XMR2026KGM100XBWireless Module for Amazon Sidewalk

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Quectel Wireless Solutions Company Limited, FRN: 0018988279, Grantee Code: XMR (“the applicant”) certifies that, as of the date of the filing of application, Ikotek USA, Inc., FRN: 0033350331 (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are: Physical U.S. address: 9920 Pacific Heights Blvd., Ste. 150, #7025, San Diego, CA 92121 Email: [email protected] Phone: (+1) 858-344-8120 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Jean Hu Name: Joe Peterson Title: Certification Manager Title: President and CEO Email: [email protected] Email: [email protected] Date: 16 April, 2026 Date: 16 April, 2026

ApplicantDeclaration QSF27-14-04Rev1.4April25,2025Page 1 of 1 OriginalIssue:Jan.4,2021 SGSNorthAmericaInc. 620OldPeachtreeRoad SUITE100 Suwanee,Georgia30024 UnitedStates ApplicantLegalBusinessName QuectelWirelessSolutionsCompanyLimited Address No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China FRN 0018988279 GranteeCode XMR FCCID: XMR2026KGM100XB AuthorizedContactName JeanHu ContactPhone +8602150086326 ContactEmail [email protected] I,theundersigned,certifythatIamanauthorizedsignatoryfortheApplicantandthereforedeclare; a)inaccordancewith47CFR2.911(d),allofthestatementshereinandtheexhibitsattachedheretoaretrueandcorrecttothebestofmy knowledgeandbelief. b)inacceptingaGrantofEquipmentAuthorizationissuedbyaTCB,undertheauthorityoftheFCC,asaresultoftherepresentationsmadein thisapplication,theApplicantisresponsiblefor: (1)labelingtheequipmentwiththeexactFCCIDasspecifiedinthisapplication, (2)compliancestatementlabelingpursuanttotheapplicablerules, (3)complianceoftheequipmentwiththeapplicabletechnicalrules, c)iftheApplicantisnottheactualmanufactureroftheequipment,appropriatearrangementshavebeenmadewiththemanufacturertoensure thatproductionunitsofthisequipmentwillcontinuetocomplywiththeFCC’stechnicalrequirements. d)inaccordancewith47CFR2.909andKDB394321,theApplicanthasread,understoodandagreestoacceptthattheyaretheresponsible partyandagreetoabidebytheirresponsibilitiesasspecifiedunder47CFR2.909andKDB394321. e)inaccordancewithISO17065,FCCKDB641163,FCCKDB610077,KDB394321andRSP-100,theApplicanthasread,understood,accepts andagreestoabidebythepostmarketsurveillancerequirements. (1)theApplicantunderstands,acceptsandagreesthatasamplemayberequestedforsurveillancetesting. (2)theApplicantshallmakeprovisionstoalwayshaveaproductionsampleavailableuponrequestbySGS,FCCand/orISED. (3)theApplicantshall,uponrequestbySGS,attheApplicant’sexpense,provideaproductionsampleoftherequestedproducttoSGS, FCCand/orISEDasinstructed.Thesampleshallincludeallsupportdevices,cables,software,accessoriesorotherhardwareor softwarerequiredforevaluation,review,certificationandauditsurveillanceofproductscertifiedbySGS. f)neithertheApplicantnoranypartytotheapplicationissubjecttoadenialofFederalbenefits,thatincludesFCCbenefits,pursuanttoSection 5301oftheAnti-DrugAbuseActof1988,21U.S.C.§862becauseofaconvictionforpossessionordistributionofacontrolledsubstance.See 47CFR1.2002(b)forthedefinitionofa“party”forthesepurposes. g)theApplicanthasread,understood,acceptsandagreestoabidebytheSGSNorthAmerica,Inc.termsandconditionsasspecifiedintheTCB ApplicationForm731(QSF27-14-01). LinktoCFRs:https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 LinktoKDBs:https://apps.fcc.gov/oetcf/kdb/index.cfm LinktoRSP-100:https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html LinktotheCoveredList:CoveredList ApplicantSignature:Date:August6,2026 PrintName:JeanHu(August6,2026) Title:CertificationManager *NOTE:ThisdeclarationcannotbesignedbyanAgent,itshallbesignedbyanauthorizedpersonlistedintheFCCdatabase

