XMR2023FCS950UWiFi & Bluetooth Module

RF Layout Application Note Rev. RF_Layout_Application_Note_2.2 Date: 2016-02-26 www.quectel.com RF Layout Application Note RF_Layout_Application_Note Confidential / Released 1 / 10 Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. Office 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233 Tel: +86 21 5108 6236 Mail: [email protected] Or our local office, for more information, please visit: http://www.quectel.com/support/salesupport.aspx For technical support, to report documentation errors, please visit: http://www.quectel.com/support/techsupport.aspx Or Email: [email protected] GENERAL NOTES QUECTEL OFFERS THIS INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. COPYRIGHT THIS INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL CO., LTD. TRANSMITTABLE, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THIS CONTENTS ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL OR DESIGN. Copyright © Quectel Wireless Solutions Co., Ltd. 2016. All rights reserved. Quectel Confidential RF Layout Application Note RF_Layout_Application_Note Confidential / Released 2 / 10 About the Document History Revision Date Author Description 1.0 2011-08-08 David WEI Initial 2.0 2014-10-16 Frank WANG 1. Used the new technical document template 2. Updated RF reference schematic diagram 2.1 2015-04-11 Frank WANG Added applicable modules 2.2 2016-02-26 Frank WANG Updated the example of PCB layout in Figure 6 Quectel Confidential RF Layout Application Note RF_Layout_Application_Note Confidential / Released 3 / 10 Contents About the Document ................................................................................................................................... 2 Contents ....................................................................................................................................................... 3 Figure Index ................................................................................................................................................. 4 1 Introduction .......................................................................................................................................... 5 2 RF Reference Schematic Diagram ..................................................................................................... 6 3 Coplanar Waveguide Structure Design ............................................................................................. 7 4 Coplanar WG PCB Layout Example and Guidelines ........................................................................ 9 Quectel Confidential RF Layout Application Note RF_Layout_Application_Note Confidential / Released 4 / 10 Figure Index FIGURE 1: RF REFERENCE SCHEMATIC DIAGRAM ...................................................................................... 6 FIGURE 2: STRUCTURE OF COPLANAR WG .................................................................................................. 7 FIGURE 3: TWO LAYERS PCB LAYOUT ........................................................................................................... 8 FIGURE 4: FOUR LAYERS PCB LAYOUT (THIRD LAYER AS REFERENCE GROUND) ................................ 8 FIGURE 5: FOUR LAYERS PCB LAYOUT (FOURTH LAYER AS REFERENCE GROUND) ............................ 8 FIGURE 6: AN EXAMPLE OF PCB LAYOUT...................................................................................................... 9 Quectel Confidential RF Layout Application Note RF_Layout_Application_Note Confidential / Released 5 / 10 1 Introduction The aim of this document is to offer some design rules for RF PCB layout, which will be helpful for achieving good RF performance and minimizing design period. This document is applicable to all Quectel GSM, WCDMA and LTE modules. Quectel Confidential RF Layout Application Note RF_Layout_Application_Note Confidential / Released 6 / 10 2 RF Reference Schematic Diagram Figure 1: RF Reference Schematic Diagram C1, R1 and C2 form a “PI” type matching circuit which is reserved for antenna optimization. By default, R1 is 0ohm while C1 and C2 are both Not Mounted (NM). Quectel Confidential RF Layout Application Note RF_Layout_Application_Note Confidential / Released 7 / 10 3 Coplanar Waveguide Structure Design The recommended coplanar waveguide structure is shown as Figure 2. Figure 2: Structure of Coplanar WG The factors which influence impedance include dielectric constant (usually 4.2~4.6, here is 4.4), dielectric height (H), RF trace width (W), the space between RF trace, the ground (S) and copper thickness (T). When T=0.035mm, the recommended value of W and S for 50 ohm coplanar WG under different PCB structure is listed in Table 1. Table 1: Recommended Value of W and S for 50 ohm Coplanar WG under Different PCB Structure Dielectric Height (H) RF Trace Width (W) Space between RF Trace and the Ground (S) 0.076mm 0.1188mm 0.15mm 0.1mm 0.1623mm 0.2mm 0.15mm 0.24mm 0.2mm Quectel Confidential RF Layout Application Note RF_Layout_Application_Note Confidential / Released 8 / 10 If there are two layers, the TOP layer is the signal layer, and the BOTTOM layer is the reference ground, as shown in Figure 3. If there are 4 layers, the reference ground could be the second layer, the third layer or the fourth layer. If…

Text truncated - open the document above for the full version.

