XMR2022SC262RWFSmart Module

SC200R&SC262R Series Hardware Design Smart Module Series Version: 1.2 Date: 2022-05-23 Status: Released Smart Module Series SC200R&SC262R_Series_Hardware_Design 1 / 124 Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local office. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm Or email to [email protected]. General Notes Quectel offers the information as a service to its customers. The information provided is based upon customers’ requirements. Quectel makes every effort to ensure the quality of the information it makes available. Quectel does not make any warranty as to the information contained herein, and does not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information. All information supplied herein is subject to change without prior notice. Disclaimer While Quectel has made efforts to ensure that the functions and features under development are free from errors, it is possible that these functions and features could contain errors, inaccuracies and omissions. Unless otherwise provided by valid agreement, Quectel makes no warranties of any kind, implied or express, with respect to the use of features and functions under development. To the maximum extent permitted by law, Quectel excludes all liability for any loss or damage suffered in connection with the use of the functions and features under development, regardless of whether such loss or damage may have been foreseeable. Copyright The information contained here is proprietary technical information of Quectel. Transmitting, reproducing, disseminating and editing this document as well as using the content without permission are forbidden. Offenders will be held liable for payment of damages. All rights are reserved in the event of a patent grant or registration of a utility model or design. Copyright © Quectel Wireless Solutions Co., Ltd. 2021. All rights reserved. Smart Module Series SC200R&SC262R_Series_Hardware_Design 2 / 124 Safety Information The following safety precautions must be observed during all phases of operation, such as usage, service or repair of any cellular terminal or mobile incorporating the module. Manufacturers of the cellular terminal should send the following safety information to users and operating personnel, and incorporate these guidelines into all manuals supplied with the product. If not so, Quectel assumes no liability for customers’ failure to comply with these precautions. Full attention must be paid to driving at all times in order to reduce the risk of an accident. Using a mobile while driving (even with a handsfree kit) causes distraction and can lead to an accident. Please comply with laws and regulations restricting the use of wireless devices while driving. Switch off the cellular terminal or mobile before boarding an aircraft. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communication systems. If there is an Airplane Mode, it should be enabled prior to boarding an aircraft. Please consult the airline staff for more restrictions on the use of wireless devices on an aircraft. Wireless devices may cause interference on sensitive medical equipment, so please be aware of the restrictions on the use of wireless devices when in hospitals, clinics or other healthcare facilities. Cellular terminals or mobiles operating over radio signal and cellular network cannot be guaranteed to connect in certain conditions, such as when the mobile bill is unpaid or the (U)SIM card is invalid. When emergent help is needed in such conditions, use emergency call if the device supports it. In order to make or receive a call, the cellular terminal or mobile must be switched on in a service area with adequate cellular signal strength. In an emergency, the device with emergency call function cannot be used as the only contact method considering network connection cannot be guaranteed under all circumstances. The cellular terminal or mobile contains a transmitter and receiver. When it is ON, it receives and transmits radio frequency signals. RF interference can occur if it is used close to TV set, radio, computer or other electric equipment. In locations with potentially explosive atmospheres, obey all posted signs to turn off wireless devices such as your phone or other cellular terminals. Areas with potentially explosive atmospheres include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles such as grain, dust or metal powders, etc. Smart Module Series SC200R&SC262R_Series_Hardware_Design 3 / 124 About the Document Revision History Version Date Author Description 1.0 2019-12-30 Arsene TONG Initial 1.1 2020-09-09 Jasper LAI/ Jamie SHI 1. Updated SC200R-EM frequency bands (Chapter 2.1/6.1): Added B4 in LTE-FDD Deleted B39 in LTE-TDD Added B4 in WCDMA 2. Added Galileo in supported GNSS (Chapter 2.1/2.2/5/6.3). 3. Added a note for the wakeup of LDO6_1V8 during sleep mode (Chapter 3.3). 4. Updated Wi-Fi output power and added Wi-Fi receiving sensitivity (Chapter 4.1.1). 5. Added BT transmitting and receiving performance (Chapter 4.2.1). 6. Added GNSS performance data (Chapter 5.1). 7. Added current consumption of SC200R-CE/-NA (Chapter 7.4). 8. Added RF output power of SC200R-NA (Chapter 7.5). 9. Added RF receiving sensitivity of SC200R-CE/-NA (Chapter 7.6). 10. Updated the maintenance clearance between the module and other components to at least 5 mm (Chapter 8.2). 11. Updated general descripti…

Text truncated - open the document above for the full version.

