XMR2023SG368ZWFSmart Module

SG368Z Series Hardware Design Smart Module Series Version: 1.0.0 Date: 2023-04-28 Status: Preliminary Smart Module Series SG368Z_Series_Hardware_Design 1 / 113 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: http://www.quectel.com/support/sales.htm. For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm. Or email us at: [email protected]. Legal Notices We offer information as a service to you. The provided information is based on your requirements and we make every effort to ensure its quality. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. We may revise or restate this document from time to time at our sole discretion without any prior notice to you. Copyright Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall not be copied, reproduced, distributed, merged, published, translated, or modified without prior written consent. We and the third party have exclusive rights over copyrighted material. No license shall be granted or conveyed under any patents, copyrights, trademarks, or service mark rights. To avoid ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-exclusive, royalty-free license to use the material. We reserve the right to take legal action for noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of the material. Trademarks Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel or any third party in advertising, publicity, or other aspects. Third-Party Rights Smart Module Series SG368Z_Series_Hardware_Design 2 / 113 This document may refer to hardware, software and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials shall be governed by all restrictions and obligations applicable thereto. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing or usage of trade. Privacy Policy To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, including carriers, chipset suppliers or customer-designated servers. Quectel, strictly abiding by the relevant laws and regulations, shall retain, use, disclose or otherwise process relevant data for the purpose of performing the service only or as permitted by applicable laws. Before data interaction with third parties, please be informed of their privacy and data security policy. Disclaimer a) We acknowledge no liability for any injury or damage arising from the reliance upon the information. b) We shall bear no liability resulting from any inaccuracies or omissions, or from the use of the information contained herein. c) While we have made every effort to ensure that the functions and features under development are free from errors, it is possible that they could contain errors, inaccuracies, and omissions. Unless otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, and exclude all liability for any loss or damage suffered in connection with the use of features and functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage may have been foreseeable. d) We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of information, advertising, commercial offers, products, services, and materials on third-party websites and third-party resources. Copyright © Quectel Wireless Solutions Co., Ltd. 2023. All rights reserved. Smart Module Series SG368Z_Series_Hardware_Design 3 / 113 Safety Information The following safety precautions must be observed during all phases of operation, such as usage, service or repair of any cellular terminal or mobile incorporating the module. Manufacturers of the cellular terminal should notify users and operating personnel of the following safety information by incorporating these guidelines into all manuals of the product. Quectel assumes no liability for customers’ failure to comply with these precautions. Full attention must be paid to driving at all times in order to reduce the risk of an accident. Using a mobile while driving (even with a handsfree kit) causes distraction and can lead to an accident. Please compl…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Quectel Wireless Solutions Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 9, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: XMR2023SG368ZWF [Quectel Wireless Solutions Co., Ltd.] (Jean Hu) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Name: Jean hu .. (2) Email: [email protected]...................... Signature: . Rev 1/26/2023 Quectel Wireless Solutions Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 9, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: XMR2023SG368ZWF [Quectel Wireless Solutions Co., Ltd.] (Jean Hu) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Name: Jean hu .. Email: [email protected]......... Signature: .

Rev 11/20/07 Quectel Wireless Solutions Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: XMR2023SG368ZWF Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (1. Block Diagram.pdf; 2.SCH.pdf; 3. Operation Description.pdf; 4.BOM.pdf; 5. Tune up.pdf;) (Block Diagram, SCH, Operation Description, BOM, Tune Up Procedure) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. Exhibit Type File Name (External Photos, Internal Photos, Test Setup Photos, Manual) (External Photos.pdf; Internal Photos.pdf; Appendix A.2 - WLAN Setup Photos; User Manual;) Sincerely, Name: Jean Hu Title: Certification Manager

RF_160, Issue 04 Quectel Wireless Solutions Co., Ltd. Declaration of Authorization We Name: Quectel Wireless Solutions Co., Ltd. Address: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China City: Shanghai Country: China Declare that: Name Representative of agent: Well Wei Agent Company name: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Address: South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: Smart Module Type designation: SG368Z-WF Trademark: Quectel FCC ID: XMR2023SG368ZWF on our behalf. Date: 2023/07/09.. City:  Shanghai .. Name:  Jean hu .. Email: [email protected]....... Signature: .

