XXMOM12001000Automotive Telematics GSM/GPS Module

OM12001 - Automotive Telematics On-board unit Platform Road Pricing - ECall Rev. 0.75 — 14th August 2012Preliminary Specification Document information InfoContent TitleOM12001 - Automotive Telematics On-board unit Platform Short title (1 line)OM12001 (ATOP) SubtitleRoad Pricing - ECall Short subtitle (1 line)Telematics Document IDATOP Preliminary Specification Document typePreliminary Specification Revision number0.75 KeywordsTelematics, Pay as you drive, eCall AbstractAn Automotive Telematics On Board Unit Platform for Road pricing, eCall and Telematics added value services ATOP Preliminary Specification© NXP B.V. 2012. All rights reserved. Preliminary SpecificationRev. 0.75 — 14th August 2012 2 of 42 NXP Semiconductors OM12001 (ATOP) Telematics Revision history RevDateDescription 0.759th August 2012Numerous typos corrected Reference links updated 0.746th August 2012Updated spec for “minus” version, ie. without NFC and security components. Updated label Added IC statement 0.731st February 2012Added RHF indication description to label 0.728th December 2011 Revision history added! NFC EMC section updated 2D barcode info added ATOP Preliminary Specification© NXP B.V. 2012. All rights reserved. Preliminary SpecificationRev. 0.75 — 14th August 2012 3 of 42 NXP Semiconductors OM12001 (ATOP) Telematics 1. Introduction OM12001 (ATOP) is the NXP Semiconductors platform for automotive telematics on-board units (OBU's) for applications such as road pricing and eCall, based upon the following technologies: •GSM for communication •GPS for localization service •NFC for short range communication, e.g. configuration and law enforcement •SmartMX smartcard with Java card JCOP OS for security •J9 Virtual Machine for application portability and easy creation •Dedicated processor for Real-Time and connection to system via Ethernet, USB, ADC, CAN, UART, ... •Targeting 10 years lifetime 1 in automotive conditions Thanks to on board ATOP security resources, product developers and manufacturers can offer products which guarantee fraud prevention and tamper evidence without extra effort for additional security precautions. These products can be used in end-to-end transaction systems requiring Common Criteria level 4+. OM12001 (ATOP) can be used by itself as a complete solution for GPS-GSM based road pricing and eCall applications. In this case OM12001 (ATOP) just needs to be complemented with a power supply, speaker, microphone, some knobs, and an optional display. OM12001 (ATOP) provides the processing power and SW application environment resources on board to complement road pricing and eCall with some other added value telematics services. OM12001 (ATOP) can also be applied as a 'front end' for more elaborate telematics products, by making its resources, i.e. GNSS, mobile communication, Security (ID authentication) available for use by other resources in the OBU. 2 different versions are available •OM12001/100: Implements all the features described in this document •OM12001/000: For market where security is not paramount, such as eCall, it does not include NFC short range communication, nor SmartMX security element 2. Product profile 2.1 Features Utility processor for interfacing with external world and house-keeping ARM Cortex M3 micro-controller with Ethernet, CAN, USB Host and device, UART, SPI, I2C Bus, ADCs, DAC, GPIOs, and PWMs Internal temperature sensor, and heating element 2 Application processor to run customer application code 1. in accordance with NXP's "Knowledge-Based Qualification" ("KBQ", based upon ZVEI's Robustness Validation [1] ), using AEC-Q100-defined qualification tests 2. Heating element present only in OM12001/100 ATOP Preliminary Specification© NXP B.V. 2012. All rights reserved. Preliminary SpecificationRev. 0.75 — 14th August 2012 4 of 42 NXP Semiconductors OM12001 (ATOP) Telematics Virtual Machine for customer application Communication coprocessor with Quad-band GSM/GPRS terminal Localization coprocessor with GPS receiver Near Field Communication (NFC) controller to connect to external vignette, smart card, mobile phone 3 Security processor for providing a source of trust SmartMX smartcard running JCOP 2.4.1 3 Mandatory and voluntary certification R&TTE and FCC passed for safety, EMC and RF Pre-certification for GCF, including field test Certification for PTCRB Automotive certification -40 to +85°C operating range Targeting 10 years lifetime in automotive conditions 1 2.2 Applications OM12001 (ATOP) can be used for Telematics applications where tamper-resistance, confidentiality, integrity, and authenticity of end-user information are required, e.g.: Road pricing Pay as you drive insurance Stolen vehicles tracking Emergency call ... 2.3 Quick reference data OM12001 (ATOP) is available with quad-band support in 2 versions 3. General description Figure 1 represents OM12001 (ATOP) connections in a typical application, with its connection to batteries, antennas, and SIM. For communication with external world, serial link, GPIOs, and ADCs will connect to screen, keys, and sensors. UART, CAN or USB can be used to connect to on board computer. 3. Only for OM12001/100 Table 1. ATOP versions Name Description OM12001/100Quad-band GPRS/GSM with antenna switch, GPS, NFC, SMX, Cortex M3 microcontroller with Ethernet OM12001/000Quad-band GPRS/GSM with antenna switch, GPS, Cortex M3 microcontroller with Ethernet ATOP Preliminary Specification© NXP B.V. 2012. All rights reserved. Preliminary SpecificationRev. 0.75 — 14th August 2012 5 of 42 NXP Semiconductors OM12001 (ATOP) Telematics Figure 2 represents a more conceptual view of OM12001 (ATOP) from a system point of view. Fig 1. ATOP module connections ATOP Preliminary Specification© NXP B.V. 2012. All rights reserved. Preliminary SpecificationRev. 0.75 — 14th August 2012 6 of 42 NXP Semiconductors OM12001 (ATOP) Telematics Three main components can be seen in Figure 2: •Application processor: This processor will run code s…

