XQW-MUMPR5833Guitar Headphone Amplifier

NOTES: UNLESS OTHERWISE SPECIFIED. 1.PRINT IN BLACK OR GRAYSCALE ONLY; SINGLE COLOR WITH SCREENS, BOTH SIDES 2.24LB BOND PAPER 3.MATTE FINISH 4.PANEL SIZE: 140MM WIDE X 140MM HIGH 5.SAMPLES OF FIRST PARTS MUST BE APPROVED BY FENDER R&D BEFORE STARTING PRODUCTION.QTY 3 UNLESS OTHERWISE SPECIFIED. DO NOT PRINT THIS PAGE REVISIONS REV.DESCRIPTIONBYDATE A PART NUMBERSIZE PRODUCT MANAGER TITLE REV DATE PROJECT ENGINEER FENDER MUSICAL INSTRUMENTS CORP. RESEARCH & DEVELOPMENT CORONA, CALIFORNIA U.S.A. THIS DOCUMENT CONTAINS INFORMATION OF PROPRIETARY NATURE TO FENDER MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM FENDER MUSICAL INSTRUMENTS ANY PART SUPPLIED FOR USE IN ANY FENDER PRODUCT MUST CONFORM TO THE EUROPEAN RoHS DIRECTIVE. COPYRIGHT -6/12/2020 - FENDER MUSICAL INSTRUMENTS CORP. TITLEBLOCK REVISION: 2.1 DATE PROJECT MANAGERDATE A J.O. 6.12.20 A 7720283000 MUSTANG MICRO SAFETY MANUAL MUSTANG MICRO SAFETY MANUAL OUTSIDE FACE shown FRONT COVER BACK COVER INSIDE OUTSIDE 140.00 557.00 557.00 140.00 140.00139.50 139.50139.00 139.00 138.50 138.50 140.00 Ce symbole avertit l'utilisateur de la présence d’une tension dangereuse non isolée dans le boîtier du produit, qui peut être susamment importante pour constituer un risque d'électrocution. Le symbole du point d’exclamation dans un triangle équilatéral avertit l’utilisateur de la présence d’instructions importantes relatives au fonctionnement et à l'entretien dans la documentation qui accompagne le produit. 1) Lisez ces instructions. 2) Conservez ces instructions. 3) Respectez toutes les mises en garde. 4) Suivez toutes les instructions. 5) N’utilisez pas cet appareil à proximité d’un point d’eau. 6) Nettoyez-le uniquement avec un chion sec. 7) Ne bloquez pas les ouvertures de ventilation. Installez l'appareil en suivant les instructions du fabricant. 8) Ne l’installez pas à proximité d’une source de chaleur, comme un radiateur, un four ou tout autre appareil (incluant les amplicateurs) produisant de la chaleur. 9) Utilisez uniquement les pièces/accessoires spéciés par le fabricant. 10) Déconnectez l’appareil pendant les orages ou les longues périodes d'inutilisation. 11) Conez toutes les réparations à un technicien qualié. Vous devez faire contrôler cet appareil s'il a été endommagé de quelque façon que ce soit, comme lorsque le cordon secteur ou les ches sont endommagés, qu'un liquide ou des objets se sont inltrés dans l’appareil, qu'il a été exposé à la pluie ou l’humidité, qu'il a subi un choc ou qu'il ne fonctionne pas normalement. 12) MISE EN GARDE – Pour réduire les risques d’incendie ou d'électrocution, n’exposez pas cet appareil aux intempéries ou à l'humidité. 13) AVIS DE CONFORMITÉ AUX NORMES DE LA COMMISSION FÉDÉRALE SUR LES COMMUNICATIONS – Cet appareil a été testé et répond aux nomes de la Commission Fédérale Américaine sur les Communications dans la catégorie des équipements numériques de Classe B, alinéa 15 des normes FCC. Ces normes ont été conçues pour orir une protection raisonnable contre les interférences en environnement résidentiel. Cet équipement génère utilise et peut émettre des fréquences radio. S’il n’est pas utilisé selon les indications de ce mode d’emploi, il peut générer des interférences néfastes aux communications radio. Il n’existe aucune garantie contre l’apparition de ces interférences, qu’elle que soit l’installation. Si cet appareil génère des interférences néfastes aux réceptions radio ou télévision (ce qui peut être aisément déterminé en plaçant l’appareil sous/hors tension), l’utilisateur se doit d’essayer de corriger ces interférences par l’un des moyens suivants : ré-orientez ou déplacez l’antenne de réception, éloignez l’appareil du récepteur, connectez l’appareil sur une ligne secteur diérente de celle du récepteur. Consultez votre revendeur ou un technicien radio/TV qualié si vous avez besoin d’aide pour combattre les interférences. REMARQUE : La société FMIC n’est pas responsable des modications non-autorisées apportées à cet équipement et qui pourraient annuler sa conformité aux normes FCC, et / ou annuler sa conformité aux normes de sécurité. Pour certains dispositifs produisant des rayonnements intentionnels : Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 14) MISE EN GARDE – Pour éviter d'endommager les produits munis de piles internes ou externes : • Les piles et/ou le produit dans lequel elles sont installées ne doivent pas être exposés à une chaleur excessive, comme les rayons du soleil, le feu, etc. • Il y a un risque d’explosion lorsque la pile n’est pas correctement connectée/remplacée. Remplacez-la uniquement par une pile de type identique ou équivalent, spécié dans les instructions ou sur le produit. 15) Cet equipement est conforme aux limites d’exposition aux rayonnements IC RSS-102 etablies pour un environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 16) ATTENTION - Pour maintenir la sécurité des produits, les produits avec des batteries internes ou externes (batterie): • Les batteries et / ou le produit dans lequel elles sont installées, ne doivent pas être jetés dans le feu ou dans un four chaud, ou écrasés ou coupés mécaniquement, ce qui peut entraîner une explosion. 17) ATTENTION - Pour maintenir les produits de sécurité des produits avec des batteries internes ou externes (batterie): • Les batteries et / ou le produit dans lequel elles sont installées ne doivent pas être laissés dans un environnement à très haute température qui peut entraîner …