FCCCOVEREDLISTDECLARATIONLETTER Page 1 of 1 Revision1.0 SGSNorthAmericaInc. 620OldPeachtreeRoad SUITE100 Suwanee,Georgia30024 UnitedStates ApplicantLegalBusinessNameQuectelWirelessSolutionsCompanyLimited AddressNo.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China FRN0018988279 GranteeCodeXMRFCCID:XMR2026KGM100XB AuthorizedContactNameJeanHu [email protected] QuectelWirelessSolutionsCompanyLimited(“theapplicant”)certifies: -theequipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. -asofthedateofthefilingoftheapplication,theapplicant[isnot]identifiedontheCoveredlist,establishedpursuantto§1.50002,asanentity producing“covered”equipment. -thesoftwaretobeloadedpriortomarketingoftheequipmentidentifiedaboveisnot“covered”softwaremanufacturedbyanyentityincluding predecessors,successors,parents,subsidiaries,affiliatesoranyentitywhichhasrebrandedorrelabeledthesoftwareproducedbytheentity(ies) identifiedonthe“CoveredList”. -thedeviceisnotcapableofstoringorrunningsoftwarelistedonthecoveredlistandthereforeisinherentlycompliant. LinktotheCoveredList:CoveredList ApplicantSignature:Date:August6,2026 PrintName: JeanHu(August6,2026) Title: CertificationManager *NOTE:ThisdeclarationcannotbesignedbyanAgent,itshallbesignedbyanauthorizedpersonlistedintheFCCdatabase

RF_734_02 04April16 ModularApprovalRequestFCC(KDB996369D01&Part15.212) FCCID:XMR2026KGM100XB Itemstobecoveredby Singlemodulartransmitters. Answerfromapplicant 1.ThemodulartransmittermusthaveitsownRFshielding.Yes,pleaseseeexhibition externalphotos 2.Themodulartransmittermusthavebufferedmodulation/datainputs(ifsuchinputs areprovided)toensurethatthemodulewillcomplywithPart15requirements underconditionsofexcessivedataratesorover-modulation. Yes,Themodularhasbuffer modulation/datainputs 3.Themodulartransmittermusthaveitsownpowersupplyregulation.Yes,pleaseseetheschematics 4.ThemodulartransmittermustcomplywiththeantennarequirementsofSection 15.203and15.204(b)(c).Theantennamusteitherbepermanentlyattachedor employa“unique”antennacoupler(atallconnectionsbetweenthemoduleandthe antenna,includingthecable). Yes,Therequirementsof antennaconnectorand spuriousemissionhavebeen fulfilled.Pleaserefertothe testreportexhibition. 5.Themodulartransmittermustbetestedinastand-aloneconfiguration,i.e.,the modulemustnotbeinsideanotherdeviceduringtesting.Thisisintendedto demonstratethatthemoduleiscapableofcomplyingwithPart15emissionlimits regardlessofthedeviceintowhichitiseventuallyinstalled. Yes,Pleaserefertothesetup photoexhibitionforthe stand-aloneconfiguration 6.Themodulartransmittermustbeequippedwitheitherapermanentlyaffixedlabel ormustbecapableofelectronicallydisplayingitsFCCidentificationnumberin accordancewith15.212(a)(1)(vi)(A)/(B). Yes,TheModulewillbelabel withitsownFCCID,andthe instructiononthelabelling ruleoftheendproducthas beenstatedintheuser manualofthismodule.please refertothelabelanduser manualexhibition. 7.Themodulartransmittermustcomplywithanyspecificruleoroperating requirementsapplicabletothetransmitterandthemanufacturermustprovide adequateinstructionsalongwiththemoduletoexplainanysuchrequirements.A copyoftheseinstructionsmustbeincludedintheapplicationforequipment authorization.Forexample,thereareverystrictoperationalandtiming requirementsthatmustbemetbeforeatransmitterisauthorizedforoperationunder Section15.231.Forinstance,datatransmissionisprohibited,exceptforoperation underSection15.231(e),inwhichcasethereareseparatefieldstrengthleveland timingrequirements.Compliancewiththeserequirementsmustbeassured. Yes,TherequiredFCCrule hasbeenfulfilledandallthe instructionformaintaining compliancehavebeenclearly statedintheusermanual. 8.ThemodulartransmittermustcomplywithanyapplicableRFexposure requirements.Forexample,FCCRulesinSections1.1310,2.1091,2.1093,and specificSectionsofPart15,including15.319(i),15.407(f),15.253(f)and 15.255(g),requirethatUnlicensedPCS,UNIIandmillimeterwavedevices performroutineenvironmentalevaluationforRFExposuretodemonstrate compliance.Inaddition,spreadspectrumtransmittersoperatingunderSection 15.247arerequiredtoaddressRFExposurecompliance.Modulartransmitters approvedunderotherSectionsofPart15,whennecessary,mayalsoneedto addresscertainRFExposureconcerns,typicallybyprovidingspecific installationandoperatinginstructionsforusers,installersandotherinterested partiestoensurecompliance. Yes,Pleasereferexhibition RFexposureforthe complianceofMPERF exposurerule. RF_734_02 04April16 Note:Alimitedmodularapproval(LMA)maybegrantedforsinglemodulartransmittersthat complypartiallywiththerequirementsabove. Sincerely, Client’ssignature: Client’sname/title:JeanHu(August6,2026)/CertificationManager Contactinformation/address:QuectelWirelessSolutionsCompanyLimited