FCS950U Hardware Design Wi-Fi&Bluetooth Module Series Version: 0.3 Date: 2022-11-29 Status: Draft Wi-Fi&Bluetooth Module Series FCS950U_Hardware_Design 1 / 46 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions License Agreements Documents and information provided by us shall be kept confidential, unless specific permission is granted. They shall not be accessed or used for any purpose except as expressly provided herein. Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non- exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. Wi-Fi&Bluetooth Module Series FCS950U_Hardware_Design 2 / 46 Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Third-Party Rights This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third- party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2022. All rights reserved. Wi-Fi&Bluetooth Module Series FCS950U_Hardware_Design 3 / 46 Safety Information The following safety precautions must be observed during all phases of operation, such as usage, service or repair of any cellular terminal or mobile incorporating the module. Manufacturers of the cellular terminal should notify users and operating personnel of the following safety information by incorporating these guidelines into all manuals of the product. Otherwise, Quectel assumes no liability for c…

Text truncated - open the document above for the full version.

Applicant/Grantee Quectel Wireless Solutions Co., Ltd. FCC ID: XMR2023FCS950U Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio portion of this module is shielded, please see exhibition external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The module has buffer modulation/data inputs. Y 3 The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. Please see the schem.pdf Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the Test Report exhibition. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). Please refer to the Setup Photo exhibition for the stand-alone test configuration. Y 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The Module will be labeled with its own FCC ID, and the instruction on the labeling rule of the end product has been stated in the User Manual of this module. Please refer to the Label and User Manual exhibition. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the User Manual. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Y _________________________________ Contact Person: Jean Hu E-mail: [email protected]

Rev. 1/1/03 Quectel Wireless Solutions Company Limited Date: December 20, 2022 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XMR2023FCS950U Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Part List Schematics Block Diagram Operation Description Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ Contact Person: Jean Hu E-mail: [email protected]

Quectel Wireless Solutions Company Limited Date: December 20, 2022 Power of Attorney To whom it may concern, Please be notified that I, Jean Hu, have designated Jim Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jim Tsai in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C 862. This authorization is limited to the product of as following: FCC ID: XMR2023FCS950U If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, ____ Contact Person: Jean Hu E-mail: [email protected]

1/1 Quectel Wireless Solutions Company Limited Date: December 20, 2022 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : XMR2023FCS950U To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: ⚫ External Photos ⚫ Internal Photos ⚫ Test set-up photos ⚫ Users Manual The application contains technical information, which Quectel Wireless Solutions Company Limited deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, ____ Contact Person: Jean Hu E-mail: [email protected]

Photographs of EUT Report No.: EP2D0802B Brand Name: Quectel / Model Name: FCS950U Sporton International Inc. (Kunshan) Page Number : 1 of 6 TEL : +86-512-57900158 Report Issued Date : Jan. 09, 2023 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: XMR2023FCS950U 720510 1. External Photograph of EUT Photographs of EUT Report No.: EP2D0802B Brand Name: Quectel / Model Name: FCS950U Sporton International Inc. (Kunshan) Page Number : 2 of 6 TEL : +86-512-57900158 Report Issued Date : Jan. 09, 2023 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: XMR2023FCS950U Photographs of EUT Report No.: EP2D0802B Brand Name: Quectel / Model Name: FCS950U Sporton International Inc. (Kunshan) Page Number : 3 of 6 TEL : +86-512-57900158 Report Issued Date : Jan. 09, 2023 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: XMR2023FCS950U 2. Photograph of Accessory

Label location: It’s on the shield

Photographs of EUT Report No.: EP2D0802B Brand Name: Quectel / Model Name: FCS950U Sporton International Inc. (Kunshan) Page Number : 3 of 5 TEL : +86-512-57900158 Report Issued Date : Jan. 16, 2023 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: XMR2023FCS950U 720510 2. Internal Photograph of EUT Photographs of EUT Report No.: EP2D0802B Brand Name: Quectel / Model Name: FCS950U Sporton International Inc. (Kunshan) Page Number : 4 of 5 TEL : +86-512-57900158 Report Issued Date : Jan. 16, 2023 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: XMR2023FCS950U Photographs of EUT Report No.: EP2D0802B Brand Name: Quectel / Model Name: FCS950U Sporton International Inc. (Kunshan) Page Number : 5 of 5 TEL : +86-512-57900158 Report Issued Date : Jan. 16, 2023 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: XMR2023FCS950U

