YJZ73200675Wireless Sensor Adaptor

SafePresence Hook-Up Wireless Link Product Manual & Warranty Contents Safety Instructions 2 Product Overview 4 Product Diagrams and Functions 4 Connecting to the Call System 5 Setting up the SafePresence Hook-Up Wireless Link 6 Programming the transmitter to the receiver 6 Deleting a memory ID 7 Notes for bedside pads 7 Troubleshooting 8 Specifications 8 Warranty 9 Before Using the SafePresence Hook-Up Wireless Link Be sure to read this manual thoroughly before use and to keep this manual in a safe place for future reference. The SafePresence Hook-Up Wireless Link is designed to assist a caregiver in monitoring another person. It is not a substitute for watchfulness over individuals who may be at risk of injury from falls. Additional interventions may be required. Safety Instructions Before using, please be sure to read this safety manual carefully. Product specifications described in this material are subject to change without notice. Hazard definitions The following terms are used throughout this manual to bring attention to the presence of hazards and various risk levels, or to important information concerning the use of this product. Warning Caution Indicates an imminently hazardous situation which, if not avoided, may result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in injury or property damage. * “Caution” indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Example of Hazard Indicators Caution including warning Important precautions Must follow the instruction Warning IMPORTANT SAFETY INSTRUCTIONS Unplug the SafePresence Hook-Up Wireless Link from the AC power and refer servicing to qualified service personnel under the following conditions.
In case of any abnormality such as smoke, hot smell or unusual noise; or
If water or any other liquid is spilled into or onto the SafePresence Hook-Up Wireless Link; or
If power socket or cord is extremely hot; or
If the SafePresence Hook-Up Wireless Link has been dropped or damaged. Do not disassemble or alter the product Do not attempt to disassemble or alter the product. It may cause fire and electric shock. Contact your distributor for inspection, adjustment and repair. Keep Dry Keep this product dry and away from water or other liquids. Failure to keep dry may result an electric shock. 2 Precautions when using the AC adapter
If the provided plug does not fit into your outlet, do not use and contact your distributor for further information.
Do not bundle the AC power cord.
If a power strip or extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord or power strip do not exceed the extension cord/power strip’s ampere rating. Do not tamper with the AC adapter cord Follow the instructions below; failure to do so may damage the cord. Operate this product only with the specified voltage Use the SafePresence Hook-Up Wireless Link with the speci ed voltage (AC 110V). Failure to do so may cause a re or an electric shock.
Do not put heavy items on the cord.
Do not modify the cord.
Do not forcefully bend the cord.
Do not use the cord if damaged.
Do not twist or pull the cord.
Do not put close to heating materials. Ask your distributor for an exchange if the AC adapter cord is damaged. Failure to do so may result in fire or electic shock. Keep dry at all times If water/liquid spills or enters the product, it may cause a fire or an electric shock. Inspect the plug and the AC power outlet regularly Remove the dust and dirt between the plug and the outlet regularly. Failure to do so may result in short circuit and fire.

















The normal operation of this product may be disrupted by electro magnetic interference. If this occurs, please reset the product to resume normal operation by following directions in the instruction manual. If the product does not resume normal operation, please relocate the source of the interference or use the product in a different location. Handle the AC adapter with caution Do not place heavy objects on top of the SafePresence Hook-Up Wireless Link.
Do not plug in or unplug the adapter with wet hands. It may cause an electric shock.
Never pull on the cord when unplugging from the electrical outlet. Always grasp the AC cord plug when unplugging. Do not use the product with an electrical blanket or other electrical items This may cause a damage to the product or an electric shock. Set up precautions
Avoid use in an excessively humid, dusty or steamy area.
Avoid direct sunlight.
The socket-outlet should be easily accessible and located near the equipment. Rechargeable Battery Cautions Follow the instructions below. Failure to do so may cause the battery to leak or explode, which may lead to fire or injury.
Use the specified rechargeable battery only. Replacing the battery with an incorrect type of battery may cause an explosion.
Never disassemble the battery.
Non-rechargeable batteries must not be recharged.
Remove the batteries when not using the device for an extended period of time. Battery disposal warning
Never dispose of any battery by fire.
All batteries should be disposed of in accordance with applicable local laws.
Dispose of used batteries according to the instructions. Do not set up on an unstable surface When not in use For your safety, unplug the AC adapter from the outlet. 3 4            



       

This product is used to wirelessly connect various sensors to the call system. Features: • Up to three transmitters can be programmed to a receiver. • Receiver can be set up to make an alarm sound upon detecting an alarm call. *Alarm sound is turned off when it is shipped from the factory.            



  

    

   

 …

Text truncated - open the document above for the full version.

Label Location

Internal Photo Inner Circuit Top View Inner Circuit Bottom View Internal View of the product Antenna

TEST REPORT No.: (5210)264-0484 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 1 of 21 TEST REPORT No.: (5210)264-0484 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 2 of 21 Location of the test laboratory Radiated and Conducted emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 2003. An Open Area Test Site and Full Anechoic Chamber (FCC Listed Site, Registration No. 642151) are set up for investigation and located at : BUREAU VERITAS HONG KONG LIMITED, EMC CENTRE No. 2106-2107, 21/F., Westin Centre, 26 Hung To Road, Kwun Tong, Kowloon, Hong Kong List of measuring equipment Radiated Emission EQUIPMENT MANUFACTURER MODEL NO. SERIAL NO. CALIBRATION DUE EMI TEST RECEIVER R&S ESCI 100379 06-SEP-2011 BILOG ANTENNA SCHAFFNER CBL6112D 25229 02-AUG-2011 OPEN AREA TEST SITE BVCPS N/A N/A 05-JULY-2011 ANECHOIC CHAMBER ALBATROSS M-CDC 80374004499B 06-JULY-2011 HORN ANTENNA SCHWARZBECK BBHA9120D 9120D-692 20-JULY-2011 PREAMPLIFIER SCHWARZBECK BBV9718 9718-152 26-JULY-2011 COAXIAL CABLE SUHNER N/A N/A 07-DEC-2010 Remarks:- N/A : Not Applicable or Not Available The measurement instrumentation uncertainty would be taking into consideration on each of the test result TEST REPORT No.: (5210)264-0484 BUREAU VERITAS HONG KONG LIMITED – Kowloon Bay Office 1/F Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon,HONG KONG Tel: +852 2331 0888 Fax: +852 2331 0889 www.cps.bureauveritas.com This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request additional testing of the samples or to notify us of any errors or omissions relating to our report, provided, however, such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Page 3 of 21 Equipment Under Test [EUT] Description of Sample: Model Name: SafePresence Hook-Up Wireless Link Model Number: TXB Additional Model Number: TXF Additional Model Information: Declare the Circuit, PCB layout and Electrical parts of the products are identical to the basic model, except the connector and connection device. TXB: Transmitter for Bed Sensor TXF: Transmitter for Floor Mat Rating: 3Vd.c (“CR2032” size battery x 1) Description of EUT Operation: The Equipment Under Test (EUT) is a J. BRASCH CO. of Remote Control Transmitter. It is a one-connector transmitter and operating at 2410MHz to 2466MHz. The connector is connecting with Bed Sensor and the EUT continues to transmit while sensor is being pressed. It is using FHSS, total 8 channels, and Modulation by IC, type is pulse modulation. The lowest, middle & highest frequency had tested and the results are shown in the report. The transmitter has different control: 1. Connector – Sensor detection, control transm…

Text truncated - open the document above for the full version.

Test Set Up Photo