XMR2023EM061KGLLTE-A Module

EM061K-GL Hardware Design LTE-A Module Series Version: 1.0.0 Date: 2023-02-24 Status: Preliminary LTE-A Module Series EM061K-GL_Hardware_Design 1 / 75 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions License Agreements Documents and information provided by us shall be kept confidential, unless specific permission is granted. They shall not be accessed or used for any purpose except as expressly provided herein. Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non- exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. LTE-A Module Series EM061K-GL_Hardware_Design 2 / 75 Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Third-Party Rights This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third- party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2023. All rights reserved. LTE-A Module Series EM061K-GL_Hardware_Design 3 / 75 Safety Information The following safety precautions must be observed during all phases of operation, such as usage, service or repair of any cellular terminal or mobile incorporating the module. Manufacturers of the cellular terminal should notify users and operating personnel of the following safety information by incorporating these guidelines into all manuals of the product. Otherwise, Quectel assumes no liability for customers’ failure to com…

Text truncated - open the document above for the full version.

Federal Communications Commission 7435 Oakland MiUs Road Colum创aMD 21046 在lUECTE4ι Subject: Certifi田t10ndøsignating a U.8. agent for servJce of pro佣目pursuantto Part 2.911(d)(7) Towhom忧may∞ncem， Quectel Wireless Solutlons Company limited, Grantee Code: XMR ("the appllcant可回而霄esthat, as of the date 01 the filing of app四tion，lk。国kUSA，I时IFRN: 003335033唱('theagent可isdesignated as the U.S. agent fOf the pu巾。seofa∞epting service of process on behalf of the appli四川 The phys也alU.5 . address and email 10r the designaled agent are Physical U .8. addr&幽9920Pac而cHeights Blvd., Ste. 150, #7025, San四吨。，CA92121 Email: ∞mpliance@ikotek..∞m The appticant ac回回sto maintain an agent fOf service of process in the United States for no les$ than one year after either the grantee has permane川Iyterminaled all ma毗etìngand阳p。由tion01 the appl四bleequipment 恻thinthe U.S., or the conclusion 01 any Commission.related administrative or judicial proceeding involving the eqUlpmen忧，whichever Is later. The agent ac国ptsthe designation by (the applicant) as the U.S. agent to accept service 01 pr田essincludes, oot Is not limited to, d创i晴ryof any∞rresponden出，notices, orders, decisions, and陪quirements01 administrative , legal, or judicial process related to Commission pro晤时Ings Signed by the Applicant Email: [email protected] Date: 16 Februa叩2023 Signed by the Agent (i1 d汗1erentfrom the Applicant) rF二7"""'::可-、 、、J一-' ~町百二酬M.Peterson Trtle: President and CE。 Email; joe.pete陌[email protected] Date: Feb阳ary17 th , 2023

Rev 1/26/2023 Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-25-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: XMR2023EM061KGL [Quectel Wireless Solutions Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Jean Hu Rev 1/26/2023 Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-25-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: XMR2023EM061KGL [Quectel Wireless Solutions Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Jean Hu