QuectelWirelessSolutionsCompanyLimited Date:August6,2026 TO:FederalCommunicationCommission EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MID21046 Regarding:FCCID:XMR2026KGM100XB Towhomitmayconcern: We,theundersigned,herebyauthorizeParlamZhantoactonourbehalfinallmannersrelatingto applicationforequipmentauthorizationwithrespecttotheFCCIDabove,includingsigningofall documentsrelatingtothesematters.Anyandallactscarriedoutbytheagentonourbehalfshallhave thesameeffectasactsofourown. We,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits,thatincludes FCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.853(a). Whereouragentsignstheapplicationforcertificationonourbehalf,Iacknowledgethatallresponsibility forcomplyingwiththetermsandconditionsforCertification,asspecifiedbySGSNorthAmerica,Inc.,still resideswithQuectelWirelessSolutionsCompanyLimited. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. Signature: Name(Printed):JeanHu(August6,2026) Title:CertificationManager OnbehalfofCompany:QuectelWirelessSolutionsCompanyLimited Telephone:+86-021-51086236

Quectel Wireless Solutions Company Limited August 6, 2026 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Quectel Wireless Solutions Company Limited No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Regarding: Confidentiality Request regarding application for FCC ID: XMR2026KGM100XB LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User Manual Signature: Printed Name: Jean Hu(August 6, 2026) Title: Certification Manager Company Name: Quectel Wireless Solutions Company Limited

Report No.: KSCR260600132504 Page: 1 of 11 TRF No. CONN_001 A_Jun 1st ,2026 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2606001325AT FCC ID: XMR2026KGM100XB Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Equipment Under Test (EUT): EUT Name: Wireless Module for Amazon Sidewalk Model No.: KGM100XB Trade Mark: QUECTEL Standard(s) : FCC Rules 47 CFR §2.1091 KDB447498 D04 Interim General RF Exposure Guidance v01 Date of Receipt: 2026-06-05 Date of Test: 2026-07-09 to 2026-07-31 Date of Issue: 2026-08-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260600132504 Page: 2 of 11 TRF No. CONN_001 A_Jun 1st ,2026 Revision Record Version Description Date Remark 00 Original 2026-08-04 / Authorized for issue by: Tested By Tommie_Tang/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260600132504 Page: 3 of 11 TRF No. CONN_001 A_Jun 1st ,2026 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Details of E.U.T. ......................................................................................................................... 4 3.3 Test Location ............................................................................................................................ 5 3.4 Test Facility............................................................................................................................... 5 4 RF Exposure Test Exemptions ........................................................................................................ 6 4.1 FCC RF Exposure Test Exemptions for single RF sources ....................................................... 6 5 Measurement and Calculation ....................................................................................................... 10 5.1 Maximum transmit power ......................................................................................................... 10 5.2 RF Exposure Calculation ......................................................................................................... 11 Report No.: KSCR260600132504 Page: 4 of 11 TRF No. CONN_001 A_Jun 1st ,2026 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.3V FVIN: KGM100XBACR01A01M01 HVIN: KGM100XB 3.2 Details of E.U.T. BLE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Dipole Antenna Antenna Gain: 0.2dBi (Provided by the manufacturer) LoRa Operation Frequency: CSS_500KHz: 902.5MHz to 926.5MHz CSS_125KHz: 902.4MHz to 927.6MHz FSK_50kbps 902.2MHz to 927.8MHz FSK_150kbps 902.4MHz to 927.6MHz FSK_250kbps 902.5MHz to 927.5MHz Modulation Type: CSS, FSK Number of Channels: CSS_500KHz: 31 CSS_125KHz: 127 FSK_50kbps: 129 FSK_150kbps: 64 FSK_250kbps: 51 Channel Spacing: CSS_500KHz: 800KHz CSS_125KHz: 200KHz FSK_50kbps: 200KHz FSK_150kbps: 400KHz FSK_250kbps: 500KHz Antenna Type: Dipole Antenna Antenna Gain: 1.5dBi (Provided by the manufacturer) Report No.: KSCR260600132504 Page: 5 of 11 TRF No. CONN_001 A_Jun 1st ,2026 3.3 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g., max. internal working frequency, antenna gain, cable loss, etc) is provided by the applicant. (If applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (If applicable). 3. Sample source: sent by customer. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 2541.01) Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA). • FCC (Designation Number: CN1172) Compliance Certification Services (Kunshan) Inc. has been recognized as an accredited testing laboratory. • ISED (CAB Identifier: CN0072) Compliance Certification Services (Kunshan) Inc. has been recognized by Innovation, Science and Economic Development Canada (ISED) as an accredited testing laboratory. Company Number: 2324E • VCCI (Member No: 1938) The 3m and 10m Semi-anechoic chamber and Shielded Room of Compliance Certification Services (Kunshan) Inc. has been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-20134, R-11600, C-11707, T-11499, G-10216 respectively. Report No.: KSCR260600132504 Page: 6 of 11 TRF No. CONN_001 A_Jun 1st ,2026 4 RF Exposure Test Exemptions Test exemptions apply for devices used in general population/uncontrolled exposure environments, according to the SAR-based, or MPE-based exemption thresholds. 4.1 FCC RF Exposure Test Exemptions for single RF sources 4.1.1 Blanket 1 mW Blanket Exemption The 1 mW Blanket Exemption of §1.1307(b)(3)(i)(A) applies for single fixed, mobile, and portable RF sources with available maximum time-aver…

