4. End of life ___________________________________________________________ 29 Fin de vie _______________________________________________________________ 29 Produktentsorgung _______________________________________________________ 29 User Guide • 4/31 Copyright © 2011 Ingenico 900021302 R11 000 01 All rights reserved 1. Introduction Thank you for choosing a payment terminal Ingenico. We recommend you to read carefully this installation guide: It gives you the necessary information about safety precautions, unpacking, installation, and maintenance of your terminal. WARRANTY / SECURITY To benefit from the guarantee-related product, and to respect the security, we ask you to use only accessories delivered in box with the product, entrusting maintenance operations only to an authorized person. ISMP3 is battery powered, use only Ingenico parts for replacement. ISMP3 can be powered by different sources please respect these recommendations: ISMP3 can be USB powered by using the power supply provided by Ingenico in the packaging. Failure to comply with these instructions will void the manufacturer’s responsibility. This symbol indicates an important Warning. This symbol indicates a piece of advice. User Guide • 5/31 Copyright © 2011 Ingenico 900021302 R11 000 01 All rights reserved 2. Unpacking ADVICE Carefully preserve the packaging of ISMP3. It must be re-used whenever the terminal is shipped. Products of ISMP3 range are named: IMP5xx According to the model, the following items are included in the ISMP3 box (including optional accessories): The user guide can be an option. WARNING The power supply unit provided with your equipment is specially designed for this Ingenico terminals. Do not use any other power supply. The use of a power supply with apparently similar voltage/current characteristics may damage your terminal. AVERTISSEMENT Dans le cas où vous choisiriez d’utiliser un bloc alimentation, assurez-vous de n’utiliser que le bloc d'alimentation qui a été conçu spécialement pour votre terminal. N'utilisez pas d'autre bloc d'alimentation. L'emploi d'un bloc d'alimentation présentant des caractéristiques apparemment similaires de tension/intensité peut endommager votre terminal. WARNHINWEIS Nur das Netzteil, das speziell für Ihr Gerät ausgelegt wurde, benutzen. Benutzen Sie kein anderes Netzteil. Die Benutzung eines Netzgeräts mit scheinbar ähnlicher Spannung/Stromstärke kann zur Beschädigung Ihres Terminals führen. ADVICE Your terminal…

Text truncated - open the document above for the full version.

www.ingenico.com 28/32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico – S.A. au capital de 53 086 309 € / 317 218 758 RCS PARIS ISMP3 - External pictures of the product. FRONT view of the product. BACK view of the product. LEFT view of the product. RIGHT view of the product. TOP view of the product. BOTTOM view of the product.

www.ingenico.com 28/32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico – S.A. au capital de 53 086 309 € / 317 218 758 RCS PARIS ISMP3 Terminal Label Fabrice Fleury (R&D) July the 20th, 2015 2/4 ISMP3 Terminal Label / July the 20th, 2015 Contents 1_ Label Drawing. ................................................................................. 3 1_1 Label for FCC and Industry Canada. ............................................................. 3 2_ Label Location .................................................................................. 4 3/4 ISMP3 Terminal Label / July the 20th, 2015 1_Label Drawing. The ISMP3 terminal label (Ingenico part number: 296190366) is shown below. This picture is taken from the 900021197_R40_000_02 drawing. 1_1 Label for FCC and Industry Canada. 4/4 ISMP3 Terminal Label / July the 20th, 2015 2_Label Location ISMP3 Label Location

www.ingenico.com 28/32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico – S.A. au capital de 53 086 309 € / 317 218 758 RCS PARIS ISMP3 - Internal pictures of the product. Figure #1 : Battery pack location Figure #2 : Iphone cover and Iphone holder Figure #3 : Inf Cover removed Figure #4 : Main board + Sup cover Figure #5 : Main board (Top view) Figure #6: Main Board (top view) Figure #7 : Electronics on the Top & Bottom side of the pcb Figure #8 : Electronics on the Top side of the pcb Figure #9 : Bottom side of the Main board Figure #10 : Bottom side of the Main board Figure #11 : Bottom side of the Main board : Power Management and 2 Secure Access Modules (or SAM)/ SAMs (Secure Access Module) are used to enhance the security and cryptography performances in the ISMP3 (in specific applications). Not to be confused with SIM Figure #12 : Bottom side of the Main board : Barcode electronics Figure #13 : Bluetooth transceiver area Figure #14 : Bluetooth transceiver