RF_734_02 04 April 16 Quectel Wireless Solutions Co., Ltd. Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: XMR2023SG368ZWF Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, please see exhibition external photos 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, the modular has buffer modulation /data inputs 3. The modular transmitter must have its own power supply regulation. Yes, please see the SCH.pdf 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, the requirements of antenna connector and spurious emission have been fulfilled. Please refer to the test report exhibition. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, please refer to the setup photo exhibition for the stand-alone configuration 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, the module will be label with its own FCC ID, and the instruction on the labelling rule of the end product has been stated in the user manual of this module. Please refer to the label and user manual exhibition. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, the required FCC rule has been fulfilled and all the instruction for maintaining compliance have been clearly stated in the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, please refer exhibition RF exposure for the compliance of MPE RF exposure rule. Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. RF_734_02 04 April 16 Name and surname of applicant (or authorized representative): Date: 2023/07/09.. City:  Shanghai .. Name:  Jean hu .. (2) Email: [email protected]....... Signature: .

Page 1 of 2 1 Photographs - EUT Constructional Details Test auxiliary PCB board and surrounding photos Model No.: SG368Z-WF FCC ID: XMR2023SG368ZWF IC: 10224A-23SG368ZWF Page 2 of 2

Label label location

1 Photographs - EUT Constructional Details Model No.: SG368Z-WF FCC ID: XMR2023SG368ZWF IC: 10224A-23SG368ZWF

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2306000206RG01 Rev.: 01 Page: 1 of 8 Authorized Signature: Well Wei Wireless Laboratory Manager TEST REPORT Application No.: SEWM2306000206RG Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China EUT Description: Smart Module Model No.: SG368Z-WF Trade Mark: Quectel FCC ID: XMR2023SG368ZWF Standards: 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 Date of Receipt: 2023/06/20 Date of Issue: 2023/07/07 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2306000206RG01 Rev.: 01 Page: 2 of 8 1 Version Revision Record Version Chapter Date Modifier Remark 01 2023/07/07 Original Prepared By (Nick Hu) / Test Engineer Checked By (Stone Gu) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2306000206RG01 Rev.: 01 Page: 3 of 8 Contents 1 Version ......................................................................................................................... 2 2 General Information ...................................................................................................... 4 2.1 Client Information .................................................................................................. 4 2.2 Test Facility ........................................................................................................... 4 2.3 General Description of EUT ................................................................................... 5 3 RF Exposure Evaluation ............................................................................................... 6 3.1 RF Exposure Compliance Requirement ................................................................ 6 3.1.1 Limits ................................................................................................................. 6 3.1.2 Test Procedure .................................................................................................. 7 3.1.3 EUT RF Exposure Evaluation ............................................................................ 7 3.1.4 Exposure calculations for multiple sources ........................................................ 8 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2306000206RG01 Rev.: 01 Page: 4 of 8 2 General Information 2.1 Client Information Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China 2.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6336.01) SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6336.01. • Innovation, Science and Economic Development Canada SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0120. IC#: 27594. • FCC –Designation Number: CN1312 SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized as an accredited testing laboratory. Designation Number: CN1312. Test Firm Registration Number: 717327 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2306000206RG01 Rev.: 01 Page: 5 of 8 2.3 General Description of EUT EUT Description: Smart Module Model No.: SG368Z-WF Trade Mark: Quectel Hardware Version: R1.0 Software Version: SG368ZWFNAR60A04 Antenna Type: External, Integrated Antenna Gain: BT/BLE: -0.5dBi (Ant0) 2.4GWIFI: -0.5dBi (Ant0) 5150MHz to 5250MHz: 2dBi (Ant0); 5250MHz to 5350MHz: 2dBi (Ant0); 5470MHz to 5725MHz: 3.2dBi (Ant0); 5725MHz to 5850MHz: 3.3dBi (Ant0); Note: The antenna gain are derived from the gain information report provided by the manufacturer. Remark: As above information is provided and confirmed by the applicant. SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2306000206RG01 Rev.: 01 Page: 6 of 8 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2 ) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the total power input to the…

Text truncated - open the document above for the full version.

` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 1 of 94 Authorized Signature: Ervin Li Regulatory Manager TEST REPORT Application No.: ZEWM2306000826RG Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China EUT Description: Smart Module Model No.: SG368Z-WF Trade Mark: Quectel FCC ID: XMR2023SG368ZWF Standards: FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C Date of Receipt: 2023/06/20 Date of Test: 2023/06/20 to 2023/07/07 Date of Issue: 2023/07/07 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 2 of 94 1 Version Revision Record Version Chapter Date Modifier Remark 01 2023/07/07 Original Prepared By (Dee Zheng) / Test Engineer Checked By (Daniel Wang) / Reviewer ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 3 of 94 2 Test Summary Test Item FCC Rule No. Test Method Test Result Result Test Lab [1] Antenna Requirement 15.203/15.247(b) -- Clause 4.1 PASS -- AC Power Line Conducted Emission 15.207 ANSI C63.10-2020 Section 6.2 Clause 4.3 PASS B Conducted Peak Output Power 15.247 (b)(1) ANSI C63.10-2020 Section 11.9.1.2 Clause 4.4 PASS A 20dB Emission Bandwidth & 99% Occupied Bandwidth 15.247 (a)(1) ANSI C63.10-2020 Section 6.9.2/6.9.3 Clause 4.5 For Report Purpose A Carrier Frequencies Separation 15.247 (a)(1) ANSI C63.10-2020 Section 7.8.2 Clause 4.6 PASS A Hopping Channel Number 15.247 (a)(1) ANSI C63.10-2020 Section 7.8.3 Clause 4.7 PASS A Dwell Time 15.247 (a)(1) ANSI C63.10-2020 Section 7.8.4 Clause 4.8 PASS A Band-edge for RF Conducted Emissions 15.247(d) ANSI C63.10-2020 Section 7.8.7.2 Clause 4.9 PASS A RF Conducted Spurious Emissions 15.247(d) ANSI C63.10-2020 Section 7.8.7.1 Clause 4.10 PASS A Radiated Spurious emissions 15.247(d); 15.205/15.209 ANSI C63.10-2020 Section 6.4 / 6.5 / 6.6 Clause 4.11 PASS A Restricted bands around fundamental frequency (Radiated Emission) 15.247(d); 15.205/15.209 ANSI C63.10-2020 Section 6.10.5 Clause 4.12 PASS A Remark: 1. Lab A SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Lab B SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 4 of 94 Contents 1 Version .......................................................................................................................... 2 2 Test Summary ............................................................................................................... 3 3 General Information ....................................................................................................... 5 3.1 Details of Client ................................................................................................. 5 3.2 Test Location .................................................................................................... 5 3.3 Test Facility ....................................................................................................... 6 3.4 General Description of EUT .............................................................................. 7 3.5 Test Environment .............................................................................................. 9 3.6 Description of Support Units ............................................................................. 9 4 Test results and Measurement Data ............................................................................ 10 4.1 Antenna Requirement ..................................................................................... 10 4.2 Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence ................................................................................................................... 11 4.2.1 Test Requirement: .................................................................................... 11 4.2.2 Conclusion ................................................................................................ 11 4.3 AC Power Line Conducted Emissions............................................................. 13 4.4 Conducted Output Power ................................................................................ 17 4.5 20dB Emission Bandwidth & 99% Occupied Bandwidth ................................. 18 4.6 Carrier Frequencies Separation ...................................................................... 19 4.7 Hopping Channel Number ............................................................................... 20 4.8 Dwell Time ...................................................................................................... 21 4.9 Band-edge for RF Conducted Emissions ........................................................ 22 4.10 Spurious RF Conducted Emissions................................................................. 23 4.11 Radiated Spurious Emissions ......................................................................... 24 4.12 Restricted bands around fundamental frequency ............................................ 27 5 Measurement Uncertainty (95% confidence levels, k=2) ............................................. 29 6 Equipment List ............................................................................................................. 30 7 Photographs - Setup Photos.............…