Text truncated - open the document above for the full version.

Product OC: YENT002W1AM Version: 2.2 Date: 2025-01-12 Status: Released Product Name: LPWA/ISM Terminal Mount Whip Dipole External Antenna Key Features: Frequency Band: 850–950 MHz Dimensions: 135 mm × 15.6 mm × 13 mm Efficiency: Up to 57.8 % (EVB) RoHS Compliant Antenna Datasheet Antenna Services YENT002W1AM Datasheet Antenna_Datasheet 1 / 21 Overview YENT002W1AM is an ISM external antenna measuring 135 mm × 15.6 mm × 13 mm. This ultra-wide-band ISM antenna provides broad coverage from 850–950 MHz. The antenna is terminated with RP SMA Male connector. This low profile, terminal mount omni–directional antenna, ideal for applications where the antenna is required to be discrete, is easy to install with maximum durability assured thanks to its PC + ABS enclosure. It is compatible with Quectel 's ISM Series modules. The antenna is designed as dipole type to work with various GND plane sizes or in free space for ease of integration with a hinged RP SMA Male connector to achieve the optimum position. Hinged structure helps to avoid other antennas or objects by rotating to different directions when mounted on terminals. This omni-directional antenna is ideally suited for security alerts, wireless data transmission, automated manufacturing, and many other IoT devices. ⚫ Typical applications include: ✓ Security Alerts ✓ Wireless Data-transmission ✓ Automated Manufacturing ✓ Industrial IoT Quectel provides comprehensive antenna design support such as simulation, testing and manufacturing for custom antenna solutions to meet your specific application needs. We have regional R & D centers to offer quick response to meet your requirements. Please contact our sales & FAEs if you have any requests. Antenna Services YENT002W1AM Datasheet Antenna_Datasheet 2 / 21 Contents Overview ...................................................................................................................................................... 1 Contents ...................................................................................................................................................... 2 1 Specification ........................................................................................................................................ 3 1.1. Electrical ..................................................................................................................................... 3 1.2. Mechanical & Environmental ..................................................................................................... 5 2 Drawing ................................................................................................................................................ 6 3 Detailed Performance ......................................................................................................................... 7 3.1. S-Parameter Test ....................................................................................................................... 7 3.1.1. VSWR ............................................................................................................................ 7 3.1.2. Return Loss .................................................................................................................... 8 3.2. Radiation Performance Test ....................................................................................................... 9 3.2.1. Efficiency ........................................................................................................................ 9 3.2.2. Average Gain ............................................................................................................... 10 3.2.3. Peak Gain .....................................................................................................................11 3.2.4. 3D & 2D Radiation Pattern .......................................................................................... 12 3.2.4.1. Test Condition: Free Space ................................................................................. 12 3.2.4.2. Test Condition: On 130 mm × 70 mm EVB ......................................................... 14 4 Packaging .......................................................................................................................................... 16 Contact Us................................................................................................................................................. 18 Legal Notices ............................................................................................................................................ 19 Revision History ....................................................................................................................................... 21 Antenna Services YENT002W1AM Datasheet Antenna_Datasheet 3 / 21 1 Specification Test Condition: Free Space & On 130 mm × 70 mm EVB 1.1. Electrical Electrical Frequency Range 850–950 MHz Impedance 50 Ω Polarization Linear Radiation Pattern Omni-directional Antenna Services YENT002W1AM Datasheet Antenna_Datasheet 4 / 21 Band Specification Band ISM Freq. (MHz) 850–950 Max. VSWR FS 4.2 EVB 4.3 Max. Return Loss (dB) FS -4.2 EVB -4.1 AVG Eff. (%) FS 42.6 EVB 51.7 AVG.AVG Gain (dB) FS -3.8 EVB -2.9 Max. Peak Gain (dBi) FS -0.6 EVB 1.5 VSWR FS ≤ 4.2 EVB ≤ 4.3 Return Loss FS ≤ -4.2 dB EVB ≤ -4.1 dB Peak Gain FS ≤ -0.6 dBi EVB ≤ 1.5 dBi ⚫ FS: Free Space. ⚫ EVB: On 130 mm × 70 mm EVB. Antenna Services YENT002W1AM Datasheet Antenna_Datasheet 5 / 21 1.2. Mechanical & Environmental Mechanical Antenna Dimensions 135 mm × 15.6 mm × 13 mm Material & Color PC + ABS & Black Connector Type RP SMA Male Mounting Type Terminal Weight Typ. 16 g Environmental Operation Temperature -40 °C to +85 °C Storage Temperature -40 °C to +85 °C RoHS Compliant Yes Antenna Services YENT002W1AM Datasheet Antenna_Datasheet 6 / 21 2 Drawing Antenna Services YENT002W1AM Datasheet Antenna_Datasheet 7 / 21 3 Deta…

