XNAWBS13WITHINGS BODY COMP, WITHINGS BODY SMART

EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK EN-US WITHINGS PRODUCT GUIDE 2 EN-US This guide explains how to use your Withings Body Comp. EN – US REGIONS USER GUIDE Important notice Before using Withings Body Comp, review the informa- tion in this guide. You may also find this guide online at: https://www.withings.com/us/en/guides Retain this documentation for future reference. Installation instructions are available within the Quick Start Guide provided with this user guide. Please contact Withings when in need of assistance, setting up, using or maintaining the device or to report unexpected operations or events. Any serious incident related to the Withings Body Comp should be reported to Withings and competent authorities in your country of residence. Disclaimer Information in this guide may change without notice. WITHINGS, 2 rue Maurice Hartmann, 92130 Issy-les-Moulineaux, FRANCE 3 EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK EN-US Intended Use (US Regions) ! Warnings & safety notice - Self-diagnosis and self-treatment can be dangerous. Always consult your doctor in case of questions or doubts. - Do not use the device if you have a cardiac pacemaker, an implantable cardioverter-defibrillator (ICD), or other implanted electronic devices. - If you are pregnant, accuracy may be impacted for body composition analysis, electrodermal activity score, vascular age. Consult your doctor during pregnancy. - Misuse of the device can cause injury. - Do not step on the scale with wet feet. Potential allergic reactions may occur due to contact with materials used in the device. - The device is not intended to continuously monitor vital signs in critical conditions or where the nature of the variations is such that it could result in immediate danger to the user. - The device does not provide alarms. - Keep away from children and pets. Small parts may be inhaled or swallowed. - Exposing the device to prolonged lint, dust or light (including sunlight) may reduce its life or damage it. - Inspect electrodes for warping, surface damage or corrosion and check for any other form of damage. - Do not use the device if it is damaged. Use of a damaged device could cause injury or equipment failure. - Do not submerge the scale or any of the components in water. - Do not try to repair or modify this equipment yourself. No service or repairs should be performed on the device other than the maintenance listed in this guide. - Do not use accessories, detachable parts, or materials not described in the product guide. - Avoid using the device on feet with poor skin integrity, such as cuts, wounds or damaged skin. - No modification of this equipment is allowed. Withings Body Comp is a connected smart scale providing the following wellness features: - measure weight - calculate Body Mass Index (BMI) - measure pulse rate - estimate vascular age - compute electrodermal activity score Additionally, Withings Body Comp is intended: to measure body composition for weight management purposes, and to maintain healthy levels of muscle, bone and fat mass, and encourage healthy living. It is intended for use in adults. 4 EN-US - Follow the information in the Quick Start Guide and in the Withings application to set-up your device. - To wake up your device for the first time, please pull the tab in the battery cover. If there is no tab, press the power button for 3 seconds if needed. Once your product is installed and configured, it will appear in your Devices list in settings. - To take the first measurement, step on the scale with bare feet. Your name, or trigram (as configured in the Withings application), will appear on the scale’s screen at the end of the weight measurement: it means your scale has correctly identified you and the measurements sequence (as defined in the Withings application) will follow. - If it is not the case, the measurement will most likely appear in “Unknown Measurements” in the Withings application. Please assign it to your user so that the scale can automatically recognize the user during the next weigh-in. How to use Withings Body Comp and take a first measurement Warnings & safety notice - Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper operation. - Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the device, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result. - Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. - Do not interconnect this equipment with other equipment not described in the product guide. - Follow operational and storage conditions as described in the technical specifications section of this guide. Otherwise, measurement results may be impacted. 5 EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK EN-US Troubleshooting — Withings Body Comp If you cannot fix the problem using the following troubleshooting instructions, please contact Withings or go to: withings.com/support ProblemsSolutions Scale does not wake up when I step on it. - Make sure your Withings Body Comp has functional alkaline cells. Change them if necessary. I’m having syncing issues with my scale. - Make sure that your Withings Body Comp appears in Devices in the Health Mate App. If not, please install it. - Make sure your Withings Body Comp has functional alkaline batteries. Change the batteries if necessary. - If your Withings Body Comp is configured with Wi-Fi, make sure your router is plugged in, that your Wi-Fi is operational, and…

Text truncated - open the document above for the full version.

EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK 101 Withings Body Comp es una báscula inteligente conectada que proporciona las siguientes funciones sin fines médicos: - medición del peso - cálculo del índice de masa corporal (IMC) - medición de la composición corporal - medición de la frecuencia de pulso - medición de la velocidad de la onda de pulso - estimación de la edad vascular Además, el dispositivo Withings Boody Comp está destinado a detectar y hacer un seguimiento de las neuropatías autonómi- cas periféricas en una población adulta mediante la realización de mediciones en los pies, tanto si tienen la piel intacta o presen- tan la piel dañada y tienen, por ejemplo, ampollas, callosidades o heridas. No use el dispositivo si tiene implantado un marcapasos cardía- co, un desfibrilador cardioversor implantable (ICD, por sus siglas en inglés) u otro dispositivo electrónico. - El autodiagnóstico y el autotratamiento pueden ser peligrosos. En caso de duda o pregunta, consulte con su médico. - Si está embarazada, la precisión puede verse afectada por el análisis de la composición corporal, la puntuación del sistema nervioso autónomo y la edad vascular. Consulte a su médico durante el embarazo. - El uso inapropiado del dispositivo puede causar lesiones. - No suba a la báscula con los pies mojados. Pueden producir- se reacciones alérgicas debido al contacto con los materiales utilizados en el dispositivo. - El dispositivo no está diseñado para controlar continuamente las constantes vitales en situaciones críticas o cuando la natura- leza de las variaciones sea tal que pueda resultar en un peligro inmediato para el usuario. - El dispositivo no emite ningún tipo de alarma. - Mantenga el dispositivo fuera del alcance de los niños y las mascotas. Los componentes pequeños pueden ser inhalados o ingeridos. - La exposición prolongada del dispositivo a pelusas, polvo o fuentes de luz (incluida la luz solar) puede reducir su vida útil o provocar daños en el mismo. - Inspeccione los electrodos para detectar posibles deformacio- nes, daños superficiales o signos de corrosión, y compruebe si presenta alguna otra forma de daño. - No utilizar el dispositivo si está dañado. El uso de un dispositivo dañado podría causar lesiones o fallos de funcionamiento. - No sumerja la báscula ni ninguno de sus componentes en agua. - No intente reparar o modificar el dispositivo por sus propios medios. Absténgase de realizar cualquier servicio o reparación en el dispositivo que no sea el mantenimiento indicado en esta guía. - No use accesorios, piezas desmontables o materiales no especifi- cados en la guía del producto. - Evite utilizar el dispositivo en pies con cortes, heridas o piel dañada. ! Advertencias y aviso de seguridad Contraindicaciones Uso previsto (Regiones Europa) EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK 102 ! Advertencias y aviso de seguridad - El uso de accesorios, transductores y cables distintos a los especificados o proporcionados por el fabricante de este equipo podría aumentar las emisiones electromagnéticas o disminuir la inmunidad electromagnética de este equipo, lo cual podría provo- car fallos en su funcionamiento. - Los equipos de comunicaciones por RF portátiles (incluidos los periféricos, como los cables de antena y antenas externas) no deben utilizarse a menos de 30 cm (12 pulgadas) de ninguna parte del dispositivo, incluidos los cables especificados por el fabricante. De lo contrario, se podría producir una degradación del rendimiento de este equipo. - Evite el uso de este equipo sobre, bajo o de forma adyacente a otros equipos, ya que esto podría provocar fallos en su fun- cionamiento. En caso de que dicho uso sea necesario, examine este dispositivo y los demás equipos para asegurarse de que funcionan correctamente. - No interconecte este dispositivo con otros equipos no especifi- cados en la guía del producto. - Siga las instrucciones operativas y de almacenamiento descritas en la sección de especificaciones técnicas de esta guía. No hacer- lo podría afectar los resultados de la medición. - No se permite realizar ninguna modificación en este equipo. - El uso de medicamentos con agentes anticolinérgicos puede afectar los resultados de la puntuación de la salud neurológica. En caso de no estar seguro/a de si los medicamentos que toma tienen o no propiedades anticolinérgicas, consulte a su médico. - Consumir bebidas alcohólicas durante las 24 horas antes de realizar una medición puede afectar los resultados de la puntuación de la salud neurológica. - Los resultados de la medición pueden verse afectados en caso de amputación de las extremidades inferiores. - Para configurar su dispositivo, siga las instrucciones indicadas en la Guía de inicio rápido y la aplicación Withings. - Para poner en marcha el dispositivo por primera vez, tire de la lengüeta insertada en la tapa de las pilas. Si no hay lengüeta, pulse el botón de encendido durante 3 segundos si es necesario. Una vez que el producto esté instalado y configurado, aparecerá en la lista Dispositivos de su menú de configuración. - Para realizar la primera medición, suba a la báscula con los pies descalzos. Su nombre o trigrama (según lo haya configurado previamente en la aplicación Withings) aparecerá en la pantalla de la báscula al final de la medición de peso; esto significa que su báscula le ha identificado correctamente y que se procederá a las mediciones siguiendo la secuencia previamente definida en la aplicación Withings. - Si no es así, lo más probable es que la medición aparezca en la sección de «Mediciones desconocidas» de la aplicación. Asigne dicha medición a su usuario para que la báscula pueda reconocerle automáticamente durante el próximo pesaje. Cómo usar Withings Body Comp y realizar la primera medición EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK 103 Cómo Withings Body Comp obtiene una puntuación de la salud neurológica - La puntuación de la salud neurológica se basa en una evaluación de la respuesta galvánica de la pie…

