XNAWBS08Withings Body Scan

WITHINGS PRODUCT GUIDE BODY SCAN EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK 2 This guide explains how to use your Withings Body Scan and gives additional regulatory information on how to use the Withings Scan Monitor 2.0 on your Withings Body Scan. It applies to users in the United States of America. Important notice Before using Withings Body Scan, review the information in this guide. You may also find this guide online at: https://www.withings.com/guides For more information on how to use the Withings Scan Monitor 2.0 with your Withings Body Scan, please refer to the Withings Scan Monitor 2.0 Product Guide, available in the packaging. Retain this documentation for future reference. Installation instructions are available within the Quick Start Guide provided with this user guide. Please contact Withings when in need of assistance, setting up, using or maintaining the device or to report unexpected operations or events. Any serious incident that has occurred in relation to the Withings Body Scan should be reported to Withings and competent authorities in your country of residence. Disclaimer Information in this guide may change without notice. Intended Use Contraindications Withings Body Scan is a connected smart scale providing the following wellness features: - measure weight - calculate Body Mass Index (BMI) - measure pulse rate - estimate vascular age - compute electrodermal activity score Additionally, Withings Body Scan is intended: to measure body composition for weight management purposes, and to maintain healthy levels of muscle, bone and fat mass, and encourage healthy living. It is intended for use in adults. Do not use the Withings Body Scan if you have a cardiac pacemaker, an implantable cardioverter-defibrillator (ICD), or other implanted electronic devices. ! EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK 3 Warnings & safety notice ! - Self-diagnosis and self-treatment can be dangerous. Always consult your doctor in case of questions or doubts. - If you are pregnant, accuracy may be impacted for body composition analysis, electrodermal activity score, vascular age and ECG. Consult your doctor during pregnancy. - Misuse of the device can cause injury. - Do not step on the scale with wet feet. Potential allergic reac- tions may occur due to contact with materials used in the device. - The device is not intended to continuously monitor vital signs in critical conditions or where the nature of the variations is such that it could result in immediate danger to the user. - The device does not provide alarms. - Keep away from children and pets. Small parts may be inhaled or swallowed. - Exposing the device to prolonged lint, dust or light (including sunlight) may reduce its life or damage it. - Inspect electrodes for warping, surface damage or corrosion and check for any other form of damage. - Do not use the device if it is damaged. Use of a damaged device could cause injury or equipment failure. - Do not submerge the scale or any of the components in water. - Do not try to repair or modify this equipment yourself. No service or repairs should be performed on the device other than the maintenance listed in this guide. - Do not use accessories, detachable parts, or materials not described in the product guide. - Avoid using the device on feet with poor skin integrity, such as cuts, wounds or damaged skin. - No modification of this equipment is allowed. - Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in impro- per operation. - Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the device, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result. - Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. - Do not interconnect this equipment with other equipment not described in the product guide. - Follow operational and storage conditions as described in the technical specifications section of this guide. Otherwise, mea- surement results may be impacted. - The power cord of the charger and the handle cable may cause a strangulation effect due to excessive length. Keep it away from children and pets. - Do not open or disassemble the device for battery replacement. EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK 4 How to use Withings Body Scan and take a first measurement - Follow the information in the Quick Start Guide and in the Withings application to set-up your device. - To wake up your device for the first time, please press the power button for 3 seconds. If your product is not starting, consider charg- ing it for a minimum of three hours and try again. - Once your product is installed and configured, it will appear in your devices list in settings. - You may have to follow some tutorials in the Withings application in order to activate some measurements. To activate the ECG please refer to the indications available within the ScanMonitor 2.0 Product Guide. - To take the first measurement, grab the handle (optional) and step on the scale with bare feet. Your name, or trigram (as configured in the app), will appear on the scale’s screen at the end of the weight measurement: it means your scale has correctly identified you and the measurements sequence (as defined in the app) will follow. - If it is not the case, the measurement will most likely appear in “Unknown Measurements” in the application. Please assign it to your user so that the scale can automatically recognize the user during the next weigh-in. EN FR…

Text truncated - open the document above for the full version.

