XMR202106EG91AUXLTE Module

EG91 Series Hardware Design LTE Standard Module Series Version: 1.9 Date: 2020-08-24 Status: Preliminary www.quectel.com LTE Standard Module Series EG91 Series Hardware Design EG91_Series_Hardware_Design 1 / 102 Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local office. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm or email to [email protected]. GENERAL NOTES QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. DISCLAIMER WHILE QUECTEL HAS MADE EFFORTS TO ENSURE THAT THE FUNCTIONS AND FEATURES UNDER DEVELOPMENT ARE FREE FROM ERRORS, IT IS POSSIBLE THAT THESE FUNCTIONS AND FEATURES COULD CONTAIN ERRORS, INACCURACIES AND OMISSIONS. UNLESS OTHERWISE PROVIDED BY VALID AGREEMENT, QUECTEL MAKES NO WARRANTIES OF ANY KIND, IMPLIED OR EXPRESS, WITH RESPECT TO THE USE OF FEATURES AND FUNCTIONS UNDER DEVELOPMENT. TO THE MAXIMUM EXTENT PERMITTED BY LAW, QUECTEL EXCLUDES ALL LIABILITY FOR ANY LOSS OR DAMAGE SUFFERED IN CONNECTION WITH THE USE OF THE FUNCTIONS AND FEATURES UNDER DEVELOPMENT, REGARDLESS OF WHETHER SUCH LOSS OR DAMAGE MAY HAVE BEEN FORESEEABLE. COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL WIRELESS SOLUTIONS CO., LTD. TRANSMITTING, REPRODUCING, DISSEMINATING AND EDITING THIS DOCUMENT AS WELL AS USING THE CONTENT WITHOUT PERMISSION ARE FORBIDDEN. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL OR DESIGN. Copyright © Quectel Wireless Solutions Co., Ltd. 2020. All rights reserved. LTE Standard Module Series EG91 Series Hardware Design EG91_Series_Hardware_Design 2 / 102 About the Document Revision History Version Date Author Description 1.0 2017-03-22 Felix YIN/ Yeoman CHEN/ Jackie WANG Initial 1.1 2018-01-23 Felix YIN/ Rex WANG 1. Added band B28A. 2. Updated the description of UMTS and GSM features in Table 2. 3. Updated the functional diagram in Figure 1. 4. Updated module operating frequencies in Table 21. 5. Updated current consumption in Table 26. 6. Updated RF output power in Table 27. 7. Updated the conducted RF receiving sensitivity in Table 28. 8. Updated the GPRS multi-slot classes in Table 33. 9. Added thermal consideration in Chapter 5.8 10. Added a GND pad in each of the four corners of the module’s footprint in Chapter 6.2. 11. Updated storage information in Chapter 7.1. 12. Added packaging information in Chapter 7.3. 1.2 2018-03-14 Felix YIN/ Rex WANG 1. Added the description of EG91-NA. 2. Updated the functional diagram in Figure 1. 3. Updated pin assignment in Figure 2. 4. Updated GNSS function in Table 1. 5. Updated GNSS Features in Table 2. 6. Updated reference circuit of USB interface in Figure 21. 7. Added description of GNSS receiver in Chapter 4. LTE Standard Module Series EG91 Series Hardware Design EG91_Series_Hardware_Design 3 / 102 8. Updated pin definition of RF antenna in Table 21. 9. Updated module operating frequencies in Table 22. 10. Added description of GNSS antenna interface in Chapter 5.2. 11. Updated antenna requirements in Table 25. 12. Updated RF output power in Table 32. 1.3 2019-02-03 Ward WANG/ Nathan LIU/ Rex WANG 1. Added new variants EG91-NS, EG91-V, EG91-EC and related contents. 2. Opened pin 24 as ADC0 and added related contents. 3. Updated functional diagram (Figure 1) 4. Updated pin assignment (Figure 2) 5. Updated GNSS features (Table 2) 6. Added USB_BOOT interface information (Chapter 3.18) 7. Updated storage information (Chapter 8.1) 8. Updated module operating frequencies (Table 23) 9. Updated antenna requirements (Table 26) 10. Added current consumption of EG91-NS, EG91-V and EG91-EC (Table 32, 33 and 34) 11. Added conducted RF receiving sensitivity of EG91-NS, EG91-V and EG91-EC (Table 39, 40 and 41) 1.4 2019-03-29 Ward WANG 1. Modified module name EG91-EC to EG91-EX, and EG91-V to EG91-VX 2. Added newly supported 9.x of Android USB serial driver (Table 2) 3. Modified the reflow temperature range as . 238ºC~245ºC (Chapter 8.2) 1.5 2019-05-24 Ward WANG/ Nathan LIU 1. Updated comment of RF antenna (Table 4) 2. Updated EG91-EX current consumption (Table 36) 3. Updated EG91-EX conducted RF receiving sensitivity (Table 43) 1.6 2019-07-05 Ward WANG 1. Updated supported protocols (Table 2). 