YNIJAZWARES73AFNT0733 - FNT - Deluxe Feature Vehicle (RC Mudflap)

CNTS: MUDFLAP INSTRUCION MAUL 8+ MUDFLAP REMOT CNTROL REAXD FIT JONESY REUSABL DECALS FNT0733 Made in China Used with permission. Manufactured and Distributed by: Jazwar es, LLC, Sunrise, FL 33326, USA Jazwar es, 16A Crane Grove, London, N7 8LE, United Kingdom Jazwar es GmbH, Mina-Rees-Str . 8, 64295 Darmstadt, Germany www.jazwares.com / www.jazwares.de © 2021 Epic Games, Inc. Fortnite and its logo are trademarks of Epic Games, Inc. in the USA (Reg. U.S. Pat. & Tm. O.) and elsewhere. BATTERY WARNINGS: 1. Batt eries are to be replaced by an adult. 2. Non-rechargeable batt eries are not to be recharged. 3. Rechargeable batt eries are to be removed from the toy befor e being charged. 4. Rechargeable batt eries are only to be charged under adult supervision. 5. For best performance, only the recommended batt eries or their equivalent are to be used. 6. Batt eries must be inserted with correct polarity. 7. Do not mix new and used batt eries. 8. Do not mix dierent types of batteries. 9. Exhausted batt eries are to be removed from the toy. 10. The supply terminals are not to be short- circuited. • TO CLEAN, WIPE WITH A CLOTH. • DO NOT SUBMERGE IN WATER. • DO NOT USE CHEMICAL OR ABRASIVE CLEANERS. HOW T CLAN MUDFLAP WARNING: This toy produces ashes that may trigger epilepsy in sensitised individuals. WARNING! All of the packaging, such as tape, plastic sheets, wire ties, stickers and tags, are not part of this product. Please discard for your child’s safety. Retain package for future reference as it contains important information. Conforms to toy safety standards CPSIA, ASTM-F963 and EN71. Product appearance and colors may vary from shown. WARNING! Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receive is connected. • Consult the dealer or an experienced radio/TV technician for help. TROUBLSHOTING Transmitter controller battery is drained. Replace the controller battery. The vehicle is likely out of range. Bring controller closer to the vehicle. If problem persists, remove the controller batteries and replace with new batteries, then restart (ON/OFF) the vehicle. Interference from surrounding electrical machinery. Bring to a wide open space. The vehicle is likely out of range. Bring controller closer to the vehicle. If problem persists, remove the controller batteries and replace with new batteries and restart (ON/OFF) the vehicle. If the controller light is off, its battery is drained. Replace the controller batteries. FCC ID for Vehicle: YNIJAZWARES733 FCC ID for Controller: YNIJAZWARES73A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. OFF / ON BUTTON REMOTE CONTROL LED LIGHT HOW T PLAY REMOT CNTROL PAIRNG Turn the vehicle ON, then turn the transmitter controller ON within 30 seconds.* *Do not press any buttons or switches on the controller while pairing, this may cause interference. The LED light on controller will start blinking. Once the pairing is successful, the LED light on controller will stop blinking and stay on. If pairing is unsuccessful, turn the vehicle and controller OFF and try again. NOTE: The vehicle will enter sleep mode after approximately 2 minutes of inactivity. If the vehicle enters sleep mode, turn the vehicle and controller o, then back on to continue operating with full capabilities. 1 2 3 4 5 Switch mode from TRY ME to ON at the bottom of the Mudap for full features. Do not operate your vehicle on the street or on wet surfaces. For best results, operate on smooth surfaces and avoid water and other liquids. ADJUST ERING ALINMET If the vehicle doesn't move forward in a straight direction, adjust the steering alignment lever on the underside of the vehicle. FIGURE PLACEMNT Front of Cab opens to allow easy gure placement. SOUND ACTIVON Collision sounds activate by pressing front bumper. LIGHT ACIVTON While turned ON, Mudap lights will remain illuminated. ON / OFF / TRY ME BUTTON ON OFF TRY ME STEERING ALIGNMENT LEVER BATERY INSTALION STRUCIONS ADULT INSALTION REQUID Move the switch at the bottom of the Mudap to the OFF mode. Use a Phillips Head screwdriver (not included) to remove the cover. 1 Remove the old batteries and insert the new (6 X 1.5V AA Size (LR6)) batteries with the correct polarity indicated inside the box. Screw the cover back in. 2 Move the switch to the ON mode to activate all play features of the Mudap. Move the switch to the OFF mode when not in use to help save battery life. 3 ON / OFF / TRY ME BUTTON BATTERY COMPARTMENT ON OFF TRY ME ON / OFF / TRY ME BUTTON BATTERY COMPARTMENT ON OFF TRY ME ON OFF TRY ME BATTERY COMPARTMENT MUDFLAP BATTERY COMPARTMENT REMOT CNTROL Move the switch at the bottom of the Remote C…

Text truncated - open the document above for the full version.