Text truncated - open the document above for the full version.

DO NOT PRINT THIS PAGE REVISIONS REV.DESCRIPTIONBYDATE A PART NUMBERSIZE PRODUCT MANAGER TITLE REV DATE PROJECT ENGINEER FENDER MUSICAL INSTRUMENTS CORP. RESEARCH & DEVELOPMENT CORONA, CALIFORNIA U.S.A. THIS DOCUMENT CONTAINS INFORMATION OF PROPRIETARY NATURE TO FENDER MUSICAL INSTRUMENTS AND IS SUBMITTED TO YOU IN CONFIDENCE AND SHALL NOT BE DISCLOSED OR TRANSMITTED TO OTHERS WITHOUT AUTHORIZATION FROM FENDER MUSICAL INSTRUMENTS ANY PART SUPPLIED FOR USE IN ANY FENDER PRODUCT MUST CONFORM TO THE EUROPEAN RoHS DIRECTIVE. COPYRIGHT -8/29/2018 - FENDER MUSICAL INSTRUMENTS CORP. TITLEBLOCK REVISION: 2.1 DATE PROJECT MANAGERDATE OWNER’S MANUAL INTRODUCTION This manual is a guide to the features and functions of Mustang Micro—a plug-and-play headphone amplifi- er and interface that connects directly to your guitar and bass to deliver amp models, effects models, Blue- tooth capability and more. With fantastic Fender Mustang amplifier sound and yet no larger than a deck of cards, Mustang Micro is easily portable and provides up to six hours of battery-operated playing time. Mustang Micro is simple and intuitive. Plug into any popular instrument model using the rotating 1/4” jack. Choose an amp. Choose an effect and effect level. Set volume and tone controls. Turn Bluetooth on and stream music to play along with. Mustang Micro delivers it all straight to your earbuds, headphones or digi- tal recording software. 1 FEATURES A. ROTATING INPUT PLUG: Standard 1/4” plug rotates up to 270 degrees for easy compatibility with all popular guitar models. B. MASTER VOLUME: Thumbwheel control adjusts overall output level to headphones/earbuds or recording- software (page 6). C. AMP BUTTONS/LED: Buttons (+/-) select amplifier from 12 models (page 3). LED color indicates amp model in use. D. TONE BUTTONS/LED: Buttons (+/-) adjust tone (page 6); selections include flat setting, two progressively darker settings and two progressively brighter settings. Tone control is post-amplifier. LED color indicates tone setting in use. E. FX BUTTONS/LED: Buttons (+/-) select effect (or effects combination) from 12 different options (page 5). LED color indicates effect model in use. F. FX LEVEL BUTTONS/LED: Buttons (+/-) increase or decrease mix level of one particular parameter of the se- lected effect (page 6). LED color indicates effect level in use. G. POWER/BLUETOOTH SWITCH/LED: Three-position slider switch turns Mustang Micro on and off and acti- vates Bluetooth (page 7). LED indicates power/Bluetooth/charging status. H. USB-C JACK: For charging, recording output and firmware updates. I. HEADPHONE OUTPUT: Stereo headphone jack. 2 3 CONNECTING TO A GUITAR AND POWERING UP Connecting Mustang Micro to your guitar couldn’t be easier—simply rotate the 1/4” INPUT PLUG (A) out from the unit, and plug it into the guitar’s input jack. (image of MM plugged into a guitar) Slide the POWER SWITCH (G) to the center “on” position. POWER LED will illuminate green for 10 seconds and then