Text truncated - open the document above for the full version.

Registergericht  registered in:Vorstand  Board of Directors:7 layers AG, Borsigstrasse 11 Ratingen, HRB 3264Dr. Wolfgang Dahm40880 Ratingen, Germany Aufsichtsratsvorsitzende  Dr. Hans-Jürgen MeckelburgPhone: +49 (0) 2102 749 0 Chairman of the Supervisory Board:Fax: +49 (0) 2102 749 350 Dr. Sabine Grobeckerwww.7Layers.com Patrick Lomax 07.08.2012 Phone +49 (0) 2102 749 308 Fax +49 (0) 2102 749 350 Email: [email protected] request for a modular approval - FCC ID XXMOM12001 000 Dear Application Examiner, the NXP Semiconductors module OM12001/000 is seeking FCC authorization as a modular transmitter. The requirement of the FCC part 15.212 are met. The following requirements are fulfilled: 1. The radio portion of the module is contained in its own RF shielding. Yes, The EUT does provide a RF shielding Refer to EUT Picture 2. The modular transmitter must have buffered modulation/data inputs Modulation an d g eneration of data sen t to RF power a mplifier i s un der control of STE PNX4 902 baseband. Its design ensures that no over modulation or excessive data rate will occur 3. The modular transmitter must have its own power supply regulation Power supply regulation is integrated into baseband PNX4902 and RF power amplifier SKY77531 for mobile communications. For NFC, it is also integrated into NXP PN532, whereas discrete LDOs are used for GPS and microcontroller 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c NA. Only for unlicensed transmitters. FCC Federal Communications Commission - 2 - 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration via a test kit. Please see section photographs of test configuration in the test report. 6. The modular transmitter must be labelled with its own FCC ID number Please see exhibition label sample for the FCC ID of this module; and also in the exhibition users manual, there are instructions given to the OEM on how to label the end product. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are give in the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. The EUT complies with RF exposure requirement for mobile configurations - MPE report is submitted Please contact us if you have any additional questions. Best Regards 7layers AG

7 Layers AG Patrick Lomax 7 layers AG Borsigstr. 11 40880 Ratingen Germany Attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 CONFIDENTIALITY REQUEST FOR FCC-ID: XXMOM12001 000 Sirs, In accordance with FCC Rule Section 0.457 and 0.459 of CFR 47, 7 l ayers AG (authorized by NXP Semiconductors) hereby requests schematic diagrams, Parts lists, Tune-up procedure, Block diagram , and Operational Description submitted with this application to be withheld from public review. These documents contain detailed system and equipment des cription and related informatio n about the product, which NXP consi ders to be proprietary. This information shou ld never get into the possession of competitors, which would be harmful for our bu siness. Do not hesitate to contact me if you have any additional questions. Signature and date 10/08/2012

