YHLBLU96GCSmart Phone

BLU Products, Inc. 8600 NW 36th Street, Suite #300 Miami, FL 33166, Doral Florida 33166, United States Rev 2026-04-24 Date: 2026-08-03 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) and Part 2.911(d)(5)(ii) FCC ID: YHLBLU96GC Part 2.911(d)(5)(i) BLU Products, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment and does not contain anti-virus software or cybersecurity software prohibited from receiving an equipment authorization pursuant to 47 CFR 2.903, KDB 986446 D01 Covered Equipment Guidance, and FCC Covered List (www.fcc.gov/supplychain/coveredlist). Part 2.911(d)(5)(ii) BLU Products, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signatory [Wei Zeng, Senior Manager]

BLU Products, Inc. 8600 NW 36th Street, Suite #300 Miami, FL 33166, Doral Florida 33166, United States Rev 1/26/2023 Date: 2026-08-03 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: YHLBLU96GC Applicant FRN: 0019890946 BLU Products, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, BLU Products, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. BLU Products, Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. BLU Products, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: BLU Products, Inc. U.S. Agent FRN: 0019890946 Address: 8600 NW 36th Street, Suite #300 Miami, FL 33166, Doral Florida 33166, United States Contact Person: Wei Zeng Tel.: 3057157171 Email: [email protected] Sincerely, BLU Products, Inc. BLU Products, Inc. Wei Zeng Wei Zeng Signature: Signature:

BLU Products, Inc. 8600 NW 36th Street, Suite #300 Miami, FL 33166, Doral Florida 33166, United States Date: 2026-08-03 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: YHLBLU96GC Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. ☒ Block Diagram ☒ Tune-Up Information ☒ Operational Description ☒ Security Information ☒ Schematics ☐ Software Defined Radio (SDR) Information ☒ Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ☒ External Photos ☒ Test Setup Photos ☒ Internal Photos ☒ User Manual ☐ For 45 days, pursuant to Public Notice DA 04-1705. or ☒ For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory [Wei Zeng, Senior Manager]

BLU Products, Inc. 8600 NW 36th Street, Suite #300 Miami, FL 33166, Doral Florida 33166, United States Date: 2026-08-03 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: YHLBLU96GC POWER OF ATTORNEY To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, BLU Products, Inc. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory [Wei Zeng, Senior Manager]

Reference No.: WTX26X06185900W001/002/003/004/005/006/007/008/009 Page 1 of 17 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Page: 1/10 Ref : ACR.78.6.26.PAR.B Cancel and replace the report ACR.78.6.26.PAR.A WALTEK TESTING GROUP (SHENZHEN) CO., LTD 1/F., ROOM 101, BUILDING 1, HONGWEI INDUSTRIAL PARK, LIUXIAN 2ND ROAD, BLOCK 70 BAO'AN DISTRICT, SHENZHEN, GUANGDONG, 518101 CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 0725-EPGO-446 Calibrated at MVG 13 Rue du Zephyr 91140 Villejust - FRANCE Calibration date: 03/03/2026 Scope available on :https://a2la.org/ Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMO SAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 2/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 3/18/2026 Checked & approved by: Pedro Ruiz Technical Manager 3/18/2026 Authorized by: Christophe Barrot Quality Manager Customer Name Distribution : WALTEK TESTING GROUP (SHENZHEN) CO., LTD Issue Name Date Modifications A Pedro Ruiz 3/18/2026 Initial release B Pedro Ruiz 04/10/2026 Update customer address 
 

         

 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 4 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment ...................................................................................................... 9 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 0725-EPGO-446 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.248 M: Dipole 2: R2= 0.216 M: Dipole 3: R3=0.231 M: 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. 3.2 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 5/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 29 TEST REPORT Reference No. ................... : WTX26X06185900W009 FCC ID ............................... : YHLBLU96GC Applicant .......................... : BLU Products, Inc. Address ............................ : 8600 NW 36th Street, Suite #300 | Miami, FL 33166, USA Manufacturer .................... : The same as Applicant Address ............................ : The same as Applicant Product Name .................. : Smart Phone Model No. .......................... : G96 Standards ......................... : 47 CFR FCC Part 15, Subpart B Date of Receipt sample ... : 2026-06-26 Date of Test....................... : 2026-07-01 to 2026-07-23 Date of Issue .................... : 2026-07-27 Test Report Form No. ...... : WTX_FCC PART15B_001 Test Result ........................ : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Dashan Chen/Project Engineer Jason Su/Manager Reference No.: WTX26X06185900W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 29 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................... 5 1.3 TEST METHODOLOGY ............................................................................................................................................. 5 1.4 TEST FACILITY ....................................................................................................................................................... 5 1.5 EUT SETUP AND OPERATION MODE ...................................................................................................................... 6 1.6 MEASUREMENT UNCERTAINTY .............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 11 3. CONDUCTED EMISSIONS .................................................................................................................................. 12 3.1 TEST PROCEDURE ................................................................................................................................................. 12 3.2 BASIC TEST SETUP BLOCK DIAGRAM ................................................................................................................... 12 3.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 12 3.4 SUMMARY OF TEST RESULTS ............................................................................................................................... 12 4. RADIATED EMISSION ......................................................................................................................................... 15 4.1 TEST PROCEDURE ................................................................................................................................................. 15 4.2 BLOCK DIAGRAM OF TEST SETUP ........................................................................................................................ 15 4.3 TEST RECEIVER SETUP ......................................................................................................................................... 16 4.4 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................ 16 4.5 ENVIRONMENTAL CONDITIONS ............................................................................................................................ 16 4.6 SUMMARY OF TEST RESULTS ............................................................................................................................... 16 APPENDIX PHOTOGRAPHS ................................................................................................................................... 29 Reference No.: WTX26X06185900W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 3 of 29 Report version Version No. Date of issue Description Rev.00 2026-07-27 Original / / / Reference No.: WTX26X06185900W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 4 of 29 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) General Description of EUT Product Name: Smart Phone Trade Name: BLU Model No.: G96 Adding Model(s): / Note: The sample information is provided by the customer. Technical Characteristics of EUT Rated Voltage: Battery:DC3.87V Type-C:DC5V Battery Capacity: C1016656700P Rated: 6830mAh 26.44Wh, Typical: 7000mAh 27.09Wh Rated Power: / Power Adapter Model: US-BJ-1825Q Input:AC100-240V 50/60Hz 0.5A Output:DC5V3A/9V2A/12V1.5A Lowest Internal Frequency: / Highest Internal Frequency: 5825MHz Classification of ITE:…

Text truncated - open the document above for the full version.