XMR2019SC650TNASmart Module

SC650T Hardware Design Smart LTE Module Series Rev: SC650T_Hardware_Design_V1.1 Date: 2019-03-01 Status: Preliminary www.quectel.com Smart LTE Module Series SC650T Hardware Design SC650T_Hardware_Design 1 / 131 Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local office. For more information, please visit: http://www.quectel.com/support/sales.htm For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm Or email to: [email protected] GENERAL NOTES QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL WIRELESS SOLUTIONS CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL OR DESIGN. Copyright © Quectel Wireless Solutions Co., Ltd. 2019. All rights reserved. Smart LTE Module Series SC650T Hardware Design SC650T_Hardware_Design 2 / 131 About the Document History Revision Date Author Description 1.0 2019-02-26 Arsene Initial Smart LTE Module Series SC650T Hardware Design SC650T_Hardware_Design 3 / 131 Contents About the Document ................................................................................................................................ 2 Contents .................................................................................................................................................... 3 Table Index ............................................................................................................................................... 6 Figure Index .............................................................................................................................................. 8 1 Introduction ..................................................................................................................................... 13 1.1. Safety Information .................................................................................................................. 14 2 Product Concept ............................................................................................................................. 15 2.1. General Description ................................................................................................................ 15 2.2. Key Features .......................................................................................................................... 16 2.3. Evaluation Board .................................................................................................................... 19 3 Application Interfaces ..................................................................................................................... 20 3.1. General Description ................................................................................................................ 20 3.2. Pin Assignment ....................................................................................................................... 21 3.3. Pin Description ....................................................................................................................... 22 3.4. Power Supply ......................................................................................................................... 39 3.4.1. Power Supply Pins ....................................................................................................... 39 3.4.2. Decrease Voltage Drop ................................................................................................ 39 3.4.3. Reference Design for Power Supply ............................................................................ 40 3.5. Turn on and off Scenarios ...................................................................................................... 41 3.5.1. Turn on Module Using the PWRKEY ........................................................................... 41 3.5.2. Turn off Module ............................................................................................................ 43 3.6. VRTC Interface ....................................................................................................................... 43 3.7. Power Output ......................................................................................................................... 44 3.8. Battery Charge and Management .......................................................................................... 45 3.9. USB Interface ......................................................................................................................... 47 3.10. UART Interfaces ..................................................................................................................... 49 3.11. (U)SIM Interfaces ................................................................................................................... 51 3.12. SD Card Interface .....................................................................................................…

Text truncated - open the document above for the full version.

QuectelWirelessSolutionsCompanyLimited DeclarationofAuthorization We Name:QuectelWirelessSolutionsCompanyLimited Address:Building5,ShanghaiBusinessParkPhaseIII,(AreaB), No.1016TianlinRoad,MinhangDistrict Declarethat: NameRepresentativeofagent:Ms.RileyWei AgentCompanyname:BTLInc. Address:No.29,JintangRoad,TangzhenIndustryParkPudongNewArea City:Shanghai Country:China isauthorizedtoapplyforCertificationofthefollowingproduct(s)andsigningalltherelated documentsincluding731forms: Productdescription:SmartModule Typedesignation:SC650T-NA Trademark:QUECTEL FCCID:XMR2019SC650TNA onourbehalf. Date:2020-02-22 City:Shanghai Name:JeanHu Function:CertificationSection Signature:

QuectelWirelessSolutionsCompanyLimited Date: FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:XMR2019SC650TNA PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: BlockDiagram Schematics OperationalDescription PartListsandTune-upinformation Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. Sincerely, ----------------------------------- GranteeContact’sSignature QuectelWirelessSolutionsCompanyLimited JeanHu

Quectel Wireless Solutions Company LimitedFCC Modular Approval Statement 1 Receiver Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Subject: Modular Approval Statement Date: Mar. 13, 2020 FCC Certification Number: XMR2019SC650TNA Model Name/Number: Smart Module/SC650T-NA TO WHOM IT MAY CONCERN Pursuant to Paragraphs CFR § 15.212, we herewith declare for our module. Modular approval requirementYesNo * (a) The radio elements must have the radio frequency circuitry be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. Yes *Please provide a detailed explanation if the answer is “No.”: (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable standard under conditions of excessive data rates or over- modulation. Yes *Please provide a detailed explanation if the answer is “No.”: (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Yes *Please provide a detailed explanation if the answer is “No.”: (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. Yes *Please provide a detailed explanation if the answer is “No.”: (e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing. Yes *Please provide a detailed explanation if the answer is “No.”: (f) The module shall comply with the Category I equipment labeling requirements and CFR § 15.212(a)(1)(vi). Yes *Please provide a detailed explanation if the answer is “No.”: QuectelWirelessSolutionsCompanyLimitedFCCModularApprovalStatement 2 (g)ThemoduleshallcomplywithapplicableRSS-102exposurerequirements andanyapplicableFCCRFexposurerequirementwhicharebasedonthe intendeduse/configurations. Yes *Pleaseprovideadetailedexplanationiftheansweris“No.”: (i)ThemodulartransmittercomplieswithallapplicableFCCrules.Instructions formaintainingcompliancearegivenintheuserinstructions. Yes Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow BestRegards, ____________________ (Signed) Name/Title:JeanHu/CertificationSection