I . o

FCC ID XXMOM12001000 IC ID: 8764A-OM12001000 Maximum Permissible Exposure as specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure Frequency range (MHz) Power density (mW/cm²) 300 – 1,500 f/1500 1,500 – 100,000 1.0 Calculations 850 MHz band The output power at antenna input terminal: 31.66 dBm Predicted distance R: 20 cm Predicted frequency: 848.8 MHz MPE limit S: 0.5659 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = P*G / (4R²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum allowable antenna gain: (Mobile applications) 2.24 dBi Maximum allowable antenna gain: (Fixed applications) 2.75 dBi Prediction The maximum allowable MPE value of 0.5659 mW/cm² will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 2.24 dBi will be used. This means that the power density levels in a distance of 20 cm are in accordance with the FCC regulations as long as the used antenna has a gain below 2.24 dBi for mobile applications. Calculations 1900 MHz band The output power at antenna input terminal: 28.81 dBm Prediction distance R: 20 cm Prediction frequency: 1850.2 MHz MPE limit S: 1 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = P*G / (4R²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum allowable antenna gain for mobile/portable stations: 4.20 dBi Maximum allowable antenna gain for other stations: 8.20 dBi Prediction The maximum allowable MPE value of 1 mW/cm² will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 8.20 dBi will be used. This means that the power density levels in a distance of 20 cm are in accordance with the FCC regulations as long as the used antenna has a gain below 8.20 dBi. For mobile and portable stations the EIRP is restricted to 2.0 Watts, (§24.232 (c)). Therefore the maximum antenna gain is 4.20 dBi. Note. The calculation was made under the consideration of the duty cycle effect. Yours sincerely _____________________________ Patrick Lomax, Project Manager

Final Report on OM12001/000 MDE_NXP_1201_FCCe According to: FCC 47 CFR Ch.1 Part 24, Subpart E Report Reference: August 09, 2012 Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Ralf Mertens USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Reference: MDE_NXP_1201_FCCe According to: FCC 47 CFR Ch.1 Part 24, Subpart E 1 Administrative Data 1.1 Project Data Patrick Lomax Project Responsible: 2012/08/09 Date Of Test Report: 2012/08/07 Date of first test: 2012/08/08 Date of last test: 1.2 Applicant Data Company Name:NXP Semiconductors 2 esplanade Anton Philips, Campus EffiScience, Colombelles BP2000 Street: 14906 Caen Cedex 9 City: France Country: Contact Person: Mr. Hugues de Perthuis BU Automotive & Identification Department: +33 2.31.45.23.98 Phone: +33 2.31.45.38.60 Fax: 1.3 Test Laboratory Data The following list shows all places and laboratories involved for test result generation: 7 layers DE Company Name : 7 layers AG Street : Borsigstrasse 11 City : 40880 Ratingen Country : Germany Contact Person : Mr. Michael Albert Phone : +49 2102 749 201 Fax : +49 2102 749 444 E Mail : [email protected] Laboratory Details Accreditation InfoLab IDIdentificationResponsible DAkkS-Registration no. D-PL-12140-01-01Radiated Emissions Lab 1Mr. Robert Machulec Mr. Andreas Petz DAkkS-Registration no. D-PL-12140-01-01Radio Lab Lab 2Mr. Robert Machulec Mr. Andreas Petz