XNI-ID2535125351 DSP Amplifier

1 taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20 Taylor Made ® Wavemaker Stereo Installation and Owner’s Manual (For Aftermarket Applications) CCD-0003867 Table of Contents Introduction ............................................ 1 Safety ................................................... 2 Parts List ................................................ 2 Resources Required ................................... 2 Installation .............................................. 3 Operation - PC .......................................... 4 Current Settings ....................................... 5 Operation - Android & iOS ............................. 7 Time Delay ............................................ 8 Input Configuration .................................... 8 Wiring Diagrams ..................................... 10 Amplifier ............................................. 10 Bridge Mode ......................................... 10 Stereo Mode ......................................... 11 Taylor Made ® Wavemaker Amplifier Installation and Owner’s Manual (For Aftermarket Applications) Introduction The Taylor Made ® Wavemaker amplifier is a 360 watt, four channel class D fully-integrated amplifier with 31 bands of equalization. The Wavemaker can be controlled, tuned and streamed from the available phone app. When coupled with Taylor Made Exciter speakers, the Wavemaker can turn the glass into speakers for an immersive listening experience. Additional information about this product can be obtained from lci1.com/support or by using the myLCI app. Replacement kits can be ordered from https://store.lci1. com/ or by using the myLCI app. The myLCI app is available for free on iTunes ® for iPhone ® and iPad ® and also on Google Play ™ for Android ™ users. iTune s ® , iPhone ® , and iPad ® are registered trademarks of Apple Inc. Google Play ™ and Android ™ are trademarks of Google Inc. Wavemaker AmplifierWavemaker Amplifier PNPNDescriptionDescription 811752Wavemaker Amplifier 2 taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20 Taylor Made ® Wavemaker Stereo Installation and Owner’s Manual (For Aftermarket Applications) CCD-0003867 LetterLetterPNPNDescriptionDescriptionQtyQty A811752Wavemaker Amplifier1 Parts List Resources Required • Cordless or electric drill with Phillips and drill bits • Wire stripper and crimper NOTE: Part numbers are shown for identification purposes only. Not all parts are available for individual sale. All parts with a link to the Lippert Store can be purchased. Safety Read and fully understand all instructions before installing or operating this product. Adhere to all safety labels. This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This manual cannot begin to plot out instructions for every possibility, but provides the general instructions, as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the provided instructions may result in death, serious personal injury, severe product and/or property damage, including voiding of the LCI limited warranty. THE “WARNING” SYMBOL ABOVE IS A SIGN THAT AN INSTALLATION PROCEDURE HAS A SAFETY RISK INVOLVED AND MAY CAUSE DEATH OR SERIOUS PERSONAL INJURY, SEVERE PRODUCT OR PROPERTY DAMAGE IF NOT PERFORMED SAFELY AND WITHIN THE PARAMETERS SET FORTH IN THIS MANUAL. THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT AN INSTALLATION PROCEDURE HAS A SAFETY RISK INVOLVED AND MAY CAUSE PERSONAL INJURY OR PRODUCT DAMAGE IF NOT PERFORMED SAFELY AND WITHIN THE PARAMETERS SET FORTH IN THIS MANUAL. A 3 taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20 Taylor Made ® Wavemaker Stereo Installation and Owner’s Manual (For Aftermarket Applications) CCD-0003867 Installation 1. Select a location to mount the Wavemaker amplifier. It should be mounted to a flat, solid location that is in close proximity to the power source. NOTE: Do not mount near heat sources and make sure there is sufficient air flow around the unit. 2. Mount the amplifier using supplied screws (Fig.1). Pre-drilling holes is recommended. Fig.1 3. Connect the speaker wires from installed Exciters to the amplifier (Fig.2) according to the wiring diagrams on the next two pages. NOTE: See Exciter Speaker Aftermarket Document CCD- 0003867 for Exciter installation instructions. Inside View Outside View Fig.2 4 taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20 Taylor Made ® Wavemaker Stereo Installation and Owner’s Manual (For Aftermarket Applications) CCD-0003867 Operation - PC The Wavemaker system is operated by an app available at taylormadeproducts.com/wavemaker. 1. Download and install the app on a PC. 2. Apply power to the amplifier. 3. Go to the Wi-Fi settings on the PC. 4. Connect to the TM_FX_DSP network to get to the DSP Audio Adjustment System Screen (Fig.3). See pages 5 and 6 for more information on adjusting these features. Fig.3 Fig.4 Delay Delay for all channels can be adjusted in a range from 0 to 12.5 in Time (ms) or Distance (mm) (Fig.4). 5 taylormadeproducts.com/wavemaker 574-537-8900 Rev:06.11.20 Taylor Made ® Wavemaker Stereo Installation and Owner’s Manual (For Aftermarket Applications) CCD-0003867 Master Volume Control The master volume can be adjusted from 0 to -59dB (Fig.5). Equalizer Reset Buttons • Reset All - Restores default settings (Fig. 6A). • Reset EQ - Sets the gain to 0 and the Q and Hz to default (Fig. 6B). • PEQ Parameter or Graphic Equalizer - In graphic mode, the Q or Hz cannot be adjusted (Fig. 6C). • Reset Gain - Will set all 31 gains to 0 (Fig.6D). Fig.5 Fig.6 AC B D Crossover Configuration Choose between Butterworth or Bessel filter type (Fig. 8A). Select the appropriate frequencies (Fig. 8B) and slopes for each speaker (Fig. 8C). Fig.7 A B C WHEN USING EXCITERS, IT IS RECOMMENDED THAT THE HIGH PASS FREQUENCY BE SET TO 80Hz…

Text truncated - open the document above for the full version.

Date: 2019-11-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation Letter To Whom It May Concern, The chip QCC3005 installed in our product 25351 DSP Amplifier (model name: 25351-A , FCC ID: XNI-ID25351 ), which are supports Bluetooth5.0 dual mode . But for the product, it only activates BLE 1M and BDR/EDR mode, the BLE 2M mode is disabled by using the software. Please contact me if there is need for an y additional clarification or information. Company: Lippert Components Add: 6801 15 Mile Road, Sterling Heights, Michigan United States 48312 Tel: (248)278-0276 Fax: (248 )583-0527 E-mail: [email protected] Sincerely Yours, Signature: Typed or Printed Name: Michael Rymut Title: Hardware Engineer

F C C A u t h o rization Date: 2019-11-26 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Lippert Components, the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Company: Lippert Components Add: 6801 15 Mile Road, Sterling Heights, Michigan United States 48312 Tel: (248)278-0276 Fax: (248)583-0527 E-mail: [email protected] Sincerely Yours, Signature: Typed or Printed Name: Michael Rymut Title: Hardware Engineer This authorization is valid until further written notice from the applicant.

FCC Co nfidentia l Authori z ation Date: 2019-11-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: XNI-ID25351 To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Lippert Components hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Company: Lippert Components Add: 6801 15 Mile Road, Sterling Heights, Michigan United States 48312 Tel: (248)278-0276 Fax: (248)583-0527 E-mail: [email protected] Signature: Typed or Printed Name: Michael Rymut Title: Hardware Engineer

EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS BT&BLE Module Wi-Fi Module BT&BLE Antenna Wi-Fi Antenna BT&BLE Antenna Port Wi-Fi Antenna Port

EXHIBIT C - TEST SETUP PHOTOGRAPHS Conducted Emissions (Front View) Conducted Emissions (Side View) Radiated Emissions (Below 1GHz) Radiated Emissions (Above 1GHz)