XMRHSM110XCBluetooth Module

HSM110XC Hardware Design Short-Range Products Version: 1.0.0 Date: 2026-04-10 Status: Preliminary Sho rt-Range Products HSM110XC_Hardware_Design 1 / 53 At Quectel, our aim is to provide timely and comprehensive services to our customers. If you require any assistance, please contact our headquarters: Quectel Wireless Solutions Co., Ltd. No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Tel: +86 21 5108 6236 Email: [email protected] Or our local offices. For more information, please visit: https://www.quectel.com/contact/. For technical support, or to report documentation errors, please visit: https://www.quectel.com/tech-support/. Or email us at: [email protected]. Legal Notices We provide this document to support your product design. You are required to design your products based on the specifications and parameters set forth herein. You agree that you are responsible for using independent analysis and evaluation in designing intended products, and we provide reference designs for illustrative purposes only. Before using any hardware, software or service guided by this document, please read this notice carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, you hereby acknowledge and agree that this document and related services hereunder are provided to you on an “as available” basis. You acknowledge and agree that we may add to, amend, or restate this document at any time at our sole discretion without any prior notice to you, and such additions, amendments, or restatements shall be binding upon you. Use and Disclosure Restrictions License Agreements The recipient of any hardware, software, materials, or documentation provided by us shall keep such content confidential, unless expressly authorized by us. The recipient shall not disclose, access, or use any part of the received content for any purpose other than the execution and implementation of the intended project. Copyright Our and third-party products hereunder may contain copyrighted materials, including but not limited to protected content, hardware, software, and documentation owned by us or applicable third parties. Unless prior written consent is obtained, you shall not access, use, or disclose any documents or information provided by us, nor shall you copy, reproduce, republish, display, translate, distribute, merge, modify, or create derivative works from any such copyrighted materials. We and the applicable third party retain exclusive rights to all copyrighted materials. No license to any patents, copyrights, trademarks, or service marks shall be granted or transferred. For the avoidance of doubt, no form of purchase shall be construed as granting any license beyond a normal, non-exclusive, royalty-free license to use the product. We reserve the right to pursue legal action against any violation of confidentiality obligations, unauthorized use, or any other unlawful or malicious use of the aforementioned documents and information. Sho rt-Range Products HSM110XC_Hardware_Design 2 / 53 Trademarks Unless otherwise expressly provided, nothing in this document shall be construed as conferring any rights to use any trademark, trade name, name, abbreviation, or counterfeit thereof owned by us or any third party in advertising, publicity, or any other contexts. Third-Party Rights You understand that this document may refer to hardware, software, and/or documentation owned by one or more third parties (“third-party materials”). Use of such third-party materials is subject to all applicable restrictions and obligations set forth herein. We make no warranty or representation, either express or implied, regarding the third-party materials, including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular purpose, quiet enjoyment, system integration, information accuracy, and non-infringement of any third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, offer for sale, or otherwise maintain production of any our products or any other hardware, software, device, tool, information, or product. We moreover disclaim any and all warranties arising from the course of dealing, course of performance, or usage of trade. Privacy Policy To enable product functionality, certain device data may be uploaded to our or third-party servers, including those operated by carriers, chipset suppliers, or servers designated by you. We strictly comply with applicable laws and regulations and will retain, use, disclose, or otherwise process relevant data solely for the purpose of enabling product functionality, or as permitted by applicable laws. Before interacting with any third party regarding data exchange, please be informed of and understand their privacy and data security policies. Disclaimer a) We shall not be liable for any damages resulting from failure to comply with applicable operational or design specifications. b) We shall bear no liability for any inaccuracies or omissions in this document, nor for any damages arising from the use of the information contained herein. c) While we make every effort to ensure the integrity, accuracy, and timeliness of the features and functions under development, errors or omissions may nevertheless occur. Unless otherwise provided in a valid written agreement, we make no warranties of any kind, express, implied, or statutory, and disclaim all liability for any loss or damage arising from the use of any features or functions under development, to the maximum extent permitted by law, regardless of whether such loss or damage is foreseeable. d) We assume no legal responsibility for the accessibility, safety, accuracy, availability, legality, or completeness of any information, content, advertising, commercial offers, products, se…

Text truncated - open the document above for the full version.

