XMR2020BG95M1LTE Cat M1 Module

LPWA Module Series BG95 Hardware Design BG95_Hardware_Design 1 / 80 BG95-M1 Hardware Design LPWA Module Series Rev. BG95_Hardware_Design_V1.0 Date: 2019-05-15 Status: Preliminary LPWA Module Series BG95 Hardware Design BG95_Hardware_Design 2 / 80 Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. 7 th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local office. For more information, please visit: http://www.quectel.com/support/sales.htm For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm Or email to: [email protected] GENERAL NOTES QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL WIRELESS SOLUTIONS CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL OR DESIGN. Copyright © Quectel Wireless Solutions Co., Ltd. 2019. All rights reserved. LPWA Module Series BG95 Hardware Design BG95_Hardware_Design 3 / 80 About the Document History Revision Date Author Description 1.0 2019-05-15 Lim PENG/ Garey XIE Initial LPWA Module Series BG95 Hardware Design BG95_Hardware_Design 4 / 80 Contents About the Document ................................................................................................................................ 3 Contents .................................................................................................................................................... 4 Table Index ............................................................................................................................................... 6 Figure Index .............................................................................................................................................. 8 1 Introduction ....................................................................................................................................... 9 1.1. Safety Information .................................................................................................................. 10 2 Product Concept ............................................................................................................................. 14 2.1. General Description ................................................................................................................ 14 2.2. Key Features .......................................................................................................................... 16 2.3. Functional Diagram ................................................................................................................ 19 2.4. Evaluation Board .................................................................................................................... 20 3 Application Interfaces ..................................................................................................................... 22 3.1. Pin Assignment ...................................................................................................................... 23 3.2. Pin Description ....................................................................................................................... 24 3.3. Operating Modes .................................................................................................................... 31 3.4. Power Saving ......................................................................................................................... 32 3.4.1. Airplane Mode .............................................................................................................. 32 3.4.2. Power Saving Mode (PSM).......................................................................................... 33 3.4.3. Extended Idle Mode DRX (e-I-DRX) ............................................................................ 34 3.4.4. Sleep Mode* ................................................................................................................ 34 3.4.4.1. UART Application .............................................................................................. 34 3.5. Power Supply ......................................................................................................................... 35 3.5.1. Power Supply Pins ....................................................................................................... 35 3.5.2. Decrease Voltage Drop ............................................................................................... 36 3.5.3. Monitor the Power Supply ............................................................................................ 37 3.6. Turn on and off Scenarios ...................................................................................................... 37 3.6.1. Turn on Module Using the PWRKEY Pin ..................................................................... 37 3.6.2. Turn off Module ............................................................................................................ 39 3.6.2.1. Turn off Module Using the PWRKEY Pi…

Text truncated - open the document above for the full version.

Quectel Wireless Solutions Co., Ltd Statement We Quectel Wireless Solutions Co., Ltd declare the following models. Product Name: Cat M1 Module Model Number: BG95-M3, BG95-M1 Hardware Version: R2.1 Module Category Supported Band BG95-M3 CatM1/NB‐IoT/ GSM/GPRS/EGPR S Cat M1: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/ B14/B18/B19/B20/B25/B26/B27/ B28/B66/B85 Cat NB2: LTE-FDD:B1/B2/B3/B4/B5/B8/B12/B13/ B18/B19/B20/B25/B26/ B28/B66/B71/B85 GSM/GPRS/ EGPRS: 850/900/1800/1900MHz BG95-M1 CatM1 Cat M1: LTE-FDD:B1/B2/B3/B4/B5/B8/B12/B13/ B14/B18/B19/B20/B25/B26/ B27/B28/B66/B85 BG95-M1 and BG95-M3 share the same HW design, BG95-M1 only do removal of the component for GSM/GPRS/EGPRS on the hardware network according to the model requirement of the product definition, and BG95-M1 disable NB by SW on the basis of BG95-M3. Des U60 U60 U50 U50 The You Sinc Nam Titl signator 02 03 02 04 e change wil ur assistance cerely, me:Jean Hu le:Certificat Q BG95- BG95-M3 (Part Des NA IC RF SW Qualband 5 IC RF 698-960M H RO IC RF T 1.0x0.5mm ll not impac e on this ma u tion Section Quectel Wire M3 3 scription) WITCH SP1 5.3x5.5mm H LOW PAS Hz 1.0x0.5m TX LPF 16 m H0.5mm RO ct RF perfor atter is high n eless Solut 10T + GSM H0.905mm RO SS FILTER mm H0.4mm 695-2180MH O rmance of C ly appreciat tions Co., L BG BG95-M (Part D IC RF Coupler 1.0x0.5 m M O NA R m NA z NA Cat M1 . ted. td G95-M1 M1 escription) THIN-FILM 450M mm H0.3mm R ) M Directiona MHz-3800MH RO al Hz

