YZP-VL3020ATelematics Module

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Address FRN Grantee Code FCC ID: Authorized Contact Name Contact Phone Contact Email I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2025-11-20 Print Name: Title: *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database LGkInnoteCo.,Ltd. 30,Magokjungang10-ro,Gangseo-gu,Seoul,SouthKorea 0020332813 YZP gnoeJgnahcnI 28-26-059-2330 YZP-VL3020A [email protected] InchangJeong SeniorResearchEngineer

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business NameLG Innotek Co., Ltd. Address FRN Grantee Code FCC ID: Authorized Contact NameJeong Inchang Contact Phone 82-62-950-0332 Contact Email LG Innotek Co., Ltd. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is not inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date:Nov 20, 2025 Print Name: Title: *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database 03, kogaMjgnagnu 01-or, oesgnaG-ug, luoeS, htuoS aeroK 1823302003 YZPYZP-VL0203A [email protected] Inchang Jeong Senior Research Engineer

UNITED STATES DESIGNATED AGENT LETTER Date: 2025.11.20 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 U.S. designated agent Applicant Company Name: LG Innotek Co., Ltd. Company Name: Americas Compliance Consulting LLC dba iCertifi FRN: 0033399411 Contact Name: Paul Preston Grantee Code: YZP Contact Name: Inchang Jeong Address: 30, Magokjungang 10-ro Gangseo-gu Address: City/Province/Zip: Seoul/South korea/07796 City/Province/Zip: Telephone: +82-62-950-0332 Telephone: +1(866) 885-4575 Fax: +82-62-950-0368 Fax: Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: < YZP-VL3020A > We, LG Innotek Co., Ltd. and Americas Compliance Consulting LLC dba iCertifi understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the Unit ed States for matters relat ed to the applicable equipment, and at the physical U.S. address and e- mail of the designated agent list ed above. We, LG Innotek Co., Ltd. and Americas Compliance Consulting LLC dba iCertifi acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the Unit ed States for no less than one year after either the grant ee has permanently terminated all marketing and importation of the applicable equipment withi n the U.S., or the conclusion of any Commission-relat ed administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed) : Paul Preston Title: President Name (Printed): LG Innotek Co., Ltd. Title: Senior Research Engineer Signature: Signature: ATTN: Director of Certification: 2445 NE Division St, ste 202 Bend, OR 97703 United States

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 LETTER FOR AUTHORIZATION FCC ID : LTD-VL3020A To whom it may concern: I, the undersigned, hereby authorize SGS Korea Co., Ltd. and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti‐Drug Abuse Act of 1988, 21 U.S.C . 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a)comply with the relevant provisions of the certification program; b)make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)make claims regarding certification only in respect of the scope for which certification has been granted; d)do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents asrequired by the Certification Division; f)use certification only to indicate the products are certified as being in conformity with specified standards; g)endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h)ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; November 20, 202 30, Magokjungang 10-ro, Gangseo-gu, Seoul, Korea 5 i)keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j)take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k)document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours Jeong Inchang Senior Research Engineer LG Innotek Co., Ltd.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 Request of Confidentiality for FCC ID : YZP-VL3020A To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Innotek Co., Ltd hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. Th e public disclosure of these matters might be harmful to th e Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Innotek Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIS T Permanent 1 2 3 4 Short-Te r m 5 7 8 9 LG Innotek Co., Ltd. 30, Magokjungang 10-ro, Gangseo-gu, Seoul, Republic of Korea,07796 Block Diagram Operational Descriptions Schematics Part List PCB layout Internal Photos Te s t-Setup Photos External Photos 10 User Manual 6 Tune-up Nov 20, 2025 The A pplicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely yours, (Sign) Name / Title : Inchang Jeong / Senior Research Engineer Company Name : LG Innotek Co., Ltd. LG Innotek Co., Ltd. 30, Magokjungang 10-ro, Gangseo-gu, Seoul, Republic of Korea, 07796