QuectelWirelessSolutionsCompanyLimited AdHocModeDeclaration Date:2020-02-22 We,theundersignedcompany CompanyName:QuectelWirelessSolutionsCompanyLimited Address:Building5,ShanghaiBusinessParkPhaseIII,(AreaB), No.1016TianlinRoad,MinhangDistrict,shanghai,China. Declarethat: Productdescription:SmartModule Typedesignation:SC650T-NA Brand:QUECTEL FCCID:XMR2019SC650TNA 1.TheEUTdoesn’thaveAdHocModefunctionon“non-USfrequencies”.802.11a/nAdHoc modeshouldnotbesupportedevenonUSDFSfrequencies(5.25~5.35GHz/5.47~5.725GHz). 2.Inaddition,thefrequencyselectionfeatureisdisabledbyfirmwarefordevicesmarketedto theUS.TheproductmeetsallotherrequirementsspecifiedinPart15ESection15.407andno configurationcontrolsareprovidedtochangethefrequencyofoperationsoutsidethegrantof certificationforUSoperation. Ifyouhaveanyquestionsregardingtheauthorization,pleasedonothesitatetocontactus, thankyou~ Sincerely, Signature:________________________ Name:JeanHu Tel:+8602150086326 Email:[email protected]

Project No.: 2001H013 Page 1 of 6 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2001H013 Page 2 of 6 Test PCB board Photo-- SC650T-NA LTE Ant. Main LTE Ant. Div GPS Ant. BT/Wifi Ant. Project No.: 2001H013 Page 3 of 6 SC650T-NA

Label Label location

Project No.: 2001H013 Page 3 of 5 Project No.: 2001H013 Page 4 of 5 Project No.: 2001H013 Page 5 of 5

Report No.: BTL-FCCP-11-2001H013 Page 1 of 6 FCC RF EXPOSURE REPORT FCC ID: XMR2019SC650TNA Project No. : 2001H013 Equipment : Smart Module Brand Name : QUECTEL Test Model : SC650T-NA Series Model : N/A Applicant : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Date of Receipt : Jan. 15, 2020 Date of Test : Jan. 15, 2020~Feb. 27, 2020 Issued Date : Mar. 16, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH2020011452 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Iscaa Min Approved by : Krain Wu Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-11-2001H013 Page 2 of 6 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Mar. 16, 2020 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4G Wifi Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 Saintenna SAA31092A Dipole IPEX 5.38 For 5G Wifi Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 Saintenna SAA31092A Dipole IPEX 5.05 For BT: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA31092A Dipole IPEX 5.38 For LE Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA31092A Dipole IPEX 5.38 For LTE Band 2 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 1.59 For LTE Band 4 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 2 Report No.: BTL-FCCP-11-2001H013 Page 3 of 6 For LTE Band 5 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 2.53 For LTE Band 7 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 3 For LTE Band 12 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 3.95 For LTE Band 13 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 4.45 For LTE Band 14 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 4.45 For LTE Band 25 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 1.59 For LTE Band 26 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 3.19 For LTE Band 66 Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 Saintenna SAA30968A Dipole IPEX 2 Report No.: BTL-FCCP-11-2001H013 Page 4 of 6 2. TEST RESULTS For BT: Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.38 3.4514 8 6.3096 0.00433 1 Complies For LE: Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.38 3.4514 4 2.5119 0.00173 1 Complies For 2.4GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.38 3.4514 24 251.1886 0.17256 1 Complies For 5GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.05 3.1989 19 79.4328 0.05058 1 Complies For LTE Band 2 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density S) (mW/cm 2 ) Test Result 26.00 398.1072 0.07924 1 Complies For LTE Band 4 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density S) (mW/cm2) Test Result 26.00 398.1072 0.07924 1 Complies For LTE Band 7 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density S) (mW/cm2) Test Result 27.00 501.1872 0.09976 1 Complies For LTE Band 66 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density S) (mW/cm2) Test Result 27.00 501.1872 0.09976 1 Complies Report No.: BTL-FCCP-11-2001H013 Page 5 of 6 For LTE Band 25 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density S) (mW/cm2) Test Result 26.00 398.1072 0.07924 1 Complies For LTE Band 5 ERP=EIRP-2.15 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 26.15 412.0975 0.08203 1 Complies For LTE Band 26 ERP=EIRP-2.15 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 27.15 518.8000 0.10326 1 Complies For LTE Band 12 ERP=EIRP-2.15 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 28.15 653.1306 0.13000 1 Complies For LTE Band 13 ERP=EIRP-2.15 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 28.15 653.1306 0.13000 1 Complies For LTE Band 14 ERP=EIRP-2.15 Max EIRP (dBm) Max EIRP (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 28.15 653.1306 0.13000 1 Complies Report No.: BTL-FCCP-11-2001H013 Page 6 of 6 For the max simultaneous transmission MPE: BT+LE+2.4G+5G Power Density (S) (mW/cm 2 ) Power Density (S) (mW/cm 2 ) Power Density (S) (mW/cm 2 ) Power Density (S) (mW/cm 2 ) Total Limit of P…

Text truncated - open the document above for the full version.

