YGS-7230EasyTalk AutoTrak 2.0 Wireless Audio Interface

©2012 Vaddio - All Rights Reserved. AutoTrak 2.0 with EasyTalk Wireless Audio Interface - Document Number 342-0382 Rev. A VADDIO™ AUTOTRAK 2.0 Camera Tracking System Featuring Automatic Pan/Tilt/Zoom Camera Tracking Part Numbers: AutoTrak 2.0 Camera Tracking System: North America 999-7250-000: AutoTrak 2.0-Dual HD-18 Kit with Quick-Connect DVI/HDMI Interface-North America 999-7260-000: AutoTrak 2.0-HD-18 & HD-20 Kit with Quick-Connect DVI/HDMI Interface-North America AutoTrak 2.0 Camera Tracking System: International 999-7250-001: AutoTrak 2.0-Dual HD-18 Kit with Quick-Connect DVI/HDMI Interface-International 999-7260-001: AutoTrak 2.0-HD-18 & HD-20 Kit with Quick-Connect DVI/HDMI Interface-International Optional: EasyTalk AutoTrak 2.0 Wireless Audio Interface: 998-7230-000: EasyTalk AutoTrak 2.0 Wireless Audio Interface-North America 998-7230-001: EasyTalk AutoTrak 2.0 Wireless Audio Interface- International INSTALLATION AND USERS GUIDE SHORT TERM CONFIDENTIAL AutoTrak 2.0 Camera Tracking System ©2012 Vaddio - All Rights Reserved. AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. A Page 2 of 47 Inside Front Cover - Blank SHORT TERM CONFIDENTIAL AutoTrak 2.0 Camera Tracking System ©2012 Vaddio - All Rights Reserved. AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. A Page 3 of 47 AutoTrak 2.0 System Overview The AutoTrak 2.0 System is an IR tracking system that consists of an IR lanyard attached to a rechargeable belt pack that is worn by a presenter or instructor. Within the lanyard’s cloth cover, there are fifteen (15) 850nm wavelength IR LEDs on a flat flex circuit that emit IR light that is tracked by an HD-18 PTZ IR Reference Camera with special IR filters. The IR position is relayed to the AutoTrak 2.0 CPU which in turn controls the HD-18 PTZ Tracking Camera and follows the presenter and keeps the presenter framed in the camera shot throughout the presentation environment. The Tracking Camera is based on the Vaddio high definition, HD-18 with 1/3-type, 1.3 mega pixel CCD image sensor which operates well in low light and reproduces color accurately with vibrant detail and clarity. Note: Add the two versions: two- HD-18 and one HD-18 and one HD-20 999-7250-000: AutoTrak 2.0-Dual HD-18 Kit with Quick-Connect DVI/HDMI Interface-North America 999-7260-000: AutoTrak 2.0-HD-18 & HD-20 Kit with Quick-Connect DVI/HDMI Interface-North America The AutoTrak 2.0 System is also available with the optional EasyTalk AutoTrak 2.0 Wireless Audio System. The HD-18 cameras and HD-20 cameras use the Vaddio Cat-5e cabling systems for ease of set up and installation. The system can be permanently installed or configured as a cart system for portability and ease of positioning in the largest of lecture halls. Each system includes a dual camera mount which can be wall mounted or mounted on top of the Vaddio Edge series video carts. The optimum operating range or the system (from the IR Lanyard to the IR Reference camera) is between 12’ (3.65m) and up to 40’ (12.2m). System positioning is critical for proper and consistent operation. The AutoTrak 2.0 can be installed as a standalone system or can be used in conjunction with myriad Vaddio Presenter controlled solutions including AutoPresenter™, PresenterPOD™, ControlVIEW XHD™, TouchVIEW™, AutoVIEW™ IR, StepVIEW™ Mats, MicVIEW™ and the Vaddio Video Whiteboard. As an added benefit, once the AutoTrak 2.0 system is configured the Mouse, Keyboard and Monitor I/O devices can be removed from the system to ensure the system isn’t subject to unauthorized modification. Intended Use: Before operating the device, please read the entire manual thoroughly. The system was designed, built and tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the one provided or outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating condition. Important Safeguards: Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions. Use only the power supply provided with the system. Use of any unauthorized power supply will void any and all warranties. Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not work well for professional installations and can be the cause of intermittent connections which can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™ signals. For best results please use standard RJ-45 connectors and test all cables for proper pin-outs prior to use and connection to Vaddio product. AutoTrak 2.0 999-7250-000 Dual HD-18 Cameras AutoTrak 2.0 999-7260-000 HD-18 IR and HD-20 Tracking Camera SHORT TERM CONFIDENTIAL AutoTrak 2.0 Camera Tracking System ©2012 Vaddio - All Rights Reserved. AutoTrak 2.0 Camera Tracking System - Document Number 342-0382 Rev. A Page 4 of 47 Save These Instructions: The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from www.vaddio.com free of charge. UNPACKING: Carefully remove all of the parts for the AutoTrak 2.0 999-7250-000 Dual HD-18 Kit with Quick Connect DVI/HDMI Interface (North America Only) packaging:  One (1) AutoTrak 2.0 CPU (closed system preloaded with AutoTrak 2.0 software and video card)  One (1) AC Cord Set for AutoTrak 2.0 CPU  One (1) PS/2 Keyboard  One (1) PS/2 Mouse  One (1) IR and Audio Lanyard with attached 32” cable with 5-pin mini XLR connector  One (1) Belt Pack Unit “BPU” with 1” RP-SMA straight antenna an…

