XMR2022SG865WWFSmart Module with WiFi and BT

SG865W Series Hardware Design Smart Module Series Version: 1.0 Date: 2022-05-20 Status: Released Smart Module Series SG865W_Series_Hardware_Design 1 / 123 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions License Agreements Documents and information provided by us shall be kept confidential, unless specific permission is granted. They shall not be accessed or used for any purpose except as expressly provided herein. Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. Smart Module Series SG865W_Series_Hardware_Design 2 / 123 Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Third-Party Rights This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2022. All rights reserved. Smart Module Series SG865W_Series_Hardware_Design 3 / 123 Safety Information The following safety precautions must be observed during all phases of operation, such as usage, service or repair of any cellular terminal or mobile incorporating the module. Manufacturers of the cellular terminal should notify users and operating personnel of the following safety information by incorporating these guidelines into all manuals of the product. Otherwise, Quectel assumes no liability for customers’ fa…

Text truncated - open the document above for the full version.

Rev 11/21/30 Quectel Wireless Solutions Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: (XMR2022SG865WWF). Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for a period of 180days: Exhibit Type User Manual External Photos Internal Photos Test Setup Photos Sincerely, Signature: Printed name: Jean Hu

RF_160, Issue 04 Quectel Wireless Solutions Co., Ltd. Declaration of Authorization We Name: Quectel Wireless Solutions Co., Ltd. Address: Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District City: Shanghai Country: China Declare that: Name Representative of agent: Well Wei Agent Company name: SGS-CSTC Standards Technical Services Co., Ltd. Suzhou Branch Address: South of No. 6 Plant, No. 1, Runsheng Road ,Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City: Suzhou Country: China is authorized to apply for Certification of the following product(s): Product description: Smart Module Type designation: SG865W-WF Trademark: Quectel on our behalf. Date:  2022/06/09  City: Shanghai  Name:  Jean hu (2) Function: ............Manager................... Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Modular Approval Request FCC ID: XMR2022SG865WWF IC: 10224A-2022SG865W Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. Y The EUT provides the RF shielding. See EUT photo. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Y The EUT has its buffered modulation. 3. The modular transmitter must have its own power supply regulation. Y The EUT has its own power supply regulation, please see the Schematic Diagram. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable).. Y The EUT meets the FCC/ISED antenna requirements; unique antenna connector and photo of antenna are shown in the test report. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Y The EUT was tested with a test board, Please see test report and setup photo 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Y The FCC ID is XMR2022SG865WWF The IC ID is 10224A-2022SG865W 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Y The EUT is compliant with all applicable FCC/ISED rules. Details instructions for maintaining compliance are give in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, Y The EUT complies with RF exposure FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. requirement. Note: If compliance with one or more of the numbered requirements, listed above, cannot be demonstrated, it may be possible to obtain a “Limited Modular Approval” (LMA). Name and surname of applicant (or authorized representative): Jean Hu Date: 2022-06-14 Signature:

Page 1 of 2 1 Photographs - EUT Constructional Details Test Antenna LTE Module : SG865W-WF Page 2 of 2

Page 1 of 2 1 Photographs - EUT Constructional Details Model No.(EUT): SG865W-WF Page 2 of 2

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG06 Rev.: 01 Page: 1 of 8 Authorized Signature: Panta Sun Wireless Laboratory Manager TEST REPORT Application No.: SEWM2203000023RG Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China EUT Description: Smart Module Model No.: SG865W-WF Trade Mark: quectel FCC ID: XMR2022SG865WWF Standards: 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 Date of Receipt: 2022/3/20 Date of Issue: 2022/5/26 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG06 Rev.: 01 Page: 2 of 8 1 Version Revision Record Version Chapter Date Modifier Remark 01 2022/5/26 Original Prepared By (Weller Liu) / Test Supervisor Checked By (Well Wei) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG06 Rev.: 01 Page: 3 of 8 Contents 1 Version ......................................................................................................................... 2 2 General Information ...................................................................................................... 4 2.1 Client Information .................................................................................................. 4 2.2 Test Facility ........................................................................................................... 4 2.3 General Description of EUT ................................................................................... 5 3 RF Exposure Evaluation ............................................................................................... 6 3.1 RF Exposure Compliance Requirement ................................................................ 6 3.1.1 Limits ................................................................................................................. 6 3.1.2 Test Procedure .................................................................................................. 7 3.1.3 EUT RF Exposure Evaluation ............................................................................ 7 3.1.4 Exposure calculations for multiple sources ........................................................ 8 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG06 Rev.: 01 Page: 4 of 8 2 General Information 2.1 Client Information Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China 2.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6336.01) SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6336.01. • Innovation, Science and Economic Development Canada SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0120. IC#: 27594. • FCC –Designation Number: CN1312 SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized as an accredited testing laboratory. Designation Number: CN1312. Test Firm Registration Number: 717327 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG06 Rev.: 01 Page: 5 of 8 2.3 General Description of EUT EUT Description: Smart Module Model No.: SG865W-WF Trade Mark: quectel Hardware Version: R1.0 Software Version: SG865WWFPAR01A05 Antenna Type: External, Integrated Antenna Gain*: Provided by client BT/BLE 0dBi 2.4GWIFI: 0dBi (Ant1) 0dBi (Ant2) 5GWIFI: 0dBi (Ant1) 0dBi (Ant2) Note: *Since the above data and/or information is provided by the client relevant results or conclusions of this report are only made for these data and/or information , SGS is not responsible for the authenticity, integrity and results of the data and information and/or the validity of the conclusion. Remark: As above information is provided and confirmed by the applicant. SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG06 Rev.: 01 Page: 6 of 8 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2 ) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the r…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG01 Rev.: 01 Page: 1 of 95 Authorized Signature: Panta Sun Wireless Laboratory Manager TEST REPORT Application No.: SEWM2203000023RG Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China EUT Description: Smart Module Model No.: SG865W-WF Trade Mark: quectel FCC ID: XMR2022SG865WWF Standards: FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C Date of Receipt: 2022/3/20 Date of Test: 2022/3/27 to 2022/5/25 Date of Issue: 2022/5/26 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG01 Rev.: 01 Page: 2 of 95 1 Version Revision Record Version Chapter Date Modifier Remark 01 2022/5/26 Original Prepared By (Weller Liu) / Test Supervisor Checked By (Well Wei) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG01 Rev.: 01 Page: 3 of 95 2 Test Summary Test Item FCC Rule No. Test Method Test Result Result Antenna Requirement 15.203/15.247(b) -- Clause 4.1 PASS AC Power Line Conducted Emission 15.207 ANSI C63.10 (2013) Section 6.2 Clause 4.3 PASS Conducted Peak Output Power 15.247 (b)(1) ANSI C63.10 (2013) Section 11.9.2.3 Clause 4.4 PASS 20dB Emission Bandwidth & 99% Occupied Bandwidth 15.247 (a)(1) ANSI C63.10 (2013) Section 6.9.2/6.9.3 Clause 4.5 Reporting only Carrier Frequencies Separation 15.247 (a)(1) ANSI C63.10 (2013) Section 7.8.2 Clause 4.6 PASS Hopping Channel Number 15.247 (a)(1) ANSI C63.10 (2013) Section 7.8.3 Clause 4.7 PASS Dwell Time 15.247 (a)(1) ANSI C63.10 (2013) Section 7.8.4 Clause 4.8 PASS Band-edge for RF Conducted Emissions 15.247(d) ANSI C63.10 (2013) Section 7.8.7.2 Clause 4.9 PASS RF Conducted Spurious Emissions 15.247(d) ANSI C63.10 (2013) Section 7.8.7.1 Clause 4.10 PASS Radiated Spurious emissions 15.247(d); 15.205/15.209 ANSI C63.10 (2013) Section 6.4 / 6.5 / 6.6 Clause 4.11 PASS Restricted bands around fundamental frequency (Radiated Emission) 15.247(d); 15.205/15.209 ANSI C63.10 (2013) Section 7.8.8.3 Clause 4.12 PASS ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG01 Rev.: 01 Page: 4 of 95 Contents 1 Version .......................................................................................................................... 2 2 Test Summary ............................................................................................................... 3 3 General Information ....................................................................................................... 5 3.1 Details of Client ................................................................................................. 5 3.2 Test Location .................................................................................................... 5 3.3 Test Facility ....................................................................................................... 5 3.4 General Description of EUT .............................................................................. 6 3.5 Test Environment .............................................................................................. 8 3.6 Description of Support Units ............................................................................. 8 4 Test results and Measurement Data .............................................................................. 9 4.1 Antenna Requirement ....................................................................................... 9 4.2 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence ................................................................................................................... 10 4.2.1 Test Requirement: .................................................................................... 10 4.2.2 Conclusion ................................................................................................ 10 4.3 AC Power Line Conducted Emissions............................................................. 12 4.4 Conducted Output Power ................................................................................ 16 4.5 20dB Emission Bandwidth .............................................................................. 17 4.6 Carrier Frequencies Separationy .................................................................... 18 4.7 Hopping Channel Number ............................................................................... 19 4.8 Dwell Time ...................................................................................................... 20 4.9 Band-edge for RF Conducted Emissions ........................................................ 21 4.10 Spurious RF Conducted Emissions................................................................. 22 4.11 Radiated Spurious Emissions ......................................................................... 23 4.12 Restricted bands around fundamental frequency ............................................ 26 5 Measurement Uncertainty (95% confidence levels, k=2) ............................................. 28 6 Equipment List ............................................................................................................. 29 7 Photographs - EUT Constructional Details .................................................................. 31 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2203000023RG01 Rev.: 01 Page: 5 of 95 3 General Information 3.1 Details of Client Applicant: Quectel Wireless …

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 1 of 6 Appendix A Setup Photos for SEWM2203000023RG01 SEWM2203000023RG02 SEWM2203000023RG03 SEWM2203000023RG04 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 2 of 6 1.1 AC Power Line Conducted Emissions ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 3 of 6 1.2 Unwanted Emissions that fall Outside of the Restricted Bands (Radiated) and Unwanted Emissions in the Restricted Bands (Radiated) below 1GHz 9k-30MHz: ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 4 of 6 30M-1GHz: ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 5 of 6 1.3 Unwanted Emissions that fall Outside of the Restricted Bands (Radiated) and Unwanted Emissions in the Restricted Bands (Radiated) above 1GHz 1G-18GHz: ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Rev.: 01 Page: 6 of 6 Above 18GHz: The End