XM2-VHPAVery High Power Module

Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Castel San Pietro Terme, 15 June 2012 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: XM2-VHPA Product Name: Very High Power Module Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: Schematic diagrams Block diagram Tune up information These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated 15 June 2012 By: ALESSANDRO BRUNELLI Signature Printed Title: CERTIFICATION ENGINEER On behalf of : TEKO TELECOM Telephone: +39 051 6946811

Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Castel San Pietro Terme, 15 June 2012 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: XM2-VHPA Product Name: Very High Power Module RESTRICTED ACCESS OF EQUIPMENT AND DOCUMENTATION NOTICE This Restricted Access of Equipment and Documentation Notice is to inform the licensee that access to equipment and related documentation supplied by Teko Telecom S.p.A. is to be restricted to only authorized users by means to ensure the security of the equipment and confidentiality of related documentation at all times, and only designated professionals shall be allowed to maintain or service the equipment. Tampering with the internal parts of these non-consumer type devices by removal of external covers can damage or destroy the equipment, therefore it is necessary that the device be kept in a restricted location, and inaccessible to the general public. This notice includes, but is not limited to, Schematic, Block Diagrams, User Manual, Tune Up information, and Internal Photos. Dated 15 June 2012 By: ALESSANDRO BRUNELLI Signature Printed Title: CERTIFICATION ENGINEER On behalf of : TEKO TELECOM Telephone: +39 051 6946811

Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Castel San Pietro Terme, 29 June 2012 Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: XM2-VHPA Product Name: Very High Power Module MODEL DIFFERENCE LETTER Very High Power Module is a single band booster. The Very High Power Module is used in the Service Front End 19/2U subrack, that hosts the duplexer, to be connected to the Service Antenna to separate/combine Downlink and Uplink paths. The same Very High Power Module is used in Very High Power Remote Units: the modular structure of these equipment can house from 1 to 3 VHPA modules, having as result a single, double or three bands remote unit. TEKO TELECOM CODE BAND UPLINK OPERATING FREQUENCY BAND DOWNLlNK OPERATING FREQUENCY BAND MODULATION MVHPA0001S7 SMR700 698 ÷ 716MHz + 776 ÷ 787MHz 728 ÷ 746 MHz + 746 ÷ 757 MHz LTE (QAM, QPSK) MVHPA0001S8 SMR800 806 ÷ 824 MHz 851 ÷ 869 MHz iDEN MVHPA0001AMPS AMPS 824 ÷ 849 MHz 869 ÷ 894 MHz GSM-EDGE- TDMA-CDMA- WCDMA-LTE (QAM, QPSK) MVHPA0001S9 SMR900 896 ÷ 902 MHz 935 ÷ 941 MHz iDEN MVHPA0001PCS PCS 1850 ÷ 1915 MHz 1930 ÷ 1995 MHz GSM-EDGE- TDMA-CDMA- WCDMA-LTE (QAM, QPSK) MVHPA0001AWS AWS 1710 ÷ 1755 MHz 2110 ÷ 2155 MHz CDMA- WCDMA-LTE (QAM, QPSK) Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Dated 29 June 2012 By: ALESSANDRO BRUNELLI Signature Printed Title: CERTIFICATION ENGINEER On behalf of : TEKO TELECOM Telephone: +39 051 6946811


     
          ! " #$ %&# &'%%( ) ! " #$ %# ' * "   

   %'&$ &% %+ ,-. ,// %'&$ &% % -0&& 1,,.2/.//. 3--  4/.3/5/./#%6 '.% %6 
EXTERNAL PHOTO VHPA0001S7

     
          ! " #$ %&# &'%%( ) ! " #$ %# ' * "   

   %'&$ &% %+ ,-. ,// %'&$ &% % -0&& 1,,.2/.//. 3--  4/.3/5/./#%6 '.% %6 
VHPA0001S8

     
          ! " #$ %&# &'%%( ) ! " #$ %# ' * "   