LETTER HEAD Date: January 16, 2023 Subject: Ad Hoc Mode Function Declaration FCC ID: XNAWBS08 To Whom it may concern, We, Withings declare that the device does not support any non-US channels and country code selection and Channel 12 and 13 in 2.4 GHz band in all the operational mode(s). Regards, -------------------------------------------------------------------------------------- Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

(Insert company letter head) Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: February 9, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Withings certifies that the equipment [FCC ID: XNAWBS08] for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Withings certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Sincerely, ------------------------------------------------------------------------------------ Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

WITHINGS Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Withings and XNA certifies that, as of the date of the filing of application, Withings Inc is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are: Physical U.S. address: Withings Inc 225 Franklin St, Ste 1250 Boston, MA US 02110 Email: [email protected] FRN: 0033495748 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Xavier Debreuil Name: Paul Buckley Title: Product Director Title: Sales & Marketing Director Email: [email protected] Email: [email protected] Date: 2023-03-07 Date: 2023-03-07

Date: 2023/1/16 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: XNAWBS08 Product name: Withings Body Scan To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model WBS08 to the FCC Rules and Regulations. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. -------------------------------------------------------------------------------------- Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

Date: January 16, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: XNAWBS08 To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180 days from the day of the grant. ☒ Internal Photographs ☒ External Photographs ☒ User's manual ☒ Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒ Block Diagram ☒ Schematics ☒ Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. ------------------------------------------------------------------------------------ Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

To Whom It May Concern: This letter is to certify that the following Withings product: Brand name and model type of the specified radio equipment: Withings / WBS08 FCC ID: XNAWBS08 Product name: Withings Body Scan Exhibits the following behaviors: - The scale connects to webservice server through Wi-Fi one time everyday. - Wi-Fi and Bluetooth communication never occurs while weight is being measured. The device can detect the presence of the user thanks to its weight sensors (load cells). If someone is stepping on the scale it will not transmit by WiFi or BLE. - Wi-Fi or Bluetooth communication is started after user was weighted. -------------------------------------------------------------------------------------- Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

Label location FCC ID: XNAWBS08

Project No.: EP261601-04 Page No. : 6 of 23 Project No.: EP261601-04 Page No. : 7 of 23 Project No.: EP261601-04 Page No. : 8 of 23 Project No.: EP261601-04 Page No. : 9 of 23 Project No.: EP261601-04 Page No. : 10 of 23 Project No.: EP261601-04 Page No. : 11 of 23 Project No.: EP261601-04 Page No. : 12 of 23 Project No.: EP261601-04 Page No. : 13 of 23 Project No.: EP261601-04 Page No. : 14 of 23 Project No.: EP261601-04 Page No. : 15 of 23 Project No.: EP261601-04 Page No. : 16 of 23 Project No.: EP261601-04 Page No. : 17 of 23 Project No.: EP261601-04 Page No. : 18 of 23 Project No.: EP261601-04 Page No. : 19 of 23 Project No.: EP261601-04 Page No. : 20 of 23 Project No.: EP261601-04 Page No. : 21 of 23 Project No.: EP261601-04 Page No. : 22 of 23 Project No.: EP261601-04 Page No. : 23 of 23

