Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 6 | 27 | 2.51 GHz - 2.68 GHz | 186.00 mW | 17M9D7D | 2.5
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesSingle Modular Approval. Output power is conducted.
This device is to be used only for mobile and fixed application; and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance; and the module antenna(s) must be installed to meet the RF exposure compliance separation distance of �20 cm�. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.
For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed following for satisfying RF exposure compliance.
LTE B41: 3.97 dBi, WCDMA B5: 2.18 dBi,
Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22 and 27. The Grantee is responsible for providing the documentation required for modular use.
This device has bandwidth mode LTE B41: 5/10/15/20 MHz