Text truncated - open the document above for the full version.

EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK EN-US WITHINGS PRODUCT GUIDE 2 EN-US Important notice Before using Withings Body Smart, review the information in this guide. You may also find this guide online at: https://www.withings.com/us/en/guides Retain this documentation for future reference. Installation instructions are available within the Quick Start Guide provided with this user guide. Please contact Withings when in need of assistance, setting up, using or maintaining the device or to report unexpected operations or events. Any serious incident related to the Withings Body Smart should be reported to Withings and competent authorities in your country of residence. Disclaimer Information in this guide may change without notice. Intended Use (U.S. Regions) ! Warnings & safety notice Withings Body Smart is a connected smart scale providing the following wellness features: - measure weight - calculate Body Mass Index (BMI) - measure pulse rate - estimate vascular age - compute electrodermal activity score Additionally, Withings Body Smart is intended: to measure body composition for weight management purposes, and to maintain healthy levels of muscle, bone and fat mass, and encourage healthy living. It is intended for use in adults. - Self-diagnosis and self-treatment can be dangerous. Always consult your doctor in case of questions or doubts. - Do not use the device if you have a cardiac pacemaker, an implantable cardioverter-defibrillator (ICD), or other implanted electronic devices. - Misuse of the device can cause injury. - Do not step on the scale with wet feet. Potential allergic reactions may occur due to contact with materials used in the device. This guide explains how to use your Withings Body Smart. It applies to users in the United States of America. EN – U.S. REGIONS USER GUIDE WITHINGS, 2 rue Maurice Hartmann, 92130 Issy-les-Moulineaux, FRANCE 1282 3 EN FR DE SV NL FI DA IT ES CS PL PT RO HU SK EN-US - The device is not intended to continuously monitor vital signs in critical conditions or where the nature of the variations is such that it could result in immediate danger to the user. - The device does not provide alarms. - Keep away from children and pets. Small parts may be inhaled or swallowed. - Exposing the device to prolonged lint, dust or light (including sunlight) may reduce its life or damage it. - Inspect electrodes for warping, surface damage or corrosion and check for any other form of damage. - Do not use the device if it is damaged. Use of a damaged device could cause injury or equipment failure. - Do not submerge the scale or any of the components in water. - Do not try to repair or modify this equipment yourself. No service or repairs should be performed on the device other than the maintenance listed in this guide. - Do not use accessories, detachable parts, or materials not described in the product guide. - No modification of this equipment is allowed. - Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper operation. - Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the device, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result. - Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. - Do not interconnect this equipment with other equipment not described in the product guide. - Follow operational and storage conditions as described in the technical specifications section of this guide. Otherwise, measurement results may be impacted. ! Warnings & safety notice - Follow the information in the Quick Start Guide and in the Withings application to set-up your device. - To wake up your device for the first time, please pull the tab in the battery cover. If there is no tab, press the power button for 3 seconds if needed. Once your product is installed and configured, it will appear in your Devices list in settings. - To take the first measurement, step on the scale with bare feet. Your name, or trigram (as configured in the Withings application), will appear on the scale’s screen at the end of the weight measurement: it means your scale has correctly identified you and the measurements sequence (as defined in the Withings application) will follow. - If it is not the case, the measurement will most likely appear in “Unknown Measurements” in the Withings application. Please assign it to your user so that the scale can automatically recognize the user during the next weigh-in. How to use Withings Body Smart and take a first measurement 4 EN-US Troubleshooting — Withings Body Smart If you cannot fix the problem using the following troubleshooting instructions, please contact Withings or go to: withings.com/support ProblemsSolutions Scale does not wake up when I step on it. - Make sure your Withings Body Smart has functional alkaline cells. Change them if necessary. I’m having syncing issues with my scale. - Make sure that your Withings Body Smart appears in Devices in the Withings application. If not, please install it. - Make sure your Withings Body Smart has functional alkaline batteries. Change the batteries if necessary. - If your Withings Body Smart is configured with Wi-Fi, make sure your router is plugged in, that your Wi-Fi is operational, and that the scale is in range of your router. - If necessary, reboot your scale by removing a battery. - If necessary, reboot your mobile phone. I want to change the units of my scale (lb, kg, st lb).- Press the button located on the b…