Quectel Wireless Solutions Company Limited XMR201910BG95M3 cover letter We Quectel Wireless Solutions Co., Ltd declare the following models. Product Name: Cat M1 Module Model Number: BG95‐M3, BG95‐M1 Hardware Version: R2.1 BG95‐M3 FCC ID : XMR201910BG95M3, date of grant :10/17/2019 Orginal model : BG95‐M3 Module Category Supported Band FCC rule parts BG95‐M3 CatM1/NB‐IoT/ GSM/GPRS/EGPRS Cat M1: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/ B14/B18/B19/B20/B25/B26/B27/ B28/B66/B85 Cat NB2: LTE-FDD:B1/B2/B3/B4/B5/B8/B12/B13/ B18/B19/B20/B25/B26/ B28/B66/B71/B85 GSM/GPRS/ EGPRS: 850/900/1800/1900MHz 22H/24E/ 27/90 BG95‐M1 CatM1 Cat M1: LTE-FDD:B1/B2/B3/B4/B5/B8/B12/B13/ B14/B18/B19/B20/B25/B26/ B27/B28/B66/B85 22H/24E/ 27/90 BG95‐M1 and BG95‐M3 share the same HW design, BG95‐M1 only do removal of the component for GSM/GPRS/EGPRS on the hardware network according to the model requirement of the product definition, and BG95‐M1 disable NB by SW on the basis of BG95‐M3. BG95‐M3 BG95‐M1 Designator BG95-M3 (Part Description) BG95-M1 (Part Description) U602 NA IC RF THIN-FILM Directional Coupler 450MHz-3800MHz 1.0x0.5mm H0.3mm RO U603 IC RF SWITCH SP10T + GSM Qualband 5.3x5.5mm H0.905mm RO NA U502 IC RF LOW PASS FILTER 698-960MHz 1.0x0.5mm H0.4mm RO NA U504 IC RF TX LPF 1695-2180MHz 1.0x0.5mm H0.5mm RO NA The change will not impact RF performance of Cat M1 . Please see all report updates below : BG95‐M1 (Report No.: R1907A0450‐R1V2) is a variant model of BG95‐M3 (Report No.: R1907A0446‐R1V1). Test values partial duplicated from Original for variant. There is only tested RF Power Output, Effective Radiated Power, Occupied Bandwidth and Radiates Spurious Emission for variant in this report. BG95‐M1 (Report No.: R1907A0450‐R2V2) is a variant model of BG95‐M3 (Report No.: R1907A0446‐R2). Test values partial duplicated from Original for variant. There is only tested RF Power Output, Effective Isotropic Radiated Power, Occupied Bandwidth and Radiates Spurious Emission for variant in this report. BG9 R190 RF P Spur BG9 R190 RF P Emis BG9 R190 RF P Emis BG9 R190 RF P Emis Da t By: Titl e On Tel e 95‐M1 (Repor 07A0446‐R3V Power Output rious Emissio 95‐M1 (Repor 07A0446‐R7) Power Output ssion for vari 95‐M1 (Repor 07A0446‐R8) Power Output ssion for vari 95‐M1 (Repor 07A0446‐R11 Power Output ssion for vari ted e: Projec behalf of : ephone: rt No.: R1907 V1). Test valu t, Effective Is on for variant rt No.: R1907 ). Test values t, Effective R iant in this re rt No.: R1907 ). Test values t, Effective R iant in this re rt No.: R1907 1). Test value t, Effective R iant in this re 202 S ct Manager (Qu e Limite +8 7A0450‐R3V2 ues partial du sotropic Radi t in this repo 7A0450‐R4V2 partial dupli Radiated Pow eport. 7A0450‐R5V2 partial dupli Radiated Pow eport. 7A0450‐R6V2 es partial dup Radiated Pow eport. 20/3/10 Signature ectel W ed) 86‐21‐51086 2) is a variant uplicated from ated Power, rt. 2) is a variant icated from O wer , Occupied 2) is a variant icated from O wer, Occupied 2) is a variant plicated from wer, Occupied Wireless 236 ext 6511 t model of BG m Original fo Occupied Ba t model of BG Original for v d Bandwidth t model of BG Original for v d Bandwidth a t model of BG Original for d Bandwidth a Solutions 1 G95‐M3 (Rep or variant. Th andwidth and G95‐M3 (Rep variant. There and Radiate G95‐M3 (Rep variant. There and Radiates G95‐M3 (Rep variant. The r and Radiates Jean Hu ort No.: ere is only t e d Radiates ort No.: e is only teste es Spurious ort No.: e is only teste s Spurious ort No.: re is only test s Spurious Printed ested ed ed ted

Mo (a) (b) (c)Th own Quec 7 th Floor, Ho Decla A ppli FCC I Mode The s requi odular app The radio e their own capacitors m elements. The buffered m provided) to 15 requirem or over-mod he modular t n powersupp ctel Wirel ngye Building, No.1 aration of cant / Gr a ID: el: single mod rements u proval req elements of t shielding. T may be loca modular modulation/da o ensure tha ments under dulation. transmitter m ply regulation ess Solu 1801 Hongmei Roa the Modu antee dule trans under Part quirement the modular The physica ated external transmitte ata inputs t the modul e conditions o must have its n. utions Co ad, Xuhui District, S lar Approv Quectel W XMR2020B BG95‐M1 smitter has t 15C Sect transmitter m al crystal a l to the shie er must (if such i n e will comply f excessive ompany Shanghai 200233, C val ireless Solut G95M1 s been eva tion 212 a must have nd tuning lded radio have nputs are y with part data rates Limited ChinaEmail: info@q tions Compa aluated th s below: EUT C The radio e transmitter h The modula integrated in schematic.p All power lin device are r other circuit Please see quectel.comWebsite any Limited hen tested Condition elements of t have their ow ar has buffere n chip. Pleas pdf nes derived f regulated bef ts internal to schematic. p e: www.quectel.com meeting t the modular wn shielding. ed data inpu se see from the host fore energizi the BG95-M pdf mpage 1 the C o p . Y E ts, it is YE t ing M1. Y E om ply ES ES ES (d) w S m a a in m p (e)T i in p b re li m th li le th s s s S 1 (f)Th (g) (h)T w Quec 7 th Floor, Ho The with the ante Sections 15. must either b antenna cou and the ante nstallation” p modules but paragraph (b he modu in a stand-al nside anothe part 15 requi battery powe equirements ines and dat must not con he module ines shall b ength is unk here is no c supporting e support equip shall be un Section 15.31(i))must he mo equipped w be capable identification The modula with any sp ordinarily a p manufacture with the mod of these inst equipmenta ntendeduse / he modular t with any appl ctel Wirel ngye Building, No.1 modular enna and tra 203, 15.204 be permanen pler (at all enna, includ provision of S can apply to ) of this sect ular trans one configur er device d rements. U n red, it must c s found in S ta input/outp ntain ferrites, (see Sectio n e the length known, at le coupling betw equipment. A pment conne nmodified a tnotbeinsidea odular with either a p e of elect n number. ar transmitter ecific rules o pply to a com er must provi dule to expla tructions mus uthorizationr /configuratio transmitter m licable RF ex ess Solu 1801 Hongmei Roa transmitter ansmission sy 4(b) and 15 ntly attached connections ing the ca b Section 15.2 o limited mo ion. smitter m ration, i.e., th uring testing nless the tran comply with Section 15.2 put lines con unless they n 15.27(a)). h typical of east 10 cent ween the ca Any access ected to the nd comme r anotherdevic transmitter permanently tronically d r must compl or operating r mplete transm ide adequate ain any suchr st be include requirements ons. must comply xposure requ utions Co ad, Xuhui District, S r must ystem requir 5.204(c). The d or employ a between th ble). The “pr 03 is not ap odular approv must be he module m g for compli nsmitter mod the AC line c 07. AC or D nnected to th y will be mar The length actual use timeters to in ase of the m ories, perip module dur i rcially availa ceduringtesti must affixed labe displaying it y requirements mitter and the e instructions requirements ed in the app s,whichareba uirements in ompany Shanghai 200233, C comply rements of e antenna a “unique” he module rofessional plicable to vals under tested must not be iance with dule will be conducted DC power he module rketed with h of these or, if that nsure that odule and herals, or ing testing able (see ng. be l or must ts FCC s that e s along s. A copy lication for asedonthei its final Limited ChinaEmail: info@q A permanen antenna con licensed mo The BG95-M alone config extender. P The label po indicated. If cannot be s the host lab Contains FC Please see The BG95-M applicable F are given in The BG95-M the applicab quectel.comWebsite ntly attached nnector is no odules. M1was teste guration via a lease see sp osition of BG fthe FCC ID seen when it bel must inclu CC ID: XMR2 the label.pdf M1 is complia FCC rules. D the User Ma M1 is approv ble RF expos e: www.quectel.com antenna or ot a requirem d in a stand a PCMCIA purious set‐ G95-M1 is cle of the modu is installed, t ude the text: 2020BG95M f ant with all Detail instruct anual. ved to comply sure requirem mpage 2 unique ment for Y E ‐ up YE early ule then 1. Y E tions Y E y with ment, Y E ES ES ES ES ES c Quec 7 th Floor, Ho configuration Dated By: Title: On be h Teleph ctel Wirel ngye Building, No.1 . Project M half of : one: ess Solu 1801 Hongmei Roa 2020/3 Sign Manager ( Quectel Limited) +86‐2 utions Co ad, Xuhui District, S 3/9 nature l Wireless S 21‐51086236 ompany Shanghai 200233, C Solutions 6 ext 6511 Limited ChinaEmail: info@q please see as the dista Jean quectel.comWebsite the MPE eva nce restrictio n Hu Pri e: www.quectel.com aluation with on. rinted mpage 3 20cm