QuectelWirelessSolutionsCo.,Ltd. No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China Rev2026-04-24 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:May27,2026 Ref:AttestationStatementsPart2.911(d)(5)(i)andPart2.911(d)(5)(ii) FCCID:XMRHSM110XC Part2.911(d)(5)(i) QuectelWirelessSolutionsCo.,Ltd.(“theapplicant”)certifiesthattheequipmentforwhichauthorization issoughtisnot“covered”equipmentanddoesnotcontainanti-virussoftwareorcybersecuritysoftware prohibitedfromreceivinganequipmentauthorizationpursuantto47CFR2.903,KDB986446D01 CoveredEquipmentGuidance,andFCCCoveredList(www.fcc.gov/supplychain/coveredlist). Part2.911(d)(5)(ii) [QuectelWirelessSolutionsCo.,Ltd.](“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofits subsidiariesoraffiliates)asanentityproducing“covered”equipment. Sincerely, Applicantsignature:____________________ JeanHu(May27,2026)/CertificationManager

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Quectel Wireless Solutions Company Limited, FRN: 0018988279, Grantee Code: XMR (“the applicant”) certifies that, as of the date of the filing of application, Ikotek USA, Inc., FRN: 0033350331 (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are: Physical U.S. address: 9920 Pacific Heights Blvd., Ste. 150, #7025, San Diego, CA 92121 Email: [email protected] Phone: (+1) 858-344-8120 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Jean Hu Name: Joe Peterson Title: Certification Manager Title: President and CEO Email: [email protected] Email: [email protected] Date: 16 April, 2026 Date: 16 April, 2026

QuectelWirelessSolutionsCo.,Ltd. No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China Date:May27,2026 FederalCommunicationCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 ConfidentialityRequestregardingapplicationforcertificationofFCCID:XMRHSM110XC PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: BlockDiagram Schematics OperationalDescription PCBlayout BOM Tuneup Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. Sincerely, GranteeContact’sSignature: Printedname:JeanHu(June9,2026) Title:CertificationManager

QuectelWirelessSolutionsCo.,Ltd. DeclarationofAuthorization We Name:QuectelWirelessSolutionsCo.,Ltd. Address:No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China Declarethat: NameRepresentativeofagent:Ms.RileyWei AgentCompanyname:BTLInc. Address:No.29,JintangRoad,TangzhenIndustryParkPudongNewArea City:Shanghai Country:China isauthorizedtoapplyforCertificationofthefollowingproduct(s),includingthesingingoftherelated documentssuchasICapplicationform(s)/731forms: Productdescription:BluetoothModule Typedesignation:HSM110XC Trademark:QUECTEL IC:10224A-HSM110XC FCCID:XMRHSM110XC onourbehalf. Signature:_______________ Name:JeanHu(May27,2026) Function:CertificationManager Date:May27,2026 City:Shanghai

QuectelWirelessSolutionsCo.,Ltd. No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China LabelLocationJustificationLetter We, QuectelWirelessSolutionsCo.,Ltd. No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China Declarethat: Productdescription:BluetoothModule Typedesignation:HSM110XC Trademark:QUECTEL Dimensions:(6±0.1)mm×(6+0.1)mm×(0.9+0.1)mm Weight:Approx.0.05g Themoduleistoosmalltoaccommodatealegiblepermanentlabelwithafontsizeof4‑pointorlarger. Therefore,inaccordancewith: 47CFR§2.925(f)–IfadeviceissosmallthatitisimpracticaltolabelitwiththeFCCIdentifierinafont thatisfour-pointorlarger,andthedevicedoesnothaveadisplaythatcanshowelectroniclabeling, thentheFCCIdentifiershallbeplacedintheusermanualandmustalsoeitherbeplacedonthedevice packagingoronaremovablelabelattachedtothedevice; ISEDRSS‑Gen,Section4.1–Ifthedimensionsoftheproductareextremelysmalloritisnotpractical toplacethelabelormarkingontheproduct,andifelectroniclabellingcannotbeimplemented,the labelshallbeplacedinaprominentlocationintheusermanualsuppliedwiththeproduct,asagreed uponwithISEDpriortothecertificationapplication.Theusermanualmaybeinanelectronicformat;if itisnotsuppliedtotheuser,theusermanualmustbereadilyavailable. theFCCIDandICIDareplacedasfollows: FCCID:XMRHSM110XC IC:10224A-HSM110XC Thefollowinginformationisprovidedintheusermanualoronthepackaging: Statement:"ContainsFCCID:XMRHSM110XC"and"ContainsIC:10224A-HSM110XC" Signature: Name:JeanHu(June16,2026) Function:CertificationManager Date:June16,2026 City:Shanghai