extinguish, indicating that Mustang Micro is on and charged (different LED colors indicate different charging status; see “Charging,” page 7). You’re now ready to choose an amp, choose an effect and effect level, adjust volume and tone, engage Bluetooth if so desired, and start playing. SELECTING AN AMPLIFIER MODEL Mustang Micro has 12 different amplifier models to choose among, encompassing “clean,” “crunch” and “high-gain” types. To choose an amp model, press the +/- AMP BUTTONS (D) on the side of the unit. AMP LED color indicates amp model in use; LED will illuminate for 10 seconds and then extinguish until any button is pressed. Amplifier types, models and LED colors are: All non-FMIC product names and trademarks appearing in this manual are the property of their respective owners and are used solely to identify the products whose tones and sounds were studied during sound model development for this product. The use of these products and trademarks does not imply any affiliation, connection, sponsor- ship, or approval between FMIC and with or by any third party. AMP TYPELED COLORAMP NAMEAMP DESCRIPTION CLEAN CyanStudio Preamp Direct-to-mixing-desk studio-preamp purity with clean, uncolored tonal response. Red’65 Twin + Compressor Based on the 1965 Fender Twin Reverb®—an indispensable mid-’60s clean-tone favorite—with a medium compression setting. Green’65 Deluxe Highly popular mid-’60s Fender with great tone, cranked in countless clubs. Blue’57 Twin Based on a 1957 Twin—an original-era 2x12” Fender tweed classic prized for clean-to-dirty versatility. Yellow’60s British Inspired by the Vox AC30, which powered the British Invasion and produced remarkable clean and dirty tone. CRUNCH Magenta’65 Deluxe + Greenbox OD Same as ’65 Deluxe above, with Greenbox overdrive based on the Ibanez TS808 Tube Screamer. Turquoise’70s British Inspired by a late-’60s/early-’70s Marshall Super Lead, the amp that powered the dawn of hard rock. Orange’90s American Based on the Mesa Dual Rectifer, which featured distinctive distor- tion that shaped the “nu-metal” sound. HIGH-GAIN RaspberryBB15 High Gain Based on the high-gain structure setting of the Fender Bassbreaker 15. Spring GreenFBE-100 Inspired by both lead channels — BE and HBE — of the Friedman BE-100. VioletMetal 2000Modern high-gain scorch based on the EVH® 5150 III . WhiteUber Ideal for heavy, aggressive music; inspired by the super-high-gain lead channel of the Bogner Uberschall head. 4 Also when selecting an amplifier model, note that each one is automatically paired with a cabinet simulation model (“CAB SIM”). These are: All non-FMIC product names and trademarks appearing in this manual are the property of their respective owners and are used solely to identify the products whose tones and sounds were studied during sound model development for this product. The use of these products and trademarks does not imply any affiliation, connection, sponsor- ship, or approval between FMIC and with or by any third part…

Text truncated - open the document above for the full version.