Page 2 of 24 Reference: MDE_NXP_1201_FCCe According to: FCC 47 CFR Ch.1 Part 24, Subpart E 2.2 Detailed Description of OUT Samples Sample : AA01 OUT Identifier OM12001/000 Sample Description Conducted Sample Serial No. 35477104016187 HW Status B2.3 SW Status 7.4.4 Date of Receipt 2012/05/09 Low VoltageLow Temp. 3.4 V-40 °C High Temp.High Voltage 4.8 V85 °C Normal Temp.Nominal Voltage 4.2 V23 °C 2.3 OUT Features Features for OUT: OM12001/000 Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 Dant removable antenna supplied and type tested with the radio equipment, designed as an example part of the equipment DC The OUT is powered by or connected to DC Mains GSM850 EUT supports GSM850 band 824MHz - 849MHz PCS1900 EUT supports PCS1900 band 1850MHz - 1910MHz TantC temporary antenna connector, which may be only built-in for testing, designed as an example part of the equipment 2.4 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No. List of OUT samplesList of auxiliary equipment AA01 AA01Conducted Sample Sample: Page 4 of 24 Reference: MDE_NXP_1201_FCCe According to: FCC 47 CFR Ch.1 Part 24, Subpart E 3 Results 3.1 General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: 1. The laboratory environmental conditions are recorded and available in the Interlab system for each performed test. 2. This is a delta test report based on the removal of the RFID radio from the OM12001/000 NXP Semiconductor Module. Note: 3.2 List of the Applicable Body (Body for Scope: FCC_v2) DesignationDescription Part 24, Subpart E - Broadband PCS FCC47CFRChIPART24PERSONAL COMMUNICATIONS SERVICES 3.3 List of Test Specification Test Specification: FCC part 2 and 24 Version10-1-11 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 24 - PERSONAL COMMUNICATIONS SERVICES Page 5 of 24 Reference: MDE_NXP_1201_FCCe According to: FCC 47 CFR Ch.1 Part 24, Subpart E 3.4 Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab 24.1 RF Power Output §2.1046, §24.232 24.1; Frequency Band = 1900, Mode = GSM, Channel = 661, Frequency = 1880.0MHz, Method = conducted 2012/08/08AA01Lab 2Passed 24.4 Field strength of spurious radiation §2.1053, §24.238 24.4; Frequency Band = 1900, Mode = GSM, Channel = 661, Frequency = 1880.0MHz 2012/08/07AA01Lab 1Passed Page 6 of 24 Reference: MDE_NXP_1201_FCCe According to: FCC 47 CFR Ch.1 Part 24, Subpart E 3.5 Detailed Results 3.5.1 24.1 RF Power Output §2.1046, §24.232 Test: 24.1; Frequency Band = 1900, Mode = GSM, Channel = 661, Frequency = 1880.0MHz, Method = conducted Result: Passed Setup No.: AA01 Date of Test: 2012/08/08 10:38 Body: FCC47CFRChIPART24PERSONAL COMMUNICATIONS SERVICES Test Specification: FCC part 2 and 24 Detailed Results: detector trace resolution bandwidth /kHz conducted peak value /dBm peak value EIRP /dBm peak value ERP /dBm limit /dBm verdict peak maxhold 300 28.20 28.20 26.06 EIRP 33 passed average maxhold 300 27.93 27.93 25.79 EIRP 33 passed rms maxhold 300 28.04 28.04 25.90 EIRP 33 passed antenna gain = 0 dBi Page 7 of 24 Reference: MDE_NXP_1201_FCCe According to: FCC 47 CFR Ch.1 Part 24, Subpart E 3.5.2 24.4 Field strength of spurious radiation §2.1053, §24.238 Test: 24.4; Frequency Band = 1900, Mode = GSM, Channel = 661, Frequency = 1880.0MHz Result: Passed Setup No.: AA01 Date of Test: 2012/08/07 19:38 Body: FCC47CFRChIPART24PERSONAL C…

