XMR2025KGM133SBluetooth Low Energy and 802.15.4 wireless radio module

FCCCOVEREDLISTDECLARATIONLETTER Page 1 of 1 Revision1.0 SGSNorthAmericaInc. 620OldPeachtreeRoad SUITE100 Suwanee,Georgia30024 UnitedStates ApplicantLegalBusinessNameQuectelWirelessSolutionsCompanyLimited Address Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016TianlinRoad,MinhangDistrict,Shanghai,China, 200233 FRN0018988279 GranteeCodeXMRFCCID:XMR2025KGM133S AuthorizedContactNameJeanHu [email protected] QuectelWirelessSolutionsCompanyLimited(“theapplicant”)certifies: -theequipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. -asofthedateofthefilingoftheapplication,theapplicant[isnot]identifiedontheCoveredlist,establishedpursuantto§1.50002,asanentity producing“covered”equipment. -thesoftwaretobeloadedpriortomarketingoftheequipmentidentifiedaboveisnot“covered”softwaremanufacturedbyanyentityincluding predecessors,successors,parents,subsidiaries,affiliatesoranyentitywhichhasrebrandedorrelabeledthesoftwareproducedbytheentity(ies) identifiedonthe“CoveredList”. -thedeviceisnotcapableofstoringorrunningsoftwarelistedonthecoveredlistandthereforeisinherentlycompliant. LinktotheCoveredList:CoveredList ApplicantSignature:Date:2025-11-17 PrintName: JeanHu Title: CertificationManager *NOTE:ThisdeclarationcannotbesignedbyanAgent,itshallbesignedbyanauthorizedpersonlistedintheFCCdatabase

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Quectel Wireless Solutions Company Limited, FRN: 0018988279, Grantee Code: XMR (“the applicant”) certifies that, as of the date of the filing of application, Ikotek USA, Inc., FRN: 0033350331 (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are: Physical U.S. address: 9920 Pacific Heights Blvd., Ste. 150, #7025, San Diego, CA 92121 Email: [email protected] The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Jean Hu Name: Joe Peterson Title: Certification Manager Title: CEO Email: [email protected] Email: [email protected] Date: 11 April, 2025 Date: 11 April, 2025

ApplicantDeclaration QSF27-14-04Rev1.4April25,2025Page 1 of 1 OriginalIssue:Jan.4,2021 SGSNorthAmericaInc. 620OldPeachtreeRoad SUITE100 Suwanee,Georgia30024 UnitedStates ApplicantLegalBusinessName QuectelWirelessSolutionsCompanyLimited Address Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016TianlinRoad,MinhangDistrict, Shanghai,China,200233 FRN 0018988279 GranteeCode XMR FCCID: XMR2025KGM133S AuthorizedContactName JeanHu ContactPhone +8602150086326 ContactEmail [email protected] I,theundersigned,certifythatIamanauthorizedsignatoryfortheApplicantandthereforedeclare; a)inaccordancewith47CFR2.911(d),allofthestatementshereinandtheexhibitsattachedheretoaretrueandcorrecttothebestofmy knowledgeandbelief. b)inacceptingaGrantofEquipmentAuthorizationissuedbyaTCB,undertheauthorityoftheFCC,asaresultoftherepresentationsmadein thisapplication,theApplicantisresponsiblefor: (1)labelingtheequipmentwiththeexactFCCIDasspecifiedinthisapplication, (2)compliancestatementlabelingpursuanttotheapplicablerules, (3)complianceoftheequipmentwiththeapplicabletechnicalrules, c)iftheApplicantisnottheactualmanufactureroftheequipment,appropriatearrangementshavebeenmadewiththemanufacturertoensure thatproductionunitsofthisequipmentwillcontinuetocomplywiththeFCC’stechnicalrequirements. d)inaccordancewith47CFR2.909andKDB394321,theApplicanthasread,understoodandagreestoacceptthattheyaretheresponsible partyandagreetoabidebytheirresponsibilitiesasspecifiedunder47CFR2.909andKDB394321. e)inaccordancewithISO17065,FCCKDB641163,FCCKDB610077,KDB394321andRSP-100,theApplicanthasread,understood,accepts andagreestoabidebythepostmarketsurveillancerequirements. (1)theApplicantunderstands,acceptsandagreesthatasamplemayberequestedforsurveillancetesting. (2)theApplicantshallmakeprovisionstoalwayshaveaproductionsampleavailableuponrequestbySGS,FCCand/orISED. (3)theApplicantshall,uponrequestbySGS,attheApplicant’sexpense,provideaproductionsampleoftherequestedproducttoSGS, FCCand/orISEDasinstructed.Thesampleshallincludeallsupportdevices,cables,software,accessoriesorotherhardwareor softwarerequiredforevaluation,review,certificationandauditsurveillanceofproductscertifiedbySGS. f)neithertheApplicantnoranypartytotheapplicationissubjecttoadenialofFederalbenefits,thatincludesFCCbenefits,pursuanttoSection 5301oftheAnti-DrugAbuseActof1988,21U.S.C.§862becauseofaconvictionforpossessionordistributionofacontrolledsubstance.See 47CFR1.2002(b)forthedefinitionofa“party”forthesepurposes. g)theApplicanthasread,understood,acceptsandagreestoabidebytheSGSNorthAmerica,Inc.termsandconditionsasspecifiedintheTCB ApplicationForm731(QSF27-14-01). LinktoCFRs:https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 LinktoKDBs:https://apps.fcc.gov/oetcf/kdb/index.cfm LinktoRSP-100:https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html LinktotheCoveredList:CoveredList ApplicantSignature: Date:2025-11-17 PrintName:JeanHu Title:CertificationManager *NOTE:ThisdeclarationcannotbesignedbyanAgent,itshallbesignedbyanauthorizedpersonlistedintheFCCdatabase

