XMR2025FCU865RWi-Fi & Bluetooth Module

QuectelWirelessSolutionsCompanyLimited 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:QuectelWirelessSolutionsCompanyLimited Address:Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016TianlinRoad,Minhang District,Shanghai,200233China ProductName:Wi-Fi&BluetoothModule FCCID:XMR2025FCU865R Model(s):FCU865R 2.911(d)(5)(i)EquipmentType We,[QuectelWirelessSolutionsCompanyLimited](“theapplicant”)certifythattheequipmentfor whichauthorizationissoughtthroughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:JeanHu TitleandCompanyname:CertificationManager/QuectelWirelessSolutionsCo.,Ltd. Date:November25,2025 NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

QuectelWirelessSolutionsCompanyLimited 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:QuectelWirelessSolutionsCompanyLimited Address:Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016TianlinRoad,Minhang District,Shanghai,200233China ProductName:Wi-Fi&BluetoothModule FCCID:XMR2025FCU865R Model(s):FCU865R 2.911(d)(5)(ii)Applicantfiling We,QuectelWirelessSolutionsCompanyLimited(“theapplicant”)certifythat,asofthedateofthe filingoftheapplication,theapplicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 ,established pursuantto§1.50002ofthischapter,asanentityproducingcoveredcommunicationsequipment. Yourssincerely, Name:JeanHu TitleandCompanyname:CertificationManager/QuectelWirelessSolutionsCompanyLimited Date:November25,2025 NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Quectel Wireless Solutions Company Limited, FRN: 0018988279, Grantee Code: XMR (“the applicant”) certifies that, as of the date of the filing of application, Ikotek USA, Inc., FRN: 0033350331 (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are: Physical U.S. address: 9920 Pacific Heights Blvd., Ste. 150, #7025, San Diego, CA 92121 Email: [email protected] The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Jean Hu Name: Joe Peterson Title: Certification Manager Title: CEO Email: [email protected] Email: [email protected] Date: 11 April, 2025 Date: 11 April, 2025

QuectelWirelessSolutionsCompanyLimited OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:November25,2025 Subject:RequestforConfidentiality FCCID:XMR2025FCU865R ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure NIISoftwareSecurityInfo Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:JeanHu Title:CertificationManager

QuectelWirelessSolutionsCompanyLimited LetterofAuthorization Company:QuectelWirelessSolutionsCompanyLimited Address:Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016TianlinRoad, MinhangDistrict,Shanghai,200233China ProductName:Wi-Fi&BluetoothModule ModelNumber(s):FCU865R ProductDescription:Wi-Fi&BluetoothModule WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signaure: Name:JeanHu Title:CertificationManager Company:QuectelWirelessSolutionsCo.,Ltd. Date:November25,2025

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Request for Modular/Limited Modular Approval Date: November 27, 2025 Subject: Manufacturer’s Declaration for ☒ - Modular Approval ☐ - Split Modular Approval ☐ - Limited Modular Approval ☐ - Limited Split Modular Approval Confidentiality Request for: ____ XMR2025FCU865R _____ 8 Basic Requirements – FCC Part 15.212(a)(1) For Items Marked “NO(*)”, the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) ☒ - YES ☐ - NO(*) Details: <example – The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector> 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) ☒ - YES ☐ - NO(*) Details: <example – Data to the modulation circuit is buffered as described in the operational description provided with the application> 3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii) ☒ - YES ☐ - NO(*) Details: <example – The module contains its own power supply regulation. Please refer to schematic filed with this application> 4. The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) ☒ - YES ☐ - NO(*) Details: <example – The module connects to its antenna using an UFL connector which is considered a non-standard connector. A list of antennas tested and approved with this device may be found in users manual provided with the application> 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) ☒ - YES ☐ - NO(*) Details: <example – The module was tested stand-alone as shown in test setup photographs filed with this application> THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Modular Approval Requirement Requirement Met 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) ☒ - YES ☐ - NO(*) Details: <example – There is a label on the module as shown in the labeling exhibit filed with this applicati…

Text truncated - open the document above for the full version.