Tune Up Information FCC ID: XKB-IMP550BTCL This is to confirm that host (FCC ID: BCG-E2816A) SAR test report number 14U17673-S1C has been uploaded as an RF exposure exhibit to support this application. This is to allow reference to the conducted power tune up limits of the host device as part of the SAR evaluation of the sleeve /host device combination. UL

NVLAP LAB CODE 200065-0 SAR EVALUATION REPORT FCC 47 CFR § 2.1093 IEEE Std 1528-2013 For Payment Terminal FCC ID: XKB-IMP550BTCL Model Name: IMP550-11T3104A Report Number: 15U21940-S1V4 Issue Date: 10/30/2015 Prepared for INGENICO 9 Avenue de la Gare Rovaltain TGV BP 25156 Cedex 9 26958 Valence, France Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 Report No.: 15U21940-S1V4 Issue Date: 10/30/2015 Page 2 of 34 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Revision History Rev. Date Revisions Revised By V1 10/22/2015 Initial Issue -- V2 10/26/2015 Report Revised based on reviewer’s comments: 1. Sec. 2: Added remark for the KDB inquiry. 2. Sec. 6.2: Added RFID description/ 3. Sec. 10.1: Added note 3. 4. Appendix: Added Baseline SAR Test Plots. Ray Su V3 10/28/2015 1. Sec. 1: Updated Highest Reported SAR Values 2. Sec. 10.1: Updated Results tables per reviewer’s comment 3. Sec 12.1: Updated Sum of SAR table 4. App. C and G: Corrected plots. Coltyce Sanders V4 10/30/2015 Corrected references to test report 14U17673-S1C to 14U17673-S1C Dave Weaver Report No.: 15U21940-S1V4 Issue Date: 10/30/2015 Page 3 of 34 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Table of Contents 1. Attestation of Test Results ......................................................................................................... 5 2. Test Specification, Methods and Procedures ............................................................................ 6 3. Facilities and Accreditation ........................................................................................................ 6 4. SAR Measurement System & Test Equipment .......................................................................... 7 4.1. SAR Measurement System ........................................................................................................ 7 4.2. SAR Scan Procedures ............................................................................................................... 8 4.3. Test Equipment ........................................................................................................................ 10 5. Measurement Uncertainty ......................................................................................................... 11 6. Device Under Test (DUT) Information ...................................................................................... 12 6.1. DUT Description ...................................................................................................................... 12 6.2. Wireless Technologies ............................................................................................................. 13 6.3. Maximum Output Power .......................................................................................................... 14 7. RF Exposure Conditions (Test Configurations) ...................................................................... 14 8. Dielectric Property Measurements & System Check .............................................................. 15 8.1. Dielectric Property Measurements ........................................................................................... 15 8.2. System Check.......................................................................................................................... 21 9. Conducted Output Power Measurements ................................................................................ 25 10. Measured and Reported (Scaled) SAR Results ....................................................................... 26 10.1. Measured and Reported (Scaled) SAR Results .................................................................... 28 10.2. Bluetooth (Sleeve) ................................................................................................................ 31 Standalone SAR Test Exclusion Considerations & Estimated SAR ................................................. 31 11. SAR Measurement Variability ................................................................................................... 32 12. Simultaneous Transmission SAR Analysis ............................................................................. 33 12.1. Sum of the SAR for WWAN & Wi-Fi & BT............................................................................. 33 Appendixes .......................................................................................................................................... 34 15U21940-S1V1 SAR_App A Photos & Ant. Locations ...................................................................... 34 15U21940-S1V1 SAR_App B System Check Plots ............................................................................ 34 15U21940-S1V2 SAR_App C Highest Test Plots ............................................................................... 34 15U21940-S1V1 SAR_App D Tissue Ingredients ............................................................................... 34 15U21940-S1V1 SAR_App E Probe Cal. Certificates ......................................................................... 34 Report No.: 15U21940-S1V4 Issue Date: 10/30/2015 Page 4 of 34 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. 15U21940-S1V1 SAR_App F Dipole Cal. Certificates ........................................................................ 34 15U21940-S1V2 SAR_App G Baseline SAR Test Plots ..................................................................... 34 Report No.: 15U21940-S1V4 Issue Date: 10/30/2015 Page 5 of 34 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of …