2. Updated timing of turning on module (Figure 12). 3. DFOTA is developed. 4. Updated description of USB_BOOT interface and timing sequence for entering emergency download mode (Chapter 3.18 LTE Standard Module Series EG91 Series Hardware Design EG91_Series_Hardware_Design 4 / 102 and Figure 29). 1.7 2019-08-09 Fanny CHEN/ Rex WANG 1. Added ThreadX variant EG91-NAX and updated related contents (Table 1 and 4, Chapter 2.2, 2.3, 3.2 and 5). 2. Added related notes of SPI interface not supported on ThreadX modules (Chapter 3.1, 3.3 and 3.13). 3. Added current consumption of EG91-NAX (Table 37). 4. Updated EG91-NA conducted RF receiving sensitivity (Table 41). 5. Updated EG91-NS conducted RF receiving sensitivity (Table 42). 6. Added EG91-NAX conducted RF receiving sensitivity (Table 45). 1.8 2019-11-07 Rex WANG 1. Removed related information of ThreadX O…

Text truncated - open the document above for the full version.

Quectel Wireless Solutions Company Limited Declaration of Authorization We Name: Quectel Wireless Solutions Company Limited Address: Building 5, Shanghai Business Park PhaseIII, (Area B), No.1016 Tianlin Road, Minhang District, Shanghai China, 200233 Declare that: Name Representative of agent: Ms. Riley Wei Agent Company name: BTL Inc. Address: No. 29, Jintang Road, Tangzhen Industry Park Pudong New Area City: Shanghai Country: China is authorized to apply for Certification of the following product(s) and signing all the related documents including 731 forms: Product description: LTE Module Type designation: EG91-AUX Trademark: Quectel FCC ID: XMR202106EG91AUX on our behalf. Date: 2021-04-27 City: Shanghai Name: Jean Hu Function: Certification Section Signature:

Quectel Wireless Solutions Company Limited Date: 2021/04/27 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XMR202106EG91AUX Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description Part Lists and Tune-up information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ----------------------------------- Grantee Contact’s Signature Quectel Wireless Solutions Company Limited Jean Hu

Quectel Wireless Solutions Company Limited FCC Modular Approval Statement 1 Receiver Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Subject: Modular Approval Statement Date: 2021/04/27 FCC Certification Number: XMR202106EG91AUX Model Name/Number: LTE Module / EG91-AUX TO WHOM IT MAY CONCERN Pursuant to Paragraphs CFR § 15.212, we herewith declare for our module. Modular approval requirement Yes No * (a) The radio elements must have the radio frequency circuitry be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. Yes *Please provide a detailed explanation if the answer is “No.”: (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable standard under conditions of excessive data rates or over- modulation. Yes *Please provide a detailed explanation if the answer is “No.”: (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Yes *Please provide a detailed explanation if the answer is “No.”: (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. Yes *Please provide a detailed explanation if the answer is “No.”: (e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing. Yes *Please provide a detailed explanation if the answer is “No.”: (f) The module shall comply with the Category I equipment labeling requirements and CFR § 15.212(a)(1)(vi). Yes *Please provide a detailed explanation if the answer is “No.”: Quectel Wireless Solutions Company Limited FCC Modular Approval Statement 2 (g) The module shall comply with applicable RSS-102 exposure requirements and any applicable FCC RF exposure requirement which are based on the intended use/configurations. Yes *Please provide a detailed explanation if the answer is “No.”: (i) The modular transmitter complies with all applicable FCC rules. Instructions for maintaining compliance are given in the user instructions. Yes If you have any questions, please feel free to contact us at the address shown below Best Regards, ____________________ (Signed) Name / Title: Jean Hu/ Certification Section

Project No.: 2009H029B Page 1 of 6 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2009H029B Page 2 of 6 GNSS Ant. 2/3/4G Main Ant.

Label Label location

Project No.: 2009H029B Page 3 of 6 Project No.: 2009H029B Page 4 of 6 Project No.: 2009H029B Page 5 of 6 Project No.: 2009H029B Page 6 of 6

Report No.: BTL-FCCP-4-2009H029B Page 1 of 6 FCC RF EXPOSURE REPORT FCC ID: XMR202106EG91AUX Project No. : 2009H029B Equipment : LTE Module Brand Name : Quectel Test Model : EG91-AUX Series Model : N/A Applicant : Quectel Wireless Solutions Company Limited Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Date of Receipt : Apr. 16, 2021 Date of Test : Apr. 16, 2021 ~ May 10, 2021 Issued Date : Jun. 01, 2021 Report Version : R01 Test Sample : Engineering Sample No.: SH2021041698 for Radiated; SH2020091134 for Conducted; SH2020091134-2 for adapter. Standard(s) : FCC Title 47 Part 2.1091 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Maker Qi Approved by : Issac Song Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-4-2009H029B Page 2 of 6 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue May 27, 2021 R01 Revised report to address TCB’s comments. Jun. 01, 2021 Report No.: BTL-FCCP-4-2009H029B Page 3 of 6 1 TEST FACILITY The test facilities used to collect the test data in this report is at the location of No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China BTL's Test Firm Registration Number for FCC: 476765 BTL's Designation Number for FCC: CN1241 2. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Report No.: BTL-FCCP-4-2009H029B Page 4 of 6 3. TEST RESULTS Band Burst Turn up Power(dBm) Division Factors(dB) Time-Averaged Tune up Power(dBm) GSM 850 35.00 -9.03 25.97 PCS 1900 32.00 -9.03 22.97 Note: Division Factors To average the power, the division factor is as follow: 1Txslot=1 transmit time slot out of 8 time slots= ＞conducted power divided by(8/1) =＞-9.03dB 2Txslot=2 transmit time slot out of 8 time slots= ＞conducted power divided by(8/2) =＞-6.02dB 3Txslot=3 transmit time slot out of 8 time slots= ＞conducted power divided by(8/3) =＞-4.26dB 4Txslot=4 transmit time slot out of 8 time slots=＞conducted power divided by(8/4) =＞-3.01dB For GSM 850 Antenna Gain (dBi) Antenna Gain (numeric) AVG Tune up Output Power (dBm) AVG Tune up Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 7.00 5.01190 25.97 395.3666 0.39421400 0.55 Complies For PCS 1900 Antenna Gain (dBi) Antenna Gain (numeric) AVG Tune up Output Power (dBm) AVG Tune up Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.00 1.99530 22.97 198.1527 0.07865700 1 Complies For WCDMA Band 2 Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3.00 1.99530 25.00 316.2278 0.12552700 1 Complies For WCDMA Band 5 Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 7.00 5.01190 25.00 316.2278 0.31530600 0.55 Complies Report No.: BTL-FCCP-4-2009H029B Page 5 of 6 For LTE Band 2 Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm2) Test Result 3.00 1.99530 25.00 316.2278 0.12552700 1 Complies For LTE Band 4 Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.00 3.1623 25.00 316.2278 0.19894500 1 Complies For LTE Band 5 Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm2) Test Result 7.00 5.01190 25.00 