Quectel Wireless Solutions Company Limited 7 th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, ChinaEmail: [email protected]: www.quectel.compage 1 Request for Confidentiality Date: _2020/3/9_ Subject: Confidentiality Request for: _____ FCC ID: XMR2020BG95M1 ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term PermanentBlock Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ______ FCC ID: XMR2020BG95M1 _____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Jean Hu (Signature/Title 2 ) (Print name)

7 th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, ChinaEmail: [email protected]: www.quectel.compage 1 Quectel Wireless Solutions Company Limited POWER OF ATTORNEY DATE: March 12, 2020 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 We, the undersigned, hereby authorize TA Technology (Shanghai) Co., Ltd. /Han jinnan on our behalf, to apply to FCC on our equipment for FCC ID: XMR2020BG95M1. Any and all acts carried out by TA Technology (Shanghai) Co., Ltd. / Han jinnan on our behalf shall have the same effect as acts of our own. Sincerely, Signature: Print name: Jen Hu Company: Quectel Wireless Solutions Company Limited

EUT Appearance Report No.: R1907A0450 TA Technology (Shanghai) Co., Ltd. Page 1 of 1 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance a: EUT Picture 1: Constituents of EUT

FCC ID ： XMR2020BG95M1

MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR2020BG95M1 Product LTE Cat M1 Module Brand Quectel Marketing Quectel BG95-M1 Model BG95-M1 Report No. R1907A0450-M1V2 Issue Date March 12, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE Test Report Report No.: R1907A0450-M1V2 TA Technology (Shanghai) Co., Ltd. Page 2 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory................................................................................................ ............................... 3 1.1 Notes of the Test Report................................................................................................ ......... 3 1.2 Test facility................................................................................................ .............................. 3 1.3 Testing Location................................................................................................ ...................... 4 1.4 Laboratory Environment................................................................................................ .......... 4 2 Description of Equipment under Test................................................................ .............................. 5 3 Maximum conducted output power (measured) and antenna Gain................................ ................ 6 4 Test Result................................................................................................................................ ..... 7 ANNEX A : Product Change Description .............................................................................................. 11 MPE Test Report Report No.: R1907A0450-M1V2 TA Technology (Shanghai) Co., Ltd. Page 3 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. MPE Test Report Report No.: R1907A0450-M1V2 TA Technology (Shanghai) Co., Ltd. Page 4 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] 1.4 Laboratory Environment Temperature Min. = 18°C, Max. = 25 °C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5 Ω Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R1907A0450-M1V2 TA Technology (Shanghai) Co., Ltd. Page 5 of 12 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd Applicant address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer Quectel Wireless Solutions Co., Ltd Manufacturer address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 General Technologies Model BG95-M1 IMEI 864622040009090 Hardware Version R2.1 Software Version BG95M1LAR02A02 Date of Testing: August 20, 2019 ~ September 5, 2019 Note: 1. The EUT is sent from the applicant to TA and the information of the EUT is declared by the applicant. 2. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. Note: This revised report (Report No.: R1907A0450-M1V2) supersedes and replaces the previously issued report (Report No.: R1907A0450-M1V1). Please discard or destroy the previously issued report and dispose of it accordingly. BG95-M1 (Report No.: R1907A0450-M1V2) is a variant model of BG95-M3 (Report No.: R1907A0446-M1). Test values duplicated from Original for variant. There is no test for variant in this report. The detailed product change description please refers to the ANNEX A. MPE Test Report Report No.: R1907A0450-M1V2 TA Technology (Shanghai) Co., Ltd. Page 6 of 12 This report sh…

