Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: lReorient or relocate the receiving antenna. lIncrease the separation between the equipment and receiver. lConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. lConsult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Block Diagram RF controller attena MCU RF I/O+POWER RF2411A 2.405-2.476GHz Crystal 16MHz
Shenzhen Lantian Electronics Co., Ltd Data: August 3, 2010 FCC ID:YN5R5605 Dear Sir, I hereby have entrusted the following person to be a proxy regarding applicaton for Type Certification. Most Technology Service Co., Ltd Address: No.5, Langshan 2nd Rd, North Hi-Tech Industrial park, Nanshan, Shenzhen, Guangdong, China Name: Terry Job Title: Manager Email: [email protected] I am therefore responsible for the contents of the application. Model Name of the specified radio equipment: LM-5602 FCC ID: YN5R5605 Product Name: Wireless Mouse-Receiver Signature____________________ FCC grantee contact person information. Name/Title: Run Wang (Engineer) Company Name: Shenzhen Lantian Electronics Co., Ltd Address: Building A2, Area 4, Fuqiao Industrial Park, Qiaotou Village, Fuyong Town, Bao’an Zone, Shenzhen, China TEL: +86-755-29604957-333 FAX: +86-755-29604957-835 Email: [email protected]
FCC ID: YN5R5605 Report No.: MOST100718F2A FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE FCC ID: YN5R5605 Report No.: MOST100718F2A LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE FCC ID: YN5R5605 Report No.: MOST100718F2A TOP VIEW OF SAMPLE BOTTOM VIEW OF SAMPLE
FCC ID: YN5R5605 Report No.: MOST100718F2A Page 35 of 35 INTERNAL PHOTO OF SAMPLE
Operation Description 1 Hopping Range Hereby we declare that the maximum range frequency of this device is: 2.405-2.476GHz. 2 Hopping Sequence Example of Group1 and Group2 hopping sequence in data mode. The ID determine Which group will be used Group1: 2.408GHZ, 2.459GHZ, 2.417GHZ, 2.442GHZ, 2.414GHZ, 2.475GHZ, 2.431GHZ, 2.472GHZ 2.436GHZ, 2.473GHZ, 2.439GHZ, 2.447GHZ, 2.428GHZ, 2.461GHZ, 2.407GHZ, 2.468GHZ 2.412GHZ, 2.451GHZ, 2.427GHZ, 2.460GHZ, 2.420GHZ, 2.469GHZ, 2.435GHZ, 2.452GHZ 2.422GHZ, 2.457GHZ, 2.437GHZ, 2.476GHZ, 2.438GHZ, 2.465GHZ, 2.421GHZ, 2.458GHZ Group2: 2.409GHZ, 2.464GHZ, 2.416GHZ, 2.467GHZ, 2.419GHZ, 2.466GHZ, 2.430GHZ, 2.449GHZ 2.411GHZ, 2.456GHZ, 2.423GHZ, 2.453GHZ, 2.425GHZ, 2.444GHZ, 2.406GHZ, 2.474GHZ 2.429GHZ, 2.446GHZ, 2.418GHZ, 2.471GHZ, 2.415GHZ, 2.448GHZ, 2.432GHZ, 2.462GHZ 2.413GHZ, 2.470GHZ, 2.434GHZ, 2.463GHZ, 2.405GHZ, 2.443GHZ, 2.410GHZ, 2.455GHZ 3 Receiver input bandwidth The Dwell time (hopping timing) is 8mS, will NOT auto-adjusted depends on the air traffic condition. The input bandwidth of the receiver is 1MHz. The dongle determines the hopping sequence. The keyboard follows this sequence. Both devices shift between RX and TX time slot according to the clock of the dongle. 4. Power The power is DC 5.OV by USB port. 5. Modulation and antenna The modulation type is GFSK, the crystal frequency is 16 MHz and the antenna is internal.