Text truncated - open the document above for the full version.

Plot No. 1 Test Laboratory: UL Verification Services Inc. SAR Lab A Date/Time: 10/22/2015 5:04:28 AM 20151022_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2450 MHz; σ = 1.848 S/m; ε r = 37.773; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1357; Calibrated: 2/20/2015 - Probe: EX3DV4 - SN3901; ConvF(7.14, 7.14, 7.14); Calibrated: 1/27/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM v5.0 (B); Type: QD000P40CD; Serial: 1628 Head/Pin=100 mW/Area Scan (8x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 7.64 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.56 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 12.2 W/kg SAR(1 g) = 5.52 W/kg; SAR(10 g) = 2.47 W/kg Maximum value of SAR (measured) = 7.97 W/kg 0 dB = 7.97 W/kg = 9.01 dBW/kg Plot No. 2 Test Laboratory: UL Verification Services Inc. SAR Lab A Date/Time: 10/22/2015 5:24:00 AM 20151022_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 6.66 W/kg Plot No. 3 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/7/2015 3:18:08 PM 20151007_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2450 MHz; σ = 1.965 S/m; ε r = 51.215; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 7/30/2015 - Probe: EX3DV4 - SN3772; ConvF(6.58, 6.58, 6.58); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1258 Body/Pin=100 mW/Area Scan (8x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 6.55 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 61.661 V/m; Power Drift = 0.14 dB Peak SAR (extrapolated) = 11.1 W/kg SAR(1 g) = 5.37 W/kg; SAR(10 g) = 2.48 W/kg Maximum value of SAR (measured) = 7.63 W/kg 0 dB = 7.63 W/kg = 8.83 dBW/kg Plot No. 4 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/7/2015 3:38:42 PM 20151007_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 7.02 W/kg Plot No. 5 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/7/2015 4:04:11 PM 20151007_SystemPerformanceCheck-D2600V2 SN 1006 Frequency: 2600 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 2600 MHz; σ = 2.133 S/m; ε r = 50.778; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 7/30/2015 - Probe: EX3DV4 - SN3772; ConvF(6.35, 6.35, 6.35); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1258 Body/Pin=100 mW/Area Scan (8x8x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 7.12 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 65.334 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 12.7 W/kg SAR(1 g) = 5.75 W/kg; SAR(10 g) = 2.53 W/kg Maximum value of SAR (measured) = 8.40 W/kg 0 dB = 8.40 W/kg = 9.24 dBW/kg Plot No. 6 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/7/2015 4:25:14 PM 20151007_SystemPerformanceCheck-D2600V2 SN 1006 Frequency: 2600 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 7.79 W/kg Plot No. 7 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/8/2015 12:22:09 AM 20151008_SystemPerformanceCheck-D750V3 SN 1019 Frequency: 750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 750 MHz; σ = 0.98 S/m; ε r = 53.007; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 7/30/2015 - Probe: EX3DV4 - SN3772; ConvF(8.82, 8.82, 8.82); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA002AA; Serial: 1180 Body/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.907 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.885 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.811 W/kg; SAR(10 g) = 0.539 W/kg Maximum value of SAR (measured) = 0.983 W/kg 0 dB = 0.983 W/kg = -0.07 dBW/kg Plot No. 8 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/8/2015 12:57:45 AM 20151008_SystemPerformanceCheck-D750V3 SN 1019 Frequency: 750 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.921 W/kg Plot No. 9 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/8/2015 9:38:48 PM 10082015_SystemPerformanceCheck-D1900V2 SN 5d043 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1900 MHz; σ = 1.508 S/m; ε r = 52.813; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Ma…

Text truncated - open the document above for the full version.