   %'&$ &% %+ ,-. ,// %'&$ &% % -0&& 1,,.2/.//. 3--  4/.3/5/./#%6 '.% %6 
VHPA0001S9

     
          ! " #$ %&# &'%%( ) ! " #$ %# ' * "   

   %'&$ &% %+ ,-. ,// %'&$ &% % -0&& 1,,.2/.//. 3--  4/.3/5/./#%6 '.% %6 
VHPA0001AMPS

     
          ! " #$ %&# &'%%( ) ! " #$ %# ' * "   

   %'&$ &% %+ ,-. ,// %'&$ &% % -0&& 1,,.2/.//. 3--  4/.3/5/./#%6 '.% %6 
VHPA0001PCS

     
          ! " #$ %&# &'%%( ) ! " #$ %# ' * "   

   %'&$ &% %+ ,-. ,// %'&$ &% % -0&& 1,,.2/.//. 3--  4/.3/5/./#%6 '.% %6 
VHPA0001AWS

     
          ! " #$ %&# &'%%( ) ! " #$ %# ' * "   

   %'&$ &% %+ ,-. ,// %'&$ &% % -0&& 1,,.2/.//. 3--  4/.3/5/./#%6 '.% %6 
Bottom Side is the same for all modules


 
           !"# $%! %& $$' (  !"# $! & ) 
 
*
*  " $& %# %$ "$+ ,-. ,//" $& %# %$ "$ -0%%"""" ""1,,.2/.//.3--* 4/.54.*6/7!""$8 """ $ ""$8 "" 

 

 


  







 
           !"# $%! %& $$' (  !"# $! & ) 
 
*
*  " $& %# %$ "$+ ,-. ,//" $& %# %$ "$ -0%%"""" ""1,,.2/.//.3--* 4/.54.*6/7!""$8 """ $ ""$8 "" 








 
           !"# $%! %& $$' (  !"# $! & ) 
 
*
*  " $& %# %$ "$+ ,-. ,//" $& %# %$ "$ -0%%"""" ""1,,.2/.//.3--* 4/.54.*6/7!""$8 """ $ ""$8 ""  
 

 


 



Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 INTERNAL PHOTO VHPA0001S7 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 VHPA0001S8 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 VHPA0001S9 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 VHPA0001AMPS Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 VHPA0001PCS Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004 VHPA0001AWS Teko Telecom S.p.A. Via Meucci, 24/a Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Qualità ed Ambiente certificato – ISO 9001:2000, ISO 14001:2004