Cover Letter-Modular Approval Date: Nov 13, 2025 Gentlemen: There’s a Telematics Module that would like to have your authorization as a modular approval. The specific product as below, Telematics Module with its designed features and specified description, meets special requirements for Full modular approval on FCC KDB996369 by cross-reference list below. Company LG Innotek Co., Ltd. Model Name Telematics Module Model Number LTD-VL3020 FCC ID Requirement of FCC KDB996369 Comply（Y/N） Y The EUT provides the RF shielding. See EUT photo. Y The EUT has its buffered modulation, Y The EUT was tested with a test board, Please see test setup photo. PZY-LV0203A which are implemented internally within the RF IC. FCC ID : YZP-VL3020A Y The EUT has its own power supply regulation, please see the Schematics. Y The EUT meets the FCC antenna requirements. 5.The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. 4.The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b), and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “ professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. 3.The modular transmitter must have its own power supply regulation. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over- modulation. 1.The modular transmitter must have its own RF shielding. 6.The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: YZP-VL3020A” or “ Contains FCC ID: YZP-VL3020A.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Y Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions give to the OEM on how to label the end product. Y The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are give in the User Manual. Y The EUT complies with RF exposure requirement. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example , FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). 7.The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter, and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Thank you. Sincerely, By: ___________________ ___ Inchang Jeong_____ (Signature 1 ) (Print name) Title: Senior Research Engineer On behalf of: LG Innotek Co., Ltd. (Company Name) Telephone: +82-62-950-0332

1) LGA product Label LTD-VL3020 Label Information 1. M/N : LTD-VL3020 5. FCC ID :YZP-VL3020A Marking location Location LGA Module Label

SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006499 Page: 2 of 8 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) INDEX Table of Contents 1. General Information -------------------------------------------------------------------------------------- 3 2. RF Exposure Evaluation -------------------------------------------------------------------------------- 5 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006499 Page: 3 of 8 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - CAB Identifier: KR0150 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 688 0901 Fax No. : +82 31 688 0921 1.2. Details of Applicant Applicant : LG Innotek Co., Ltd. Address : 30, Magokjungang 10-ro, Gangseo-gu, Seoul, South Korea Contact Person : Jeong, In-Chang Phone No. : +82 62 950 0332 1.3. Details of Manufacturer Company : Same as applicant Address : Same as applicant 1.4. Description of EUT Kind of Product Telematics Module Model Name LTD-VL3020 Serial Number Conducted: C-001 Radiated: R-001 Power Supply DC 4.0 V Rated Power LTE Band 2, 4, 5, 13: 23 ㏈m Frequency Range LTE Band 2: 1 850 ㎒ ~ 1 910 ㎒ LTE Band 4: 1 710 ㎒ ~ 1 755 ㎒ LTE Band 5: 824 ㎒ ~ 849 ㎒ LTE Band 13: 777 ㎒ ~ 787 ㎒ Modulation Technique QPSK, 16QAM Antenna Type Dipole antenna Antenna Gain ※ Refer to the clause 1.5 H/W Version 0.0 S/W Version 01K_DCUSKU1 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006499 Page: 4 of 8 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 1.5. Antenna Information Band Operating Frequency (㎒) Antenna Peak Gain (㏈i) LTE Band 2 1 850 ~ 1 910 5.97 LTE Band 4 1 710 ~ 1 755 4.13 LTE Band 5 824 ~ 849 2.18 LTE Band 13 777 ~ 787 -0.24 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 1 Section Test Item(s) Result 1.1307(b)(3) RF Exposure Evaluation Pass 1.7. Test Report Revision Revision Report Number Date of Issue Description 0 F690501-RF-RTL006499 2025.11.11 Initial SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006499 Page: 5 of 8 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 2. RF Exposure Evaluation Test exemptions apply for devices used in general population/uncontrolled exposure environments, according to the SAR-based, or MPE-based exemption thresholds. 2.1. Blanket 1 ㎽ Blanket Exemption The 1 ㎽ Blanket Exemption of § 1.1307(b)(3)(i)(A) applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power of no more than 1 ㎽, regardless of separation distance. The 1 ㎽ blanket exemption applies at separation distances less than 0.5 ㎝, including where there is no separation. This exemption shall not be used in conjunction with other exemption criteria other than those for multiple RF sources in paragraph § 1.1307(b)(3)(ii)(A). The 1 ㎽ exemption is independent of service type and covers the full range of 100 ㎑ to 100 ㎓, but it shall not be used in conjunction with other exemption criteria or in devices with higher-power transmitters operating in the same time-averaging period. Exposure from such higher-power transmitters would invalidate the underlying assumption that exposure from the lower-power transmitter is the only contributor to SAR in the relevant volume of tissue. SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006499 Page: 6 of 8 RTT7081-02(2020.10.05)(0) A4(210 mmx297 mm) 2.2. MPE-based Exemption General frequency and separation-distance dependent MPE-based effective radiated power (ERP) thresholds are in Table B.1 [Table 1 of § 1.1307(b)(1)(i)(C)] to support an exemption from further evaluation from 300 ㎑ through 100 ㎓. Table 1: THRESHOLDS FOR SINGLE RF SOURCES SUBJECT TO ROUTINE ENVIRONMENTAL EVALUATION RF Source Frequency Minimum Distance Threshold ERP f L (㎒) f H (㎒) λ L / 2π λ H / 2π W 0.3 - 1.34 159 m - 35.6 m 1 920 R2 1.34 - 30 35.6 m - 1.6 m 3 450 R 2 /f 2 30 - 300 1.6 m - 159 mm 3.83 R 2 300 - 1 500 159 mm - 31.8 mm 0.012 8 R 2 f 1 500 - 100 000 31.8 mm - 0.5 mm 19.2 R 2 Subscripts L and H are low and high; λ is wavelength. From § 1.1307(b)(3)(i)(C), modified by adding Minimum Distance columns. The table applies to any RF source (i.e., single fixed, mobile, and portable transmitters) and specifies power and distance criteria for each of the five frequency ranges used for the MPE limits. These criteria apply at separation distances from any part of the radiating structure of at least λ/2π. The thresholds are based on the general population MPE limits with a single perfect reflection, outside of the reactive near-field, and in the main beam of the radiator. For mobile devices that are not exempt per Table B.1 [Table 1 of § 1.1307(b)(1)(i)(C)] at distances from 20 ㎝ to 40 ㎝ and in 0.3 ㎓ to 6 ㎓, evaluation of compliance with the exposure limits in § 1.1310 is necessary if the ERP of the device is greater than ERP 20 ㎝ in Formula (B.1) [repeated from § 2.1091(c)(1) and § 1.1307(b)(1)(i)(B)]. If the ERP is not easily obtained, then the available maximum time-averaged power may be used (i.e., without consideration of ERP only if the physical dimensions o…