QuectelWirelessSolutionsCo.,Ltd. No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China M:\TEMPLATES\ModularApprovalLetter_140225.docx Revision:140225Page 1 of 2 ApprovedBy:GGreene MODULARAPPROVALLETTER FCCID:XMRHSM110XCisseekingFCCAuthorizationasa SingleModularTransmitter SingleLimitedModularTransmitter TheEUTmeetstherequirementsfor: SingleModularApproval SingleLimitedModularApproval asdetailedinKDB996369.Compliancetoeachoftherequirementsis describedbelow: ModularApprovalRequirementYes/N o Comments (i)Theradioelementsofthemodular transmittermusthavetheirown shielding.Thephysicalcrystalandtuning capacitorsmaybelocatedexternaltothe shieldedradioelements. NoNo,Sincesamplesdo nothave theirownRFshielding, apply forLimitedModularity Certification(LMA).The moduleisinstalledby professionals (ii)Themodulartransmittermusthave bufferedmodulation/datainputs(ifsuch inputsareprovided)toensurethatthe modulewillcomplywithpart 15requirementsunderconditionsof excessivedataratesorover-modulation. YesYes,themodularhas buffer modulation/datainputs (iii)Themodulartransmittermusthave itsownpowersupplyregulation. YesYes,pleaseseethe SCH.pdf (iv)Themodulartransmittermustcomply withtheantennaandtransmission systemrequirementsof§§15.203, 15.204(b)and15.204(c).Theantenna musteitherbepermanentlyattachedor employa‘‘unique’’antennacoupler(atall connectionsbetweenthemoduleandthe antenna,includingthecable).The ‘‘professionalinstallation’’provisionof§ 15.203isnotapplicabletomodulesbut canapplytolimitedmodular approvalsunderparagraph(b)ofthis section. YesYes,therequirements of antennaconnectorand spuriousemissionhave been fulfilled.Pleasereferto the testreportexhibition. (v)Themodulartransmittermustbe testedinastand-aloneconfiguration YesYes,pleaserefertothe setup QuectelWirelessSolutionsCo.,Ltd. No.8WaipojingRoad,SijingTown,SongjiangDistrict,Shanghai201601,China M:\TEMPLATES\ModularApprovalLetter_140225.docx Revision:140225Page 2 of 2 ApprovedBy:GGreene photoexhibitionforthe stand-alone configuration (vi)Themodulartransmittermustbe equippedwitheitherapermanently affixedlabelormustbecapableof electronicallydisplayingitsFCC identificationnumber. YesYes,themodulewillbe label withitsownFCCID, andthe instructiononthe labelling ruleoftheendproduct has beenstatedintheuser manualofthismodule. Please refertothelabeland user manualexhibition. (vii)Themodulartransmittermust complywithanyspecificrulesor operatingrequirementsthatordinarily applytoacompletetransmitterandthe manufacturermustprovideadequate instructionsalongwiththemoduleto explainanysuchrequirements.Acopyof theseinstructionsmustbeincludedinthe applicationforequipmentauthorization. YesYes,therequiredFCC rulehas beenfulfilledandall the instructionfor maintaining compliancehavebeen clearly statedintheuser manual. (viii)Themodulartransmittermust complywithanyapplicableRFexposure requirementsinitsfinalconfiguration. YesYes,pleaserefer exhibition RFexposureforthe complianceofMPERF exposurerule. Printedname/Title:JeanHu(June8,2026)/CertificationManager Date:June8,2026

Project No.: 2604H054 Page 1 of 5 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2604H054 Page 2 of 5 Project No.: 2604H054 Page 3 of 5 Project No.: 2604H054 Page 4 of 5

Short-Range Products HSM110XC_Hardware_Design 41 / 48 7.3. Top View Figure 20: Top View Image above is for illustration purpose only and may differ from the actual module. For authentic appearance and label, please refer to the module received from Quectel. NOTE

Project No.: 2604H054 Page 5 of 5 BLE ant.