123456 A B C D 654321 D C B A Title NumberRevisionSize B Date:24-Dec-2009Sheet of File:F:\谭工\LKM\LKM5603(T5602+H7802)\资料\凌阳\LA YOUT\R-5605 LY V1.0 091022.DDBDrawn By: VSS 6 PA5 7 VDD 8 PA1 9 RF-VCCD 10 VBAT 1 VDD-OUT 2 TEST 3 VLX 4 PC6 5 RF-DGND 11 RF-VDDD 12 RF-XOUT 13 RF-XIN 14 RF-PSB 15 RF-VCOG 16 RF-VCOPG 17 RF-VCOVDD 18 RF-VDD 19 ANT1 20 ANT2 21 RF-GNDPG 22 RF-GND 23 RF-VCC 24 GND-IF 25 PB1 26 PC4 27 PD2 28 PD1 29 PD0 30 PC5 31 PA4 32 PA3 33 PB2 34 PB3 35 PA6 36 PA7 37 PB0 38 PB7 39 PB6 40 U1 SPRF2413 MISO SCLK MISO TRRDY SCLK MISOSPIENPWR C3 1UF C2 1UF PSBXOXI X116MHZ R3 1M C5 39PF C6 39PF XIXO C7 10NF C10 1NF L133NH L23.3NH C9 10PF C810NF TRINT LED1 R4 1K VCC PSB SPIENTRRDYTRINT D-D+ R2 10R C2 1UF PWR PWR C1 10UF VCC R1 10R 1 2 3 4 USB D- D+ L3 33NH UnRegistered
FCC 47 CFR PART 15 SUBPART B TEST REPORT For Applicant : Shenzhen Lantian Electronics Co., Ltd. Address : Building A2, Area 4, Fuqiao Industrial Park, Qiaotou Village, Fuyong Town, Bao’ an Zone, Shenzhen, China Product Name : Wireless Mouse- Receiver Model Name : LM-5602 Brand Name : N/A FCC ID : YN5R5605 Report No.MOST100718F1 Date of Issue : July. 30, 2010 Issued by :Most Technology Service Co., Ltd. Address : No.5, 2nd Langshan Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 24 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: YN5R5605 Report No.: MOST100718F1 Page 2 of 24 TABLE OF CONTENTS 1.VERIFICATION OF CONFORMITY .............................................................................................................. 3 2. GENERAL INFORMATION ............................................................................................................................ 4 2.1 PRODUCT INFORMATION .......................................................................................................................... 4 2.2 OBJECTIVE ................................................................................................................................................. 4 2.3 TEST STANDARDS AND RESULTS ............................................................................................................ 4 2.4 ENVIRONMENTAL CONDITIONS ............................................................................................................... 5 2.5 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 3. TEST METHODOLOGY ................................................................................................................................. 6 3. 1TEST FACILITY............................................................................................................................................ 6 3.2 GENERAL TEST PROCEDURES ................................................................................................................ 6 4 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................ 7 4.1 SETUP CONFIGURATION OF EUT............................................................................................................. 7 4.2 SUPPORT EQUIPMENT.............................................................................................................................. 7 4. 3 TEST EQUIPMENT LIST ............................................................................................................................ 8 5. FCC 47 CFR PART 15B REQUIREMENTS................................................................................................. 9 5.1 GENERAL INFORMATION........................................................................................................................... 9 6. LINE CONDUCTED EMISSION TEST ...................................................................................................... 10 6.1. LIMITS OF LINE CONDUCTED EMISSION TEST ................................................................................... 10 6.2. BLOCK DIAGRAM OF TEST SETUP........................................................................................................ 10 6.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ................................................11 6.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ..............................................................11 6.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ....................................................................... 12 7. RADIATED EMISSION TEST .................................................................................................................... 14 7.1. LIMITS OF RADIATED DISTURBANCES AT 3M DISTANCES FOR CLASS B ........................................ 14 7.2 TEST DESCRIPTION................................................................................................................................. 14 7.3 TEST RESULT ........................................................................................................................................... 16 APPENDIX 1 .................................................................................................................................................... 19 PHOTOGRAPHS OF TEST SETUP................................................................................................................. 19 APPENDIX 2 .................................................................................................................................................... 21 PHOTOGRAPHS OF EUT ............................................................................................................................... 21 FCC ID: YN5R5605 Report No.: MOST100718F1 Page 3 of 24 1.VERIFICATION OF CONFORMITY Equipment Under Test: Wireless Mouse- Receiver Brand Name: N/A Model Number: LM-5602 FCC ID: YN5R5605 Shenzhen Lantian Electronics Co., Ltd. Applicant: Building A2, Area 4, Fuqiao Industrial Park, Qiaotou Village, Fuyong Town, Bao’ an Zone, Shenzhen, China Shenzhen Lantian Electronics Co., Ltd. Manufacturer: Building A2, Area 4, Fuqiao Industrial Park, Qiaotou Village, Fuyong Town, Bao’ an Zone, Shenzhen, China Technical Standards: FCC Part 15 B File Number: MOST100718F1 Date of test: July. 29 ~ July. 30, 2010 Deviation: None …
Text truncated - open the document above for the full version.
FCC ID: YN5R5605 Report No.: MOST100718F2A CE TEST SETUP RE TEST SETUP FCC ID: YN5R5605 Report No.: MOST100718F2A
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15B | - | - |

Wireless Keyboard
Equipment Class
DXT - Part 15 Low Power Transceiver, Rx Verified
Receiver
Equipment Class
DXT - Part 15 Low Power Transceiver, Rx Verified
Keyboard
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Wireless Mouse
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter