YCNA2010-LLenovo Mobile Phone

Important Product Information Guide v1.0 Lenovo A2010-l : CAUTION To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the product.   CAUTION Risk of explosion if the battery is replaced with an incorrect type.    CAUTION Do not attempt to replace the internal rechargeable lithium ion battery. Contact Lenovo Support for factory replacement. —    NOTE Adapter shall be installed near the equipment and shall be easily accessible. Users have to use the connection to USB interfaces with USB 2.0 version or higher. DANGER Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of suffocation. CAUTION Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphone and headphone output voltage and the sound pressure level. Therefore, to protect your hearing, adjust the equalizer to an appropriate level.     —95 WARNING Handling the cord on this product or cords associated with accessories sold with this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. IMPORTANT Telephone numbers are subject to change without notice. The most up-to-date telephone list for the Customer Support Center is always available at http://support.lenovo.com/serviceproviders. IMPORTANT Lenovo Smartphone Products do not have International Warranty Services. “”         Legal notices Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. XXXXXXXX Printed in China First Edition (December 2015) © Copyright Lenovo 2015.

Read this guide carefully before using your smartphone. Quick Start Guide Lenovo A2010 Type: CMOS Pixels: 5.0 megapixels (back) + 2.0 megapixels (front) Processor: MTK MT6735m , Quad Core, 1.0 GHz Battery: 2000 mAh Model and system Display Battery Processor Dimensions and weight Camera Wireless Communication Depending on the measuring method, the dimensions and weight might vary slightly. Model: Lenovo A2010-l Height: 130.5 mm (5.14 inches) Depth: 9.98 mm (0.39 inches) Width: 66.6 mm (2.62 inches) Weight: 137 g (0.30 lb) System: Android Size: 114.3 mm4.5 inches Screen: two-touch Resolution: 854 × 480 pixels LCD type: TN Bluetooth 4.0; WLAN 802.11 b/g/n; FDD-LTE, WCDMA, GSM; GPS Technical specications AC/DC adapter Input: 100-240 Vac 50/60 Hz 0.13 A Output: 5.0 Vdc 1.0 A 12 3 4 5 6 78 9 1011 12 13 14 Volume buttons 3 Front-facing camera 1 Receiver 2 Microphone 6 On/Off button 4 Touch screen 5 Menu button 9 Back button 7 Home button 8 Speaker 13 14 Flashlight Rear-facing camera 12 Headset connector 10 Micro USB connector 11 Width: 66.6 mm (2.62 inches) Weight: 137 g (0.30 lb) First glance You must insert the SIM card provided by your carrier to use cellular services. Set up your smartphone as shown. Step 1. Open the back cover. Step 2. Insert the SIM card and the memory card. Step 3. Install the battery. a. Align the battery connectors on the battery with the pins in the battery compartment. b. Push the battery down into place. Step 4. Install the back cover. Always turn off your smartphone rst before you insert or remove a SIM card. Insert or remove a SIM card with your smartphone on may damage your SIM card or smartphone permanently. SIM1 SIM1 Preparing your smartphone Turning on or turning off your smartphone Turn on: Press and hold the On/Off button until the Lenovo logo appears. Tur n of f : Press and hold the On/Off button for a few seconds, then tap Power off Your smartphone has a rechargeable battery. For more information about battery safety, see the “Rechargeable battery notice” in the Important Product Information Guide shipped with your smartphone. Low battery powerFully chargedCharging 2 1 Charge the battery as shown. Method 1. Method 2. Connect your smartphone to a power outlet using the cable and USB power adapter that come with your smartphone. Connect your smartphone to a computer using the cable that comes with your smartphone. Charging the battery XXXXXXXXXX Printed in China First Edition (October 2015) © Copyright Lenovo 2015. Learning more Legal notices Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. To learn more information about your Lenovo smartphone and obtain the latest smartphone manuals, go to: http://support.lenovo.com/. Getting support For support on network service and billing, contact your wireless network operator. For instructions on how to use your device, go to: http://support.lenovo.com/. Turning on or turning off your smartphone Turn on: Press and hold the On/Off button until the Lenovo logo appears. Tur n of f : Press and hold the On/Off button for a few seconds, then tap Power off Your smartphone has a rechargeable battery. For more information about battery safety, see the “Rechargeable battery notice” in the Important Product Information Guide shipped with your smartphone. You must insert the SIM card provided by your carrier to use cellular services. Set up your smartphone as shown. Step 1. Open the back cover. Step 2. Insert the SIM card and the memory card. Step 3. Install the battery. a. Align the battery connectors on the battery with the pins in the battery compartment. b. Push the battery down into place. Step 4. Install the back cover. Always turn off your smartphone rst before you insert or remove a SIM card. Insert or remove a SIM card with your smartphone on may damage your SIM card or smartphone permanently. Low battery powerFully chargedCharging 2 1 Charge the battery as shown. Method 1. Method 2. Connect your smartphone to a power outlet using the cable and USB power adapter that come with your smartphone. Connect your smartphone to a computer using the cable that comes with your smartphone. 12 3 4 5 6 78 9 1011 12 13 14 Volume buttons 3 Front-facing camera 1 Receiver 2 Microphone 6 On/Off button 4 Touch screen 5 Menu button 9 Back button 7 Home button 8 Speaker 13 14 Flashlight Rear-facing camera 12 Headset connector 10 Micro USB connector 11 SIM1 SIM1 Type: CMOS Pixels: 5.0 megapixels (back) + 2.0 megapixels (front) Processor: MTK MT6735m , Quad Core, 1.0 GHz Battery: 2000 mAh Model and system Display Battery Processor Dimensions and weight Camera Wireless Communication Depending on the measuring method, the dimensions and weight might vary slightly. Model: Lenovo A2010-l Height: 130.5 mm (5.14 inches) Depth: 9.98 mm (0.39 inches) Width: 66.6 mm (2.62 inches) Weight: 137 g (0.30 lb) System: Android Size: 114.3 mm4.5 inches Screen: two-touch Resolution: 854 × 480 pixels LCD type: TN Bluetooth 4.0; WLAN 802.11 b/g/n; FDD-LTE, WCDMA, GSM; GPS Charging the battery Preparing your smartphone First glance Technical specications AC/DC adapter Input: 100-240 Vac 50/60 Hz 0.13 A Output: 5.0 Vdc 1.0 A XXXXXXXXXX Printed in China First Edition (October 2015) © Copyright Lenovo 2015. Learning more Legal notices Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both. Other company, product, or service names may be trademarks or service marks of others. To learn more information about your Lenovo smartphone and obtain the latest smartphone manuals, go to: http://support.lenovo.com/. Getting support For support on network service and billing, contact your wireless network operator. For instructions on how to use your device, go to: http://support.lenovo.com/. Read this guide carefully before using your smartphone. Quick Start Guide Lenovo A2010 pantone 424cpantone…

Text truncated - open the document above for the full version.

Report No.: 150519C09 1 of 16 CONSTRUCTION PHOTOS OF EUT Report No.: 150519C09 2 of 16 Report No.: 150519C09 3 of 16

Part Number Modelo:Lenovo A2010-l Teléfono móvil Lenovo Fabricado por Lenovo PC HK Limited Hecho en China 5V 1A Part Number Modelo:Lenovo A2010-l Teléfono móvil Lenovo Fabricado por Lenovo PC HK Limited Hecho en China 5V 1A FCC ID:YCNA2010-L FCC ID:YCNA2010-L

Report No.: 150519C09 4 of 16 Report No.: 150519C09 5 of 16 Report No.: 150519C09 6 of 16 Report No.: 150519C09 7 of 16 Report No.: 150519C09 8 of 16 Report No.: 150519C09 9 of 16 Report No.: 150519C09 10 of 16 Report No.: 150519C09 11 of 16 Report No.: 150519C09 12 of 16 Report No.: 150519C09 13 of 16 Report No.: 150519C09 14 of 16 Report No.: 150519C09 15 of 16 Report No.: 150519C09 16 of 16

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 53 Report No. : SA150519C09 Issued Date : Jun. 16, 2015 FCC SAR Test Report Report No. : SA150519C09 Applicant : Lenovo Mobile Communication Technology Ltd. Address : No.999, Qishan North 2nd Road, Information & Optoelectronics Park, Torch Hi-tech Industry Development Zone, Xiamen, P.R.China Product : Lenovo Mobile Phone FCC ID : YCNA2010-L Brand : lenovo Model No. : Lenovo A2010-l Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 865664 D02 v01r01 KDB 248227 D01 v02r01 / KDB 447498 D01 v05r02 / KDB 648474 D04 v01r02 / KDB 941225 D01 v03 / KDB 941225 D05 v02r03 / KDB 941225 D06 v02 Sample Received Date : May 19, 2015 Date of Testing : May 26, 2015 ~ Jun. 14, 2015 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Gina Liu / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 53 Report No. : SA150519C09 Issued Date : Jun. 16, 2015 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 …

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Jun. 16, 2015 Report No. : SA150519C09 Appendix C. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows.

