YKO-WK-9900AIR-LOCK WK-9900 NETWORK STABALIZER MODULE BOOSTER

Airgoon L TD. 2207 Concord Pike Unit 700 Wilmington, DE 19803-2908 PH: (888) 728-6330 FAX: (888) 728-6322 November 17 th 2011 Model: Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module Introduction Manual. The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module is the world’s only Intelligent Network Stabilizer Module for simple plug and play operation. It is the only module on the market today that will exceed the specifications of today and beyond current 4G protocols. The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module has been engineered to keep pace with the Network Operator’s future developments in technologies thereby removing the fear of obsolescence. Built in a compact package size just measuring (LxWxH) 50.8 mm. x 50.8 mm. x 12.7 mm., it provides for a simple integration or along side other devices. The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer has been designed and manufactured for enhancing, extending or maintaining a constant signal for better performance without impacting the Carrier’s Networks. The Air Lock WK 9900 is available for use on all 850/1900 MHz networks with the following: 700 MHz, 1700 MHz, 2100 MHz and 2.5 GHz. Frequency Bands being released in the Q1 2012. FCC/IC Regulatory Information Important notice We, Airgoon LTD 2207 Concord Pike, Suite 700, Wilmington, Delaware 19803 declare that the Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module complies with Parts 22H and 24E of the FCC CFR47 Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare but they do occur when wireless devices such as the Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module are used. The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Airgoon and its affiliates accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module Network Stabilizer, or for failure of the Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module to transmit or receive such data. Confidential and Proprietary Information “Not to be Disseminated”. Page 1 of 5 . Forever Evolving Today’s Technologies Airgoon L TD. 2207 Concord Pike Unit 700 Wilmington, DE 19803-2908 PH: (888) 728-6330 FAX: (888) 728-6322 November 17 th 2011 Model: Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module has been granted approval for mobile and fixed applications. If using the Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module within other products additional FCC/IC (Industry Canada) certification may or may not be needed if they meet the following conditions; In a mobile environment at least 25.4 cm separation distance between the outdoor antenna and the user’s body and at least 20.32 cm separation between the antenna and the user’s body must be maintained at all times. In a building structure environment at least 50.8cm separation distance between the outdoor antenna and the user’s body and at least 38.1 cm separation distance between the outdoor antenna and the user’s body must be maintained at all times. When using the Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module, use of any antenna gain higher than 15.12 dBi using is in violation of FCC regulations, for which the offender is fully liable. Failure of the end-user to comply with the applicable requirements may result in the unlawful operation and adverse action against the end-user by the applicable National Regulatory Authority. This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all Applicable Regulatory Certifications and Approvals. If using the Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module within another device a label must be affixed to the outside of the end product into which is incorporated, with a statement similar to the following: This device contains FCC ID: --------- and IC ID: ---------- The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module ID: IC------- where ID: IC------- is the Airgoon Network Stabilizer’s certification number. A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / IC RF Exposure Guidelines. The end product with an the Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module may also need to pass the FCC Parts 22H and 24E Unintentional Emission Testing Requirements and be properly authorized by the FCC. Confidential and Proprietary Information “Not to be Disseminated”. Page 2 of 5. Forever Evolving Today’s Technologies Airgoon L TD. 2207 Concord Pike Unit 700 Wilmington, DE 19803-2908 PH: (888) 728-6330 FAX: (888) 728-6322 November 17 th 2011 Model: Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module Installation Instructions Placement of the Antennae is very important, as the Antennae location may affect the RF performance. The Airgoon Air-Lock WK 9900 Wireless Network Stabilizer Module is shielded to prevent network interference, however careful consideration must be made when deciding where to place the antennae. Note: AIRGOON CANNOT GUARENTEE OTHER MANUFACTUERS PRODUCTS, THE USE OF ANY OTHER ANTENNAE OTHER THAN AIR…

Text truncated - open the document above for the full version.

Airgoon LTD. 2207 Concord Pike Unit 700 Wilmington, DE 19803-2908 PH: (888) 728-6330 FAX: (888) 728-6322 Forever Evolving Today’s Technologies Attestation for FCC Declaration of Conformity. Brand: Airgoon LTD Model Number: Air-Lock WK 8800 Date: May 11th, 2012 FCC ID: YKO-WK-8800 ATTESTATION STATEMENT. § 22.383 In-building radiation systems. Licensees may install and operate in-building radiation systems without applying for authorization or notifying the FCC, provided that the locations of the in-building radiation systems are within the protected service area of the licensee's authorized transmitter(s) on the same channel or channel block. Please be notified that we, Airgoon LTD, declares that the product which bears the above FCC ID is also compliant with the FCC Requirements for DoC. Sincerely Yours, Q Mr. Robert K Skilton VP R & D Engineering [email protected] Page 1 of 1.