Teko Telecom S.p.A. a Socio Unico Via Meucci, 24/A 40024 Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Gestione certificato secondo le norme ISO 9001:2008 ed ISO 14001:2004 GENERAL DESCRIPTION The amplifier is designed according to the feedforward technique, with the same basic pattern for all the standards (EGSM, AMPS, SMR, DCS, PCS, UMTS). It is made up of two printed circuit boards (PCB), one for the power stage, housing the two LDMOS transistors in balanced configuration, and the other far the driver stages, controI and communications circuits and power supply also. The main PCB is cut in the middle to provide room for the power stage. The main PCB is unique for all the standards, made up of FR4 substrate, the differences are on the value and kind of severaI components. The PCBs of the power section are however of three different kinds: one for EGSM, AMPS, SMR, realized on AR1000 substrate, one for DCS and PCS, and one for UMTS, both an DICLAD material. Teko Telecom S.p.A. a Socio Unico Via Meucci, 24/A 40024 Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Gestione certificato secondo le norme ISO 9001:2008 ed ISO 14001:2004 The amplifier module is used in the Service Front End 19/2U subrack, that hosts the duplexer, to be connected to the Service Antenna to separate/combine Downlink and Uplink paths. In Downlink the signals from the Donor Front-End Modules are combined and amplified by the Power Amplifier; in Uplink, the RF signal from the Service antenna is amplified by a Low Noise Amplifier (LNA) and split to feed up to 4 Donor Front End Modules. The same amplifier is used in Very High Power Remote Units: the modular structure of these equipment can house from 1 to 3 VHPA modules, having as result a single, double or three bands remote unit. In down-link, the optical signal coming from Master Unit is converted into RF signal by the Fiber Optic Receiver module. RF signal is then amplified by Very High Power amplifier(s), filtered and transmitted through an antenna or a passive distribution system. In up-link, RF signal is amplified by Low-Noise Amplifier, filtered and then converted into an optical signal by the Fiber Optic Transmitter module. Teko Telecom S.p.A. a Socio Unico Via Meucci, 24/A 40024 Castel S. Pietro Terme (BO) – Italy Tel +39 051 69 46 811 – Fax +39 051 94 84 73 P.IVA/VAT IT 02186561201 – Reg. Imprese di Bologna n. 02186561201 Capitale sociale Euro 660.000,00 i.v. – Soggetta a direzione e coordinamento di MetaSystem Group S.p.A. Società con Sistema di Gestione certificato secondo le norme ISO 9001:2008 ed ISO 14001:2004 TECHNICAL DESCRIPTION VHPA MODULES Teko Telecom CODE MVHPA 0001S7 MVHPA 0001AMPS MVHPA 0001S8 MVHPA 0001S9 MVHPA 0001PCS MVHPA 0001AWS Downlink RF Output Power GSM/TDMA (*) 43dBm (1 carrier) 43dBm (1 carrier) 40 dBm (2 carriers) 40 dBm (2 carriers) 31 dBm (4 carriers) 31 dBm (4 carriers) 34 dBm (8 carriers) 34 dBm (8 carriers) Downlink Output Power CDMA (*) WCDMA / L TE (*) 43dBm (1 carrier) 43dBm (1 carrier) 40 dBm (2 carriers) 40 dBm (2 carriers) 31 dBm (4 carriers) 31 dBm (4 carriers) 34 dBm (8 carriers) 34 dBm (8 carriers) Downlink Output Power iDEN (*) 43dBm (1 carrier) 40 dBm (2 carriers) 37 dBm (4 carriers) 34 dBm (8 carriers) RF output connector SMA (f) Cooling none Power supply 28 ÷ 30 Vdc Power consumption 300 W Operating temperature range -5°C up to +55°C (+23°F up to + 131°F) Weight ~ 1,5 kg (3,3 lb) Dimensions 132 * 271 * 30mm OPERATING FREQUENCY BANDS SUMMARY TABLE TEKO TELECOM CODE BAND UPLINK OPERATING FREQUENCY BAND DOWNLlNK OPERATING FREQUENCY BAND MODULATION MVHPA0001S7 SMR700 698 ÷ 716MHz + 776 ÷ 787MHz 728 ÷ 746 MHz + 746 ÷ 757 MHz LTE (QAM, QPSK) MVHPA0001S8 SMR800 806 ÷ 824 MHz 851 ÷ 869 MHz iDEN MVHPA0001AMPS AMPS 824 ÷ 849 MHz 869 ÷ 894 MHz GSM-EDGE- TDMA-CDMA- WCDMA-LTE (QAM, QPSK) MVHPA0001S9 SMR900 896 ÷ 902 MHz 935 ÷ 941 MHz iDEN MVHPA0001PCS PCS 1850 ÷ 1915 MHz 1930 ÷ 1995 MHz GSM-EDGE- TDMA-CDMA- WCDMA-LTE (QAM, QPSK) MVHPA0001AWS AWS 1710 ÷ 1755 MHz 2110 ÷ 2155 MHz CDMA-WCDMA- LTE (QAM, QPSK)

