YU2-FARORHearing System

R-housingSolutions for better hearing n faro R n faro R TRT n saga R n saga R TRT n libra R n libra R TRT n miro R n miro R TRT n sueno R Intended use of hearing aids Hearing aids by audifon are utilized to compensate impairments in personal hearing. They require an individual fitting in per formance, executed by a hearing aid professional. The hearing aid’s mode of action is the reception of sound using a microphone, digital processing of the signal and playback of the amplified Sound. Please see the list below for categorization of hearing loss levels and correspondant devices: Intended use of combined Tinnitus-Retraining-instruments The combined devices are intended for the adult population suffering from a chronic persistent ringing in the ears (Tinnitus), who also need or desire amplification. The amplification suits the needs of a slight to a profound hearing loss. The products may also be used for masking Tinnitus as part of a Tinnitus Retraining Therapy (TRT) protocol and should be utilized only in consultation with a licensed hearing healthcare professional, who is trained in subsequent rehabilitation therapy, or a qualified audiologist. Degree of hearing loss Hearing loss range (dB) Slight Mild Moderate Moderate severe Severe Profound 16–2 5 26–40 41–55 56–70 71–90 90+ Device NameHearing loss level faro R TRT, libra R TRT, miro R TRT, saga R TRT slight to severe 3 audifon hereby declares that the devices faro R and faro R TRT comply with the essential requirements and other relevant provisions of the directive 1999/5/EC. The declaration of conformity can be consulted at the premises of audifon GmbH & Co. KG, Werner-von-Siemens-Straße 2, 99625 Kölleda, Germany. This device complies with Industr y Canada license-exempt RSS standard(s) and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause inter ference, and (2) this device must accept any inter ference, including inter ference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Intended use of Tinnitus-Retraining-instruments The devices are intended for the adult population suffering from a chronic persistent ringing in the ears (Tinnitus), who do not need or desire amplification. The products may be used for masking Tinnitus as part of a Tinnitus Retraining Therapy (TRT) protocol and should be utilized only in consultation with a licensed hearing healthcare professional, who is trained in subsequent rehabilitation therapy, or a qualified audiologist Last revised: 29.10.2014 4 5 Contents 1 Introduction ........................................................................6 2 Safety instructions ..............................................................7 2.1 Important warnings ......................................................7 2.2 Notes on product safety .................................................8 3 Overview of different types ................................................10 4 Technical specifications ......................................................11 5 Construction ......................................................................12 5.1 faro R, saga R, libra R, miro R and TRT versions ..............12 5.2 sueno R.........................................................................13 6 Start-up ..............................................................................14 7 Switching on and off ...........................................................15 8 Inserting the devices ...........................................................16 9 Volume and program selection ...........................................17 9.1 Multifunctional rocker switch .......................................17 9.2 Volume selection ..........................................................18 9.3 Selecting the hearing programs ....................................19 10 Automatic telephone program ...........................................21 11 Care instructions ................................................................23 11.1 Cleaning and care of Behind-The-Ear hearing aids with an external receiver .............................................24 11.2 Changing the ear wax protection filter .........................25 11.3 Dr ying hearing aids .....................................................26 12 TRT combi instruments......................................................28 13 Dealing with problems .......................................................29 14 Environmentally friendly disposal ......................................30 15 Ser vice ................................................................................31 Warranty card 6 1 Introduction Congratulations on the purchase of your new audifon devices. Your hearing care professional has adjusted the hearing aids or tinnitus retraining instruments to your individual requirements. These instructions are therefore intended to help you use your audifon devices properly. Please read through the following operating and care instructions carefully to avoid malfunctions and faults. If you follow these instructions, your hearing aids will prove an invaluable help in your day-to-day communication with your surroundings and other people. The specific model of your devices is shown on the sticker on the packaging, or on the warranty card or printed on the hearing aids themselves. If you have any further questions, please contact your hearing care professional. 7 Keep batteries, hearing aids and ti…

Text truncated - open the document above for the full version.

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 02.01.2012 Datum: 00.00.0000 Seite 1 von 1 Long/Short-term Confidentiality Request PHOENIX TESTLAB GmbH Date: 03 December 2014 Product Certification Königswinkel 10 D 32825 Blomberg FCC ID: YU2-FAROR To Whom it may concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagram Tune-Up Info Operational Description In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentilality) withheld from the public disclosure for an initial period of days until: not applicable External Photos Test Setup Photos Internal Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. Thank you for your attention in this matter. Signatory B. Sc. Uwe DOLLITZ Graduated Certification Specialist PHOENIX TESTLAB GmbH

ANNEX B External photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 1 of 4 144890_eut1 ANNEX B External photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 2 of 4 144890_eut2 ANNEX B External photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 3 of 4 144890_eut3 ANNEX B External photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 4 of 4 144890_eut4

1,35 4 8 141° 90° 1 4 1 4,70 2,74 2,74 25° 17 11,72 1,4 5,75 0,50 2:1 faro R: Schriftfeld: 4,7mm x 1mm Schrifthöhe: 0,8mm Schriftart: Swiss721 BT CE-Zeichen: Schriftfeld: 4mm x 1mm Schrifthöhe: 0,8mm audifon Logo: Schriftfeld: 5,75mm x 1,4mm FCC Bereich: Schriftfeld: 8mm x 4mm Schrifthöhe: 1,76mm Schriftart: Agency FB 00-002 Gehäusebedruckung audifon - faro R 12.01.2015 12.01.2015 GEWICHT: A3 BLATT 1 VON 2MASSSTAB:5:1 ZEICHNUNGSNR. BENENNUNG: ÄNDERUNG ZEICHNUNG NICHT SKALIEREN WERKSTOFF: DATUM SIGNATUR NAME ENTGRATEN UND SCHARFE KANTEN BRECHEN OBERFLÄCHENGÜTE: WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLÄCHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: QUALITÄT PRODUKTION GENEHMIGT GEPRÜFT GEZEICHNET MRo STe elfe312

ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 1 of 8 144890_eut5 ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 2 of 8 144890_eut6 ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 3 of 8 144890_eut7 ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 4 of 8 144890_eut8 ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 5 of 8 144890_eut9 ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 6 of 8 144890_eut10 ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 7 of 8 144890_eut11 ANNEX C Internal photos Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 8 of 8 144890_eu12