Text truncated - open the document above for the full version.

TÜV SÜD America Inc. Phone: (651) 638-0297 19333 Wild Mountain Road Fax: (651) 638-0298 Taylor Falls, MN 55084 E-mail: [email protected] www.TUVamerica.com Management Service • Product Service • Industry Service TÜV SÜD AMERICA INC 19333 WILD MOUNTAIN ROAD TAYLORS FALLS, MINNESOTA 55084-1786 ENGINEERING STATEMENT For Certification of Vaddio Wireless Audio Receiver (Transceiver) Model No: 998-7230-000 FCC ID: YGS-7230 FRN: 0019746180 IC: 8934A-7230 I am an Electromagnetic Compatibility Engineer for TÜV SÜD AMERICA INC, Taylors Falls, Minnesota. My education and experience are a matter of record with the Federal Communications Commission. TÜV SÜD AMERICA INC has been authorized by William Fisher, Engineering Manager, of Vaddio, to make Certification measurements of the above mentioned equipment. I attest that all testing done under my supervision was done in accordance with, and that the EUT fulfills the requirements of, the Federal Communications Commission's CFR 47 Part 15,247 and Industry Canada's RSS-210 Issue 8. Joel T. Schneider Senior Engineer Minnesota Wild River Lab TÜV SÜD America Product Service Tel: 651 604 4582 Fax: 651 638 0298 [email protected] Dated: 29 March 2012

EasyTalk AutoTrak 2.0 Wireless Audio Interphase Product Photos Photo 1: Wireless Audio Interface (Front View) Photo 2: Wireless Audio Interface (Rear View) Photo 3: Wireless Audio Interface (Side View) SHORT TERM CONFIDENTIAL Photo 4: Wireless Audio Interface (Top View) Photo 5: Wireless Audio Interface(Bottom View) SHORT TERM CONFIDENTIAL

EasyTalk Docs Page 1 of 1 EasyTalk AutoTrak 2.0 Wireless Audio Interface Product Label Product Label Label Size: 4” W x 1.45 H (stock label) Label must have this specific content: Logo, Address, Product Name, “Model” Number, FCC ID, IC (Industry Canada) ID, Barcode and Serial Number, FCC Mark and Language, CE Mark, Made in USA claim, power supply volt/amp rating and website address. EasyTalk Product Label Position (no scale) Place Label on the top of the receiver approx. ½ from the back and centered between the screws as shown below. Note: Shown with rack ears attached - rack ears will not ship attached. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includin g interference that may cause undesired operation. S/N: 9987230000XXXXXXX000 Vaddio, 9433 Science Center Drive, New Hope, MN 55428 EasyTalk AutoTrak 2.0 Wireless Audio Interface, 12VDC 1.0 Amp Model: 998-7230-000 FCC ID: YGS-7230 IC: 8934 A-7230 Made in the USA www.vaddio.com Label Position & Orientation