Plot No. 1 Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 10/8/2015 12:34:45 AM GSM850_UAT Frequency: 836.6 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.944 S/m; ε r = 41.873; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3929; ConvF(8.67, 8.67, 8.67); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; LHS/Touch GPRS 2 Slots Channel 190 Accessory/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.667 W/kg LHS/Touch GPRS 2 Slots Channel 190 Accessory/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.920 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.738 W/kg SAR(1 g) = 0.591 W/kg; SAR(10 g) = 0.432 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.659 W/kg 0 dB = 0.659 W/kg = -1.81 dBW/kg Plot No. 2 Test Laboratory: UL Verification Services Inc. SAR Lab F Date/Time: 10/20/2015 8:59:43 PM GSM 850_LAT Frequency: 836.6 MHz; Duty Cycle: 1:8.00018; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.996 S/m; ε r = 53.07; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1359; Calibrated: 2/18/2015 - Probe: EX3DV4 - SN3929; ConvF(8.57, 8.57, 8.57); Calibrated: 4/22/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Rear with Accessory/GSM Voice_ch 190_0mm/Area Scan (9x17x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.00228 W/kg Rear with Accessory/GSM Voice_ch 190_0mm/Zoom Scan (6x7x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.354 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 0.00391 W/kg SAR(1 g) = 0.00162 W/kg; SAR(10 g) = 0.000434 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.00256 W/kg 0 dB = 0.00256 W/kg = -25.92 dBW/kg Plot No. 3 Test Laboratory: UL Verification Services Inc. SAR Lab H Date/Time: 10/9/2015 2:31:19 PM GSM 850_LAT Frequency: 836.6 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used (interpolated): f = 836.6 MHz; σ = 1.013 S/m; ε r = 54.288; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1472; Calibrated: 3/5/2015 - Probe: EX3DV4 - SN7335; ConvF(9.51, 9.51, 9.51); Calibrated: 3/13/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Edge 4 with Accessory/GPRS 2 Slots_ch 190/Area Scan (6x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.00526 W/kg Edge 4 with Accessory/GPRS 2 Slots_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.225 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 0.00982 W/kg SAR(1 g) = 0.00451 W/kg; SAR(10 g) = 0.00167 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.00594 W/kg 0 dB = 0.00594 W/kg = -22.26 dBW/kg Plot No. 4 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/9/2015 6:01:24 PM GSM 1900_UAT Frequency: 1909.8 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1910 MHz; σ = 1.423 S/m; ε r = 38.806; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1439; Calibrated: 7/30/2015 - Probe: EX3DV4 - SN3772; ConvF(7.45, 7.45, 7.45); Calibrated: 2/23/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: SAM with CRP; Type: SAM; RHS W_ Accessory/Touch_EGPRS 2 slots_ch 810/Area Scan (7x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.670 W/kg RHS W_ Accessory/Touch_EGPRS 2 slots_ch 810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.361 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 1.19 W/kg SAR(1 g) = 0.572 W/kg; SAR(10 g) = 0.304 W/kg Maximum value of SAR (measured) = 0.832 W/kg 0 dB = 0.832 W/kg = -0.80 dBW/kg Plot No. 5 Test Laboratory: UL Verification Services Inc. SAR Lab G Date/Time: 10/20/2015 8:22:50 PM GSM 1900_LAT Frequency: 1909.8 MHz; Duty Cycle: 1:8.00018; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C Medium parameters used: f = 1910 MHz; σ = 1.546 S/m; ε r = 52.143; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1433; Calibrated: 3/12/2015 - Probe: EX3DV4 - SN3991; ConvF(7.73, 7.73, 7.73); Calibrated: 5/19/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1258 Rear with Accessory/GPRS_Voice ch 810_0mm/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0324 W/kg Rear with Accessory/GPRS_Voice ch 810_0mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.735 V/m; Power Drift = 0.02 dB P…

Text truncated - open the document above for the full version.

