XMR201403GC65GSM/GPRS Module

GC65 Hardware Design GSM/GPRS Module Series Rev. GC65_Hardware_Design_V2.0 Date: 2014-01-09 www.quectel.com GSM/GPRS Module Series GC65 Hardware Design GC65_Hardware_Design Confidential / Released 1 / 76 Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. Room 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233 Tel: +86 21 5108 6236 Mail: [email protected] Or our local office, for more information, please visit: http://www.quectel.com/support/salesupport.aspx For technical support, to report documentation errors, please visit: http://www.quectel.com/support/techsupport.aspx GENERAL NOTES QUECTEL OFFERS THIS INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. COPYRIGHT THIS INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL CO., LTD. TRANSMITTABLE, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THIS CONTENTS ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL OR DESIGN. Copyright © Quectel Wireless Solutions Co., Ltd. 2014. All rights reserved. GSM/GPRS Module Series GC65 Hardware Design GC65_Hardware_Design Confidential / Released 2 / 76 About the Document History Revision Date Author Description 1.0 2013-12-09 King HAO Initial 2.0 2014-01-09 King HAO 1. Update Figure 2：Pin assignment. 2. Modified the mechanical dimensions and the recommended footprint of the module in Chapter 6. 3. Update the function of SIM card detection. GSM/GPRS Module Series GC65 Hardware Design GC65_Hardware_Design Confidential / Released 3 / 76 Contents About the Document ................................................................................................................................... 2 Contents ....................................................................................................................................................... 3 Table Index ................................................................................................................................................... 5 Figure Index ................................................................................................................................................. 6 1 Introduction .......................................................................................................................................... 8 1.1. Safety Information ................................................................................................................... 8 2 Product Concept ................................................................................................................................ 10 2.1. General Description ............................................................................................................... 10 2.2. Directives and Standards ...................................................................................................... 10 2.2.1. FCC Statement ............................................................................................................... 10 2.2.2. FCC Radiation Exposure Statement .............................................................................. 11 2.3. Key Features ......................................................................................................................... 11 2.4. Functional Diagram ............................................................................................................... 13 2.5. Evaluation Board ................................................................................................................... 14 3 Application Interface ......................................................................................................................... 15 3.1. Pin of Module ......................................................................................................................... 16 3.1.1. Pin Assignment .............................................................................................................. 16 3.1.2. Pin Description ............................................................................................................... 17 3.2. Operating Modes ................................................................................................................... 21 3.3. Power Supply ........................................................................................................................ 22 3.3.1. Power Features of Module ............................................................................................. 22 3.3.2. Decrease Supply Voltage Drop ...................................................................................... 22 3.3.3. Reference Design for Power Supply .............................................................................. 23 3.3.4. Monitor Power Supply .................................................................................................... 24 3.4. Power On and Down Scenarios ............................................................................................ 24 3.4.1. Power On ....................................................................................................................... 24 3.4.2. Power Down ................................................................................................................... 26 3.…

Text truncated - open the document above for the full version.