Top SHORT TERM CONFIDENTIAL Back SHORT TERM CONFIDENTIAL RF Closeup SHORT TERM CONFIDENTIAL

TÜV SÜD America Inc. Phone: (651) 638-0297 19333 Wild Mountain Road Fax: (651) 638-0298 Taylor Falls, MN 55084 E-mail: [email protected] www.TUVamerica.com Management Service • Product Service • Industry Service 04 April 2012 BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD RE: Declaration of Compliance to RF Exposure Limits for Humans Vaddio transceiver RF Exposure Statement 1. Standard Applicable According to 1.1307 (b)(1) and IC RSS-102, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the published guidelines. This is a portable device operating in 2408-2476 MHz range. 2. Measurement Result: This is a portable device and the ERP is 6.94 x 10 -3 W. This is lower than low threshold 60/f GHz mW (24 mW), d<2.5 cm, general population category. The SAR measurement is not necessary. ATTESTATION: I attest that the radiocommunication apparatus meets the exemption from the routine evaluation limits in Section 2.5 of this standard; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Joel T. Schneider Senior Engineer Minnesota Wild River Lab TÜV SÜD America Tel: 651 604 4582 Fax: 651 638 0298 [email protected]

TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 TEST RESULT SUMMARY FCC Part 15 Subpart C Section 15.247 FCC Part 15 Subpart C Section 15.207 Industry Canada RSS-210 Issue 8 Industry Canada RSS-Gen Issue 3 MANUFACTURER Vaddio 9433 Science Center Drive New Hope MN 55428 DESCRIPTION OF EQUIPMENT 2.4GHz Wireless Audio Receiver (Transceiver) NAME OF EQUIPMENT EasyTalk AutoTrak 2.0 Wireless Audio Receiver MODEL NUMBER(S) TESTED 998-7230-000 SERIAL NUMBER(S) TESTED n/a TEST REPORT NUMBER WC1111680 TEST DATE(S) 16-17 January 2012 TÜV SÜD America Inc, as an independent testing laboratory, declares that the equipment tested as specified above conforms to the applicable requirements of FCC Part 15, Subpart C, Sections 15.247 "Operation within the bands 902- 928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz”, and 15.207 “Conducted limits” and Industry Canada RSS-210 Issue 8 "Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment" and RSS-Gen Issue 3 "General Requirements and Information for the Certification of Radiocommunication Equipment" It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical characteristics. Any modifications necessary for compliance made during testing on the above mentioned date(s) must be implemented in all production units for compliance to be maintained. Date: 13 February 2012 Tested by: Approved by: Location: Taylors Falls MN Greg S Jakubowski Joel T Schneider USA EMC Test Engineer Senior EMC Engineer Not Transferable FCC ID: YGS-7230 IC ID: 8934A-7230 TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 EMC TEST REPORT Test Report No. WC1111680 Date of issue: 13 February 2012 Product Description 2.4GHz Wireless Audio Receiver (Transceiver) Product Name EasyTalk AutoTrak 2.0 Wireless Audio Receiver Model No(s) Tested 998-7230-000 Serial No(s) Tested n/a Manufacturer Vaddio Address 9433 Science Center Drive New Hope MN 55428 Test Result  Positive Negative TÜV SÜD America Inc reports apply only to the specific samples tested under stated test conditions. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. TÜV SÜD America Inc shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD America Inc issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. This report shall not be used by the client to claim product endorsement by NVLAP, NIST, or any agency of the US government. TÜV SÜD America Inc and its professional staff hold government and professional organization certifications and are members of AAMI, ACIL, AEA, ANSI, IEEE, NARTE, and VCCI. Test Report WC11116801 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 REVISION RECORD REVISION TOTAL NUMBER OF PAGES DATE DESCRIPTION 49 13 February 2012 Initial Release Test Report WC11116802 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 TEST REPORT CONTENTS Page(s) Revision Record 2 Directory 3 Test Regulations 4 Environmental Conditions 4 Power Supply 4 Test Equipment Traceability 4 Test Information Emission Bandwidth (EBW) FCC §15.247(a)(2), IC RSS 210 A8.2(a) 5 - 8 Fundamental Emission Output Power FCC §15.247(b)(3), IC RSS-210 A8.4(4) 9 - 12 Maximum Power Spectral Density FCC §15.247(e), IC RSS-210 A8.2(b) 13 - 16 Maximum Unwanted Emission Levels FCC §15.247(d), IC RSS-210 A8.5 17 - 28 Occupied bandwidth IC RSS-GEN 4.6.1 29 Conducted limits – AC lines FCC §15.207(a), RSS-Gen 7.2.4 30 - 31 Test-setup Photos 32 - 37 Equipment Under Test Information 38 General Remarks, Deviations, Summary 39 Appendix A Constructional Data Form 40 - 47 Appendix B Measurement Protocol 48 - 49 Test Report WC11116803 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 EMC TEST REGULATIONS: The tests were performed according to the following regulations: - FCC Part 15 Subpart C Section 15.247 Paragraphs (a)(2), (b)(3), (d), (e) - FCC Part 15 Subpart C Section 15.207 Paragraphs (a) - Industry Canada RSS-210 Issue 8, Sections A8.2(a), A8.4(4), A8.5, A8.2(b), A9.2, A9.3 - Industry Canada RSS-Gen Issue 3 Sections 4.6.1, 7.2.4 ENVIRONMENTAL CONDITIONS IN THE LAB Actual Temperature: : 15°C Atmospheric pressure : 98-99 kPa Relative Humidity : 19-26% POWER SUPPLY UTILIZED Power supply system : 110V / 60Hz – 1 phase TEST EQUIPMENT All measurement instrumentation is traceable to the National Institute of Standards and Technology and is calibrated according to internal procedure. SIGN EXPLANATIONS  - not applicable  - applicable. Test Report WC11116804 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 Emission Bandwidth (EBW) FCC 15.247(a)(2), IC RSS-210 A8.2(a) Test summary The requirements are:  - MET  - NOT MET Testing was performed in accordance with the test procedure of FCC KDB Publication 558074 The minimum 6 dB EBW = 2.07 MHz Test location  - Wild River Lab Large Test Site (Open Area Test Site)  - Wild River Lab Small Test Site (Open Area Test Site)  - Wild River Lab Tech Area, conducted measurement Test equipment TUV ID Model Manufacturer Description Serial Cal Due WRLE10435 E4440A Agilent Spectrum Analyzer MY44304…

Text truncated - open the document above for the full version.

TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 Test-setup photo(s): Radiated measurements Test Report WC111168032 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 SHORT TERM CONFIDENTIAL TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 Test-setup photo(s): Radiated measurements Test Report WC111168033 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 SHORT TERM CONFIDENTIAL TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 Test-setup photo(s): Radiated measurements Test Report WC111168034 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 SHORT TERM CONFIDENTIAL TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 Test-setup photo(s): Radiated measurements Test Report WC111168035 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 SHORT TERM CONFIDENTIAL TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 Test-setup photo(s): Conducted measurements – AC lines Test Report WC111168036 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 SHORT TERM CONFIDENTIAL TÜV SÜD AMERICA INC19333 Wild Mountain Road Taylors Falls MN 55084-1786 Tel: 651 638 0297 Fax: 651 638 0298 Rev. 080408 Test-setup photo(s): Conducted measurements – AC lines Test Report WC111168037 of 49 FCC ID: YGS-7230 IC ID: 8934A-7230 SHORT TERM CONFIDENTIAL