Report No.: BTL-FCCP-2-2604H054 Report Version:R00 Page 1 of 7 FCC RF EXPOSURE REPORT FCC ID: XMRHSM110XC Project No. : 2604H054 Equipment : Bluetooth Module Brand Name : QUECTEL Model Name : HSM110XC Applicant : Quectel Wireless Solutions Co., Ltd. Address : No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Date of Receipt : Apr. 23, 2026 Date of Test : Apr. 23, 2026~May 09, 2026 Issued Date : May 26, 2026 Test Sample : Engineering Sample No.: SH920260423223 Standard(s) : KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Shanghai) Prepared by : Grani Zhou Approved by : Riley Wei Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210, People’s Republic of China. Tel: +86-021-61765666 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2604H054 Report Version:R00 Page 2 of 7 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacturer's responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2604H054 Report Version:R00 Page 3 of 7 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2604H054 R00 Original Report. May 26, 2026 Valid Report No.: BTL-FCCP-2-2604H054 Report Version:R00 Page 4 of 7 1. TEST FACILITY The test facilities used to collect the test data in this report is at the location of No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China 2. GENERAL CONCULUSION According to FCC §§1.1307 and KDB 447498 D04, the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW). 1) Option A. 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. 2) Option B. SAR-Based Exemption A more comprehensive exemption, considering a variable power threshold that depends on both the separation distance and power, is provided in § 1.1307(b)(3)(i)(B). This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. Accordingly, a RF source is considered an RF exempt device if its available maximum time-averaged (matched conducted) power or its effective radiated power (ERP), whichever is greater, are below a specified threshold. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Report No.: BTL-FCCP-2-2604H054 Report Version:R00 Page 5 of 7 Table B2-Example Power Thresholds (mW) Frequency (MHz) Distance(mm) mW 5 10 15 20 25 30 35 40 45 50 300 39 65 88 110 129 148 166 184 201 217 450 22 44 67 89 112 135 158 180 203 226 835 9 25 44 66 90 116 145 175 207 240 1900 3 12 26 44 66 92 122 157 195 236 2450 3 10 22 38 59 83 111 143 179 219 3600 2 8 18 32 49 71 96 125 158 195 5800 1 6 14 25 40 58 80 106 136 169 3) Option C MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna …

Text truncated - open the document above for the full version.