316.2278 0.31530600 0.55 Complies For LTE Band 7 Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 8.00 6.3096 25.00 316.2278 0.39694600 1 Complies For LTE Band 66 Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.00 3.1623 25.00 316.2278 0.19894500 1 Complies For BT: Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 5.00 3.1623 15.00 31.6228 0.019894 1 Complies For 2.4GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 6.00 3.98110 24.00 251.1886 0.198945 1 Complies Report No.: BTL-FCCP-4-2009H029B Page 6 of 6 For 5GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 6.00 3.98110 24.00 251.1886 0.198945 1 Complies For the max simultaneous transmission MPE: Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) CPD/LPD Note 0.019894 1 0.019894 BT 0.198945 1 0.198945 2.4G 0.198945 1 0.198945 5G GSM 0.394214 0.55 0.716753 GSM 850 0.078657 1 0.078657 PCS 1900 WCDMA 0.125527 1 0.125527 Band II 0.315306 0.55 0.573284 Band V LT E 0.125527 1 0.125527 Band 2 0.198945 1 0.198945 Band 4 0.315306 0.55 0.573284 Band 5 0.39…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2009H029B Page 1 of 67 FCC Radio Test Report FCC ID: XMR202106EG91AUX This report concerns: Original Grant Project No. : 2009H029B Equipment : LTE Module Brand Name : Quectel Test Model : EG91-AUX Series Model : N/A Applicant : Quectel Wireless Solutions Company Limited Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Date of Receipt : Apr. 16, 2021 Date of Test : Apr. 16, 2021 ~ May 10, 2021 Issued Date : Jun. 01, 2021 Report Version : R01 Test Sample : Engineering Sample No.: SH2021041698 for Radiated; SH2020091134 for Conducted; SH2020091134-2 for adapter. Standard(s) : 47 CFR FCC Part 22 Subpart H 47 CFR FCC Part 2 ANSI/TIA/EIA-603-E-2016 FCC KDB 971168 D01 Power Meas License Digital Systems v03r01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Maker Qi Approved by : Issac Song Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-1-2009H029B Page 2 of 67 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and is not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2009H029B Page 3 of 67 Table of Contents Page REPORT ISSUED HISTORY 5 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 1.4 TEST DATA RE-USE SUMMARY 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 DESCRIPTION OF TEST MODES AND TEST CONDITION 11 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATIONOFSYSTEMTESTED 13 3.4 DESCRIPTION OF SUPPORT UNITS 13 3 . TEST RESULT 14 3.1 OUTPUT POWER MEASUREMENT 14 3.1.1 LIMIT 14 3.1.2 TEST PROCEDURE 14 3.1.3 TEST SETUP LAYOUT 14 3.1.4 TEST DEVIATION 14 3.1.5 TEST RESULTS 14 3.2 OCCUPIED BANDWIDTH MEASUREMENT 15 3.2.1 TEST PROCEDURE 15 3.2.2 TEST SETUP LAYOUT 15 3.2.3 TEST DEVIATION 15 3.2.4 TEST RESULTS 15 3.3 CONDUCTED EMISSIONS MEASUREMENT 16 3.3.1 LIMIT 16 3.3.2 TEST PROCEDURES 16 3.3.3 TEST SETUP LAYOUT 16 3.3.4 TEST DEVIATION 16 3.3.5 TEST RESULTS 16 3.4 RADIATED EMISSIONS MEASUREMENT 17 3.4.1 LIMIT 17 3.4.2 TEST PROCEDURES 17 3.4.3 TEST SETUP LAYOUT 18 3.4.4 TEST DEVIATION 19 3.4.5 TEST RESULTS (9KHZ TO 30MHZ) 19 3.4.6 TEST RESULTS (30MHZ TO 1000MHZ) 19 3.4.7 TEST RESULTS (ABOVE 1000MHZ) 19 3.5 BAND EDGE MEASUREMENT 20 Report No.: BTL-FCCP-1-2009H029B Page 4 of 67 Table of Contents Page 3.5.1 LIMIT 20 3.5.2 TEST PROCEDURES 20 3.5.3 TEST SETUP LAYOUT 20 3.5.4 TEST DEVIATION 20 3.5.5 TEST RESULTS 20 3.6 PEAK TO AVERAGE RATIO MEASUREMENT 21 3.6.1 LIMIT 21 3.6.2 TEST PROCEDURES 21 3.6.3 TEST SETUP LAYOUT 21 3.6.4 TEST DEVIATION 21 3.6.5 TEST RESULTS 21 3.7 FREQUENCY STABILITY MEASUREMENT 22 3.7.1 LIMIT 22 3.7.2 TEST PROCEDURES 22 3.7.3 TEST SETUP LAYOUT 22 3.7.4 TEST DEVIATION 22 3.7.5 TEST RESULTS 22 5. LIST OF MEASUREMENT EQUIPMENTS 23 6. EUT TEST PHOTO 25 APPENDIX A - OUTPUT POWER 27 APPENDIX B - OCCUPIED BANDWIDTH 34 APPENDIX C - CONDUCTED EMISSIONS 38 APPENDIX D - RADIATED EMISSION (9KHZ TO 30MHZ) 42 APPENDIX E - RADIATED EMISSION (30MHZ TO 1GHZ) 43 APPENDIX F - RADIATED EMISSION (ABOVE 1GHZ) 50 APPENDIX G - BAND EDGE 57 APPENDIX H - PEAK TO AVERAGE RATIO 61 APPENDIX I - FREQUENCY STABILITY 65 Report No.: BTL-FCCP-1-2009H029B Page 5 of 67 REPORT ISSUED HISTORY Report Version Description Issued Date R00 This report is base on the reference report (Report No.: BTL-FCCP-1-2009H029A/FCC ID: XMR202106EG95AUX ) for worst case spot check (Except the output power) and record. Please refer to the “Differences Brief Description” in section 1.4 and other data in the reference report. May 27, 2021 R01 Revised report to address TCB’s comments. Jun. 01, 2021 Report No.: BTL-FCCP-1-2009H029B Page 6 of 67 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part 22 Subpart H & Part 2 Standard(s) Section Test Item Judgment Remark 2…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-2009H029B Page 1 of 70 FCC Radio Test Report FCC ID: XMR202106EG91AUX This report concerns: Original Grant Project No. : 2009H029B Equipment : LTE Module Brand Name : Quectel Test Model : EG91-AUX Series Model : N/A Applicant : Quectel Wireless Solutions Company Limited Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Date of Receipt : Apr. 16, 2021 Date of Test : Apr. 16, 2021 ~ May 10, 2021 Issued Date : Jun. 01, 2021 Report Version : R01 Test Sample : Engineering Sample No.: SH2021041698 for Radiated; SH2020091134 for Conducted; SH2020091134-2 for adapter. Standard(s) : 47 CFR FCC Part 24 Subpart E 47 CFR FCC Part 2 ANSI/TIA/EIA-603-E-2016 FCC KDB 971168 D01 Power Meas License Digital Systems v03r01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Prepared by : Maker Qi Approved by : Issac Song Report No.: BTL-FCCP-2-2009H029B Page 2 of 70 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and is not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2009H029B Page 3 of 70 Table of Contents Page REPORT ISSUED HISTORY 5 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 1.4 TEST DATA RE-USE SUMMARY 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 DESCRIPTION OF TEST MODES AND TEST CONDITION 11 2.3 BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED 14 3.4 DESCRIPTION OF SUPPORT UNITS 14 3 . TEST RESULT 15 3.1 OUTPUT POWER MEASUREMENT 15 3.1.1 LIMIT 15 3.1.2 TEST PROCEDURE 15 3.1.3 TEST