YA8-1238Wireless PIR sensor and programmable Timer

Model # 1238A Questions, problems, missing parts? Before returning to the store, Call Defiant Customer Service 8 a.m. – 6 p.m. EST, Monday – Friday 86-769-87712264 WWW.automatic.com.hk THANK YOU We appreciate the trust and confidence you have placed in Defiant through the purchase of this digital timer. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Defiant! Safety Information FCC NOTE This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. € This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: € Reorient or relocate the receiving antenna. € Increase the separation between the equipment and receiver. € Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. € Consult the dealer or an experienced radio/TV technician for help. Ratings 120 VAC, 60Hz 960W, 8A General Purpose / Resistive 960W, 8A Tungsten ` EE – Motion Sensor Mount x 1 Product Description MOTION SENSOR 1. PIR Sensor: Face this towards the area you wish to detect motion. This motion sensor is designed to only detect motion when it is darker outside. 2. Sensor Light Indicator: Lights up red when sensor detects motion. 3. Light Sensitivity Knob: Turn the knob to the light level to which you want the motion sensor to activate and turn your light or device on. 4. Motion Sensitivity Slide Switch: After finished testing, set to either High or Low sensitivity TIMER 5. AUTO button: Press once to activate the timer after programming is complete. 6. ON/OFF button: Turns the timer ON/OFF. 7. SETUP button: Press once to set the calendar/clock. Press twice to set or change programming. 8. “+” and “-” buttons: Press to scroll through menu options. 9. Enter Button: Press to confirm indicated settings. 10. Reset button: Press and hold for three seconds to reset the system. 11. RND button: Press once to activate random feature. 12. TIMER DOOR: Close after programing. Press to turn ON/OFF (timer override) 1 2 3 4 5 6 7 8 9 10 11 12 TIMER INSTALLATION Installation Instructions Continued 2 Motion Sensor Installation: € On back of Motion Sensor, remove two small screws and gently remove plastic back to install 3 x AA batteries following the polarities marked within the battery housing. Replace plastic back and tighten the two small screws. Ensure there are no gaps when plastic back is fully screwed back in. € Put the motion sensor slide switch to “T” (Test mode) and red indicator light will come when it detects motion. Your wired light or device should now turn on when motion is detected (as long as your timer is installed and wired correctly). € After finished testing the motion sensor with your timer, switch the slide switch to “A” (Automatic mode). The motion sensor will now match what is programmed within your timer (see Operating Instructions). € Take both screws (DD) and install motion sensor mount (EE) in location where you wish your motion sensor to detect motion. Ensure that the “ UP” is facing upwards when installing. Ensure that the motion sensor mount (EE) is securely installed, but do not over-tighten screws (DD). € Gently slide the motion sensor onto the motion sensor mount (EE). Ensure that both the motion sensor and the mount are facing upwards where it says “ UP” € Gently adjust the motion sensor to where you wish it to detect motion. Install screws (DD) into these two holes. 3 Setting additional Motion Sensors/ Motion Sensor timeout feature • “PAIR” will begin to flash. Press the enter button (7) to continue. • “B” will be flashing. If you have a 2 nd motion sensor to use with the timer, make sure it is closeby to pair with the timer now. If not, press enter button (7) to continue. • “SNSR” will begin to flash. Press the enter button (7) to continue. • Choose between 5 to 30 minutes for the motion sensor timeout feature. This feature will start a countdown whenever the motion sensor detects movement. The light or device connected to the timer will stay on for the amount of time you choose in this step.

External photos (1) EUT External Photo-Tx Unit (2) EUT External Photo-Tx Unit (3) EUT External Photo-Tx Unit (4) EUT External Photo-Tx Unit (5) EUT External Photo-Tx Unit (6) EUT External Photo-Tx Unit (7) EUT External Photo-Tx Unit

Internal photos (1) EUT Internal Photo-Tx Unit (2) EUT Internal Photo-Tx Unit (3) EUT Internal Photo-Tx Unit

A Test Lab Techno Corp. Report Number： 1306FR11 Page 1 of 21 FCC 47 CFR PART 15 SUBPART C Product Type ： PIR wireless remote control light switch Applicant ： Dongguan BaoshanElectronic Ltd. Address ： Baoshan industry zone, ZMT town, Dongguan city, GD province, China Trade Name ： AML Model Number ： 1238A Test Specification ： FCC 47 CFR PART 15 SUBPART C: Oct., 2011 ANSI C63.4-2009 Application Purpose ： Original Receive Date ： February 19, 2013 Test Period ： March 20, 2013~ March 28, 2013 Issue Date ： April 07, 2013 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number：1306FR11 Page 2 of 21 Revision History Rev. Issue Date Revisions Revised By 00 April 07, 2013 Initial Issue A Test Lab Techno Corp. Report Number：1306FR11 Page 3 of 21 Ve r i f i c a t i o n o f C o m p l i a n c e Issued Date: 04/07/2013 Product Type : PIR wireless remote control light switch Applicant : Dongguan BaoshanElectronic Ltd. Address : Baoshan industry zone, ZMT town, Dongguan city, GD province, China Trade Name : AML Model Number : 1238A FCC ID : YA8-1238 EUT Rated Voltage : DC 4.5V Test Voltage : DC 4.5V Applicable Standard : FCC 47 CFR PART 15 SUBPART C: Oct., 2011 ANSI C63.4-2009 Test Result : Complied Application Purpose : Original Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.231 . The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) A Test Lab Techno Corp. Report Number：1306FR11 Page 4 of 21 TABLE OF CONTENTS 1 General Information ......................................................................................................... 5 1.1. Summary of Test Result ............................................................................................................ 5 1.2. Measurement Uncertainty ......................................................................................................... 5 2 EUT Description................................................................................................................ 6 3 Test Methodology ............................................................................................................. 7 3.1. Mode of Operation .................................................................................................................... 7 3.2. EUT Exercise Software ............................................................................................................. 7 3.3. Configuration of Test System Details ....................................................................................... 7 3.4. Test Site Environment ............................................................................................................... 7 4 Conducted Emission Measurement ................................................................................ 8 4.1. Limit .......................................................................................................................................... 8 4.2. Test Instruments ........................................................................................................................ 8 4.3. Test Setup .................................................................................................................................. 8 4.4. Test Procedure ........................................................................................................................... 9 4.5. Test Result ................................................................................................................................. 9 5 Radiated Emissions Measurement ............................................................................... 10 5.1. Limit ........................................................................................................................................ 10 5.2. Test Instruments ....................................................................................................................... 11 5.3. Setup........................................................................................................................................ 12 5.4. Test Procedure ......................................................................................................................... 13 5.5. Test Result ............................................................................................................................... 15 6 Bandwidth Measurement ............................................................................................... 19 6.1. Limit ........................................................................................................................................ 19 6.2. Test Setup ............................................................…

Text truncated - open the document above for the full version.

SET UP photo Radiated Emission: front view Radiated Emission: rear view