Due to the module being too small to accommodate the ID, the FCC ID is reflected on page 42 and the IC ID is reflected on the last page of the manual Product package Label

Sushi TOWE Wireless Testing (Shenzhen) Co., Ltd. Report No.: TCWA25110102806 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. TEST REPORT Applicant: Quectel Wireless Solutions Co., Ltd. EUT Description: Wi-Fi & Bluetooth Module Model: FCU865R Brand: QUECTEL FCC ID: XMR2025FCU865R Standards: FCC 47 CFR Part 2.1091 Date of Receipt: 2025/11/06 Date of Issue: 2025/11/24 TOWE. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. the results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of the model are manufactured with identical electrical and mechanical components. All sample tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. without written approval of TOWE, the test report shall not be reproduced except in full. Jim Huang Approved By: Carey Chen Reviewed By: Page 2 / 9 Report No.: TCWA25110102806 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Revision History Rev. Issue Date Description Revised by 01 2025/11/24 Original Carey Chen Page 3 / 9 Report No.: TCWA25110102806 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Table of Contents 1 General Description .............................................................................................................................. 4 1.1 Lab Information ...................................................................................................................... 4 1.1.1 Testing Location ................................................................................................................ 4 1.1.2 Test Facility / Accreditations ............................................................................................. 4 1.2 Client Information ................................................................................................................... 4 1.2.1 Applicant ............................................................................................................................ 4 1.2.2 Manufacturer ..................................................................................................................... 4 1.3 Product Information ............................................................................................................... 5 2 Maximum Permissible RF Exposure ................................................................................................... 6 2.1 RF Exposure Limit Introduction ........................................................................................... 6 2.2 Equations ................................................................................................................................ 7 3 RF Exposure Results ............................................................................................................................ 8 3.1 Standalone Exposure Calculations ...................................................................................... 8 3.1 Multiple Sources Exposure Calculations ............................................................................ 9 Page 4 / 9 Report No.: TCWA25110102806 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. 1 General Description 1.1 Lab Information 1.1.1 Testing Location These measurements tests were conducted at the Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. facility located at F401 and F101, Building E, Hongwei Industrial Zone, Liuxian 3rd Road, Bao'an District, Shenzhen, China. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 Tel.: +86-755-27212361 Contact Email: [email protected] 1.1.2 Test Facility / Accreditations A2LA (Certificate Number: 7088.01) This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). FCC Designation No.: CN1353 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. has been recognized as an accredited testing laboratory. Designation Number: CN1353. ISED CAB identifier: CN0152 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. has been recognized by ISED as an acc…

Text truncated - open the document above for the full version.

Sushi TOWE Wireless Testing (Shenzhen) Co., Ltd. Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. TEST REPORT Applicant: Quectel Wireless Solutions Co., Ltd. EUT Description: Wi-Fi & Bluetooth Module Model: FCU865R Brand: QUECTEL FCC ID: XMR2025FCU865R Standards: FCC 47 CFR Part 15 Subpart C Date of Receipt: 2025/11/06 Date of Test: 2025/11/06 to 2025/11/24 Date of Issue: 2025/11/24 TOWE. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. the results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of the model are manufactured with identical electrical and mechanical components. All sample tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. without written approval of TOWE, the test report shall not be reproduced except in full. Jim Huang Approved By: Carey Chen Reviewed By: Page 2 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Revision History Rev. Issue Date Description Revised by 01 2025/11/24 Original Carey Chen Page 3 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Summary of Test Results Clause FCC Part Test Items Result 4.1 §15.203/15.247(b) Antenna Requirement PASS 4.2 §15.207 AC Power Line Conducted Emission N/A 4.3 §15.247 (b)(3) Output Power PASS 4.4 §15.247 (a)(2) Occupied Bandwidth Reporting purposes only 4.5 §15.247 (e) Power Spectral Density PASS 4.6 §15.247(d) Band Edge for Conducted Emissions PASS 4.7 §15.247(d) Spurious RF Conducted Emissions PASS 4.8 §15.205 §15.209 Radiated Spurious emissions and Band Edge PASS Test Method: ANSI C63.10:2020, KDB 558074 D01 15.247 Mesa Guidance v05r02. Remark: 1. Pass is EUT meets standard requirements. 2. The EUT is DC power supply, “N/A” denotes “not applicable”. Page 4 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Table of Contents 1 General Description .............................................................................................................................. 5 1.1 Lab Information ...................................................................................................................... 5 1.1.1 Testing Location ................................................................................................................ 5 1.1.2 Test Facility / Accreditations ............................................................................................. 5 1.2 Client Information ................................................................................................................... 5 1.2.1 Applicant ............................................................................................................................ 5 1.2.2 Manufacturer ..................................................................................................................... 5 1.3 Product Information ............................................................................................................... 6 2 Test Configuration ................................................................................................................................ 7 2.1 Test Channel ........................................................................................................................... 7 2.2 Worst-case configuration and Mode .................................................................................... 8 2.3 Support Unit used in test ....................................................................................................... 8 2.4 Test Environment ................................................................................................................... 8 2.5 Test RF Cable .......................................................................................................................... 8 2.6 Modifications .......................................................................................................................... 8 2.7 Test Setup Diagram ................................................................................................................ 9 2.7.1 Conducted Configuration .................................................................................................. 9 2.7.2 Radiated Co…

Text truncated - open the document above for the full version.

Page 36 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Test Graphs BLE_1M-Ant1-2402-0~Reference-PASS BLE_1M-Ant1-2402-30~1000-PASS BLE_1M-Ant1-2402-1000~26500-PASS BLE_1M-Ant1-2440-0~Reference-PASS BLE_1M-Ant1-2440-30~1000-PASS BLE_1M-Ant1-2440-1000~26500-PASS Page 37 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. BLE_1M-Ant1-2480-0~Reference-PASS BLE_1M-Ant1-2480-30~1000-PASS BLE_1M-Ant1-2480-1000~26500-PASS BLE_2M-Ant1-2402-0~Reference-PASS BLE_2M-Ant1-2402-30~1000-PASS BLE_2M-Ant1-2402-1000~26500-PASS Page 38 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. BLE_2M-Ant1-2440-0~Reference-PASS BLE_2M-Ant1-2440-30~1000-PASS BLE_2M-Ant1-2440-1000~26500-PASS BLE_2M-Ant1-2480-0~Reference-PASS BLE_2M-Ant1-2480-30~1000-PASS BLE_2M-Ant1-2480-1000~26500-PASS Page 39 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. BLE_125K-Ant1-2402-0~Reference-PASS BLE_125K-Ant1-2402-30~1000-PASS BLE_125K-Ant1-2402-1000~26500-PASS BLE_125K-Ant1-2440-0~Reference-PASS BLE_125K-Ant1-2440-30~1000-PASS BLE_125K-Ant1-2440-1000~26500-PASS Page 40 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. BLE_125K-Ant1-2480-0~Reference-PASS BLE_125K-Ant1-2480-30~1000-PASS BLE_125K-Ant1-2480-1000~26500-PASS BLE_500K-Ant1-2402-0~Reference-PASS BLE_500K-Ant1-2402-30~1000-PASS BLE_500K-Ant1-2402-1000~26500-PASS Page 41 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. BLE_500K-Ant1-2440-0~Reference-PASS BLE_500K-Ant1-2440-30~1000-PASS BLE_500K-Ant1-2440-1000~26500-PASS BLE_500K-Ant1-2480-0~Reference-PASS BLE_500K-Ant1-2480-30~1000-PASS BLE_500K-Ant1-2480-1000~26500-PASS Page 42 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Duty Cycle Test Result TestMode Antenna Frequency[MHz] ON Time [ms] Period [ms] Duty Cycle [%] Duty Cycle Factor[dB] BLE_1M Ant1 2402 0.40 0.63 63.49 1.97 BLE_1M Ant1 2440 0.40 0.63 63.49 1.97 BLE_1M Ant1 2480 0.40 0.63 63.49 1.97 BLE_2M Ant1 2402 0.21 0.63 33.33 4.77 BLE_2M Ant1 2440 0.21 0.63 33.33 4.77 BLE_2M Ant1 2480 0.21 0.63 33.33 4.77 BLE_125K Ant1 2402 3.11 3.75 82.93 0.81 BLE_125K Ant1 2440 3.11 3.75 82.93 0.81 BLE_125K Ant1 2480 3.11 3.75 82.93 0.81 BLE_500K Ant1 2402 1.07 1.87 57.22 2.42 BLE_500K Ant1 2440 1.07 1.87 57.22 2.42 BLE_500K Ant1 2480 1.07 1.87 57.22 2.42 Page 43 / 74 Report No.: TCWA25110102802 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Test Graphs NTNV-BLE_1M-Ant1-2402 NTNV-BLE_1M-Ant1-2440 NTNV-BLE_1M-Ant1-2480 NTNV-BLE_2M-Ant1-2402 NTNV-BLE_2M-Ant1-2440 NTNV-BLE_2M-Ant1-2480 Page 44 / 74 Report No.: TCWA251…

Text truncated - open the document above for the full version.