Text truncated - open the document above for the full version.

RF TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR2020BG95M1 Product LTE Cat M1 Module Brand Quectel Marketing Quectel BG95-M1 Model BG95-M1 Report No. R1907A0450-R1V2 Issue Date March 13, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2019)/ FCC CFR 47 Part 22H (2019). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 RF Test Report Report No.: R1907A0450-R1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 2 of 41 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ...................................................................................................................................... 4 1.1. Notes of the Test Report ............................................................................................................... 4 1.2. Test facility ..................................................................................................................................... 4 1.3. Testing Location ............................................................................................................................ 5 2. General Description of Equipment under Test ....................................................................................... 6 3. Applied Standards .................................................................................................................................. 7 4. Test Configuration .................................................................................................................................. 8 5. Test Case Results .................................................................................................................................. 9 5.1. RF Power Output and Effective Radiated Power .......................................................................... 9 5.2. Occupied Bandwidth ................................................................................................................... 12 5.3. Band Edge Compliance ............................................................................................................... 16 5.4. Peak-to-Average Power Ratio (PAPR) ....................................................................................... 23 5.5. Frequency Stability ...................................................................................................................... 25 5.6. Spurious Emissions at Antenna Terminals ................................................................................. 28 5.7. Radiates Spurious Emission ....................................................................................................... 34 6. Main Test Instruments ......................................................................................................................... 39 ANNEX A: Product Change Description ...................................................................................................... 40 RF Test Report Report No.: R1907A0450-R1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-05-001R Page 3 of 41 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Summary of measurement results No. Test Case Clause in FCC rules Verdict 1 RF Power Output and Effective Radiated Power 2.1046 22.913(a)(5) PASS 2 Occupied Bandwidth 2.1049 PASS 3 Band Edge Compliance 2.1051 / 22.917(a) Refer to the Original 4 Peak-to-Average Power Ratio 22.913(d)/ KDB 971168 D01(5.7) Refer to the Original 5 Frequency Stability 2.1055 / 22.355 Refer to the Original 6 Spurious Emissions at Antenna Terminals 2.1051 / 22.917(a) Refer to the Original 7 Radiates Spurious Emission 2.1053 / 22.917 (a) PASS Date of Testing: August 20, 2019 ~ September 5, 2019 and December 25, 2019 ~ January 8, 2020 Note: All indications of Pass/Fail in this report are opinion…

Text truncated - open the document above for the full version.