Report No.:BTL-FCCP-4-2001H013 Page 1 of 76 FCC Radio Test Report FCC ID: XMR2019SC650TNA This report concerns: Original Grant Project No. : 2001H013 Equipment : Smart Module Brand Name : QUECTEL Test Model : SC650T-NA Series Model : N/A Applicant : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Date of Receipt : Jan. 15, 2020 Date of Test : Jan. 15, 2020~Feb. 27, 2020 Issued Date : Mar.16, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH2020011452 Standard(s) : FCC Part15, Subpart C (15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Iscaa Min Approved by : Krain Wu Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.:BTL-FCCP-4-2001H013 Page 2 of 76 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.:BTL-FCCP-4-2001H013 Page 3 of 76 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 DESCRIPTION OF TEST MODES 11 2.3 PARAMETERS OF TEST SOFTWARE 13 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.5 SUPPORT UNITS 13 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 14 3.1 LIMIT 14 3.2 TEST PROCEDURE 14 3.3 DEVIATION FROM TEST STANDARD 14 3.4 TEST SETUP 15 3.5 EUT OPERATING CONDITIONS 15 3.6 TEST RESULTS 15 4 . RADIATED EMISSION TEST 16 4.1 LIMIT 16 4.2 TEST PROCEDURE 17 4.3 DEVIATION FROM TEST STANDARD 17 4.4 TEST SETUP 18 4.5 EUT OPERATING CONDITIONS 19 4.6 TEST RESULTS - 30 MHZ TO 1000 MHZ 19 4.7 TEST RESULTS - ABOVE 1000 MHZ 19 5 . NUMBER OF HOPPING FREQUENCY 20 5.1 LIMIT 20 5.2 TEST PROCEDURE 20 5.3 DEVIATION FROM STANDARD 20 5.4 TEST SETUP 20 5.5 EUT OPERATION CONDITIONS 20 5.6 TEST RESULTS 20 Report No.:BTL-FCCP-4-2001H013 Page 4 of 76 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 21 6.1 LIMIT 21 6.2 TEST PROCEDURE 21 6.3 DEVIATION FROM STANDARD 21 6.4 TEST SETUP 21 6.5 EUT OPERATION CONDITIONS 21 6.6 TEST RESULTS 21 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 22 7.1 LIMIT 22 7.2 TEST PROCEDURE 22 7.3 DEVIATION FROM STANDARD 22 7.4 TEST SETUP 22 7.5 EUT OPERATION CONDITIONS 22 7.6 TEST RESULTS 22 8 . BANDWIDTH TEST 23 8.1 LIMIT 23 8.2 TEST PROCEDURE 23 8.3 DEVIATION FROM STANDARD 23 8.4 TEST SETUP 23 8.5 EUT OPERATION CONDITIONS 23 8.6 TEST RESULTS 23 9 . MAXIMUM OUTPUT POWER 24 9.1 LIMIT 24 9.2 TEST PROCEDURE 24 9.3 DEVIATION FROM STANDARD 24 9.4 TEST SETUP 24 9.5 EUT OPERATION CONDITIONS 24 9.6 TEST RESULTS 24 10 . CONDUCTED SPURIOUS EMISSION 25 10.1 LIMIT 25 10.2 TEST PROCEDURE 25 10.3 DEVIATION FROM STANDARD 25 10.4 TEST SETUP 25 10.5 EUT OPERATION CONDITIONS 25 Report No.:BTL-FCCP-4-2001H013 Page 5 of 76 Table of Contents Page 10.6 TEST RESULTS 25 11 . MEASUREMENT INSTRUMENTS LIST 26 12 . EUT TEST PHOTO 28 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 31 APPENDIX B - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 34 APPENDIX C - RADIATED EMISSION - ABOVE 1000 MHZ 37 APPENDIX D - NUMBER OF HOPPING FREQUENCY 58 APPENDIX E - AVERAGE TIME OF OCCUPANCY 60 APPENDIX F - HOPPING CHANNEL SEPARATION MEASUREMENT 65 APPENDIX G - BANDWIDTH 67 APPENDIX H - MAXIMUM OUTPUT POWER 69 APPENDIX I - CONDUCTED SPURIOUS EMISSION 72 Report No.:BTL-FCCP-4-2001H013 Page 6 of 76 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Mar.16, 2020 Report No.:BTL-FCCP-4-2001H013 Page 7 of 76 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.247) Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissio…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2001H013 Page 25 of 97 10. EUT TEST PHOTO Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2001H013 Page 26 of 97 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-1-2001H013 Page 27 of 97 Radiated Emissions Test Photos Above 1 GHz