Text truncated - open the document above for the full version.

Final Report on OM12001/000 MDE_NXP_1201_FCCg According to: FCC 47 CFR Ch.1 Part 22, Subpart H Report Reference: August 24, 2012 Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Ralf Mertens USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Reference: MDE_NXP_1201_FCCg According to: FCC 47 CFR Ch.1 Part 22, Subpart H 1Administrative Data 1.1Project Data Patrick Lomax Project Responsible: 2012/08/24 Date Of Test Report: 2012/08/06 Date of first test: 2012/08/07 Date of last test: 1.2Applicant Data Company Name:NXP Semiconductors 2 esplanade Anton Philips, Campus EffiScience, Colombelles BP2000 Street: 14906 Caen Cedex 9 City: France Country: Contact Person: Mr. Hugues de Perthuis BU Automotive & Identification Department: +33 2.31.45.23.98 Phone: +33 2.31.45.38.60 Fax: 1.3Test Laboratory Data The following list shows all places and laboratories involved for test result generation: 7 layers DE Company Name : 7 layers AG Street : Borsigstrasse 11 City : 40880 Ratingen Country : Germany Contact Person : Mr. Michael Albert Phone : +49 2102 749 201 Fax : +49 2102 749 444 E Mail : [email protected] Laboratory Details Accreditation InfoLab IDIdentificationResponsible DAkkS-Registration no. D-PL-12140-01-01Radiated Emissions Lab 1Mr. Robert Machulec Mr. Andreas Petz DAkkS-Registration no. D-PL-12140-01-01Radio Lab Lab 2Mr. Robert Machulec Mr. Andreas Petz Page 2 of 24 Reference: MDE_NXP_1201_FCCg According to: FCC 47 CFR Ch.1 Part 22, Subpart H 2.2 Detailed Description of OUT Samples Sample : AA01 OUT Identifier OM12001/000 Sample Description 6WDQGDUG Sample Serial No. 35477104016187 HW Status B2.3 SW Status 7.4.4 Date of Receipt 2012/05/09 Low VoltageLow Temp. 3.4 V-40 °C High Temp.High Voltage 4.8 V85 °C Normal Temp.Nominal Voltage 4.2 V23 °C 2.3 OUT Features Features for OUT: OM12001/000 Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 Dant removable antenna supplied and type tested with the radio equipment, designed as an example part of the equipment DC The OUT is powered by or connected to DC Mains GSM850 EUT supports GSM850 band 824MHz - 849MHz PCS1900 EUT supports PCS1900 band 1850MHz - 1910MHz SRDEUT is a short range device TantC temporary antenna connector, which may be only built-in for testing, designed as an example part of the equipment 2.4 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No. List of OUT samplesList of auxiliary equipment AA01 AA01Conducted Sample Sample: Page 4 of 24 Reference: MDE_NXP_1201_FCCg According to: FCC 47 CFR Ch.1 Part 22, Subpart H 3Results 3.1General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: 1. The laboratory environmental conditions are recorded and available in the Interlab system for each performed test. 2. This is a delta test report based on the removal of the RFID radio from the OM12001/000 NXP Semiconductor Module. 3. This report replaces the report referenced by MDE_NXP_1201_FCCf Note: 3.2List of the Applicable Body (Body for Scope: FCC_v2) DesignationDescription Part 22, Subpart H - Cellular Radiotelephone Service FCC47CFRChIPART22PUBLIC MOBILE SERVICES 3.3List of Test Specification Test Specification: FCC part 2 and 22 Version10-1-11 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 22 - PUBLIC MOBILE SERVICES Page 5 of 24 Reference: MDE_NXP_1201_FCCg According to: FCC 47 CFR Ch.1 Part 22, Subpart H 3.4Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab 22.1 RF Power Output §2.1046, §22.913 22.1; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz, Method = conducted 2012/08/06AA01Lab 2Passed 22.4 Field strength of spurious radiation §2.1053, §22.917 22.4; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz 2012/08/07AA01Lab 1Passed Page 6 of 24 Reference: MDE_NXP_1201_FCCg According to: FCC 47 CFR Ch.1 Part 22, Subpart H 3.5Detailed Results 3.5.122.1 RF Power Output §2.1046, §22.913 Test: 22.1; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz, Method = conducted Result: Passed Setup No.: AA01 Date of Test: 2012/08/06 12:05 Body: FCC47CFRChIPART22PUBLIC MOBILE SERVICES Test Specification: FCC part 2 and 22 Detailed Results: detectortrace resolution bandwidth /kHz conducted peak value /dBm peak value EIRP /dBm peak value ERP /dBm limit /dBmverdict peakmaxhold30031.5031.5029.36ERP 38.45passed averagemaxhold30031.0631.0628.92ERP 38.45passed rmsmaxhold30031.0631.0628.92ERP 38.45passed antenna gain = 0 dBi Page 7 of 24 Reference: MDE_NXP_1201_FCCg According to: FCC 47 CFR Ch.1 Part 22, Subpart H 3.5.222.4 Field strength of spurious radiation §2.1053, §22.917 Test: 22.4; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz Result: Passed Setup No.: AA01 Date of Test: 2…

Text truncated - open the document above for the full version.