Fender Musical Instruments Agent Authorization Company: Fender Musical Instruments Address: 17600 North Perimeter Drive, Suite 100, Scottsdale, AZ 85255 USA Product Name: Guitar headphone Amplifier Model Number(s): MUSTANG MICRO Product Description: Guitar headphone Amplifier We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020/07/16 Name: Larry Clauss Title: Principal Engineer - Compliance Company: Fender Musical Instruments

Fender Musical Instruments Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020/07/16 Subject; Request for Confidentiality FCC ID: XQW-MUMPR5833 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Part s List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Larry Clauss Title: Principal Engineer - Compliance

Model No.: MUSTANG MICRO

SN: CGPMYY123456 SN: CGPMYY123456 Label Laser etched

Model No.: MUSTANG MICRO BT Antenna

Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20051911-1E11 Page 1 of 6 RF EXPOSURE REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : Fender Musical Instruments Address : 17600 North Perimeter Drive, Suite 100, Scottsdale, AZ 85255 USA Equipment under Test : Guitar Headphone Amplifier Model No. : MUSTANG MICRO Type : PR 5833 Trade Mark : FCC ID : XQW-MUMPR5833 Manufacturer : Fender Musical Instruments Address : 17600 North Perimeter Drive, Suite 100, Scottsdale, AZ 85255 USA ■Report No.: DDT-R20051911-1E11 ■Issued Date: Oct. 10, 2020 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20051911-1E11 Page 2 of 6 TABLE OF CONTENTS Test report declares.......................................................................................................3 1. General information .................................................................................................................. 5 1.1. Description of Equipment ........................................................................................................ 5 1.2. Assess laboratory ..................................................................................................................... 5 2. RF Exposure evaluation .......................................................................................................... 5 2.1. Requirement .............................................................................................................................. 5 2.2. Calculation Method ................................................................................................................... 6 2.3. Estimation Result ...................................................................................................................... 6 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20051911-1E11 Page 3 of 6 TEST REPORT DECLARE Standard Used: KDB447498 D01 General RF Exposure Guidance v06 We Declare: The equipment described above is assessed by Dongguan Dongdian Testing Service Co., Ltd and in the configuration assessed the equipment complied with the standards specified above. The assessed results are contained in this report and Dongguan Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy and completeness of these assess. After evaluation, our opinion is that the equipment In Accordance with above standard. Report No: DDT-R20051911-1E11 Date of Receipt: May 21, 2020 Date of Test: May 21, 2020 ~ Oct. 10, 2020 Prepared By: Approved By: ___________________ _____________________ Talent Zhang/Engineer Damon Hu/EMC Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Dongguan Dongdian Testing Service Co., Ltd. Applicant : Fender Musical Instruments Address : 17600 North Perimeter Drive, Suite 100, Scottsdale, AZ 85255 USA Equipment under Test : Guitar Headphone Amplifier Model No. : MUSTANG MICRO Type : PR 5833 Trade Mark : Manufacturer : Fender Musical Instruments Address : 17600 North Perimeter Drive, Suite 100, Scottsdale, AZ 85255 USA Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20051911-1E11 Page 4 of 6 Revision history Rev. Revisions Issue Date Revised By --- Initial issue Oct. 10, 2020 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20051911-1E11 Page 5 of 6 1. General information 1.1. Description of Equipment 1.2. Assess laboratory Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, http://www.dgddt.com, Email: [email protected] 2. RF Exposure evaluation 2.1. Requirement Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. Limits for General Population/Uncontrolled Exposure EUT* Name : Guitar Headphone Amplifier Model Number : MUSTANG MICRO Type : PR 5833 EUT function description : Please reference user manual of this device Power Supply : Powered by DC 5V external adapter or 3.7V built-in lithium battery Radio Specification : Bluetooth V5.0 Operation Frequency : 2402MHz-2480MHz Modulation : GFSK, /4-DQPSK, 8DPSK Data Rate : 1 Mbps, 2 Mbps, 3 Mbps Antenna Type : Ceramic antenna, maximum PK gain: -3.03 dBi Sample Type : Series production Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20051911-1E11 Page 6 of 6 2.2. Calculation Method From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. 2.3. Estimation Result Mode PK Output power (dBm) Output power (mW) Antenna Gain (dBi) Antenna Gain (linear) MPE Values (mW/cm 2 ) MPE Limit (mW/cm 2 ) Bluetooth Max power 5.66 3.68 -3.03 0.50 0.00037 1 BLE Max power -1.16 0.77 -3.03 0.50 0.00008 1 Note: The estimation distance is 20cm Conclusion: No SAR evaluation required since transmitter power is below FCC threshold END OF REPORT