Quectel Wireless Solutions Co., Ltd Statement We Quectel Wireless Solutions Co., Ltd declare the following models. Product: LTE Module Model Number: EM061K-GL Hardware Version: R1.0 These are all LTE modules. They use the same baseband chipset and different RF hardware design. ➢ Software difference on frequencies configuration as below. Module Category Supported Band Supported CA (EM060K-GL)-Original FCC ID: XMR2022EM060KGL IC: 10224A-22EM060KGL DL Cat6 WCDMA: B1/B2/B3/B4/B5/B6/B8/B19 LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B1 7/B18/B19/B20/B25/B26/B28/B29/B30/ B32/B66/B71 LTE-TDD: B34/B38/B39/B40/B41/B42/B43 /B48 GNSS:L1 Please refer to “Quectel_Module A_Series_CA_Feat ures” (EM061K-GL)-NEW FCC ID: XMR2023EM061KGL IC: 10224A-23EM061KGL DL Cat6 WCDMA: B1/B2/B3/B4/B5/B6/B8/B19 LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B1 7/B18/B19/B20/B25/B26/B28/B29/B30/ B32/B66/B71 LTE-TDD: B34/B38/B39/B40/B41 GNSS:L1 Please refer to “Quectel_Module A_Series_CA_Feat ures” Quectel Wireless Solutions Co., Ltd ➢ Hardware difference 1. compartments usage: EM060K-GL Quantity EM061K-GL Quantity (Part Description) (Part Description) QLN-4642-0-LGA15F-TR-04-0 1 QLN-4642-0-LGA15F-TR-04-0 0 B42/43/48 RX (LNA for B42/43/48) (LNA for B42/43/48) QLN-4650-0-LGA15F-SR-05-0 1 QLN-4650-0-LGA15F-SR-05-0 0 B46 RX (LNA for B46) (LNA for B46) DEA165538BT-2263A1-H 2 DEA165538BT-2263A1-H 0 B46 RX (SAW for B46) (SAW for B46) QM52042TR13-5K 1 QM52042TR13-5K 0 B42/43/48 TX (PA for B42/43/48) (PA for B42/43/48) RTC8604 1 CAN6107C 1 GNSS (LNA for GPS) (LNA for GPS) SAFFB722MAA0F0AR1X 1 NDFH064-0722SA 1 B29 RX (SAW for B29 RX) (SAW for B29 RX) SAFFB1G47AA0F0AR1X 2 MS11U1G47-RX32C 2 B32 RX (SAW for B32 RX) (SAW for B32 RX) PCB: EM060K-GL EM061K-GL Quectel Wireless Solutions Co., Ltd 2.DUP and SAW Designator EM060K-GL EM061K-GL U1306 B39781B1250P810 IC RF DPX LTE UNBalance B28AB 1.8x1.4mm H0.475mm RO SAYRH725MBC0B0AR00 IC RF DPX LTE UNBalance B28AB 1.8x1.4mm H0.6mm RO U1702 B39162B8666L210 IC RF SAW Extraor GPS_GLONASS_BEIDOU L1/Cellular Unbalance 1.7x1.3mm H0.5mm RO B39162B8905L210 IC RF SAW Extraor GPS_GLONASS_BEIDOU L1/Cellular Unbalance PINS10 1.7x1.3mm H0.7mm RO U1808 SATEY1G96AV2F0AR00 IC RF RX filter UNBalance B25/B66/B30 10dBm 1.8x1.4mm H0.6mm RO B39242B9954P810 IC RF RX filter UNBalance B25/B66/B30 10dBm PINS8 1.8x1.4mm H0.475mm RO Add the second source for U1702 and U1808 on EM061K-GL Change the supplier of U1306. 3. Shielding shell There is a change in the structure of the shielding frame, please refer to the corresponding EUT photos for details. Quectel Wireless Solutions Co., Ltd Their difference shows on above, except Listings above, the others are the same as previous version. The change will not impact RF performance for the others frequency bands. Based on the above changes, Power, RSE and EMC of EM061K-GL (FCC ID: XMR2023EM061KGL, IC: 10224A-23EM061KGL) were fully tested in this report, and other items data please refer to the EM061K-GL (FCC ID: XMR2022EM060KGL, IC: 10224A-22EM060KGL) Name/Surname: Position/Title: Certification Manager Address/Location: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Issue Date: 2023/6/25

RF_160, Issue 04 Quectel Wireless Solutions Co., Ltd. Declaration of Authorization We Name: Quectel Wireless Solutions Co., Ltd. Address: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China City: Shanghai Country: China Declare that: Name Representative of agent: Well Wei Agent Company name: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Address: South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: LTE-A Module Type designation: EM061K-GL Trademark: QUECTEL on our behalf. Date: 2023/06/25 Name:  Jean Hu . (2) Email: [email protected]....... Signature:  Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FEDERAL COMMUNICATIONS COMMISSION Supplier’s Declaration of Conformity (SDoC) Equipment: LTE-A Module Trademark(s) and Model(s): QUECTEL / EM061K-GL Manufacturer: Quectel Wireless Solutions Co., Ltd. FCC ID in case other parts of this equipment are subject to certification: XMR2023EM061KGL This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration: Test report number: SEWM2304000133RG03 Issue date: 2023-06-21 The following manufacturer/importer/entity (located in the USA) is responsible for this declaration: Date: 2023/06/25 Name:  Jean Hu  Email: [email protected]...... Signature:  . FCC

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: XMR2023EM061KGL Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, please see exhibition external photos 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, the modular has buffer modulation /data inputs 3. The modular transmitter must have its own power supply regulation. Yes, please see the SCH.pdf 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, the requirements of antenna connector and spurious emission have been fulfilled. Please refer to the test report exhibition. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, please refer to the setup photo exhibition for the stand-alone configuration 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, the module will be label with its own FCC ID, and the instruction on the labelling rule of the end product has been stated in the user manual of this module. Please refer to the label and user manual exhibition. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, the required FCC rule has been fulfilled and all the instruction for maintaining compliance have been clearly stated in the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, please refer exhibition RF exposure for the compliance of MPE RF exposure rule. Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. RF_734_02 04 April 16 Name and surname of applicant (or authorized representative): Signature: Date: 2023/06/25 Name:  Jean Hu  Email: [email protected]...... Signature: .