PART LIST OF SVHPADR01S8 (SMR800) IS THE SAME AS SVHPADR01AMPS (AMPS) PART LIST OF SVHPAFP01S8 (SMR800) IS THE SAME AS SVHPAFP01AMPS (AMPS) svhpadr01amps Monday, June 28, 2010 2:56 pm Page 1 # QTY REFDES CODICE MAGAZZINO DESCRIZIONE ----------------------------------------------------------------------------- 1 1 A2 2 1 A3 3 1 A4 4 1 A5 5 1 A7 6 1 A8 7 1 C1 05 075 0360 CONDENS. 10UF/35V 105° SIZE 5X5,4 SMD 8 1 C2 05 075 0360 CONDENS. 10UF/35V 105° SIZE 5X5,4 SMD 9 1 C3 05 040 0285 CHIP 4,7 UF X7R 16V SIZE 1210 10 1 C4 05 041 0185 CHIP 1 NF X7R 50V TOLL.J SIZE 0603 11 1 C5 05 041 0110 CHIP 47 PF COG 50V TOLL.J SIZE 0603 12 1 C6 05 040 0290 CHIP 4,7UF 50V X7R SIZE 1210 13 1 C7 05 051 0195 CHIP 22 PF LOW ESR 0603 250V 14 1 C8 05 051 0140 CHIP 3,9 PF LOW ESR 0603 250V 15 1 C9 05 075 0535 COND.ELETT. 47UF/50V SMD 105°C 6,3X7,7MM 16 1 C10 05 075 0535 COND.ELETT. 47UF/50V SMD 105°C 6,3X7,7MM 17 1 C13 05 075 0360 CONDENS. 10UF/35V 105° SIZE 5X5,4 SMD 18 1 C14 05 075 0535 COND.ELETT. 47UF/50V SMD 105°C 6,3X7,7MM 19 1 C15 05 040 0290 CHIP 4,7UF 50V X7R SIZE 1210 20 1 C18 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 21 1 C19 05 041 0270 CHIP 100 NF 16V TOLL.J X7R SIZE 0603 22 1 C20 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 23 1 C21 05 041 0270 CHIP 100 NF 16V TOLL.J X7R SIZE 0603 24 1 C22 05 050 0005 CHIP PORC A 0,5 PF 150V TOLL.B SIZEC11 25 1 C23 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 26 1 C24 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 27 1 C25 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 28 1 C26 05 075 0535 COND.ELETT. 47UF/50V SMD 105°C 6,3X7,7MM 29 1 C27 05 075 0360 CONDENS. 10UF/35V 105° SIZE 5X5,4 SMD 30 1 C28 05 075 0360 CONDENS. 10UF/35V 105° SIZE 5X5,4 SMD 31 1 C29 05 075 0360 CONDENS. 10UF/35V 105° SIZE 5X5,4 SMD 32 1 C30 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 33 1 C31 05 041 0270 CHIP 100 NF 16V TOLL.J X7R SIZE 0603 34 1 C32 05 041 0270 CHIP 100 NF 16V TOLL.J X7R SIZE 0603 35 1 C33 05 075 0360 CONDENS. 10UF/35V 105° SIZE 5X5,4 SMD 36 1 C34 05 090 0070 PASSANTE+FERRITE 2200PF NFE31PT222Z1E9L 37 1 C35 05 075 0455 100 UF/50V 105° SMD 8,3X8,3 38 1 C36 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 39 1 C37 05 075 0455 100 UF/50V 105° SMD 8,3X8,3 40 1 C38 05 040 0305 COND 22UF 16V X5R SIZE 1210 *R* 41 1 C40 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 42 1 C41 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 43 1 C42 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 44 1 C43 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 45 1 C44 05 040 0225 CHIP 330NF Y5V 50V TOLL.Z SIZE 1206 46 1 C45 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 47 1 C46 05 041 0130 CHIP 100 PF COG 50V TOLL.J SIZE 0603 48 1 C47 05 051 0115 CHIP 1,5 PF LOW ESR 0603 250V 49 1 C48 05 051 0115 CHIP 1,5 PF LOW ESR 0603 250V 50 1 C49 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 51 1 C50 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 52 1 C51 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 53 1 C52 05 050 0155 CHIP PORC A 100 PF 150V TOLL.J