Text truncated - open the document above for the full version.

` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 51 of 94 Time of occupancy Test Result TestMode Antenna Hop/No Hop BurstWidth [ms] TotalHops [Num] Result[s] Limit[s] Verdict DH1 Ant0 Hop 0.360 320 0.115 ≤0.4 PASS DH3 Ant0 Hop 1.620 160 0.259 ≤0.4 PASS DH5 Ant0 Hop 2.870 106.67 0.306 ≤0.4 PASS 2DH1 Ant0 Hop 0.370 320 0.118 ≤0.4 PASS 2DH3 Ant0 Hop 1.630 160 0.261 ≤0.4 PASS 2DH5 Ant0 Hop 2.880 106.67 0.307 ≤0.4 PASS 3DH1 Ant0 Hop 0.370 320 0.118 ≤0.4 PASS 3DH3 Ant0 Hop 1.630 160 0.261 ≤0.4 PASS 3DH5 Ant0 Hop 2.880 106.67 0.307 ≤0.4 PASS ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 52 of 94 Test Graphs DH1_Ant0_Hop DH3_Ant0_Hop ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 53 of 94 DH5_Ant0_Hop 2DH1_Ant0_Hop ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 54 of 94 2DH3_Ant0_Hop 2DH5_Ant0_Hop ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 55 of 94 3DH1_Ant0_Hop 3DH3_Ant0_Hop ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 56 of 94 3DH5_Ant0_Hop ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 57 of 94 Number of hopping channels Test Result TestMode Antenna Hop/No Hop Result[Num] Limit[Num] Verdict DH5 Ant0 Hop 79 ≥15 PASS 2DH5 Ant0 Hop 79 ≥15 PASS 3DH5 Ant0 Hop 79 ≥15 PASS ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 58 of 94 Test Graphs DH5_Ant0_Hop 2DH5_Ant0_Hop ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 59 of 94 3DH5_Ant0_Hop ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 60 of 94 Band edge measurements Test Graphs DH5_Ant0_Low_2402 DH5_Ant0_High_2480 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 61 of 94 DH5_Ant0_Low_Hop_2402 DH5_Ant0_High_Hop_2480 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 62 of 94 2DH5_Ant0_Low_2402 2DH5_Ant0_High_2480 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 63 of 94 2DH5_Ant0_Low_Hop_2402 2DH5_Ant0_High_Hop_2480 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 64 of 94 3DH5_Ant0_Low_2402 3DH5_Ant0_High_2480 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 65 of 94 3DH5_Ant0_Low_Hop_2402 3DH5_Ant0_High_Hop_2480 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 66 of 94 Conducted Spurious Emission Test Graphs DH5_Ant0_2402_0~Reference DH5_Ant0_2402_30~1000 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 67 of 94 DH5_Ant0_2402_1000~26500 DH5_Ant0_2441_0~Reference ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 68 of 94 DH5_Ant0_2441_30~1000 DH5_Ant0_2441_1000~26500 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZEWM2306000826RG01 Page: 69 of 94 DH5_Ant0_2480_0~Reference DH5_Ant0_2480_30~1000 ` Doc No./Rev.: SGS-W-TRF-002 v02 SGS-CSTC Standards Technical Service…

Text truncated - open the document above for the full version.