Head Tissue Simulating Liquids Head Tissue Parameters according to IEEE Std 1528-2013 / IEC 62209 / FCC KDB 865664 D01 Narrow- Band Solutions (±5% tolerance) Product HSL300V2 HSL450V2 HSL750V2 HSL900V2 HSL1450V2 HSL1750V2 HSL1800V2 HSL1900V2 HSL1950V2 HSL2450V2 Test Frequency (MHz) 300 450 750 835, 900 1450, 1500, 1640 1750 1800, 1900 1900 1950, 2000 2450, 2600 Main Ingredients Water, Sugar Water, Sugar Water, Sugar Water, Sugar Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Broad- Band Solutions (±5% tolerance) Product HBBL30-250V3 HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL3500-5800V5 Test Frequency (MHz) 30-250 1400-1800 1750-1900 1950-3000 3500-5800 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Tween Water, Oil Body Tissue Simulating Liquids Body Tissue (Muscle) Parameters according to FCC KDB 865664 D01 Narrow- Band Solutions (±5% tolerance) Product MSL300V2 MSL450V2 MSL750V2 MSL900V2 MSL1450V2 MSL1750V2 MSL1800V2 MSL1900V2 MSL1950V2 MSL2450V2 Test Frequency (MHz) 300 400, 450 750 835, 900 1450, 1500, 1640 1750 1800, 1900 1900 1950, 2100 2450, 2600 Main Ingredients Water, Sugar Water, Sugar Water, Sugar Water, Sugar Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Broad- Band Solutions (±5% tolerance) Product MBBL130-250V3 MBBL1350-1850V3 MBBL1550-1950V3 MBBL1900-3800V3 MBBL3500-5800V5 Test Frequency (MHz) 130-250 1350-1800 1550-1850 1950-3800 3500-5800 Main Ingredients Water, Tween Water, Tween Water, Tween Water, Tween Water, Oil

Plot No. 1 Test Laboratory: UL Verification Services Inc. SAR Lab H Date/Time: 10/9/2015 2:15:20 PM GSM 850_Baseline LAT Frequency: 836.6 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C 3 Medium parameters used (interpo_Baseline LATed): f = 836.6 MHz; σ = 1.013 S/m; ε r = 54.288; ρ = 1000 kg/m DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1472; Calibrated: 3/5/2015 - Probe: EX3DV4 - SN7335; ConvF(9.51, 9.51, 9.51); Calibrated: 3/13/2015; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: SM 000 T01 DA; Serial: TP:1247 Edge 4 Baseline/GPRS 2 slots_ch 190/Area Scan (6x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpo_Baseline LATed medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.502 W/kg Edge 4 Baseline/GPRS 2 slots_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.752 V/m; Power Drift = -0.06 dB Peak SAR (extrapo_Baseline LATed) = 0.667 W/kg SAR(1 g) = 0.456 W/kg; SAR(10 g) = 0.303 W/kg Info: Interpo_Baseline LATed medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.555 W/kg 0 dB = 0.555 W/kg = -2.56 dBW/kg Plot No. 2 Extracted from original FCC report Plot No. 3 Test Laboratory: UL Verification Services Inc. SAR Lab E Date/Time: 10/9/2015 5:45:16 PM GSM 1900_Baseline UAT Frequency: 1909.8 MHz; Duty Cycle: 1:4.00037; Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C 3 Medium parameters used: f = 1910 MHz; σ = 1.423 S/m; ε r = 38.806; ρ …

Text truncated - open the document above for the full version.