Final Report on OM12001 MDE_NXP_1201_FCCc According to: FCC 47 CFR Ch.1 Part 22, Subpart H Report Reference: July 20, 2012 Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Ralf Mertens USt-IdNr  VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Reference: MDE_NXP_1201_FCCc According to: FCC 47 CFR Ch.1 Part 22, Subpart H 1 Administrative Data 1.1 Project Data Patrick Lomax Project Responsible: 2012/07/20 Date Of Test Report: 2012/06/04 Date of first test: 2012/06/06 Date of last test: 1.2 Applicant Data Company Name:NXP Semiconductors 2 esplanade Anton Philips, Campus EffiScience, Colombelles BP2000 Street: 14906 Caen Cedex 9 City: France Country: Contact Person: Mr. Hugues de Perthuis BU Automotive & Identification Department: +33 2.31.45.23.98 Phone: +33 2.31.45.38.60 Fax: 1.3 Test Laboratory Data The following list shows all places and laboratories involved for test result generation: 7 layers DE Company Name : 7 layers AG Street : Borsigstrasse 11 City : 40880 Ratingen Country : Germany Contact Person : Mr. Michael Albert Phone : +49 2102 749 201 Fax : +49 2102 749 444 E Mail : [email protected] Laboratory Details Accreditation InfoLab IDIdentificationResponsible DAkkS-Registration no. D-PL-12140-01-01Radiated Emissions Lab 1Mr. Robert Machulec Mr. Andreas Petz DAkkS-Registration no. D-PL-12140-01-01Radio Lab Lab 2Mr. Robert Machulec Mr. Andreas Petz Page 2 of 54 Reference: MDE_NXP_1201_FCCc According to: FCC 47 CFR Ch.1 Part 22, Subpart H 2.2 Detailed Description of OUT Samples Sample : A01 OUT Identifier OM12001 Sample Description Conducted Sample Serial No. 35477104016187 HW Status B2.3 SW Status 7.4.4 Date of Receipt 2012/05/09 Low VoltageLow Temp. 3.4 V-40 °C High Temp.High Voltage 4.8 V85 °C Normal Temp.Nominal Voltage 4.2 V23 °C Sample : B01 OUT Identifier OM12001 Sample Description Conducted Sample Serial No. 35477104016156 HW Status B2.3 SW Status 7.4.4 Date of Receipt 2012/05/09 Low VoltageLow Temp. 3.4 V-40 °C High Temp.High Voltage 4.8 V85 °C Normal Temp.Nominal Voltage 4.2 V23 °C 2.3 OUT Features Features for OUT: OM12001 Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 Dant removable antenna supplied and type tested with the radio equipment, designed as an example part of the equipment DC The OUT is powered by or connected to DC Mains GSM850 EUT supports GSM850 band 824MHz - 849MHz PCS1900 EUT supports PCS1900 band 1850MHz - 1910MHz SRDEUT is a short range device TantC temporary antenna connector, which may be only built-in for testing, designed as an example part of the equipment Page 4 of 54 Reference: MDE_NXP_1201_FCCc According to: FCC 47 CFR Ch.1 Part 22, Subpart H 2.4 Auxiliary Equipment AE No.Serial No.SW StatusHW StatusDescriptionType Designation AE 01Omni-Dir 1dBi Gain GSM Multiband Magnet Antenna SMA 2.5 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No. List of OUT samplesList of auxiliary equipment S01_A01 AE 01GSM Multiband Magnet Antenna SMAA01Conducted Sample Sample: S01_B01 AE 01GSM Multiband Magnet Antenna SMAB01Conducted Sample Sample: 3 Results 3.1 General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: The laboratory environmental conditions are recorded and available in the Interlab system for each performed test. Note: 3.2 List of the Applicable Body (Body for Scope: FCC_v2) DesignationDescription Part 22, Subpart H - Cellular Radiotelephone Service FCC47CFRChIPART22PUBLIC MOBILE SERVICES 3.3 List of Test Specification Test Specification: FCC part 2 and 22 Version10-1-11 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 22 - PUBLIC MOBILE SERVICES Page 5 of 54 Reference: MDE_NXP_1201_FCCc According to: FCC 47 CFR Ch.1 Part 22, Subpart H 3.4 Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab 22.1 RF Power Output §2.1046, §22.913 22.1; Frequency Band = 850, Mode = GSM, Channel = 128, Frequency = 824.2MHz, Method = conducted 2012/06/05S01_A01Lab 2Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 128, Frequency = 824.2MHz, Method = radiated 2012/06/05S01_B01Lab 1Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz, Method = conducted 2012/06/05S01_A01Lab 2Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz, Method = radiated 2012/06/05S01_B01Lab 1Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 251, Frequency = 848.8MHz, Method = conducted 2012/06/05S01_A01Lab 2Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 251, Frequency = 848.8MHz, Method = radiated 2012/06/05S01_B01Lab 1Passed 22.2 Frequency stability §2.1055 22.2; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz 2012/06/06S01_B01Lab 2Passed 22.3 Spurious emissions at antenna terminals §2.1051, §22.91…

Text truncated - open the document above for the full version.

Test Laboratory: Borsigstr. 11 Germany 7Layers AG 40880 Ratingen Not…

Text truncated - open the document above for the full version.