April 25, 2012 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Road Columbia, MD 21046‐1609 Subject: Request for Confidentiality FCC ID : YKO‐WK‐9900 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CRF § 0.457, 0.459), Airgoon, LTD. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. PERMANENT CONFIDENTIALITY Airgoon, LTD. requests that the Commission withholds the following documents from public viewing indefinitely: ● Block Diagrams ● Technical Description ● Main Board Schematic ● Main Board Bill of Materials ● Antenna Specifications, Gail and Patterns ● Tune-up Procedure ● Internal Photos w/out shields ● Internal Photos with shields ● PCB Layer drawings These documents reveal detailed technical and design information that is protected by Airgoon, LTD. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Airgoon, LTD. by giving competitors an unfair advantage even after commercial release of the device. SHORT TERM CONFIDENTIALITY In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Airgoon LTD. requests that the Commission withholds the following documents from public viewing for sixty days after the date the grant of equipment authorization is issued: ● Test Setup Photographs These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Airgoon LTD. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Airgoon Inc by giving competitors an unfair market advantage. Airgoon LTD. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Robert Skilton Airgoon LTD. 2207 Concord Pike, Suite 700, Wilmington, Deleware 707-200-2506 [email protected]

Applicant/Grantee Airgoon L.T.D. FCC ID: YKO-WK-9900 Section 15.212 Modular Transmitters Request for Modular Approval X Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Y 3 The modular transmitter must have its own power supply regulation. Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. Signature______ Name/Title: Robert Skilton Company Name: Airgoon L.T.D Address: 2207 Concord Pike Unit 700 Wilmington Delaware 19803 TEL: 888-728-6330 FAX: 888-728-6322 Email: [email protected]

Airgoon LTD. 2207 Concord Pike Unit - 700 Wilmington, DE 19803-2908 TEL: (888) 728-6330 FAX: (888) 728-6322 Date: 2012/2/2 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize (Miller Lee /Measurement Center Manger) of Compliance Certification Services Inc . and hereafter referred to as (CCS), to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by (Miller Lee / Measurement Center Manger) of Compliance Certification Services Inc. on our behalf shall have the same effect as acts of our own. In authorizing (CCS) as our agent, we still recognize that we are responsible to: a) Comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) Make claims regarding certification only in respect of the scope for which certification has been granted? d) Do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) Use certification only to indicate the products are certified as being in conformity with specified standards; g) Endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) Document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Q Mr. Robert K Skilton VP R & D Engineering [email protected] REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us.

Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 1 / 10 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 2 / 10 Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 3 / 10 Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 4 / 10 Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 5 / 10 Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 6 / 10 Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 7 Compliance Certification Services Inc. Report No.: T111021002 Date of Issue: November 16, 2011 A1 - 8

Model: Air­Lock WK 9900 850/1900 MHz Network Stabilizer Module ID: YKO‐WK‐9900 S/N: 103111000001 ID: 9176A‐WK9900 FCC/IC Regulatory Information Important Notice. This device has been tested and complies with the following: Parts 22H and 24E of the FCC CFR47 Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. Label Location

Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Page 169 7.7 APPENDIX I RADIO FREQUENCY EXPOSURE LIMIT EUT Specification EUT Air-Lock WK-9900 Network Stabilizer Module Booster Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others: WCDMA Band V Uplink: 826.4 ~ 846.6 MHz WCDMA Band V Downlink: 871.4 ~ 891.6 MHz Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power Mode: WCDMA WCDMA Band V Uplink: 826.4 ~ 846.6 MHz: 29.58 dBm / 907.82mW WCDMA Band V Downlink: 871.4 ~ 891.6 MHz: 13.06 dBm / 20.23mW Max. output power Mode: AMPS Uplink: -6.81 dBm / 000.2 W Downlink: 25.03 dBm / 318.4 W Max. output power Mode: CDMA Uplink: 1.22 dBm / 1.3 W Downlink: 31.88 dBm / 1541.7 W Max. output power Mode: TDMA Uplink: -4.17 dBm / 0.4 W Downlink: 28.89 dBm / 774.5 W Antenna gain (Max) 15 dBi (Numeric gain: 31.62) Evaluation applied MPE Evaluation SAR Evaluation N/A Test Specification: ANSI / IEEE Std.C95.1-1999, H46_2/99_237E: 199 Remark: The maximum output power is 31.88 dBm (1541.7mW) (with 31.62 numeric antenna gain.) TEST RESULTS No non-compliance noted. MPE EVALUATION No non-compliance noted. Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Page 170 Calculation Given d GP E ×× = 30 & 3770 2 E S = Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure EUT output power = 1541.7mW Numeric Antenna gain = 31.62 Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Æ Power density = 9.70096mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.) Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Page 171 EUT Air-Lock WK-9900 Network Stabilizer Module Booster Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Others: WCDMA Band II Uplink: 1852.4 ~ 1907.6 MHz WCDMA Band II Downlink: 1932.4 ~ 1987.6 MHz Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power Mode: WCDMA WCDMA Band II Uplink: 1852.4 ~ 1907.6 MHz: 28.53 dBm / 712.85mW WCDMA Band II Downlink: 1932.4 ~ 1987.6 MHz: 15.33 dBm / 34.12mW Max. output power Mode: AMPS Uplink: -10.23 dBm / 0.1 W Downlink: 23.26 dBm / 211.8 W Max. output power Mode: CDMA Uplink: -1.16 dBm / 0.8 W Downlink: 14.90 dBm / 30.9 W Max. output power Mode: TDMA Uplink: -4.58 dBm / 0.3 W Downlink: 27.91 dBm / 618.0 W Antenna gain (Max) 15 dBi (Numeric gain: 31.62) Evaluation applied MPE Evaluation SAR Evaluation N/A Test Specification: ANSI / IEEE Std.C95.1-1999, H46_2/99_237E: 199 Remark: The maximum output power is 28.53 dBm (712.85mW) (with 31.62 numeric antenna gain.) TEST RESULTS No non-compliance noted. MPE EVALUATION No non-compliance noted. Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Page 172 Calculation Given d GP E ×× = 30 & 3770 2 E S= Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Maximum Permissible Exposure EUT output power = 712.85mW Numeric Antenna gain = 31.62 Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Æ Power density = 4.4855 mW / cm 2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.)

Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 174 FCC 47 CFR PART 22 SUBPART H AND PART 24 SUBPART E & INDUSTRY CANADA RSS-131 TEST REPORT For Air-Lock WK-9900 Network Stabilizer Module Booster Trade Name: Airgoon Model: Air-Lock WK 9900 Issued to Airgoon LTD. 2207 Concord Pike, Suite 700, Wilmington, DELAWARE, United States, 19803 Issued by Compliance Certification Services Inc. No.11, Wu-Gong 6th Rd., Wugu Industrial Park, New Taipei City 248, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: April 20, 2012 Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Page 2 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 April 20, 2012 Initial Issue ALL Gina Lo Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Page 3 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION............................................................................................. 4 2. EUT DESCRIPTION .................................................................................................................... 5 3. TEST METHODOLOGY ............................................................................................................. 7 3.1 EUT CONFIGURATION.............................................................................................................. 7 3.2 EUT EXERCISE......................................................................................................................... 7 3.3 GENERAL TEST PROCEDURES.................................................................................................. 7 3.4 DESCRIPTION OF TEST MODES................................................................................................. 8 4. INSTRUMENT CALIBRATION................................................................................................. 9 4.1 MEASURING INSTRUMENT CALIBRATION........................................................................... 9 4.2 MEASUREMENT EQUIPMENT USED ............................................................................ 10 4.3 MEASUREMENT UNCERTAINTY .................................................................................. 11 5. FACILITIES AND ACCREDITATIONS ................................................................................. 12 5.1 FACILITIES............................................................................................................................ 12 5.2 EQUIPMENT........................................................................................................................... 12 5.3 LABORATORY ACCREDITATIONS AND LISTING..................................................................... 12 5.4 TABLE OF ACCREDITATIONS AND LISTINGS.......................................................................... 13 6. SETUP OF EQUIPMENT UNDER TEST ................................................................................ 14 6.1 SETUP CONFIGURATION OF EUT............................................................................................ 14 6.2 SUPPORT EQUIPMENT..................................................................................................... 14 7. FCC PART 22 & 24 REQUIREMENTS & INDUSTRY CANADA RSS-131 ....................... 15 7.1 RF OUTPUT POWER TEST..................................................................................................... 15 7.2 OCCUPIED BANDWIDTH / BAND EDGE TEST........................................................................ 18 7.3 CONDUCTED SPURIOUS EMISSIONS TEST............................................................................. 95 7.4 FIELD STRENGTH OF SPURIOUS RADIATION....................................................................... 141 7.5 MEASUREMENT OF FREQUENCY STABILITY....................................................................... 167 7.6 FREQUENCY SPECTRUM TO BE INVESTIGATED................................................................... 168 7.7 APPENDIX I RADIO FREQUENCY EXPOSURE .......................................................... 169 APPENDIX II PHOTOGRAPHS OF TEST SETUP .................................................................... 173 APPENDIX 1 - PHOTOGRAPHS OF EUT Compliance Certification Services Inc. IC: 9176A-WK9900 FCC ID: YKO-WK-9900 Report No.: T111021002 Page 4 1. TEST RESULT CERTIFICATION Applicant: Airgoon LTD. 2207 Concord Pike, Suite 700, Wilmington, DELAWARE, United States, 19803 Manufacturer: Airgoon LTD. 2207 Concord Pike, Suite 700, Wilmington, DELAWARE, United States, 19803 Equipment Under Test: Air-Lock WK-9900 Network Stabilizer Module Booster Tr a d e N a m e : Airgoon Model Number: Air-Lock WK 9900 Date of Test: October 28, 2011 ~ April 12, 2012 APPLICABLE …

Text truncated - open the document above for the full version.