Text truncated - open the document above for the full version.

SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 2 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) INDEX Table of Contents Page 1. General Information ---------------------------------------------------------------------------------------- 3 2. E.R.P. / E.I.R.P. & Radiated Spurious Emissions ------------------------------------------------ 9 3. Conducted Output Power --------------------------------------------------------------------------------- 18 4. Occupied Bandwidth --------------------------------------------------------------------------------------- 28 5. Peak-Average Ratio --------------------------------------------------------------------------------------- 37 6. Spurious Emissions at Antenna Terminal ------------------------------------------------------------ 46 7. Band Edge ---------------------------------------------------------------------------------------------------- 51 8. Frequency Stability ----------------------------------------------------------------------------------------- 92 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 3 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - Designation number: KR0150 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 688 0901 Fax No. : +82 31 688 0921 1.2. Details of Applicant Applicant : LG Innotek Co., Ltd. Address : 30, Magokjungang 10-ro, Gangseo-gu, Seoul, South Korea Contact Person : Jeong, In-Chang Phone No. : +82 62 950 0332 1.3. Details of Manufacturer Company : Same as applicant Address : Same as applicant 1.4. Description of EUT Kind of Product Telematics Module Model Name LTD-VL3020 Serial Number Conducted: C-001 Radiated: R-001 Power Supply DC 4.0 V Rated Power LTE Band 2, 4, 5, 13: 23 ㏈m Frequency Range LTE Band 2: 1 850 ㎒ ~ 1 910 ㎒ LTE Band 4: 1 710 ㎒ ~ 1 755 ㎒ LTE Band 5: 824 ㎒ ~ 849 ㎒ LTE Band 13: 777 ㎒ ~ 787 ㎒ Modulation Technique QPSK, 16QAM Antenna Type Dipole antenna Antenna Gain ※ 777 ㎒ ~ 787 ㎒: -0.24 ㏈i 824 ㎒ ~ 849 ㎒: 2.18 ㏈i 1 710 ㎒ ~ 1 755 ㎒: 4.13 ㏈i 1 850 ㎒ ~ 1 910 ㎒: 5.97 ㏈i H/W Version 0.0 S/W Version 01K_DCUSKU1 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 4 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.5. Test Equipment List Equipment Manufacturer Model S/N Cal. Due Cal. Interval Spectrum Analyzer R&S FSV30 103454 12/06/2026 Annual Spectrum Analyzer Agilent N9020A MY53421758 09/10/2026 Annual Signal Generator R&S SMA100B 106887 10/20/2026 Annual DC Power Supply R&S HMP2020 022802107 10/24/2026 Annual DC Power Supply AGILENT 6674A MY41000836 06/11/2026 Annual Communication Analyzer Anritsu MT8821C 6262192291 02/19/2026 Annual Temperature Chamber ESPEC CORP. PL-2J 15004184 06/04/2026 Annual Directional Coupler KRYTAR 152613 140972 10/24/2026 Annual BRIDGE Coupler MARK MICROWAVE INC CBR16-0012 1542 05/15/2026 Annual High Pass Filter Wainwright Instrument GmbH WHNX10-900-1000- 18000-40-SS 7 02/24/2026 Annual High Pass Filter Wainwright Instrument GmbH WHKX3.0/18G-6SS 21 06/17/2026 Annual High Pass Filter Wainwright Instrument GmbH WHNX7.5/26.5G-6SS 11 10/22/2026 Annual Preamplifier H.P. 8447F 2944A03909 08/07/2026 Annual Preamplifier R&S SCU 18F 101058 02/27/2026 Annual Test Receiver R&S ESU26 100109 01/13/2026 Annual Loop Antenna Schwarzbeck Mess-Elektronik FMZB 1519 1519-039 10/01/2027 Biennial Bilog Antenna Schwarzbeck Mess-Elektronik VULB9163 01126 03/05/2027 Biennial Horn Antenna R&S HF906 100326 02/24/2026 Annual Horn Antenna Schwarzbeck Mess-Elektronik BBHA 9170 9170-540 12/11/2025 Annual Antenna Master Innco systems GmbH MA4640-XP-ET MA4640/536/38330516/L N.C.R. N/A Turn Table Innco systems GmbH DS 1200S N/A N.C.R. N/A Controller Innco systems GmbH CONTROLLER CO3000-4P CO3000/963/38330516/L N.C.R. N/A Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/A N.C.R. N/A Coaxial Cable RADIALL TESTPRO 3 182287 04/10/2026 Semi- Annual Coaxial Cable RADIALL TESTPRO 3 182284 04/10/2026 Semi- Annual Coaxial Cable RADIALL TESTPRO 3 182288 04/10/2026 Semi- Annual Coaxial Cable SENSORVIEW NMST-13A26-NMST-5m TPC2402190004 04/13/2026 Semi- Annual Coaxial Cable SENSORVIEW NMST-13A26-NMST-10m TPC2402190001 04/13/2026 Semi- Annual Note; - For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 5 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 2, 22, 24 and 27 Section(s) Test Item Result §2.1046 §22.913(a)(5) §24.232(c) §27.50(b)(9) §27.50(d)(4) E.R.P. / E.I.R.P. Pass §22.917(a) §24.238(a) §27.53(c)(2) §27.53(f) §27.53(h)(1) Radiated Spurious Emissions Pass §2.1046 Conducted Output Power Pass §2.1049 Occupied Bandwidth Pass §22.913(d) §24.232(d) §27.50(d)(5) Peak-Average Ratio Pass §22.917(a) §24.238(a) §27.53(c)(2) §27.53(h)(1) Spurious Emission at Antenna Terminal Pass §22.917(a) §24.238(a) §27.53(c)(2) §27.53(c)(4) §27.53(h)(1) Band E…

