XMR202406AF67EWi-Fi & Bluetooth Module

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Quectel Wireless Solutions Company Limited Address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China, 200233 FRN 0018988279 Grantee Code XMR FCC ID XMR202406AF67E Authorized Contact Name Jean Hu Contact Email [email protected] Contact Phone +8602150086326 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1)the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2)the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3)the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Quectel Wireless Solutions Company Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Quectel Wireless Solutions Company Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2024/9/13 Print Name: Jean Hu Title: Certification Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: XMR202406AF67E Items to be covered by Single modular transmitters. Answer from applicant 1.The modular transmitter must have its own RF shielding.Yes, please see exhibition external photos 2.The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, The modular has buffer modulation /data inputs 3.The modular transmitter must have its own power supply regulation.Yes, please see the schem.pdf 4.The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the test report exhibition. 5.The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, Please refer to the setup photo exhibition for the stand-alone configuration 6.The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, The Module will be label with its own FCC ID ,and the instruction on the labelling rule of the end product has been stated in the user manual of this module .please refer to the label and user manual exhibition. 7.The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, The required FCC rule has been fulfilled and all the instruction for maintaining compliance have been clearly stated in the user manual. 8.The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, Please refer exhibition RF exposure for the compliance of MPE RF exposure rule. RF_734_02 04 April 16 Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. Sincerely, Client’s signature: Client’s name/ title: Certification Manager Contact information/address: Quectel Wireless Solutions Company Limited

QuectelWirelessSolutionsCompanyLimited Date: 2024/9/13 TO:FederalCommunicationCommission EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MID 21046 Regarding FCC ID: XMR202406AF67E To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Quectel Wireless Solutions Company Limited. This authorization is valid until further written notice from the applicant. Name(Printed): Jean HuTitle: CertificationManager Signature: On behalfof Company:QuectelWirelessSolutionsCompanyLimited Telephone:86-021-51086236

QuectelWirelessSolutionsCompanyLimited To:SGS North AmericaInc. 620 Old PeachtreeRoad SUITE100 Suwanee,Georgia UnitedStates From:QuectelWirelessSolutionsCompanyLimited Building5, ShanghaiBusinessPark PhaseIII (Area B), No.1016TianlinRoad, MinhangDistrict,Shanghai,China,200233 Regarding: Confidentiality Request regarding application for FCC ID: XMR202406AF67E LONGTERMCONFIDENTIALITY Pursuantto 47 CFR Section0.459 and 0.457 of the commission’s rules, the applicantherebyrequest confidentialtreatmentof the documentslisted below,associatedwith the certificationapplication referencedabove. Schematic(s) Block Diagrams OperationalDescription NII SoftwareSecurityInfo The documentsabovecontainproprietaryinformationnot releasedto the public.Publicdisclosureof this informationmay prove harmfulto the businessof the applicant. SHORTTERMCONFIDENTIALITY Additionally,the applicantrequeststhe followingdocumentsbe held confidentialuntil the deviceis marketedor 180 days from the grant date, whicheveris less. If the deviceis marketedwithin 180 days of the Grant Date, the applicantwill notify the TCB per FCC KDB 726920D01 ConfidentialityRequest Procedures. ExternalPhotos InternalPhotos Test SetupPhotos User manual(s) Sincerely, Signature: PrintedName:Jean Hu Title: CertificationManager CompanyName:QuectelWirelessSolutionsCompanyLimited

Label Label Location

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUCR240700025107 Rev.: 01 Page: 1 of 8 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e- Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] Report Template No./Rev: SUWI-TRF-RF(FCC)003/ v01 Member of the SGS Group (SGS SA) South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215000 t (86-512) 62992980 www.sgsgroup.com.cn TEST REPORT Application No.: SUCR2407000251MO Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 EUT Description: Wi-Fi & Bluetooth Module Model No.: AF67E Trade Mark: Quectel FCC ID: XMR202406AF67E Standards: 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 Date of Receipt: July 12, 2024 Date of Issue: September 11, 2024 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Prepared by：Nature Shen/ Project Manager Approved by：Cloud Peng/ Technical Manager ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUCR240700025107 Rev.: 01 Page: 2 of 8 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e- Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] Report Template No./Rev: SUWI-TRF-RF(FCC)003/ v01 Member of the SGS Group (SGS SA) South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215000 t (86-512) 62992980 www.sgsgroup.com.cn 1 Version Revision Record Version Chapter Date Modifier Remark 01 September 11, 2024 Original ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUCR240700025107 Rev.: 01 Page: 3 of 8 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e- Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, pl…

Text truncated - open the document above for the full version.