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20051911-1E5 Page 1 of 72 FCC ID AND ISED CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : Fender Musical Instruments Address : 17600 North Perimeter Drive, Suite 100, Scottsdale, AZ 85255 USA Equipment under Test : Guitar Headphone Amplifier Model No. : MUSTANG MICRO Type : PR 5833 Trade Mark : FCC ID : XQW-MUMPR5833 IC : 8690A-MUMPR5833 Manufacturer : Fender Musical Instruments Address : 17600 North Perimeter Drive, Suite 100, Scottsdale, AZ 85255 USA ■Report No.: DDT-R20051911-1E5 ■Issued Date: Oct. 10, 2020 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20051911-1E5 Page 2 of 72 Table of Contents Test report declares.......................................................................................................4 1. Summary of Test Results ............................................................................................... 6 2. General Test Information ............................................................................................... 7 2.1. Description of EUT ......................................................................................................... 7 2.2. Accessories of EUT ........................................................................................................ 8 2.3. Assistant equipment used for test .................................................................................. 8 2.4. Block diagram of EUT configuration for test .................................................................. 8 2.5. Deviations of test standard............................................................................................. 8 2.6. Test environment conditions .......................................................................................... 9 2.7. Test laboratory ............................................................................................................... 9 2.8. Measurement uncertainty ............................................................................................... 9 3. Equipment Used During Test ....................................................................................... 10 4. Maximum Peak Output Power ..................................................................................... 12 4.1. Block diagram of test setup .......................................................................................... 12 4.2. Limits ............................................................................................................................ 12 4.3. Test procedure ............................................................................................................. 12 4.4. Test result ..................................................................................................................... 12 4.5. Original test data .......................................................................................................... 13 5. 20dB Bandwidth and 99% Bandwidth .......................................................................... 16 5.1. Block diagram of test setup .......................................................................................... 16 5.2. Limits ............................................................................................................................ 16 5.3. Test procedure ............................................................................................................. 16 5.4. Test result ..................................................................................................................... 16 5.5. Original test data .......................................................................................................... 17 6. Carrier Frequency Separation ...................................................................................... 20 6.1. Block diagram of test setup .......................................................................................... 20 6.2. Limits ............................................................................................................................ 20 6.3. Test procedure ............................................................................................................. 20 6.4. Test result ..................................................................................................................... 20 6.5. Original test data .......................................................................................................... 21 7. Number of Hopping Channel ....................................................................................... 22 7.1. Block diagram of test setup .......................................................................................... 22 7.2. Limits ............................................................................................................................ 22 7.3. Test procedure ............................................................................................................. 22 7.4. Test result ..................................................................................................................... 22 7.5. Original test data .......................................................................................................... 22 8. Dwell Time .................................................................................................................... 24 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20051911-1E5 Page 3 of 72 8.1. Block diagram of test setup .......................................................................................... 24 8.2. Limits ...........................................…

Text truncated - open the document above for the full version.

Model No.: MUSTANG MICRO