Z5XG801ETXMouse

FCC NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Information: Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures. ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on another circuit. ‐ Consult the dealer or an experienced radio/TV technician for help.

Shenzhen Loyal Electronics Co., Ltd. Authorization Letter Number: CF101 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name Shenzhen Loyal Electronics Co., Ltd. Addresss 8F, Bldg. A, Huayuan Technology Park, Fenghuang Industrial Zone, Fuyong, Bao’an City Shenzhen Country China declare that the following representative (agent): Name (person) Daniel Zhu Company name Anbotek Compliance Laboratory Limited Addresss 1/F, 1 /Build, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description Mouse Type or Model(s) G801E, G802E, G806E, G807E Tradename or Brand(s) N.A. We also authorize Teleconformity (Mr. M. Koop, Rietven 31, 7534NH Enschede, The Netherlands) to process this application. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen, China 2011-12-17 Lei Zhu Engineer

Shenzhen Loyal Electronics Co., Ltd. FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name Shenzhen Loyal Electronics Co., Ltd. Addresss 8F, Bldg. A, Huayuan Technology Park, Fenghuang Industrial Zone, Fuyong, Bao’an City Shenzhen Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: Z5X G801ETX of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) √ Schematics Diagrams √ Block Diagrams √ Circuit Description User Manual Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen, China 2011-12-17 Lei Zhu Engineer

Page 16 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F Figure 1 The EUT-Front View Figure 2 The EUT-Back View Page 17 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F Figure 3 The EUT-Back View

The proposed Label Location on EUT Proposed FCC ID Label Location Proposed Label Location on EUT The EUT-Outside View/Proposed FCC ID Label Location

FCC ID Label Sample for FCC ID: Z5XG801ETX FCC ID: Z5XG801ETX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Page 18 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F Figure 4 The EUT-Inside View Figure 5 PCB of the EUT-Front View Page 19 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F Figure 6 PCB of the EUT-Back View Figure 7 PCB of the EUT-Front View Page 20 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F Figure 8 PCB of the EUT-Back View

Page 1 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F FCC TEST REPORT for Shenzhen Loyal Electronics Co., Ltd. Mouse Model No.: G801E, G802E, G806, G807E Report Number : 201112717F Date of Test : Dec. 14~16, 2011 Date of Report : Dec. 17, 2011 Prepared for : Shenzhen Loyal Electronics Co., Ltd. Address : 8F, Bldg. A, Huayuan Technology Park, Fenghuang Industrial Zone, Fuyong, Bao’an, Shenzhen, China Prepared By : Anbotek Compliance Laboratory Limited Address : 1/F, 1 /Building, SEC Industrial Park, No. 4 Qianhai Road, Nanshan District, Shenzhen, 518054, China Tel: (86) 755-26014771 Fax: (86) 755-26014772 Page 2 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F TABLE OF CONTENTS Description Page Test Report 1. GENERAL INFORMATION .........................................................................................................4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility ......................................................................................................................5 1.3. Measurement Uncertainty.........................................................................................................................5 2. MEASURING DEVICE AND TEST EQUIPMENT.................................................................... 6 3. TEST PROCEDURE ....................................................................................................................... 7 4. RADIATION INTERFERENCE.................................................................................................... 8 4.1. Requirements (15.249, 15.209): ...............................................................................................................8 4.2 Test Procedure ...........................................................................................................................................8 4.3 Test Results................................................................................................................................................8 5. OCCUPIED BANDWIDTH..........................................................................................................12 5.1. Requirements (15.249): ..........................................................................................................................12 5.2. Test Procedure ........................................................................................................................................12 5.3. Test Configuration:.................................................................................................................................12 5.4. Test Results.............................................................................................................................................12 6. PHOTOGRAPH............................................................................................................................. 14 6.1. Photo of Radiation Emission Test ..........................................................................................................14 APPENDIX I (Photos of EUT) (4 Pages) Page 3 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F TEST REPORT Applicant : Shenzhen Loyal Electronics Co., Ltd. Manufacturer : Shenzhen Loyal Electronics Co., Ltd. EUT : Mouse Model No. : G801E, G802E, G806, G807E Serial No. : N.A. Rating : 3V , 15-20mA Trade Mark : N.A. Measurement Procedure Used: FCC Part15 Subpart C, Paragraph 15.207, 15.249 & 15.209 The device described above is tested by Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 15 Subpart C requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Anbotek Compliance Laboratory Limited Date of Test : Dec. 14~16, 2011 Prepared by : (Engineer / Andy Chen) Reviewer : (Project Manager / Coco Xiang) Approved & Authorized Signer : (Manager / Henry Yang) Page 4 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F 1. GENERAL INFORMATION 1.1. Description of Device (EUT) EUT : Mouse Model Number : G801E, G802E, G806, G807E ((Note: All Models are the same except the model number & colour of appliances, so we prepare “G801E” for EMC test only.) Test Power Supply : DC 3 V Frequency : 2410~2473MHz Channels : 2410~2473MHz (A total of 64 channels with channel spacing of 1MHz. Under normal working condition, choose 20 channels of 64 randomly) Antenna Specification : Printed Antenna:1dBi Applicant : Shenzhen Loyal Electronics Co., Ltd. Address : 8F, Bldg. A, Huayuan Technology Park, Fenghuang Industrial Zone, Fuyong, Bao’an, Shenzhen, China Manufacturer : Shenzhen Loyal Electronics Co., Ltd. Address : 8F, Bldg. A, Huayuan Technology Park, Fenghuang Industrial Zone, Fuyong, Bao’an, Shenzhen, China Date of receiver : Dec. 14, 2011 Date of Test : Dec. 14~16, 2011 Page 5 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F 1.2. Description of Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS - LAB Code: L3503 Anbotek Compliance Laboratory Limited., Laboratory has been assessed and in compliance with CNAS/CL01: 2006 accreditation criteria for testing laboratories (identical to ISO/IEC 17025:2005 General Requirements) for the Competence of Testing Laboratories. FCC…

Text truncated - open the document above for the full version.

Page 14 of 20 FCC ID: Z5XG801ETX Anbotek Compliance Laboratory Limited Report No.201112717F 6. PHOTOGRAPH 6.1. Photo of Radiation Emission Test