Report No.: FA261601-04 Page : 1 of 6 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. FCC RF Exposure Report FCC ID : XNAWBS08 Equipment : Withings Body Scan Model No. : WBS08 Brand Name : Withings Applicant : Withings Address : 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Standard : 47 CFR FCC Part 2.1091 Received Date : Jan. 04, 2023 Tested Date : Jan. 11 ~ Jan. 16, 2023 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FA261601-04 Page : 2 of 6 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. Table of Contents 1 RF EXPOSURE TEST EXEMPTIONS ................................................................................................... 4 1.1 1-mW TEST EXEMPTION ..................................................................................................................... 4 1.2 SAR-BASED EXEMPTION .................................................................................................................... 4 1.3 MPE-BASED EXEMPTION .................................................................................................................... 4 1.4 REFERENCE GUIDANCE ..................................................................................................................... 5 1.5 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 5 1.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 1.7 EXEMPTION CALCULATION ................................................................................................................ 5 2 TEST LABORATORY INFORMATION ................................................................................................. 6 Report No.: FA261601-04 Page : 3 of 6 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. Release Record Report No. Version Description Issued Date FA261601-04 Rev. 01 Initial issue Mar. 07, 2023 FA261601-04 Rev. 02 Re-evaluation since maximum tune up limit is modified. Mar. 30, 2023 Report No.: FA261601-04 Page : 4 of 6 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. 1 RF Exposure Test Exemptions 1.1 1-mW TEST EXEMPTION Available maximum time-averaged power is no more than 1 mW. 1.2 SAR-BASED EXEMPTION This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. The maximum time-averaged power or effective radiated power (ERP), whichever is greater, ≤ Pth Pth (mW) = ERP 20cm (d/20) x d≤20cm Pth (mW) = ERP 20cm 20 cm < d ≤40cm Where = - log 10 Pth (mW) = ERP 20cm (mW) = 2040f 0.3GHz ≤ f < 1.5 GHz Pth (mW) = ERP 20cm (mW) = 3060 1.5GHz ≤ f < 6 GHz Frequency (MHz) Power Thresholds mW dBm 663 1353 31.31 699 1426 31.54 704 1436 31.57 777 1585 32.00 824 1681 32.26 902 1840 32.65 1500 ~ 6000 3060 34.86 1.3 MPE-BASED EXEMPTION For a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. Radio Source Frequency Minimum Distance Threshold ERP F L MHz F H MHz λ L / 2π λ H / 2π W 0.3 - 1.34 159 m - 35.6 m 1920 R 2 1.34 - 30 35.6 m - 1.6 m 3450 R 2 /f 2 30 - 300 1.6 m - 159 mm 3.83 R 2 300 - 1500 159 mm - 31.8 mm 0.0128 R 2 f 1500 - 100000 31.8 mm - 0.5 mm 19.2 R 2 Note: R is the antenna-person separation distance. Report No.: FA261601-04 Page : 5 of 6 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. 1.4 REFERENCE GUIDANCE 447498 D04 Interim General RF Exposure Guidance v01. 1.5 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE None 1.6 MEASUREMENT UNCERTAINTY The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)). Parameters Uncertainty Conducted power ±0.808 dB Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 1.7 EXEMPTION CALCULATION Frequency Range (MHz) Maximum Conducted Power (dBm) Maximum tune up Limit (dBm) Antenna Gain (dBi) EIRP (dBm) ERP (dBm) ERP (mW) SAR-Based Exemption Thresholds (mW) Pass/ Fail 2412-2462 14.46 16 2.8 18.8 16.65 46.24 3060 Pass 2402-2480 3.25 5 2.8 7.8 5.65 3.67 3060 Pass Note: Minimum separation distance = 20 cm. Report No.: FA261601-04 Page : 6 of 6 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. 2 Test laboratory information Established in 2012, ICC provides foremost EMC & RF Testing and advisory consultation services by our skilled engineers and technicians. Our services employ a wide variety of advanced edge test equipment and one of the widest certification extents in the business. International Certification Corporation (EMC and Wireless Communication Laboratory), it is our definitive objective is to institute long term, trust-based associations with our clients. The expectation we set up with our clients is based on outstanding se…

Text truncated - open the document above for the full version.