Quectel Wireless Solutions Company Limited 2025-11-17 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Quectel Wireless Solutions Company Limited Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China, 200233 Regarding: Confidentiality Request regarding application for FCC ID: XMR2025KGM133S LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagram Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User Manual Signature: Printed Name: Jean Hu Title: Certification Manager Company Name: Quectel Wireless Solutions Company Limited

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: XMR2025KGM133S Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, please see exhibition external photos 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, The modular has buffer modulation /data inputs 3. The modular transmitter must have its own power supply regulation. Yes, please see the schematics 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the test report exhibition. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, Please refer to the setup photo exhibition for the stand-alone configuration 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, The Module will be label with its own FCC ID ,and the instruction on the labelling rule of the end product has been stated in the user manual of this module .please refer to the label and user manual exhibition. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, The required FCC rule has been fulfilled and all the instruction for maintaining compliance have been clearly stated in the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, Please refer exhibition RF exposure for the compliance of MPE RF exposure rule. RF_734_02 04 April 16 Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. Sincerely, Client’s signature: Client’s name/ title: Certification Manager Contact information/address: Quectel Wireless Solutions Company Limited

QuectelWirelessSolutionsCompanyLimited Date:2025-11-17 TO:FederalCommunicationCommission EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MID21046 Regarding:FCCID:XMR2025KGM133S Towhomitmayconcern: We,theundersigned,herebyauthorizeParlamZhantoactonourbehalfinallmannersrelatingto applicationforequipmentauthorizationwithrespecttotheFCCIDabove,includingsigningofall documentsrelatingtothesematters.Anyandallactscarriedoutbytheagentonourbehalfshallhave thesameeffectasactsofourown. We,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits,thatincludes FCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.853(a). Whereouragentsignstheapplicationforcertificationonourbehalf,Iacknowledgethatallresponsibility forcomplyingwiththetermsandconditionsforCertification,asspecifiedbySGSNorthAmerica,Inc.,still resideswithQuectelWirelessSolutionsCompanyLimited. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. Name (Printed) :JeanHuTitle:CertificationManager Signature: OnbehalfofCompany:QuectelWirelessSolutionsCompanyLimited Telephone:+86-021-51086236