Text truncated - open the document above for the full version.

LETTER HEAD Date: January 17, 2023 Subject: Ad Hoc Mode Function Declaration FCC ID: XNAWBS13 To Whom it may concern, We, Withings declare that the device does not support any non-US channels and country code selection and Channel 12 and 13 in 2.4 GHz band in all the operational mode(s). Regards, -------------------------------------------------------------------------------------- Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

(Insert company letter head) Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: March 14, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Withings certifies that the equipment [FCC ID: XNAWBS13] for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Withings certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Sincerely, ------------------------------------------------------------------------------------ Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

Withings Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Withings and XNA certifies that, as of the date of the filing of application, Withings Inc is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address and email for the designated agent are: Physical U.S. address: Withings Inc 225 Franklin St, Ste 1250 Boston, MA US 02110 Email: [email protected] FRN: 0033495748 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Xavier Debreuil Name: Paul Buckley Title: Product Director Title: Sales & Marketing Director Email: [email protected] Email: [email protected] Date:2023-03-14 Date:2023-03-14

Date: 2023/3/14 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: XNAWBS13 Product name: WITHINGS BODY COMP; WITHINGS BODY SMART To whom it may concern: We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model WBS12; WBS13 to the FCC Rules and Regulations. International Certification Corp. Address : No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name : Gary Chang Job Title : Manager e-mail : [email protected] Webs We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. -------------------------------------------------------------------------------------- Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

Date: January 17, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: XNAWBS13 To whom it may concern: Short-term confidentiality Pursuant to DA 04-1705 of the Commission’s pubic notice, in order to comply with the marketing regulations in 47CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180 days from the day of the grant. ☒ Internal Photographs ☒ External Photographs ☒ User's manual ☒ Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: ☒ Block Diagram ☒ Schematics ☒ Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. ------------------------------------------------------------------------------------ Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

To Whom It May Concern: This letter is to certify that the following Withings product: Brand name and model type of the specified radio equipment: Withings / WBS12; WBS13 FCC ID: XNAWBS13 Product name: WITHINGS BODY COMP ; WITHINGS BODY SMART Exhibits the following behaviors: - The scale connects to webservice server through Wi-Fi one time everyday. - Wi-Fi and Bluetooth communication never occurs while weight is being measured. The device can detect the presence of the user thanks to its weight sensors (load cells). If someone is stepping on the scale it will not transmit by WiFi or BLE. - Wi-Fi or Bluetooth communication is started after user was weighted. -------------------------------------------------------------------------------------- Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