RF_160, Issue 03 Declaration of Authorization We Name: Quectel Wireless Solutions Company Limited Address: Room 501, Building 13 No.99 TianZhou Road,Xuhui District,Shanghai,China City: Shanghai ............................................................................ Country: China............................................................................ Declare that: Name Representative of agent: Lily Wan (1) Agent Company name: Compliance Certification Services（Kunshan）Inc. Address: No. 10, Weiye Rd, Innovation Park, Eco&Tec Development Zone, Kunshan, Jiangsu, China 215300 City: Kunshan Country: China is authorized to apply for Certification of the following product(s): Product description: GSM/GPRS Module .................................................... Type designation: GC65.................................................... Trademark: Quectel .................................................... on our behalf. Date: 2014-05-20 ................................ City: Shanghai ................................ Name:Johnny xiang ................................ (2) Function: Manager ............................... Signature: ............................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Quectel Wireless Solutions Company Limited Address: Room 501, Building 13 No.99 TianZhou Road,Xuhui District,Shanghai,China City: Shanghai Country: China To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: XMR201403GC65 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2014-05-20 Name and signature of applicant: Johnny xiang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_734_00, Issue 1 Modular Approval Request FCC (per DA 00-1407) FCC ID: XMR201403GC10 Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes 3. The modular transmitter must have its own power supply regulation. Yes 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. Yes 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Yes 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, the modular met with RF exposure requirement. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or Name and surname of applicant (or Name and surname of applicant (or Name and surname of applicant (or authorized authorizedauthorized authorized representative): __________________ representative): __________________representative): __________________ representative): __________________ RF_734_00, Issue 1 Date: _____ Date: _____Date: _____ Date: _____2014/4/25 2014/4/252014/4/25 2014/4/25____ ________ ____ Signature: ___________________________ Signature: ___________________________Signature: ___________________________ Signature: ___________________________

Compliance Certification Services Inc. Reference No.: C140328R01-RPB Report No: C140331R02-RPB FCC ID: XMR201403GC65Date of Issue :April 23, 2014 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample Rev.01 Page 1 of 7 RF Exposure Evaluation Report For Product Name: GSM/GPRS Module Brand Name: Quectel Model No.: GC65 Series Model :N/A FCC ID:XMR201403GC65 Standards:FCC 47 CFR 2.1091 Test Report Number:C140331R02-RPB Issued for Quectel Wireless Solutions Co., Ltd. Room 501, Building 13, No.99 TianZhouRoad,Xuhui District, Shanghai Issued by Compliance Certification Services Inc. Kun shan Laboratory No.10 Weiye Rd., Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China TEL: 86-512-57355888 FAX: 86-512-57370818 Compliance Certification Services Inc. Reference No.: C140328R01-RPB Report No: C140331R02-RPB FCC ID: XMR201403GC65Date of Issue :April 23, 2014 Page 2 of 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ................................................................................................. 4 2 EUT DESCRIPTION...................................................................................................................... 5 3 RF Exposure Evaluation ............................................................................................................. 6 3.1. RF Exposure Compliance Requirement ............................................................................... 6 3.2. EUT RF Exposure Evaluation .............................................................................................. 7 Compliance Certification Services Inc. Reference No.: C140328R01-RPB Report No: C140331R02-RPB FCC ID: XMR201403GC65Date of Issue :April 23, 2014 Page 3 of 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 April 21, 2014 C140328R01-RPB ALL N/A 01 April 23, 2014 C140331R02-RPB Page 1, page 4 and page 5 only different model Compliance Certification Services Inc. Reference No.: C140328R01-RPB Report No: C140331R02-RPB FCC ID: XMR201403GC65Date of Issue :April 23, 2014 Page 4 of 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1 TEST RESULT CERTIFICATION Product Name: GSM/GPRS Module Brand Name: Quectel Model Name: GC65 Series Model : N/A Device Category: Mobile Device Applicant: Address: Quectel Wireless Solutions Co., Ltd. Room 501, Building 13, No.99 TianZhouRoad,Xuhui District, Shanghai Manufacturer: Address: Quectel Wireless Solutions Co., Ltd. Room 501, Building 13, No.99 TianZhouRoad,Xuhui District, Shanghai Date of Test: April 18, 2014 Test Result : Conform APPLICABLE STANDARDS Standard Test Result FCC 47 CFR 2.1091 No non-compliance noted U-NII devices are subject to the radio frequency radiation exposure requirements specified in §§2.1091 of this chapter, as appropriate. All equipment shall be considered to operate in a "general population/uncontrolled" environment. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement must be submitted to the Commission upon request. Tested by: Approved by: Blent.Wang Manager:Jeff.Fang Compliance Certification Services Inc. Reference No.: C140328R01-RPB Report No: C140331R02-RPB FCC ID: XMR201403GC65Date of Issue :April 23, 2014 Page 5 of 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 2 EUT DESCRIPTION Product Name: GSM/GPRS Module Brand Name: Quectel Model Name: GC65 Series Model : N/A Model Discrepancy: N/A Power Supply: DC 4.0V Frequency Range : GSM/GPRS 850: 824.20 ~ 848.80 MHz GSM/GPRS 1900: 1850.20 ~ 1909.80 MHz Transmit Power : GSM 850: 32.19 dBm GPRS 850: 32.13 dBm GSM 1900: 29.10 dBm GPRS 1900: 29.00 dBm Antenna Specification: dipole Antenna Gain: 1.0 dBi Note: for more details, please refer to the User’s manual of the EUT. Compliance Certification Services Inc. Reference No.: C140328R01-RPB Report No: C140331R02-RPB FCC ID: XMR201403GC65Date of Issue :April 23, 2014 Page 6 of 7 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 3 RF Exposure Evaluation 3.1. RF Exposure Compliance Requirement 3.1.1. Limits According 47 CFR 1.1310 FCC MPE limits for General population/Uncontrolled Exposure are showing in the Table1: Table1 Frequency Range Electric Field Strength [E] (V/m) Magnetic Field Strength [H](A/m) Power density [S](mW/cm²) Averaging time （min） 0.3 – 1.34 614 1.63 (100)* 30 1.34 – 30 824/f 2.19/f (180/f²)* 30 30 – 300 27.5 0.073 0.2 30 300 – 1500 ------- ------- f/1500 30 1500 – 100,000 ------- ------- 1 30 f = frequency in MHz * = Plane-wave equivalent Power Density The EUT will be only used with a separation of 20 cm or greater between the antennas and the user or nearby person and therefore can be consider a mobile transmitter per 47 CFR 2.1091(b). Due to deployment conditions, device has to comply with Maximum Permissible Exposure (MPE) limits for General Population/Uncontrolled Exposure. 