SIZEC11 54 1 C53 05 051 0235 CHIP 47 PF LOW ESR 0603 250V 55 1 C54 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 svhpadr01amps Monday, June 28, 2010 2:56 pm Page 2 # QTY REFDES CODICE MAGAZZINO DESCRIZIONE ----------------------------------------------------------------------------- 56 1 C57 05 050 0155 CHIP PORC A 100 PF 150V TOLL.J SIZEC11 57 1 C58 05 050 0155 CHIP PORC A 100 PF 150V TOLL.J SIZEC11 58 1 C61 05 050 0155 CHIP PORC A 100 PF 150V TOLL.J SIZEC11 59 1 C62 05 040 0203 CHIP 0,1 UF X7R 50V SIZE 0805 60 1 C63 05 040 0203 CHIP 0,1 UF X7R 50V SIZE 0805 61 1 C64 05 040 0203 CHIP 0,1 UF X7R 50V SIZE 0805 62 1 C65 05 040 0240 CHIP 1UF X7R 16V/25 TOLL.K SIZE 1206 63 1 C66 05 040 0203 CHIP 0,1 UF X7R 50V SIZE 0805 64 1 C67 05 041 0270 CHIP 100 NF 16V TOLL.J X7R SIZE 0603 65 1 C68 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 66 1 C69 TBD TBD 67 1 C70 05 041 0130 CHIP 100 PF COG 50V TOLL.J SIZE 0603 68 1 C72 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 69 1 C73 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 70 1 C74 05 041 0270 CHIP 100 NF 16V TOLL.J X7R SIZE 0603 71 1 C75 05 041 0130 CHIP 100 PF COG 50V TOLL.J SIZE 0603 72 1 C76 05 051 0195 CHIP 22 PF LOW ESR 0603 250V 73 1 C77 05 051 0195 CHIP 22 PF LOW ESR 0603 250V 74 1 C78 05 051 0195 CHIP 22 PF LOW ESR 0603 250V 75 1 C79 05 051 0105 CHIP 0,5PF LOW ESR 0603 250V 76 1 C80 05 051 0105 CHIP 0,5PF LOW ESR 0603 250V 77 1 C81 05 051 0235 CHIP 47 PF LOW ESR 0603 250V 78 1 C82 05 051 0235 CHIP 47 PF LOW ESR 0603 250V 79 1 C83 05 051 0255 CHIP 100 PF LOW ESR 0603 250V 80 1 C84 05 051 0255 CHIP 100 PF LOW ESR 0603 250V 81 1 C85 05 051 0255 CHIP 100 PF LOW ESR 0603 250V 82 1 C86 05 041 0130 CHIP 100 PF COG 50V TOLL.J SIZE 0603 83 1 C87 TBD TBD 84 1 C88 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 85 1 C89 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 86 1 C90 05 041 0130 CHIP 100 PF COG 50V TOLL.J SIZE 0603 87 1 C91 05 051 0235 CHIP 47 PF LOW ESR 0603 250V 88 1 C93 05 051 0235 CHIP 47 PF LOW ESR 0603 250V 89 1 C94 05 040 0285 CHIP 4,7 UF X7R 16V SIZE 1210 90 1 C95 05 041 0090 CHIP 22 PF COG 50V TOLL.J SIZE 0603 91 1 C96 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 92 1 C97 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 93 1 C98 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 94 1 C99 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 95 1 C100 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 96 1 C101 05 041 0090 CHIP 22 PF COG 50V TOLL.J SIZE 0603 97 1 C102 05 040 0280 CHIP 1 UF X7R 50V SIZE 1210 ROHS 98 1 C103 05 040 0305 COND 22UF 16V X5R SIZE 1210 *R* 99 1 C105 05 051 0105 CHIP 0,5PF LOW ESR 0603 250V 100 1 C106 05 040 0305 COND 22UF 16V X5R SIZE 1210 *R* 101 1 C111 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 102 1 C112 05 041 0220 CHIP 10 NF X7R 50V TOLL.J SIZE 0603 103 1 C113 05 051 0165 CHIP 8,2PF LOW ESR 0603 250V 104 1 C114 05 051 0235 CHIP 47 PF LOW ESR 0603 250V 105 1 C115 TBD TBD 106 1 C116 05 051 0255 CHIP 100 PF LOW ESR 0603 250V 107 1 C117 05 051 0255 CHIP 100 PF LOW ESR 0603 250V 108 1…