SETUP LAYOUT 15 3.1.4 TEST DEVIATION 15 3.1.5 TEST RESULTS 15 3.2 OCCUPIED BANDWIDTH MEASUREMENT 16 3.2.1 TEST PROCEDURE 16 3.2.2 TEST SETUP LAYOUT 16 3.2.3 TEST DEVIATION 16 3.2.4 TEST RESULTS 16 3.3 CONDUCTED EMISSIONS MEASUREMENT 17 3.3.1 LIMIT 17 3.3.2 TEST PROCEDURES 17 3.3.3 TEST SETUP LAYOUT 17 3.3.4 TEST DEVIATION 17 3.3.5 TEST RESULTS 17 3.4 RADIATED EMISSIONS MEASUREMENT 18 3.4.1 LIMIT 18 3.4.2 TEST PROCEDURES 18 3.4.3 TEST SETUP LAYOUT 19 3.4.4 TEST DEVIATION 20 3.4.5 TEST RESULTS (9KHZ TO 30MHZ) 20 3.4.6 TEST RESULTS (30MHZ TO 1000MHZ) 20 3.4.7 TEST RESULTS (ABOVE 1000MHZ) 20 3.5 BAND EDGE MEASUREMENT 21 Report No.: BTL-FCCP-2-2009H029B Page 4 of 70 Table of Contents Page 3.5.1 LIMIT 21 3.5.2 TEST PROCEDURES 21 3.5.3 TEST SETUP LAYOUT 21 3.5.4 TEST DEVIATION 21 3.5.5 TEST RESULTS 21 3.6 PEAK TO AVERAGE RATIO MEASUREMENT 22 3.6.1 LIMIT 22 3.6.2 TEST PROCEDURES 22 3.6.3 TEST SETUP LAYOUT 22 3.6.4 TEST DEVIATION 22 3.6.5 TEST RESULTS 22 3.7 FREQUENCY STABILITY MEASUREMENT 23 3.7.1 LIMIT 23 3.7.2 TEST PROCEDURES 23 3.7.3 TEST SETUP LAYOUT 23 3.7.4 TEST DEVIATION 23 3.7.5 TEST RESULTS 23 5. LIST OF MEASUREMENT EQUIPMENTS 24 6. EUT TEST PHOTO 27 APPENDIX A - OUTPUT POWER 29 APPENDIX B - OCCUPIED BANDWIDTH 38 APPENDIX C - CONDUCTED EMISSIONS 42 APPENDIX D - RADIATED EMISSION (9KHZ TO 30MHZ) 46 APPENDIX E - RADIATED EMISSION (30MHZ TO 1GHZ) 47 APPENDIX F - RADIATED EMISSION (ABOVE 1GHZ) 54 APPENDIX G - BAND EDGE 61 APPENDIX H - PEAK TO AVERAGE RATIO 65 APPENDIX I - FREQUENCY STABILITY 69 Report No.: BTL-FCCP-2-2009H029B Page 5 of 70 REPORT ISSUED HISTORY Report Version Description Issued Date R00 This report is base on the reference report (Report No.: BTL-FCCP-2-2009H029A/FCC ID: XMR202106EG95AUX ) for worst case spot check (Except the output power) and record. Please refer to the “Differences Brief Description” in section 1.4 and other data in the reference report. May 27, 2021 R01 Revised report to address TCB’s comments. Jun. 01, 2021 Report No.: BTL-FCCP-2-2009H029B Page 6 of 70 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part 24 Subpart E& Part 2 Standard(s) Section Test Item Judgment Remark 2.1046…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-3-2009H029B Page 1 of 80 FCC Radio Test Report FCC ID: XMR202106EG91AUX This report concerns: Original Grant Project No. : 2009H029B Equipment : LTE Module Brand Name : Quectel Test Model : EG91-AUX Series Model : N/A Applicant : Quectel Wireless Solutions Company Limited Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233. Date of Receipt : Apr. 16, 2021 Date of Test : Apr. 16, 2021 ~ May 10, 2021 Issued Date : May 27, 2021 Report Version : R00 Test Sample : Engineering Sample No.: SH2021041698 for Radiated; SH2020091134 for Conducted; SH2020091134-2 for adapter. Standard(s) : 47 CFR FCC Part 27 Subpart L 47 CFR FCC Part 27 Subpart M 47 CFR FCC Part 2 ANSI/TIA/EIA-603-E-2016 FCC KDB 971168 D01 Power Meas License Digital Systems v03r01 The above equipment has been tested and found compliance with the requirement …

Text truncated - open the document above for the full version.