Y7ZDL7101TWWall-mounted remote control

INSTRUCTIONS FOR OPERATION SETING THE OPERATING CONTROLS 1. This device which one of black lines series with AC 120V power supply. Now, we take 60Hz power supply to afford power supply of transmitter when it trough rectify. So, there is no troubles with change batteries forever. 2. Store the controller away from excess heat or humidity . 3. Transmission controls speed and light of fan through 26 bit encoding connection signal, 10 buttons and 10sets switch .Integrated circuits through theRF transmission,Carrier is composed of quartzoscillator. 4. *Operation buttons on the panel of transmitter . key – For fan speed LOW key – For fan speed MED key – For fan speed HI key – For fan speed off . key – Fan reverse key – For light brightness and ON/OFF control . 5. Start the fan : Press the selected speed button to run the fan at the desired . By press the speed up-down button to select the needed speed, and though the LED light to see the fan speed. 6. Turn off the fan : Press the OFF button . 7. Light control : Turn the light on or off by only touching the LIGHT CONTROL button . Keep pressing the button in excess of 0.7 second it becomes a dimmer , the light varies cyclically in 0.8 second . One of the important feature of this control is AUTO-RESUME . After power on , it allows the light return to where it was off . 8. Power switch Turn off the power for Fan and Light GENERAL INFORMATION : This REMOTE controller is designed to separately control your ceiling fan speed and light brightness . INSTRUCTIONS FOR INSTALLATION AND OPERATION OF FAN SPEED CONTROLLER A. Setting the code on your new transmitter . 1. Slide code switches to your choice of UP and DOWN position . Factory setting is all UP . Do not use this setting . Use ball point pen or small screwdriver . Slide firmly up or down . B. Setting the code on your new Receiver unit . 1. Slide code switches to the same positions as set on your transmitter . They must be set to same positions to work . 2. Make sure the code switches are on the left positions . NOTICE : The changes or modifications not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment . THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATIONS IS SUBJECT INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFEERENCE THAT MAY CAUSE UNDESRIED OPERATION. FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC Caution: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)This device may not cause interference; and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux apparei ls radio exemp ts de licence. L 'exploitation est autorisée aux deux c onditions s uivant es: (1)l' appareil ne doit pas p roduire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même s i le brouillage est susceptible d'en compromettre le fonctionnement. Th e device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restricti on. L'appa reil a été évalué pour répondre aux exigences générales d'exposition RF. L'appareil peut être utilisé dans des conditions d'exposition portables sans restriction.

Co m Add 411 Pr o Mod FCC We to a equ We ap p disc MiC Sig Na m Title Com mpany: S.Q dress: No.1 149 Taiwan oduct Name del Numbe C ID: Y7ZD authorize M act on our be uipment. declare th a proval and c cuss any iss COM Labs o nature: me: Jo e: G mpany: S Q.M CO., L 1599 GUA n e: Wall-mou er(s): DL-71 L7101TW MiCOM Lab ehalf on all at MiCOM L certification sues concer on our beha ones Lin General ma S.Q.M CO., S.Q Agent TD. ANGXING R unted remot 101TW bs Inc., 575 matters co n Labs Inc. is of equipm e rning the ap alf shall have nager LTD. Q.M CO., t Autho RD.TAIPIN te control Boulder C o ncerning th allowed to f ent to the re pproval app e the same , LTD. orizatio NG CITY T ourt, Pleasa e certificatio forward all i gulatory ag plication. An effect as a on AICHUNG anton, Califo on of above information encies as r ny and all ac cts of our o Date: 20 G COUNTY ornia 94566 e named related to t equired and cts carried o wn. 20/06/22 Y 6, USA, the d to out by

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addi t in Title busine s authoriz For 4 O For 1 It is ou r corresp docume authoriz Sincer e Signatu Name: Title: G of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: Y7ZDL71 om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Operatio tional to abo 47 CFR §2 ss sensitive zed devices User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: Jones Lin eneral ma n ing Techno cations Com s Road 046 for Confiden 01TW Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram onal Descrip ove mention .803 and th informatio n s, we reque anual rsuant to P u ursuantto KD ding that all uring the ce s informatio sued. nager S.Q logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption ned docume e importatio n remains c st Short Te ublic Notice DB 726920 l measurem ertification re on will be av Q.M CO. ssion’s rule old the follow nitely. m and equi e equipmen ould give co ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for , LTD. s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the Date: 2020 457 and §0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq 0/06/22 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

External Photos

Label & label location Wall-mounted remote control Model: DL-7101TW FCC ID: Y7ZDL7101TW IC: 10874A-DL7101TW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Internal Photos Antenna

Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000184E FCC Part 15C Test Report FCC ID: Y7ZDL7101TW Product Name: Wall-mounted remote control Trademark: N/A Model Name : DL-7101TW Prepared For : S.Q.M CO., LTD. Address : No.1599 GUANGXING RD.TAIPING CITY TAICHUNG COUNTY 41149 Taiwan Prepared By : Shenzhen BCTC Testing Co., Ltd. Address : BCTC Building & 1-2F, East of B Building, Pengzhou Industrial, Fuyuan 1st Road, Qiaotou Community, Fuyong Street, Bao’an District, Shenzhen, China Test Date: Jun. 01, 2020 – Jun. 12, 2020 Date of Report : Jun. 12, 2020 Report No.: BCTC2006000184E Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000184E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 2 of 34 VERIFICATION OF COMPLIANCE Applicant’s name ........ S.Q.M CO., LTD. Address ....................... . No.1599 GUANGXING RD.TAIPING CITY TAICHUNG COUNTY 41149 Taiwan Manufacture's Name .. . S.Q.M CO., LTD. Address ....................... . No.1599 GUANGXING RD.TAIPING CITY TAICHUNG COUNTY 41149 Taiwan Product description Product name ................ Wall-mounted remote control Trademark: N/A Model Name: DL-7101TW Test Standards: FCC Part15.231 ANSI C63.10-2013 This device described above has been tested by BCTC, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of BCTC, this document may be altered or revised by BCTC, personal only, and shall be noted in the revision of the document. Test Result ....................................... Pass Prepared by(Engineer): Cai Fang Zhong Reviewer(Supervisor): Eric Yang Approved(Manager): Zero Zhou Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000184E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 3 of 34 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 8 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 8 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 9 3 . EMC EMISSION TEST 11 3.1 CONDUCTED EMISSION MEASUREMENT 11 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 11 3.1.2 TEST PROCEDURE 12 3.1.3 DEVIATION FROM TEST STANDARD 12 3.1.4 TEST SETUP 12 3.1.5 EUT OPERATING CONDITIONS 12 3.1.6 TEST RESULTS 12 3.2 RADIATED EMISSION MEASUREMENT 15 3.2.1 RADIATED EMISSION LIMITS 15 3.2.2 TEST PROCEDURE 16 3.2.3 TEST SETUP 17 3.2.4 EUT OPERATING CONDITIONS 18 3.2.5 TEST RESULTS 19 4 . BANDWIDTH TEST 24 4.1 APPLIED PROCEDURES / LIMIT 24 4.1.1 TEST PROCEDURE 24 4.1.2 DEVIATION FROM STANDARD 24 4.1.3 TEST SETUP 24 4.1.4 EUT OPERATION CONDITIONS 24 4.1.5 TEST RESULTS 25 5 . CALCULATION OF AVERAGE FACTOR 26 6 . DWELL TIME 28 6.1 DEVIATION FROM STANDARD 28 6.2 TEST SETUP 28 6.3 EUT OPERATION CONDITIONS 28 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000184E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 4 of 34 Table of Contents Page 6.4 TEST RESULTS 29 7 . ANTENNA REQUIREMENT 30 7.1 STANDARD REQUIREMENT 30 7.2 EUT ANTENNA 30 8 . EUT TEST PHOTO 31 9 . EUT PHOTO 33 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000184E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 5 of 34 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.231) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.209,15.231b Fundamental &Radiated Spurious Emission Measurement PASS 15.231c Occupy Bandwidth PASS 15.231a Dwell time PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000184E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 6 of 34 1.1 TEST FACILITY Shenzhen BCTC Testing Co., Ltd. Add.: BCTC Building & 1-2F, East of B Building, Pengzhou Industrial, Fuyuan 1st Road, Qiaotou Community, Fuyong Street, Bao’an District, Shenzhen, China FCC Test Firm Registration Number: 712850 IC Registered No.: 23583 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 3m camber Radiated spurious emission(30MHz-1GHz) U=4.3dB 2 3m chamber Radiated spurious emission(1GHz-18GHz) U=4.5dB 3 3m chamber Radiated spurious emission(18GHz-40GHz) U=3.34dB 4 Conducted Adjacent channel power U=1.38dB 5 Conducted output power uncertainty Above 1G U=1.576dB 6 Conducted output power uncertainty below 1G U=1.28dB 7 humidity uncertainty U=5.3% 8 Temperature uncertainty U=0.59°C Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000184E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 7 of 34 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Wall-mounted remote control Trade Name N/A Model Name DL-7101TW Serial Model N/A Model Difference N/A Product Description Operation Frequency: 303.875MHz Modulation Type: ASK Antenna Type: PCB antenna Antenna Gain: 0dBi Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Ratings AC120V/60Hz Connecting I/O Port(s) Please refer to the User's Manual Hardware version 20-IT-023-V1 Software version A1 Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Shenzhen BCTC Testing…

Text truncated - open the document above for the full version.

Shenzhen BCTC Testing Co., Ltd. Radiated Measurement Photos Shenzhen BCTC Testing Co., Ltd. Conducted Measurement Photos