LETTER HEAD Product Equality declaration Letter We, Withings declare that difference between FCC ID: XNAWBS13 / XNAWBS12 are as below. Minor change of non-RF function as below 1. Adding filter capacitor to improve performance of RS. 2. Optimize position of switching power supply components to improve efficiency. 3. Change LCD panel and remove relative unnecessary components. Change of Bluetooth/Wifi function as below 1. Change RF impedance adaptation components for Bluetooth but characteristic is same while improving efficiency. 2. Layout is modified to improve grounding and reduce harmonic noise of Bluetooth carrier wave. This allows the use of higher Bluetooth output power. 3. WiFi layout improvements. Improved ground plane connections, removed traces from L2 & L3 from under transceiver, moved to L6 to improve EMI performance and reduce noise on RF transmit and receive signals. There is no change in output power. Size of PCBA is not change -------------------------------------------------------------------------------------- Withings 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Xavier Debreuil / Product Director [email protected] +33608979794

Project No.: EP280405-02 Page No. : 1 of 13 Photographs of EUT Model: WBS12 (Black) Project No.: EP280405-02 Page No. : 2 of 13 Model: WBS 13 (Black) Project No.: EP280405-02 Page No. : 3 of 13 Model: WBS12 (White) Project No.: EP280405-02 Page No. : 4 of 13 Model: WBS13 (White)

Project No.: EP280405-02 Page No. : 5 of 13 Project No.: EP280405-02 Page No. : 6 of 13 Project No.: EP280405-02 Page No. : 7 of 13 Project No.: EP280405-02 Page No. : 8 of 13 Project No.: EP280405-02 Page No. : 9 of 13 Project No.: EP280405-02 Page No. : 10 of 13 Project No.: EP280405-02 Page No. : 11 of 13 Project No.: EP280405-02 Page No. : 12 of 13 Project No.: EP280405-02 Page No. : 13 of 13

Report No.: FA280405-02 Page : 1 of 7 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. FCC RF Exposure Exemption Report FCC ID : XNAWBS13 Equipment : WITHINGS BODY COMP, WITHINGS BODY SMART (Refer to item 1.1.1 for more details) Model No. : WBS12, WBS13 (Refer to item 1.1.1 for more details) Brand Name : Withings Applicant : Withings Address : 2 rue Maurice Hartmann 92130 Issy-Les-Moulineaux France Standard : 47 CFR FCC Part 2.1091 Received Date : Dec. 21, 2022 Tested Date : Dec. 26 ~ Dec. 30, 2022 We, International Certification Corporation, would like to declare that the tested sample has been evaluated and in compliance with the requirement of the above standards. The test results contained in this report refer exclusively to the product. It shall not be reproduced except in full without the written approval of our laboratory. Reviewed by: Approved by: Along Chen / Assistant Manager Gary Chang / Manager Report No.: FA280405-02 Page : 2 of 7 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. Table of Contents 1 RF EXPOSURE TEST EXEMPTIONS ................................................................................................... 4 1.1 1-mW TEST EXEMPTION ..................................................................................................................... 5 1.2 SAR-BASED EXEMPTION .................................................................................................................... 5 1.3 MPE-BASED EXEMPTION .................................................................................................................... 5 1.4 DEVIATION FROM TEST STANDARD AND MEASUREMENT PROCEDURE ................................... 6 1.5 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 1.6 EXEMPTION CALCULATION ................................................................................................................ 6 2 TEST LABORATORY INFORMATION ................................................................................................. 7 Report No.: FA280405-02 Page : 3 of 7 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. Release Record Report No. Version Description Issued Date FA280405-02 Rev. 01 Initial issue Mar. 13, 2023 FA280405-02 Rev. 02 Re-evaluation since maximum tune up limit is modified. Mar. 30, 2023 Report No.: FA280405-02 Page : 4 of 7 Report Version: Rev. 02 The previous version of the test report has been cancelled and replaced by new version. 1 General Description 1.1 Information 1.1.1 Product Details The following models are provided to this EUT. Brand Name Model Name Product Name Description Withings WBS12 WITHINGS BODY COMP Glass design change Withings WBS13 WITHINGS BODY SMART  The above models, model WBS12 was selected as a representative one for the final test and only its data was recorded in this report. Report No.: FA280405-02 Page : 5 of 7 Report Version: Rev. 02 The previous version of the test report has been can…

Text truncated - open the document above for the full version.