Quectel Wireless Solutions Company Limited Date: 2022-06-30 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XMR2022SC262RWF Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ----------------------------------- Grantee Contact’s Signature Quectel Wireless Solutions Company Limited Jean Hu

Quectel Wireless Solutions Company Limited Declaration of Authorization We Name: Quectel Wireless Solutions Company Limited Address: Building 5, Shanghai Business Park PhaseIII, (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Declare that: Name Representative of agent: Ms. Riley Wei Agent Company name: BTL Inc. Address: No. 29, Jintang Road, Tangzhen Industry Park Pudong New Area City: Shanghai Country: China is authorized to apply for Certification of the following product(s) and signing all the related documents including 731 forms: Product description: Smart Module Type designation: SC262R-WF Trademark: Quectel FCC ID: XMR2022SC262RWF on our behalf. Date: 2022-06-30 City: Shanghai Name: Jean Hu Function: Certification Section Signature:

Quectel Wireless Solutions Company Limited FCC Modular Approval Statement 1 Receiver Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Subject: Modular Approval Statement Date: 2022-07-01 FCC Certification Number: XMR2022SC262RWF Model Name/Number: Smart Module / SC262R-WF TO WHOM IT MAY CONCERN Pursuant to Paragraphs CFR § 15.212, we herewith declare for our module. Modular approval requirement Yes No * (a) The radio elements must have the radio frequency circuitry be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. Yes *Please provide a detailed explanation if the answer is “No.”: (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable standard under conditions of excessive data rates or over- modulation. Yes *Please provide a detailed explanation if the answer is “No.”: (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Yes *Please provide a detailed explanation if the answer is “No.”: (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. Yes *Please provide a detailed explanation if the answer is “No.”: (e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing. Yes *Please provide a detailed explanation if the answer is “No.”: (f) The module shall comply with the Category I equipment labeling requirements and CFR § 15.212(a)(1)(vi). Yes *Please provide a detailed explanation if the answer is “No.”: Quectel Wireless Solutions Company Limited FCC Modular Approval Statement 2 (g) The module shall comply with applicable RSS-102 exposure requirements and any applicable FCC RF exposure requirement which are based on the intended use/configurations. Yes *Please provide a detailed explanation if the answer is “No.”: (i) The modular transmitter complies with all applicable FCC rules. Instructions for maintaining compliance are given in the user instructions. Yes If you have any questions, please feel free to contact us at the address shown below Best Regards, ____________________ (Signed) Name / Title: Jean Hu/ Certification Section

Project No.:2204H021 Page 1 of 3 ATTACHMENT PHOTOGRAPHS OF EUT Project No.:2204H021 Page 2 of 3

Label Label location

Project No.:2204H021 Page 3 of 3

Report No.: BTL-FCCP-6-2204H021 Page 1 of 4 FCC RF EXPOSURE REPORT FCC ID: XMR2022SC262RWF Project No. : 2204H021 Equipment : Smart Module Brand Name : Quectel Test Model : SC262R-WF Series Model : N/A Applicant : Quectel Wireless Solutions Co., Ltd Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer : Quectel Wireless Solutions Co., Ltd Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Date of Receipt : May 20, 2022 Date of Test : May 24, 2022~Jun. 08, 2022 Issued Date : Jun. 29, 2022 Report Version : R00 Test Sample : Engineering Sample No.: SH2022052370 for radiated, SH2022052371 for conduted. Standard(s) : FCC Title 47 Part 2.1091 KDB 447498 D01 General RF exposure guidance v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Maker Qi Approved by : Ryan Wang Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-6-2204H021 Page 2 of 4 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-6-2204H021 R00 Original Report Jun. 29, 2022 Valid Report No.: BTL-FCCP-6-2204H021 Page 3 of 4 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4G: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 SAA31578A Dipole SMA-J 0.47 Note: The antenna gain is provided by the manufacturer. For 5G : Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 SAA31578A Dipole SMA-J 1.28 Note: The antenna gain is provided by the manufacturer. For BT and BLE: Ant. Brand P/N Antenna Type Connector Gain (dBi) 1 SAA31578A Dipole SMA-J 0.47 Note: The antenna gain is provided by the manufacturer. Report No.: BTL-FCCP-6-2204H021 Page 4 of 4 2. TEST RESULTS For BLE: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 0.47 1.1143 0.50 1.1220 0.000249 1 Complies For BT: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 0.47 1.1143 9.50 8.9125 0.001976 1 Complies For 2.4GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 0.47 1.1143 23.50 223.8721 0.049629 1 Complies For 5GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 1.28 1.3428 13.00 19.9526 0.005330 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance. End of Test Report