Text truncated - open the document above for the full version.

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:43.00(dBm) Maximum peak output power at antenna input terminal:19952.62315(mW) Antenna gain(maximum):8(dBi) Maximum antenna gain:6.309573445(numeric) Time Averaging:100(%) Prediction distance:150(cm) Prediction frequency:698(MHz) MPE limit for uncontrolled exposure at prediction frequency:0.465(mW/cm^2) Power density at prediction frequency:0.445254(mW/cm^2) Margin of compliance:-0.2(dB) This equates to:4.452537828W/m^2 2 4R PG S π =

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:43.00(dBm) Maximum peak output power at antenna input terminal:19952.62315(mW) Antenna gain(maximum):11.5(dBi) Maximum antenna gain:14.12537545(numeric) Time Averaging:100(%) Prediction distance:150(cm) Prediction frequency:2000(MHz) MPE limit for uncontrolled exposure at prediction frequency:1.000(mW/cm^2) Power density at prediction frequency:0.996799(mW/cm^2) Margin of compliance:0.0(dB) This equates to:9.967990556W/m^2 2 4R PG S π =

Nemko Italy S.p.A., Via del Carroccio 4, 20046, Biassono, Italy. Report number: 210165-7TRFWL Apparatus: VHPA0001PCS Applicant: TEKO Telecom S.p.A. Via Meucci, 24/a I-40024 Castel S. Pietro Terme (BO) FCC ID: XM2- VHPA Test specification: Title 47 – Telecommunication Chapter I – Federal Communications Commission Subchapter A – General Part 24 – Personal Communication Services Subpart E – Broadband PCS Reviewed by: 2012/06/11 Signature Date P. Barbieri, Wireless/EMC Specialist Reviewed by: 2012/06/11 Signature Date G. Curioni, Wireless/EMC Specialist Nemko S.p.A. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko S.p.A. accepts no responsibility for damages, if any suffered by any third party as a result of decisions made or actions based on this report. This report shall not be reproduced except in full without the written approval of the testing laboratory. . Nemko Italy S.p.A. Via del Carroccio 4, 20046, Biassono, Italy. Report number:210165-7TRFWL Specification: FCC 24 Subpart E Page 2 of 73 Table of contents Section 1: Report summary ................................................................................................................... 3 Section 2: Equipment under test .......................................................................................................... 4 2.1 Identification of equipment under test (EUT) ......................................................................... 4 2.2 Accessories and support equipment ..................................................................................... 4 2.3 EUT description .................................................................................................................... 5 2.4 Technical specifications of the EUT ...................................................................................... 5 2.5 EUT setup diagram ............................................................................................................... 6 2.6 Operation of the EUT during testing ..................................................................................... 6 2.7 Modifications incorporated in the EUT .................................................................................. 6 Section 3: Test conditions .................................................................................................................... 7 3.1 Deviations from laboratory tests procedures ......................................................................... 7 3.2 Test conditions, power source and ambient temperatures .................................................... 7 3.3 Measurement uncertainty ..................................................................................................... 7 3.4 Test equipment ..................................................................................................................... 8 Section 4: Result summary ................................................................................................................... 9 4.1 Test results .......................................................................................................…

Text truncated - open the document above for the full version.