Report No.: FR261601-04AC Page : 1 of 18 Report Version: Rev. 01 FCC Test Report FCC ID : XNAWBS08 Equipment : Withings Body Scan Model No. : WBS08 Brand Name : Withings Applicant : Withings Address : 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Standard : 47 CFR FCC Part 15.247 Received Date : Jan. 04, 2023 Tested Date : Jan. 11 ~ Jan. 16, 2023 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FR261601-04AC Page : 2 of 18 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 7 1.3 Test Setup Chart .................................................................................................................................... 7 1.4 The Equipment List ................................................................................................................................ 8 1.5 Test Standards ....................................................................................................................................... 9 1.6 Reference Guidance .............................................................................................................................. 9 1.7 Deviation from Test Standard and Measurement Procedure ................................................................. 9 1.8 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION ..................................................................................................................... 10 2.1 Testing Facility ..................................................................................................................................... 10 2.2 The Worst Test Modes and Channel Details ....................................................................................... 10 3 TRANSMITTER TEST RESULTS ....................................................................................................... 11 3.1 6dB and Occupied Bandwidth .............................................................................................................. 11 3.2 Conducted Output Power ..................................................................................................................... 12 3.3 Power Spectral Density ........................................................................................................................ 13 3.4 Unwanted Emissions into Restricted Frequency Bands ...................................................................... 14 3.5 Emissions in Non-Restricted Frequency Bands ................................................................................... 16 3.6 AC Power Line Conducted Emissions ................................................................................................. 17 4 TEST LABORATORY INFORMATION ............................................................................................... 18 Appendix A. 6dB and Occupied Bandwidth Appendix B. Conducted Output Power Appendix C. Power Spectral Density Appendix D. Unwanted Emissions into Restricted Frequency Bands Appendix E. Emissions in Non-Restricted Frequency Bands Appendix F. AC Power Line Conducted Emissions Report No.: FR261601-04AC Page : 3 of 18 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR261601-04AC Rev. 01 Initial issue Mar. 07, 2023 Report No.: FR261601-04AC Page : 4 of 18 Report Version: Rev. 01 Summary of Test Results FCC Rules Test Items Measured Result 15.207 AC Power Line Conducted Emission [dBuV]: 0.150MHz 49.61(Margin -16.39dB) - QP Pass 15.247(d) 15.209 Unwanted Emissions [dBuV/m at 3m]: 41.64MHz 35.56 (Margin -4.44dB) - PK Pass 15.247(b)(3) Conducted Output Power Max Power [dBm]: 22.96 Pass 15.247(a)(2) 6dB Bandwidth Meet the requirement of limit Pass 15.247(e) Power Spectral Density Meet the requirement of limit Pass 15.203 Antenna Requirement Meet the requirement of limit Pass Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Report No.: FR261601-04AC Page : 5 of 18 Report Version: Rev. 01 1 General Description 1.1 Information 1.1.1 Specification of the Equipment under Test (EUT) RF General Information Frequency Range (MHz) IEEE Std. 802.11 Ch. Freq. (MHz) Channel Number Transmit Chains (N TX ) Data Rate / MCS 2400-2483.5 b 2412-2462 1-11 [11] 1 1-11 Mbps 2400-2483.5 g 2412-2462 1-11 [11] 1 6-54 Mbps 2400-2483.5 n (HT20) 2412-2462 1-11 [11] 1 MCS 0-7 Note 1: RF output power specifies that Maximum Conducted (Average) Output Power. Note 2: DSSS-DBPSK, DQPSK, CCK modulation OFDM - BPSK, QPSK, 16QAM, 64QAM modulation. 1.1.2 Antenna Details Ant. No. Brand Model Type Connector Gain (dBi) 1 BROADCOM BCM9Fractal64 PCB N/A 2.8 1.1.3 Power Supply Type of Equipment under Test (EUT) Power Supply Type 3.7Vdc from AC adapter Note: The above power supply…

Text truncated - open the document above for the full version.

Report No.: FR261601-04AE Page : 1 of 18 Report Version: Rev. 01 FCC Test Report FCC ID : XNAWBS08 Equipment : Withings Body Scan Model No. : WBS08 Brand Name : Withings Applicant : Withings Address : 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Standard : 47 CFR FCC Part 15.247 Received Date : Jan. 04, 2023 Tested Date : Jan. 11 ~ Jan. 16, 2023 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FR261601-04AE Page : 2 of 18 Report Version: Rev. 01 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Local Support Equipment List ................................................................................................................ 7 1.3 Test Setup Chart .................................................................................................................................... 7 1.4 Test Equipment List and Calibration Data .............................................................................................. 8 1.5 Test Standards ....................................................................................................................................... 9 1.6 Reference Guidance .............................................................................................................................. 9 1.7 Deviation from Test Standard and Measurement Procedure ................................................................. 9 1.8 Measurement Uncertainty ...................................................................................................................... 9 2 TEST CONFIGURATION ..................................................................................................................... 10 2.1 Testing Facility ..................................................................................................................................... 10 2.2 The Worst Test Modes and Channel Details ....................................................................................... 10 3 TRANSMITTER TEST RESULTS ....................................................................................................... 11 3.1 6dB and Occupied Bandwidth .............................................................................................................. 11 3.2 Conducted Output Power ..................................................................................................................... 12 3.3 Power Spectral Density ........................................................................................................................ 13 3.4 Unwanted Emissions in Restricted Frequency Bands ......................................................................... 14 3.5 Emissions in non-restricted Frequency Bands ..................................................................................... 16 3.6 AC Power Line Conducted Emissions ................................................................................................. 17 4 TEST LABORATORY INFORMATION ............................................................................................... 18 Appendix A. 6dB and Occupied Bandwidth Appendix B. Conducted Output Power Appendix C. Power Spectral Density Appendix D. Unwanted Emissions into Restricted Frequency Bands Appendix E. Emissions in Non-Restricted Frequency Bands Appendix F. AC Power Line Conducted Emissions Report No.: FR261601-04AE Page : 3 of 18 Report Version: Rev. 01 Release Record Report No. Version Description Issued Date FR261601-04AE Rev. 01 Initial issue Mar. 07, 2023 Report No.: FR261601-04AE Page : 4 of 18 Report Version: Rev. 01 Summary of Test Results FCC Rule…

Text truncated - open the document above for the full version.