Report No.:BTL-FCCP-4-2204H021 Page 1 of 70 FCC Radio Test Report FCC ID: XMR2022SC262RWF This report concerns: Original Grant Project No. : 2204H021 Equipment : Smart Module Brand Name : Quectel Test Model : SC262R-WF Series Model : N/A Applicant : Quectel Wireless Solutions Co., Ltd Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer : Quectel Wireless Solutions Co., Ltd Address : Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Date of Receipt : May 20, 2022 Date of Test : May 24, 2022~Jun. 08, 2022 Issued Date : Jun. 29, 2022 Report Version : R00 Test Sample : Engineering Sample No.: SH2022052370 for radiated, SH2022052371 for conduted. Standard(s) : FCC CFR Title 47, Part 15, Subpart C FCC KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10-2013 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Maker Qi Approved by : Ryan Wang Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.:BTL-FCCP-4-2204H021 Page 2 of 70 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.:BTL-FCCP-4-2204H021 Page 3 of 70 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 9 2 . GENERAL INFORMATION 10 2.1 GENERAL DESCRIPTION OF EUT 10 2.2 DESCRIPTION OF TEST MODES 12 2.3 PARAMETERS OF TEST SOFTWARE 13 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 2.5 SUPPORT UNITS 14 3 . AC POWER LINE CONDUCTED EMISSIONS 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 EUT OPERATING CONDITIONS 16 3.6 TEST RESULTS 16 4 . RADIATED EMISSIONS 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 19 4.4 TEST SETUP 19 4.5 EUT OPERATING CONDITIONS 20 4.6 TEST RESULTS - 9 KHZ TO 30 MHZ 20 4.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 20 4.8 TEST RESULTS - ABOVE 1000 MHZ 20 5 . NUMBER OF HOPPING FREQUENCY 21 5.1 LIMIT 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM STANDARD 21 5.4 TEST SETUP 21 5.5 EUT OPERATION CONDITIONS 21 Report No.:BTL-FCCP-4-2204H021 Page 4 of 70 Table of Contents Page 5.6 TEST RESULTS 21 6 . AVERAGE TIME OF OCCUPANCY 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . HOPPING CHANNEL SEPARATION 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . BANDWIDTH 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 . MAXIMUM OUTPUT POWER 25 9.1 LIMIT 25 9.2 TEST PROCEDURE 25 9.3 DEVIATION FROM STANDARD 25 9.4 TEST SETUP 25 9.5 EUT OPERATION CONDITIONS 25 9.6 TEST RESULTS 25 10 . CONDUCTED SPURIOUS EMISSION 26 10.1 LIMIT 26 10.2 TEST PROCEDURE 26 10.3 DEVIATION FROM STANDARD 26 10.4 TEST SETUP 26 Report No.:BTL-FCCP-4-2204H021 Page 5 of 70 Table of Contents Page 10.5 EUT OPERATION CONDITIONS 26 10.6 TEST RESULTS 26 11 . MEASUREMENT INSTRUMENTS LIST 27 12 . EUT TEST PHOTO 29 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 33 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 36 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 37 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 40 APPENDIX E - NUMBER OF HOPPING FREQUENCY 51 APPENDIX F - AVERAGE TIME OF OCCUPANCY 53 APPENDIX G - HOPPING CHANNEL SEPARATION 56 APPENDIX H - BANDWIDTH 58 APPENDIX I - MAXIMUM OUTPUT POWER 60 APPENDIX J - CONDUCTED SPURIOUS EMISSION 63 APPENDIX K - DECLARATION FOR BLUETOOTH DEVICE 68 Report No.:BTL-FCCP-4-2204H021 Page 6 of 70 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-4-2204H021 R00 Original Report Jun. 29, 2022 Valid Report No.:BTL-FCCP-4-2204H021 Page 7 of 70 1. SUMMARY OF TEST RESULT…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2204H021 Page 30 of 96 10. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2204H021 Page 31 of 96 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-1-2204H021 Page 32 of 96 Radiated Emissions Test Photos Above 1 GHz Report No.: BTL-FCCP-1-2204H021 Page 33 of 96 Close-up Test Photos