品名：ACA-1005-P1-CC-S History List 版本 REV. 修訂者 EDITOR 修訂頁次 PAGE 修訂內容 ITEMS OF CHANGE 申請日期 DATE 生效日期 VALID DATE ECN編號 ECN NO. A0 Huiwenchan ALL New Release 2025/04/23 According to the date of PLM Release N/A INPAQ TECHNOLOGY CO., LTD 2025-04-23 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：SHLEE CHECKED BY：SHLEE DESIGNED BY：William APPROVED BY：MARCO TITLE：ACA-1005-P1-CC-S DOCUMENT ENS070002110-000824000364 SPEC REV. NO. A0 PAGE 2 OF 10 品名P/N：ACA-1005-P1-CC-S 1.Explanation of part number： AC A - 1005 - P1 - CC - S Product Type Center Frequency/Band Code Product Code (Unit: mm) Design Revision Code Antenna Type Special Code Chip Antenna A: 2.4GHz E: Cellular G:868MHz H:915MHz L:5GHz M3:2G+5GHz N:NFC Per 2 digits of length, width e.g.: 1005 1.0*0.5(Length * Width) P1:Rev.1 CC: Coupling Ceramic GF: On Ground, FR4 LC: Loop ceramic MC: Monopole Ceramic MF: Monopole FR4 PF: PIFA FR4 S: RoHS Compliant 2.Electrical Specification： Item Specification Working Frequency Range 2400 ~ 2500 MHz Return Loss -7 dB Peak Gain 1 dBi (Typical) VSWR 2.6 max. Polarization Linear Vertical Radiation Pattern Directional Impedance 50 Moisture sensitivity levels MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020) HBM ESD Pass 1KV on all pins (Base on AEC-Q200-002) MM ESD Pass 200V (Base on EIA/JESD22-A115) Operating & Storage Condition (Component) Operation Temperature Range: -40 ~ +85 °C Storage Temperature Range: -40 ~ +85 °C Storage Condition before Soldering (Included packaging material) Storage Temperature Range: +5 ~ +40 °C Humidity: 30 to 70% relative humidity INPAQ TECHNOLOGY CO., LTD 2025-04-23 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：SHLEE CHECKED BY：SHLEE DESIGNED BY：William APPROVED BY：MARCO TITLE：ACA-1005-P1-CC-S DOCUMENT ENS070002110-000824000364 SPEC REV. NO. A0 PAGE 3 OF 10 Top view Side view Bottom view Side view 3. CONSTRUCTION： TOP View DIMENSIONS Figure Symbol Dimension (mm) L 1.00 ± 0.10 W 0.50 ± 0.10 T 0.35 ± 0.10 A 0.10 ± 0.10 B 0.30 ± 0.10 C 0.20 ± 0.10 D 0.50 ± 0.10 E 0.125 ± 0.10 PIN Specification P1 Feeding P2 GND_1 P3 GND_2 P4 Feeding P1 P2 P4 P3 INPAQ TECHNOLOGY CO., LTD 2025-04-23 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：SHLEE CHECKED BY：SHLEE DESIGNED BY：William APPROVED BY：MARCO TITLE：ACA-1005-P1-CC-S DOCUMENT ENS070002110-000824000364 SPEC REV. NO. A0 PAGE 4 OF 10 4. Recommend PCB Layout： Test Board Teat EVB 40 x 20 x 0.8 mm 3 INPAQ TECHNOLOGY CO., LTD 2025-04-23 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：SHLEE CHECKED BY：SHLEE DESIGNED BY：William APPROVED BY：MARCO TITLE：ACA-1005-P1-CC-S DOCUMENT ENS070002110-000824000364 SPEC REV. NO. A0 PAGE 5 OF 10 Land Pattern Empty Space 5 x 3 mm 2 INPAQ TECHNOLOGY CO., LTD 2025-04-23 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：SHLEE CHECKED BY：SHLEE DESIGNED BY：William APPROVED BY：MARCO TITLE：ACA-1005-P1-CC-S DOCUMENT ENS070002110-000824000364 SPEC REV. NO. A0 PAGE 6 OF 10 5. Antenna on Test Board ( Thickness: 0.8mm)： Return Loss Frequency (MHz) Return Loss (dB) 2400 - 9.9 2450 - 18.7 2500 - 8.4 INPAQ TECHNOLOGY CO., LTD 2025-04-23 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：SHLEE CHECKED BY：SHLEE DESIGNED BY：William APPROVED BY：MARCO TITLE：ACA-1005-P1-CC-S DOCUMENT ENS070002110-000824000364 SPEC REV. NO. A0 PAGE 7 OF 10 RADIATION PATTERN (XZ plane) (YZ plane) (XY plane) INPAQ TECHNOLOGY CO., LTD 2025-04-23 UNLESS OTHER SPECIFIED TOLERANCES ON： INPAQ TECHNOLOGY CO., LTD. X＝N/A X.X＝N/A X.XX＝N/A ANGLES＝N/A HOLEDIA＝N/A SCALE：N/A UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY：SHLEE CHECKED BY：SHLEE DESIGNED BY：William APPROVED BY：MARCO TITLE：ACA-1005-P1-CC-S DOCUMENT ENS070002110-000824000364 SPEC REV. NO. A0 PAGE 8 OF 10 6. RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235  5°C *Immersion time：2  0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：2705°C *Immersion time：101 sec Solder：Sn3Ag0.5…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2604H054 Report Version: R01 Page 1 of 74 FCC Radio Test Report FCC ID: XMRHSM110XC This report concerns: Original Grant Project No. : 2604H054 Equipment : Bluetooth Module Brand Name : QUECTEL Model Name : HSM110XC Applicant : Quectel Wireless Solutions Co., Ltd. Address : No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Manufacturer : Quectel Wireless Solutions Co., Ltd. Address : No. 8 Waipojing Road, Sijing Town, Songjiang District, Shanghai 201601, China Date of Receipt : Apr. 23, 2026 Date of Test : Apr. 23, 2026~May 09, 2026 Issued Date : Jun. 05, 2026 Test Sample : Engineering Sample No.: SH920260423223 for conducted, SH920260423226 for radiation. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Shanghai) Prepared by : Grani Zhou Approved by : Riley Wei No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210, People’s Republic of China. Te l : +86-021-61765666 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2604H054 Report Version: R01 Page 2 of 74 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacturer's responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by …

Text truncated - open the document above for the full version.