Letter of Agency Jazwares, LLC 2021/05/14 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Jazwares, LLC FCC ID: YNIJAZWARES73A To Whom It May Concern: We, (Jazwares, LLC), hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number (YNIJAZWARES73A) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 2021/05/14. The Limited Agency Agreement expires on 2022/05/13, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Signature: Name: Simon Ng Title: Director of Compliance & Quality Assurance

Confidential Request Jazwares, LLC Attention: Certification reviewer RE: Request for Confidentiality FCC ID: YNIJAZWARES73A To Whom It May Concern: Permanent Confidentiality Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: Schematics Block Diagrams Operational Description Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Sincerely, _________________ Signature: Name: Simon Ng Title: Director of Compliance & Quality Assurance Date:2021/05/14

Page 1 of 2 External Photos Page 2 of 2

Label Artwork and Location SIZE: 22mm (W) x 2mm (H)

Page 1 of 2 Internal Photos Page 2 of 2

YNIJAZWARES73A 1 INTERTEK TESTING SERVICES RF Exposure The equipment under test (EUT) is a FNT0733 - FNT - Deluxe Feature Vehicle (RC Mudflap) operating at 2.4G Band. The EUT can be powered by DC 3.0V (2 x 1.5V AAA batteries). For more detail information pls. refer to the user manual. Antenna Type: Integral antenna. Antenna Gain: 0dBi. The normal radiated output power (e.i.r.p) is: -3.0dBm (tolerance: +/- 3dB). The normal conducted output power is -3.0dBm (tolerance: +/- 3dB). Modulation Type: GFSK. According to the KDB 447498: The Maximum peak radiated emission for the EUT is 91.8 dBμV/m at 3m in the frequency 2410MHz The EIRP = [(FS*D) ^2 / 30] mW = -3.43dBm which is within the production variation. The Minimum peak radiated emission for the EUT is 91.2 dBμV/m at 3m in the frequency 2473MHz The EIRP = [(FS*D) ^2 / 30] mW = -4.03dBm which is within the production variation. The maximum conducted output power specified is 0dBm= 1.000mW The source- based time-averaging conducted output power =1.000* Duty cycle mW <1.000 mW(Duty cycle <100%) The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.473) mW = 9.54 mW Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. The duty cycle is simply the on-time divided by the period: The duration of one cycle = 11.8261ms Effective period of the cycle = 0.1449ms DC =0.1449ms / 11.8261ms =0.0123 or 1.23% FCC ID:

Jazwares, LLC TEST REPORT SCOPE OF WORK FCC TESTING– MODEL: FNT0733 REPORT NUMBER SZHH01566109-003 ISSUE DATE JUNE 4 2021 PAGES 24 DOCUMENT CONTROL NUMBER FCC ID 249_C © 2017 INTERTEK Intertek Report No.: SZHH01566109-003 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Service Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, People’s Republic of China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 24 FCC ID 249_C Test Report Jazwares, LLC Application for Certification FCC ID: YNIJAZWARES73A FNT0733 - FNT - Deluxe Feature Vehicle (RC Mudflap) Model: FNT0733 2.4GHz Transceiver Report No.: SZHH01566109-003 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-19] Prepared and Checked by: Approved by: Sign on file Terry Tang Assistant Supervisor Peter Kang Technical Supervisor Date: June 4 2021 Intertek Report No.: SZHH01566109-003 Version: 01-November-2017 Page: 2 of 24 FCC ID 249_C Test Report MEASUREMENT/TECHNICAL REPORT This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-19 Edition] provision. Report prepared by: Terry Tang Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, People’s Republic of China Tel / Fax: 86-755-8601 6288/86-755-8601 6751 Intertek Report No.: SZHH01566109-003 Version: 01-November-2017 Page: 3 of 24 FCC ID 249_C Test Report Table of Contents 1.0 Summary of Test Result .......................................................................................... 4 2.0 General Description ................................................................................................. 5 2.1 Product Description ................................................................................................. 5 2.2 Related Submittal(s) Grants .................................................................................... 5 2.3 Test Methodology .................................................................................................... 5 2.4 Test Facility ............................................................................................................ 5 3.0 System Test Configuration ...................................................................................... 6 3.1 Justification ............................................................................................................. 6 3.2 EUT Exercising Software ......................................................................................... 6 3.3 Special Accessories ................................................................................................ 6 3.4 Equipment Modification ........................................................................................... 6 3.5 Measurement Uncertainty ....................................................................................... 6 3.6 Support Equipment List and Description .................................................................. 6 4.0 Emission Results ..................................................................................................... 7 4.1 Radiated Test Results ............................................................................................. 7 4.1.1 Field Strength Calculation ..................................................................................... 7 4.1.2 Radiated Emission Configuration Photograph ....................................................... 8 4.1.3 Radiated Emissions .............................................................................................. 8 4.1.4 Transmitter Spurious Emissions ......................................................................... 11 5.0 Equipment Photographs ........................................................................................ 15 6.0 Product Labelling ................................................................................................... 15 7.0 Technical Specifications ........................................................................................ 15 8.0 Instruction Manual ................................................................................................. 15 9.0 Miscellaneous Information .................................................................................... 16 9.1 Bandedge Plot ................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 2 Radiated Photos Up to 1GHz (The EUT placed at the center of the turntable) Page 2 of 2 Above 1GHz (The EUT placed at the center of the turntable)