` Report No.: SUCR251000100004 Page: 1 of 10 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] RF Exposure Evaluation Report Application No.: SUCR2510001000MO Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Equipment Under Test (EUT): EUT Name: Bluetooth Low Energy and 802.15.4 wireless radio module Model No.: KGM133S Trade Mark: QUECTEL FCC ID: XMR2025KGM133S Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-10-16 Date of Issue: 2025-11-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. ` Report No.: SUCR251000100004 Page: 2 of 10 Revision Record Version Description Date Remark 01 Original 2025-09-03 / Authorized for issue by: Tested By Nature Shen / Project Manager Approved By Cloud Peng/Technical Manager ` Report No.: SUCR251000100004 Page: 3 of 10 1 Contents Page 1 Contents ................................................................................................................................................... 3 2 General Information ................................................................................................................................ 4 2.1 General Description of E.U.T. .......................................................................................................... 4 2.2 Separation Distance ......................................................................................................................... 4 2.3 Test Location .................................................................................................................................... 5 2.4 Test Facility ...................................................................................................................................... 5 3 RF Exposure Test Exemptions .............................................................................................................. 6 3.1 RF Exposure Test Exemptions for single RF sources ..................................................................... 6 3.2 RF Exposure Test Exemptions for Simultaneous Transmission ...................................................... 8 4 Measurement and Calculation ............................................................................................................. 10 4.1 Maximum transmit power ............................................................................................................... 10 4.2 RF Exposure Calculation................................................................................................................ 10 ` Report No.: SUCR251000100004 Page: 4 of 10 2 General Information 2.1 General Description of E.U.T. Hardware Version: R1.0 Software Version: NA Power Supply: 3.3V Antenna Type: External, Integrated Antenna Gain: BLE: 0.2 dBi Thread: 0.2 dBi Note: The antenna gain are derived from the gain information report provided by the manufacturer. Remark: As above information is provided and confirmed by the applicant. SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 2.2 Separation Distance Separation distance between the antenna to person (R): ＞20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. R has been stated in user manual. ` Report No.: SUCR251000100004 Page: 5 of 10 2.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone Post code: 215000 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable). 2.4 Test Facility The test fa…

Text truncated - open the document above for the full version.

Product OC: YEBT038WFA Version: 0.1 Date: 2024-05-08 Status: Preliminary Product Name: External Wi-Fi/BT Antenna Key Features: Frequency band: 2400–2500 MHz, 5150–5850 MHz, 5925–7125 MHz Peak efficiency: 50.12 % Dimensions: Φ13 mm × 195 mm RoHS Compliant Antenna Datasheet Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 1 / 36 Overview Quectel Wi-Fi/BT antenna covers BT, 2.4 GHz, 5 GHz, and up to 7 GHz bands, fully satisfying customers’ requirements for BT, Wi-Fi 5, Wi-Fi 6, and Wi-Fi 6E/Wi-Fi 7. There are various antenna types, including built-in FPC/PCB antenna, ceramic patch antenna, and other external antennas of different shapes or sizes. The antenna performance meets the customers’ demands for efficiency, gain, and radiation and ensures the superior experience of the customers’ products in use. Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 2 / 20 Contents Overview ...................................................................................................................................................... 1 Contents ...................................................................................................................................................... 2 1 Specification ...................................................................................................................................... 3 1.1. Electrical ..................................................................................................................................... 3 1.2. Mechanical & Environmental ..................................................................................................... 4 2 Drawing .............................................................................................................................................. 5 3 Detailed Performance ....................................................................................................................... 6 3.1. S-Parameter Test ....................................................................................................................... 6 3.1.1. VSWR .............................................................................................................................. 6 3.1.2. Return Loss ..................................................................................................................... 8 3.2. Radiation Performance Test ....................................................................................................... 9 3.2.1. Efficiency ......................................................................................................................... 9 3.2.2. Average Gain ................................................................................................................ 10 3.2.3. Peak Gain .......................................................................................................................11 3.2.4. 3D & 2D Radiation Pattern ............................................................................................ 12 3.2.4.1. Test Condition: Free Space .................................................................................. 12 4 Packaging ........................................................................................................................................ 15 Contact Us................................................................................................................................................. 17 Legal Notices ............................................................................................................................................ 18 Revision History ....................................................................................................................................... 20 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 3 / 20 1 Specification Test Condition: Free Space 1.1. Electrical Electrical Frequency Range 2400–2500 MHz, 5150–5850 MHz, 5925–7125 MHz Impedance 50 Ω Polarization Linear Radiation Pattern Omni-directional Antenna Type Dipole Band Specification Band Wi-Fi 2G BT Wi-Fi 5G Wi-Fi 7G Freq. (MHz) 2400 - 2500 5150 - 5250 5250 - 5350 5470 - 5725 5725 - 5850 5925-7125 Max. VSWR 2.0 2.8 2.8 2.7 2.4 2.3 Max. Return Loss (dB) -9.3 -6.6 -6.4 -6.7 -7.6 -8.0 AVG Eff. (%) 40.6 40.6 38.6 33.8 28.7 33.4 AVG Gain (dB) -4.0 -3.9 -4.1 -4.7 -5.4 -4.8 Max. Peak Gain (dBi) 0.2 （2500MHz） -0.7 （5155MHz） -0.8 （5260MHz） -1.2 （5480MHz） -1.5 （5820MHz） 1.6 （6915MHz） VSWR ≤ 2.8 Return Loss ≤ -6.4 dB Peak Gain ≤ 1.6 dBi Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 4 / 20 1.2. Mechanical & Environmental Mechanical Antenna Dimensions Φ13 mm × 195 mm Material & Color TPEE & Black Connector Type RP SMA Male Mounting Type Terminal Weight Typ. 18 g Environmental Operation Temperature -40 °C to +85 °C Storage Temperature -40 °C to +85 °C RoHS Compliant Yes Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 5 / 20 2 Drawing Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 6 / 20 3 Detailed Performance ⚫ Network Analyzer: Keysight E5071C (Device number: QTB6331E; Calibration date: 2023-12-27; Due date:2025-06-26) ⚫ Chamber: OTA RayZone 2800 GTS (Device number: QTA0709; Calibration date: 2023-07-14; Due date:2024-07-13) ⚫ Testing Software: Libra ⚫ Manufacturer: Quectel Wireless Solutions (Changzhou) Co., Ltd. Address: No.8 Nanhu West Road, Wujin District, Changzhou City, Jiangsu Province, China 3.1. S-Parameter Test 3.1.1. VSWR 1 2 3 4 5 6 7 8 9 10 200022002400260028003000320034003600380040004200440046004800500052005400560058006000620064006600680070007200 VSWR Frequency(MHz) VSWR Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 7 / 20 VSWR Frequency (MHz) 2400 2500 5150 5155 5250 5260 5350 5470 5480 VSWR 2.0 1.4 2.5 2.5 2.8 2.8 2.8 2.7 2.7 Frequency (MHz) 5725 5820 5850 5925 6325 6725 6915 7125 VSWR 2.0 2.4 2.4 2.3 1.6 1.3 1.1 1.7 Antenna Services YEBT038WFA Datasheet Antenna_Datasheet 8 / 20 3.1.2. Return L…

Text truncated - open the document above for the full version.

Report No.: SUCR251000100001 Page: 1 of 137 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] TEST REPORT Application No.: SUCR2510001000MO Applicant: Quectel Wireless Solutions Co., Ltd. Address of Applicant: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer: Quectel Wireless Solutions Co., Ltd. Address of Manufacturer: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Equipment Under Test (EUT): EUT Name: Bluetooth Low Energy and 802.15.4 wireless radio module Model No.: KGM133S Trade Mark: QUECTEL FCC ID: XMR2025KGM133S Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-10-16 Date of Test: 2025-11-04 to 2025-11-07 Date of Issue: 2025-11-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: SUCR251000100001 Page: 2 of 137 Revision Record Version Description Date Remark 01 Original 2025-11-12 / Authorized for issue by: Tested By Nature_Shen/Project Engineer Approved By Cedar Cheng /Reviewer Report No.: SUCR251000100001 Page: 3 of 137 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2020) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Report No.: SUCR251000100001 Page: 4 of 137 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 5 4.1 Details of E.U.T. ............................................................................................................................... 5 4.2 Environment Parameter ................................................................................................................... 5 4.3 Description of Support Units ............................................................................................................ 5 4.4 Measurement Uncertainty & Decision Rule ..................................................................................... 6 4.5 Test Location .................................................................................................................................... 7 4.6 Test Facility ...................................................................................................................................... 7 4.7 Deviation from Standards ................................................................................................................. 7 4.8 Abnormalities from Standard Conditions ...…

Text truncated - open the document above for the full version.