Sporton International Inc. (Kunshan) Page Number : 1 of 8 TEL : 86-512-57900158 / FAX : 86-512-57900958 Report Issued Date : Jan. 16, 2023 FCC ID : XMR2023FCS950U Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA2D0802 RF Exposure Evaluation Report APPLICANT : Quectel Wireless Solutions Co., Ltd. EQUIPMENT : WiFi & Bluetooth Module BRAND NAME : Quectel MODEL NAME : FCS950U FCC ID : XMR2023FCS950U STANDARD : 47 CFR Part 2.1091 The product evaluation date was started from Jan. 11, 2023 and completed on Jan. 11, 2023. We, Sporton International Inc. (Kunshan), would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) Page Number : 2 of 8 TEL : 86-512-57900158 / FAX : 86-512-57900958 Report Issued Date : Jan. 16, 2023 FCC ID : XMR2023FCS950U Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA2D0802 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT TUNE UP POWER AMONG PRODUCTION UNITS ....................... 6 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 5.1. Standalone Power Density Calculation ............................................................................................. 8 Sporton International Inc. (Kunshan) Page Number : 3 of 8 TEL : 86-512-57900158 / FAX : 86-512-57900958 Report Issued Date : Jan. 16, 2023 FCC ID : XMR2023FCS950U Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA2D0802 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA2D0802 Rev. 01 Initial issue of report. Jan. 16, 2023 Sporton International Inc. (Kunshan) Page Number : 4 of 8 TEL : 86-512-57900158 / FAX : 86-512-57900958 Report Issued Date : Jan. 16, 2023 FCC ID : XMR2023FCS950U Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA2D0802 1. Administration Data 1.1. Testing Laboratory Sporton International Inc. (Kunshan) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.02. Testing Laboratory Test Firm Sporton International Inc. (Kunshan) Test Site Location No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China TEL : +86-512-57900158 FAX : +86-512-57900958 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. SAR01-KS CN1257 314309 Applicant Company Name Quectel Wireless Solutions Co., Ltd. Address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, 200233, China Manufacturer Company Name Quectel Wireless Solutions Co., Ltd. Address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, 200233, China Sporton International Inc. (Kunshan) Page Number : 5 of 8 TEL : 86-512-57900158 / FAX : 86-512-57900958 Report Issued Date : Jan. 16, 2023 FCC ID : XMR2023FCS950U Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA2D0802 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type WiFi & Bluetooth Module Brand Name Quectel Model Name FCS950U FCC ID XMR2023FCS950U Wireless Technology and Frequency Range WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.3GHz Band: 5260 MHz ~ 5320 MHz WLAN 5.5GHz Band: 5500 MHz ~ 5720 MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz Bluetooth: 2402 MHz ~ 2480 MHz Mode WLAN 2.4GHz 802.11b/g/n HT20/HT40 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE Antenna Gain WLAN2.4GHz/Bluetooth: 0.73 dBi WLAN5.2GHz: 1.14 dBi WLAN5.3GHz: 1.00 dBi WLAN5.5GHz: 0.60 dBi WLAN5.8GHz: 0.95 dBi Antenna Type WLAN/Bluetooth: Dipole Antenna HW Version R1.0 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Comments and Explanations: 1. The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 2. The maximum RF output tune up power, antenna gain also the safe distance used for evaluate RF exposure were declared by manufacturer. Sporton International Inc. (Kunshan) Page Number : 6 of 8 TEL : 86-512-57900158 / FAX : 86-512-57900958 Report Issued Date : Jan. 16, 2023 FCC ID : XMR2023FCS950U Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA2D0802 3. Maximum RF average output tune up power among production units <2.4GHz WLAN > Mode Maximum Average Power (dBm) 2.4GHz 802.11b 18.00 802.11g 18.00 802.11n-HT20 18.00 802.11n-HT40 16.00 <Bluetooth> Mode Maximum Average power(dBm) Bluetooth BR/EDR 10.00 LE 8.00 <5GHz WLAN > Mode Maximum Average Power (dBm) 5.2GHz 802.11a 18.00 802.11n-HT20 17.00 802.11n-HT40 17.00 802.11ac-VHT20 17.00 802.11ac-VHT40 17.00 802.11ac-VHT80 15.00 5.3GHz 802.11a 18.00 802.11n-HT20 17.00 802.11n-HT40 17.00 802.11ac-VHT20 17.00 802…

Text truncated - open the document above for the full version.

Antenna YE0038AA Datasheet Antenna Services Version: 3.1 Date: 2022-12-26 Status: Preliminary Antenna Services YE0038AA Datasheet Antenna_Datasheet 1 / 23 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Use and Disclosure Restrictions License Agreements Documents and inform…

Text truncated - open the document above for the full version.