Product OC: YEBT038WFA Version: 1.0 Date: 2023-10-16 Status: Preliminary Product Name: External WIFI Antenna Key Features: Frequency band: 2400–2500 MHz, 5150–5850 MHz Peak efficiency: 56.74 % Dimensions: Φ13mm * 195mm RoHS Compliant Antenna Datasheet Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 1 / 17 Overview Quectel Wi-Fi antenna covers 2.4 GHz and 5 GHz dual-bands, fully satisfying customers’ requirements for Wi-Fi 5 and Wi-Fi 6. There are various antenna types, including built-in FPC/PCB antenna, ceramic patch antenna, and other external antennas of different shapes or sizes. The antenna performance meets the customers’ demands for efficiency, gain, and radiation and ensures the superior experience of the customers’ products in use. Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 2 / 17 Contents Overview ...................................................................................................................................................... 1 Contents ...................................................................................................................................................... 2 1 Specification ...................................................................................................................................... 3 1.1. Electrical ..................................................................................................................................... 3 1.2. Mechanical, Environmental ........................................................................................................ 4 2 Drawing .............................................................................................................................................. 5 3 Detailed Performance ....................................................................................................................... 6 3.1. S-Parameter Test ....................................................................................................................... 6 3.1.1. VSWR .............................................................................................................................. 6 3.1.2. Return Loss ..................................................................................................................... 7 3.2. Radiation Performance Test ....................................................................................................... 8 3.2.1. Efficiency ......................................................................................................................... 8 3.2.2. Average Gain .................................................................................................................. 9 3.2.3. Peak Gain ...................................................................................................................... 10 3.2.4. 3D & 2D Radiation Pattern .............................................................................................11 3.2.4.1. Test Condition: Free Space ...................................................................................11 Contact Us................................................................................................................................................. 14 Legal Notices ............................................................................................................................................ 15 Revision History ....................................................................................................................................... 17 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 3 / 17 1 Specification Test Condition: Free Space 1.1. Electrical Electrical Frequency Range 2400–2500 MHz, 5150–5850 MHz Impedance 50 Ω Polarization Linear Radiation Pattern Omni-directional Antenna Type Dipole Band Specification Band Wi-Fi 2G Wi-Fi 5G Freq. (MHz) 2400 - 2500 5150 - 5250 5250 - 5350 5470 - 5725 5725 - 5850 Max. VSWR 1.4 2.7 2.7 2.6 2.4 Max. Return Loss (dB) -14.8 -6.8 -6.7 -7.2 -7.6 AVG Eff. (%) 50.8 36.1 34.1 34.0 35.7 AVG AVG Gain (dB) -3.0 -4.4 -4.7 -4.7 -4.5 Max. Peak Gain (dBi) -0.1 -0.9 -1.4 -0.3 0.4 VSWR ≤ 2.7 Return Loss ≤ -6.7 dB Peak Gain ≤ 0.4 dBi Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 4 / 17 1.2. Mechanical, Environmental Mechanical Antenna Dimensions Φ13 * 195mm Material & Color PC+PBT & Black Connector Type RP SMA Male Mounting Type Terminal Weight Typ.18g Environmental Operation Temperature -40 °C to +85 °C Storage Temperature -40 °C to +85 °C RoHS Compliant Yes Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 5 / 17 2 Drawing Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 6 / 17 3 Detailed Performance ⚫ Network Analyzer: Keysight E5071C (Device number: QTB6331E; Calibration date: 2022-06-24) ⚫ Chamber: OTA RayZone 2800 GTS (Device number: QTA0709; Calibration date: 2023-07-14) ⚫ Testing Software: Libra 3.1. S-Parameter Test 3.1.1. VSWR 1 2 3 4 5 6 7 8 9 10 20002100220023002400250026002700280029003000310032003300340035003600370038003900400041004200430044004500460047004800490050005100520053005400550056005700580059006000 VSWR Frequency(MHz) VSWR VSWR Frequency (MHz) 2400 2500 5150 5250 5350 5470 5725 5850 VSWR 1.7 1.0 2.6 2.7 2.7 2.6 2.4 2.1 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 7 / 17 3.1.2. Return Loss -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 20002100220023002400250026002700280029003000310032003300340035003600370038003900400041004200430044004500460047004800490050005100520053005400550056005700580059006000 Return Loss(dB) Frequency(MHz) Return Loss Return Loss (dB) Frequency (MHz) 2400 2500 5150 5250 5350 5470 5725 5850 Return Loss（dB） -11.7 -57.1 -7.2 -6.8 -6.9 -7.2 -7.6 -9.0 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 8 / 17 3.2. Radiation Performance Test 3.2.1. Efficiency 0 10 20 30 40 50 60 70 80 90 100 2000210022002300240025002600270028002900300031003200330034003500360037003800390040004100420043…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUCR240700025103 Rev.: 01 Page: 1 of 451 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e- Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] Report Template No./Rev: SUWI-TRF-RF(FCC)002/ v01 Member of the SGS Group (SGS SA) South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215000 t ( 86-512) 62992980 www.sgsgroup.com.cn TEST REPORT Application No.: SUCR2407000251MO Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 EUT Description: Wi-Fi & Bluetooth Module Model No.: AF67E Trade Mark: Quectel FCC ID: XMR202406AF67E Standards: FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C Date of Receipt: July 12, 2024 Date of Test: July 15, 2024 to August 28, 2024 Date of Issue: September 11, 2024 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Prepared by：Nature Shen/ Project Manager Approved by：Cloud Peng/ Technical Manager ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUCR240700025103 Rev.: 01 Page: 2 of 451 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e- Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] Report Template No./Rev: SUWI-TRF-RF(FCC)002/ v01 Member of the SGS Group (SGS SA) South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215000 t ( 86-512) 62992980 www.sgsgroup.com.cn Version Revision Record Version Chapter Date Modifier Remark 01 September 11, 2024 Original ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUCR240700025103 Rev.: 01 Page: 3 of 451 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e- Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 …

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Report No.: SUCR240700025103 Rev.: 01 Page: 122 of 451 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and- Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e- Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or …

Text truncated - open the document above for the full version.