3.1.2. Test Procedure Based on FCC Bulletin OET 65, the MPE calculations in case of multiple transmitters have been e performed on the following and assum…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Reference No.: C140328R01-RP1 Report No: C140331R02-RP1 FCC ID: XMR201403GC65 Date of Issue :April 23, 2014 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. Rev.01 Page 1 of 80 FCC 47 CFR PART 22 SUBPART H AND PART 24 SUBPART E TEST REPORT For Product Name: GSM/GPRS Module Brand Name: Quectel Model No.: GC65 Series Model: N/A Test Report Number: C140331R02-RP1 Issued for Quectel Wireless Solutions Co., Ltd. Room 501, Building 13, No.99 TianZhouRoad,Xuhui District, Shanghai Issued by Compliance Certification Services Inc. Kun shan Laboratory No.10 Weiye Rd., Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China TEL: 86-512-57355888 FAX: 86-512-57370818 Compliance Certification Services Inc. Reference No.: C140328R01-RP1 Report No: C140331R02-RP1 FCC ID: XMR201403GC65 Date of Issue :April 23, 2014 Page 2 of 80 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. REVISION HISTORY Rev. Issue Date Report NO. Effect Page Contents 00 April 21, 2014 C140328R01-RP1 ALL N/A 01 April 23, 2014 C140331R02-RP1 Page 1, page 4 and page 5 only different model Compliance Certification Services Inc. Reference No.: C140328R01-RP1 Report No: C140331R02-RP1 FCC ID: XMR201403GC65 Date of Issue :April 23, 2014 Page 3 of 80 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ........................................................................ 4 2 EUT DESCRIPTION ............................................................................................ 5 3 TEST METHODOLOGY ...................................................................................... 6 3.1. EUT CONFIGURATION........................................................................................................6 3.2. EUT EXERCISE..................................................................................................................6 3.3. GENERAL TEST PROCEDURES............................................................................................6 3.4. DESCRIPTION OF TEST MODES...........................................................................................6 4 INSTRUMENT CALIBRATION ............................................................................ 7 4.1. MEASURING INSTRUMENT CALIBRATION.........................................................................7 4.2. MEASUREMENT EQUIPMENT USED ..........................................................................7 4.3. MEASUREMENT UNCERTAINTY.................................................................................8 5 FACILITIES AND ACCREDITATIONS................................................................ 9 5.1. FACILITIES.......................................................................................................................9 5.2. EQUIPMENT......................................................................................................................9 5.3. ACCREDITATIONS.............................................................................................................9 6 SETUP OF EQUIPMENT UNDER TEST ........................................................... 10 6.1. SETUP CONFIGURATION OF EUT.......................................................................................10 6.2. SUPPORT EQUIPMENT .............................................................................................10 7 FCC PART 22 & 24 REQUIREMENTS.............................................................. 11 7.1. P EAK POWER.................................................................................................................11 7.2. AVERAGE POWER........................................................................................................13 7.3. ERP & EIRP MEASUREMENT.....................................................................................15 7.4. OCCUPIED BANDWIDTH MEASUREMENT ...............................................................19 7.5. OUT OF BAND EMISSION AT ANTENNA TERMINALS ..............................................32 7.6. FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT ............................45 7.7. FREQUENCY STABILITY V.S. TEMPERATURE MEASUREMENT............................71 7.8. REQUENCY STABILITY V.S. VOLTAGE MEASUREMENT ........................................74 7.9. POWERLINE CONDUCTED EMISSIONS...............................................................................76 APPENDIX I: PHOTOS OF EUT .............................................................................. 79 Compliance Certification Services Inc. Reference No.: C140328R01-RP1 Report No: C140331R02-RP1 FCC ID: XMR201403GC65 Date of Issue :April 23, 2014 Page 4 of 80 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. 1 TEST RESULT CERTIFICATION Product Name: GSM/GPRS Module Trade Name: Quectel Model Name.: GC65 Series Model: N/A Description Test Modes(worst case ): SIM1 is a chipset unit and tested as single chipset. Device Category: Production unit Date of Test: April 18, 2014 Applicant: Quectel Wireless Solutions Co., Ltd. Room 501, Building 13, No.99 TianZhouRoad,Xuhui District, Shanghai Manufacturer: Quectel Wireless Solutions Co., Ltd. Room 501, Building 13, No.99 TianZhouRoad,Xuhui District, Shanghai Application Type: Certification APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Reference No.: C140328R01 Report No: C140331R02 FCC ID: XMR201403GC65 Date of Issue : April 23, 2014 Page 1 / 2 TEST SETUP PHOTOGRAPHS OF EUT CONDUCTED EMISSION TEST RADIATED EMISSION TEST Compliance Certification Services Inc. Reference No.: C140328R01 Report No: C140331R02 FCC ID: XMR201403GC65 Date of Issue : April 23, 2014 Page 2 / 2 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services.