Text truncated - open the document above for the full version.

Report No.: KSCR260600132501 Page: 1 of 90 TRF No. CONN_001 A_Jun 1st ,2026 TEST REPORT Application No.: KSCR2606001325AT FCC ID: XMR2026KGM100XB Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Equipment Under Test (EUT): EUT Name: Wireless Module for Amazon Sidewalk Model No.: KGM100XB Trade Mark: QUECTEL Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-06-05 Date of Test: 2026-07-09 to 2026-07-31 Date of Issue: 2026-08-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260600132501 Page: 2 of 90 TRF No. CONN_001 A_Jun 1st ,2026 Revision Record Version Description Date Remark 00 Original 2026-08-04 / Authorized for issue by: Prepared By Tommie_Tang/Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260600132501 Page: 3 of 90 TRF No. CONN_001 A_Jun 1st ,2026 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Report No.: KSCR260600132501 Page: 4 of 90 TRF No. CONN_001 A_Jun 1st ,2026 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 5 4.1 Details of E.U.T. ............................................................................................................................... 5 4.2 Power level setting using in test ....................................................................................................... 5 4.3 Description of Support Units ............................................................................................................ 5 4.4 Measurement Uncertainty ................................................................................................................ 6 4.5 Test Location .................................................................................................................................... 7 4.6 Test Facility ...................................................................................................................................... 7 4.7 Deviation from Standards ................................................................................................................. 7 4.8 Abnormalities from Standard Conditions .......................................................................................... 7 5 Equipment List ........................................................................................................................................ 8 6 Radio Spectrum Technical Requirement .............................................................................................. 9 6.1 Antenna Requirement ...................................................................................................................... 9 7 Radio Spectrum Matter Test Results .................................................................................................. 10 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ........................................................... 10 7.2 Radiated Emissions which fall in the restricted bands ................................................................... 14 7.3 Radiated Spurious Emissions Below 1GHz ................................................................................... 33 7.4 Radiated Spurious Emissions Above 1GHz ................................................................................... 37 7.5 Maximum Conducted Output Power .............................................................................................. 55 7.6 Minimum 6dB Bandwidth................................................................................................................ 57 7.7 Power Spectral Density .................................................................................................................. 58 7.8 Conducted Band Edges Measurement .......................................................................................... 59 7.9…

Text truncated - open the document above for the full version.