Königswinkel 10 32825 Blomberg Germany Phone +49 5235 9500-0 Fax +49 5235 9500-10 Test Report Report Number: F144890E3 Equipment under Test (EUT): Hearing Aid “faro R” Applicant: Audifon GmbH & Co. KG Manufacturer: Audifon GmbH & Co. KG Laboratory (CAB) accredited by Deutsche Akkreditierungsstelle GmbH (DAkkS) in compliance with DIN EN ISO/IEC 17025 under the Reg. No. D-PL-17186-01-02, FCC Test site registration number 90877 and Industry Canada Test site registration IC3469A-1 Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 2 of 20 REFERENCES [1] ANSI C63.4:2009 American National Standard for Methods of Measuring of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. [2] FCC 47 CFR Part 15 Radio Frequency Devices [3] RSS-210 Issue 8 (December 2010) Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment [4] RSS-Gen Issue 4 (November 2014) General Requirements and Information for the Certification of Radiocommunication Equipment TEST RESULT The requirements of the tests performed as shown in the overview (chapter 4 of this test report) were fulfilled by the equipment under test. The complete test results are presented in the following. RESERVATION This test report is only valid in its original form. Any reproduction of its contents in extracts without written permission of the accredited test laboratory PHOENIX TESTLAB GmbH is prohibited. The test results herein refer only to the tested sample. PHOENIX TESTLAB GmbH is not responsible for any generalisations or conclusions drawn from these test results concerning further samples. Any modification of the tested samples is prohibited and leads to the invalidity of this test report. Each page necessarily contains the PHOENIX TESTLAB Logo and the TEST REPORT NUMBER. Test engineer: Michael DINTER 27 November 2014 Name Signature Date Authorized reviewer: Bernd STEINER 27 November 2014 Name Signature Date Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 3 of 20 Contents: Page 1 Identification ................................................................................................................................... 4 1.1 Applicant ................................................................................................................................ 4 1.2 Manufacturer.......................................................................................................................... 4 1.3 Test laboratory ....................................................................................................................... 4 1.4 EUT (equipment Under Test) ................................................................................................. 5 1.5 Technical data of equipment .................................................................................................. 5 1.6 Dates ..................................................................................................................................... 6 2 Operational states and physical boundaries .................................................................................... 7 3 Additional information ..................................................................................................................... 8 4 Overview ........................................................................................................................................ 8 5 Test results ..................................................................................................................................... 9 5.1 Radiated emissions ................................................................................................................ 9 5.1.1 Method of measurement (radiated emissions) ............................................................ 9 5.1.2 Preliminary radiated emission tests (9 kHz to 30 MHz) ............................................... 14 5.1.3 Preliminary radiated emission tests (30 MHz to 1 GHz) .............................................. 16 5.1.4 Final radiated emission test (9 kHz to 30 MHz) ........................................................... 18 6 Report history ................................................................................................................................. 19 7 Test equipment and ancillaries used for tests .................................................................................. 19 8 List of annexes ............................................................................................................................... 20 Testengineer: Michael DINTER Report Number: F144890E3 Date of issue: 27 November 2014 Order Number: 14-114890 page 4 of 20 1 Identification 1.1 Applicant Name: audifon GmbH & Co. KG Address: Werner-von-Siemens-Straße 2 99625 Kölleda Country: Germany Name for contact purposes: Mr. Stephan Teders Phone: +49-(0)-2202-92638-14 Fax: +49-(0)-2202-92638-29 eMail Address: [email protected] Manufacturer represented during the test by the following person: -- 1.2 Manufacturer Name: audifon GmbH & Co. KG Address: Werner-von-Siemens-Straße 2 99625 Kölleda Country: Germany Name for contact purposes: Mr. Stephan Teders Phone: +49-(0)-2202-92638-14 Fax: +49-(0)-2202-92638-29 eMail Address: [email protected] Manufacturer represented during the test by the following person: -- 1.3 Test laboratory The tests were carried out at: PHOENIX TESTLAB GmbH Königswinkel 10 32825 Blomberg Germany Test Laboratory (CAB) accredited by Deutsche Akkreditierungsstelle GmbH (DAkkS) in compliance with DIN EN ISO/IEC 17025 under the Reg. No. D-PL-17186-01-02, recognized by Bundesnetzagentur under the Reg.-No. BNetzA-CAB-02/21-104. CAB Designation Number DE0004, listed by FCC 31040/SIT1300F2, IC OATS Listing 3469A-1. Testengineer: Michael DINTER Report N…

Text truncated - open the document above for the full version.

Examiner: Dinter, Michael Test Report No.: E Date of issue: 28.11.2014 Order No.: -11 page 1 of 5 144890_emi1 Examiner: Dinter, Michael Test Report No.: E Date of issue: 28.11.2014 Order No.: -11 page 2 of 5 144890_emi2 Examiner: Dinter, Michael Test Report No.: E Date of issue: 28.11.2014 Order No.: -11 page 3 of 5 144890_emi3 Examiner: Dinter, Michael Test Report No.: E Date of issue: 28.11.2014 Order No.: -11 page 4 of 5 144890_emi4 Examiner: Dinter, Michael Test Report No.: E Date of issue: 28.11.2014 Order No.: -11 page 5 of 5 144890_emi5