Rev 11/20/07 Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XMR2023EM061KGL Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (1. Block Diagram.pdf; 2.SCH.pdf; 3. Operational description.pdf; 4.BOM.pdf; 5. Tune up) (Block Diagram, SCH, Operational description, BOM, Tune Up Procedure) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Exhibit Type File Name (External Photos, Internal Photos, Setup Photos, Manual) (Appendix A.3-External Photos.pdf; Appendix A.4-Internal Photos.pdf; Appendix A.2 – PCB Setup Photos; Manual;) Sincerely, Name: Jean Hu Title: Certification Manager

Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: XMR2023EM061KGL Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, please see exhibition external photos 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, the modular has buffer modulation /data inputs 3. The modular transmitter must have its own power supply regulation. Yes, please see the SCH.pdf 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, the requirements of antenna connector and spurious emission have been fulfilled. Please refer to the test report exhibition. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, please refer to the setup photo exhibition for the stand-alone configuration 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, the module will be label with its own FCC ID, and the instruction on the labelling rule of the end product has been stated in the user manual of this module. Please refer to the label and user manual exhibition. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, the required FCC rule has been fulfilled and all the instruction for maintaining compliance have been clearly stated in the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, please refer exhibition RF exposure for the compliance of MPE RF exposure rule. Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Name and surname of applicant (or authorized representative): Signature: Date: 2023/06/25 Name:  Jean Hu  Email: [email protected]...... Signature:  .

Page 1 of 3 1 Photographs - EUT Constructional Details Test auxiliary PCB board and surrounding photos LTE B30 WCDMA B2/4/5 LTE B2/4/5/7/12/13/14/17/25/26/66/71/38/41 Page 2 of 3 Page 3 of 3 Model No.: EM061K-GL FCC ID: XMR2023EM061KGL IC: 10224A-23EM061KGL

Label: Label location:

1 Photographs - EUT Constructional Details Model No.: EM061K-GL FCC ID: XMR2023EM061KGL IC: 10224A-23EM061KGL

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2304000133RG01 Rev.: 01 Page: 1 of 50 Authorized Signature: Well Wei Wireless Laboratory Manager TEST REPORT Application No.: SEWM2304000133RG Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China EUT Description: LTE-A Module Model No.: EM061K-GL Trade Mark: QUECTEL FCC ID: XMR2023EM061KGL Standards: 47 CFR Part 2 47 CFR Part 22 47 CFR Part 24 47 CFR Part 27 47 CFR Part 90 Date of Receipt: 2023/04/25 Date of Test: 2023/05/13 to 2023/06/21 Date of Issue: 2023/06/21 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2304000133RG01 Rev.: 01 Page: 2 of 50 1 Version Revision Record Version Chapter Date Modifier Remark 01 2023/06/21 Original Prepared By (Levi Li) / Test Engineer Checked By (Stone Gu) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2304000133RG01 Rev.: 01 Page: 3 of 50 Contents 1 Version .......................................................................................................................... 2 2 Test Summary ............................................................................................................... 5 2.1 UMTS Band 5 ................................................................................................... 5 2.2 UMTS Band 2 ................................................................................................... 6 2.3 UMTS Band 4 ................................................................................................... 7 2.4 LTE Band 5/26(824~849 MHz) ......................................................................... 8 2.5 LTE Band 2 /25 ................................................................................................. 9 2.6 LTE Band 4 /66 ............................................................................................... 10 2.7 LTE Band 7/38/41 ........................................................................................... 11 2.8 LTE Band 12/17 .............................................................................................. 13 2.9 LTE Band 13 ................................................................................................... 14 2.10 LTE Band 14 ................................................................................................... 15 2.11 LTE Band 26(814~824 MHz) .......................................................................... 17 2.12 LTE Band 30 ................................................................................................... 18 2.13 LTE Band 71 ................................................................................................... 20 3 General Information ..................................................................................................... 21 3.1 Details of Client ............................................................................................... 21 3.2 Test Location .................................................................................................. 21 3.3 Test Facility ..................................................................................................... 21 3.4 General Description of EUT ............................................................................ 22 3.5 Test Mode ....................................................................................................... 23 3.6 Test Environment ............................................................................................ 23 3.7 Description of Support Units ........................................................................... 23 3.8 Technical Specification ................................................................................... 24 3.9 Test Frequencies ............................................................................................ 26 4 Description of Tests ..................................................................................................... 36 4.1 Conducted Output Power ................................................................................ 36 4.2 Effective (Isotropic) Radiated Power of Transmitter ........................................ 37 4.3 Occupied Bandwidth ....................................................................................... 38 4.4 Band Edge at Antenna Terminals ................................................................... 39 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2304000133RG01 Rev.: 01 Page: 4 of 50 4.5 Spurious And Harmonic Emissions at Antenna Terminal ................................ 40 4.6 Peak-Average Ratio ........................................................................................ 41 4.7 Field Strength of Spurious Radiation............................................................... 42 4.8 Frequency Stability / Temperature Variation ................................................... 43 4.9 Test Setups ..................................................................................................... 44 4.9.1 Test Setup 1 ............................................................................................. 44 4.9.2 Test Setup 2 ............................................................................................. 44 4.9.3 Test Setup 3 ............................................................................................. 45 4.10 Test Conditions .............................................................…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SE…

Text truncated - open the document above for the full version.