Report No.: RF150519C09B-5 1 of 46 Report Format Version 5.1.0 Reference No.: 150529C25 FCC TEST REPORT REPORT NO.: RF150519C09B-5 MODEL NO.: Lenovo A2010-l FCC ID: YCNA2010-L RECEIVED: May 29, 2015 TESTED: Jun. 09, 2015 ~ Jun. 16, 2015 ISSUED: Jun. 18, 2015 APPLICANT: Lenovo Mobile Communication Technology Ltd. ADDRESS: No.999, Qishan North 2nd Road, Information & Optoelectronics Park, Torch Hi-tech Industry Development Zone, Xiamen, P.R.China ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150519C09B-5 2 of 46 Report Format Version 5.1.0 Reference No.: 150529C25 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION ..................................................................................................................................5 2. SUMMARY OF TEST RESULTS .........................................................................................................6 2.1 MEASUREMENT UNCERTAINTY...............................................................................................6 3. GENERAL INFORMATION ..................................................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................7 3.2 DESCRIPTION OF TEST MODES ..............................................................................................9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................. 10 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 12 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................... 12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 12 4. TEST TYPES AND RESULTS (FOR BLUETOOTH EDR) ............................................................... 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................... 13 4.1.2 TEST INSTRUMENTS ................................................................................................. 14 4.1.3 TEST PROCEDURES ................................................................................................. 15 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 15 4.1.5 TEST SETUP ............................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS ................................................................................ 16 4.1.7 TEST RESULTS........................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 23 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 23 4.2.2 TEST INSTRUMENTS ................................................................................................. 23 4.2.3 TEST PROCEDURES ................................................................................................. 24 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................... 24 4.2.5 TEST SETUP ............................................................................................................... 25 4.2.6 EUT OPERATING CONDITIONS ................................................................................ 25 4.2.7 TEST RESULTS........................................................................................................... 26 4.3 NUMBER OF HOPPING FREQUENCY USED ........................................................................ 28 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................. 28 4.3.2 TEST SETUP ............................................................................................................... 28 4.3.3 TEST INSTRUMENTS ..............................................................…

Text truncated - open the document above for the full version.

Report No.: RF150519C09B-6 1 of 38 Report Format Version 5.1.0 Reference No.: 150529C25 FCC TEST REPORT REPORT NO.: RF150519C09B-6 MODEL NO.: Lenovo A2010-l FCC ID: YCNA2010-L RECEIVED: May 29, 2015 TESTED: Jun. 09, 2015 ~ Jun. 16, 2015 ISSUED: Jun. 18, 2015 APPLICANT: Lenovo Mobile Communication Technology Ltd. ADDRESS: No.999, Qishan North 2nd Road, Information & Optoelectronics Park, Torch Hi-tech Industry Development Zone, Xiamen, P.R.China ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150519C09B-6 2 of 38 Report Format Version 5.1.0 Reference No.: 150529C25 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION ..................................................................................................................................5 2. SUMMARY OF TEST RESULTS .........................................................................................................6 2.1 MEASUREMENT UNCERTAINTY...............................................................................................6 3. GENERAL INFORMATION ..................................................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................7 3.2 DESCRIPTION OF TEST MODES ..............................................................................................9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .............................. 10 3.3 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 12 4. TEST TYPES AND RESULTS (FOR BLUETOOTH LE 4.0) ............................................................. 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................... 13 4.1.2 TEST INSTRUMENTS ................................................................................................. 14 4.1.3 TEST PROCEDURES ................................................................................................. 15 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 15 4.1.5 TEST SETUP ............................................................................................................... 16 4.1.6 EUT OPERATING CONDITIONS ................................................................................ 16 4.1.7 TEST RESULTS........................................................................................................... 17 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 23 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 23 4.2.2 T EST INSTRUMENTS ................................................................................................ 23 4.2.3 TEST PROCEDURES ................................................................................................. 24 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................... 24 4.2.5 TEST SETUP ............................................................................................................... 24 4.2.6 EUT OPERATING CONDITIONS ................................................................................ 24 4.2.7 TEST RESULTS........................................................................................................... 25 4.3 6dB BANDWIDTH MEASUREMENT ....................................................................................... 27 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................................ 27 4.3.2 TEST SETUP ............................................................................................................... 27 4.3.3 TEST INSTRUMENTS ........................................................…

Text truncated - open the document above for the full version.

Report No.: RF150519C09B-4 1 of 60 Report Format Version 5.2.1 Reference No.: 150529C25 FCC TEST REPORT (15.247) REPORT NO.: RF150519C09B-4 MODEL NO.: Lenovo A2010-l FCC ID: YCNA2010-L RECEIVED: May 29, 2015 TESTED: Jun. 09, 2015 ~ Jun. 16, 2015 ISSUED: Jun. 18, 2015 APPLICANT: Lenovo Mobile Communication Technology Ltd. ADDRESS: No.999, Qishan North 2nd Road, Information & Optoelectronics Park, Torch Hi-tech Industry Development Zone, Xiamen, P.R.China ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150519C09B-4 2 of 60 Report Format Version 5.2.1 Reference No.: 150529C25 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION ..................................................................................................................................5 2. SUMMARY OF TEST RESULTS .........................................................................................................6 2.1 MEASUREMENT UNCERTAINTY...............................................................................................6 3. GENERAL INFORMATION ..................................................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................7 3.2 DESCRIPTION OF TEST MODES .............................................................…

Text truncated - open the document above for the full version.