Text truncated - open the document above for the full version.

SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 41 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) LTE band 2 10 ㎒ Middle Channel- QPSK 10 ㎒ Middle Channel – 16QAM 15 ㎒ Middle Channel- QPSK 15 ㎒ Middle Channel – 16QAM 20 ㎒ Middle Channel- QPSK 20 ㎒ Middle Channel – 16QAM SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 42 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) LTE band 4 1.4 ㎒ Middle Channel- QPSK 1.4 ㎒ Middle Channel – 16QAM 3 ㎒ Middle Channel- QPSK 3 ㎒ Middle Channel – 16QAM 5 ㎒ Middle Channel- QPSK 5 ㎒ Middle Channel – 16QAM SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 43 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) LTE band 4 10 ㎒ Middle Channel- QPSK 10 ㎒ Middle Channel – 16QAM 15 ㎒ Middle Channel- QPSK 15 ㎒ Middle Channel – 16QAM 20 ㎒ Middle Channel- QPSK 20 ㎒ Middle Channel – 16QAM SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 44 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) LTE band 5 1.4 ㎒ Middle Channel- QPSK 1.4 ㎒ Middle Channel – 16QAM 3 ㎒ Middle Channel- QPSK 3 ㎒ Middle Channel – 16QAM 5 ㎒ Middle Channel- QPSK 5 ㎒ Middle Channel – 16QAM SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 45 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) LTE band 5 10 ㎒ Middle Channel- QPSK 10 ㎒ Middle Channel – 16QAM LTE band 13 5 ㎒ Middle Channel- QPSK 5 ㎒ Middle Channel – 16QAM 10 ㎒ Middle Channel- QPSK 10 ㎒ Middle Channel – 16QAM SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006498 Page: 46 of 96 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 6. Spurious Emission…

Text truncated - open the document above for the full version.