Z9O-92053072HHCM915 Bed Beacon

ECOLAB HAND HYGIENE PROGRAM COMPLIANCE MONITORING SYSTEM August 2022 Bed Beacon and Floor Antenna Installation Users’ Guide 92053072 Bed Beacon Assembly 50001428 Optional AC Power Supply 53003805 Adhesive-backed Floor Antenna 53003804 Rubber-backed floor Antenna Ecolab Hand Hygiene Program Compliance Monitoring System Page 1 Ecolab Hand Hygiene Program Compliance Monitoring System B E D B E A C O N A N D F L O O R A N T E N N A I N S T A L L A T I O N U S E R S ’ G U I D E CONTENTS 0. INTRODUCTION TO THE BED BEACON AND FLOOR ANTENNA .................. 4 1. REQUIRED MATERIALS ...................................................................................... 5 1.1 Installation Materials .......................................................................................... 5 1.2 Bed Beacon Components .................................................................................. 7 1.3 Additional Components for Stationary Patient Zone Installation ...................... 8 2. BED BEACON INSTALLATION FUNCTIONS ..................................................... 8 2.1 Bed Mode (Default) (Internal antenna only) .................................................... 10 2.2 Bed Mode, Using External Antenna Only........................................................ 10 2.3 Bed Beacon, Using Internal and External Antenna Mode .............................. 11 2.4 Stretcher Mode, using Internal Antenna Only ................................................. 11 2.5 Stretcher Mode, using External Antenna Only ................................................ 12 2.6 Stretcher Mode Using Internal and External Antenna Mode .......................... 12 3. INSTALLATION ................................................................................................... 13 3.1 Stationary Patient Zone, with Floor Antenna .................................................. 13 1) Stationary Patient Zone: Rubber-Backed Floor Antenna Plus Bed Beacon .. 13 2) Rubber-Backed Floor Antenna Plus Bed Beacon: Cable management ........ 13 3) Stationary Patient Zone: Adhesive-Backed Floor Antenna Plus Bed Beacon14 4) Adhesive-Backed Floor Antenna Plus Bed Beacon: Cable management ..... 15 Ecolab Hand Hygiene Program Compliance Monitoring System Page 1 3.2 Mounting Bracket 9205-2337 Installation - Patient Bed ................................. 15 3.3 Bed Beacon Installation ................................................................................... 16 3.4 AC Line Power Sensor .................................................................................... 17 4. CABLE MANAGEMENT – HILL ROM VERSACARE P3200 ............................ 18 5. ADJUSTING THE PATIENT ZONE..................................................................... 19 5.1 Range Adjustment on Beds ............................................................................. 19 5.2 Test Badge Range Adjustment........................................................................ 20 5.3 Ecolab Dashboard Test with the Network Badge and Bed Beacon ............... 21 6. METADATA ENTRY ............................................................................................ 24 6.1 New Bed Beacon Metadata Entry ................................................................... 24 6.2 Replacing an Existing Bed Beacon – Swapping Metadata ............................ 25 7. TROUBLESHOOTING ......................................................................................... 26 7.1 No Bed Beacon Heartbeats on the Dashboard............................................... 26 7.2 The Bed Installation Does Not Communicate with a Badge ........................... 26 8. SYSTEM COMPONENT CARE AND MAINTENANCE ..................................... 26 8.1 Cleaning the Components ............................................................................... 26 8.2 Handling the Bed Beacon ................................................................................ 26 8.3 Replacement Batteries .................................................................................... 27 9. APPENDIX A - CERTIFICATION AND SAFETY APPROVALS........................ 27 FCC Statement.......................................................................................................... 27 Industry Canada ........................................................................................................ 27 10. APPENDIX C – BED LABEL ............................................................................ 28 11. APPENDIX D- Z BRACKET (9205-2236) ......................................................... 29 12. APPENDIX E - PATIENT BED .......................................................................... 30 13. HILL-ROM ADVANTA INSTALLATION ........................................................... 30 14. INSTALLATION ................................................................................................. 31 14.1 Step 1: Bed Mode Configuration ...................................................................... 31 14.2 Step 2: Installing the Bed Beacon (92053072) ................................................ 32 14.3 Step 3: Installing AC Line Power Sensor on Bed’s AC Power Cord ............... 32 14.4 Step 4: Adjusting the Bed Beacon to Proper Field Range............................... 33 15. CABLE MANAGEMENT ................................................................................... 33 15.1 Step 5: AC Line Power Sensor Cable Routing ................................................ 33 16. STEP 6: FINAL TEST ........................................................................................ 34 16.1 Disconnect and Reconnect the Bed’s AC Power Cord .................................... 34 Ecolab Hand Hygiene Program Compliance Monitoring System Page 2 17. 0B 0B0B 0BBED INSTALLATION CHECKLIST .................................................................. 34 18. APPENDIX F - PATIENT BED HILL-ROM 1000/ADVANTA 2 INSTALLATION 35…

Text truncated - open the document above for the full version.

UNITED STATES DESIGNATED AGENT LETTER Date: 03/10/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: ECOLAB Inc. Company Name: ECOLAB Inc. Grantee Code: Z9O FRN: 0021282710 Contact Name: Sherri Tischler Contact Name: Sherri Tischler Address: 1 Ecolab Place, St Paul, Address: 1 Ecolab Place, St Paul, City/Province/Zip: Minnesota, United States, 55102 City/Province/Zip: Minnesota, United States, 55102 Telephone: 651-795-5816 Telephone: 651-270-0062 Fax: / Fax: / Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: Z9O-92053072 ATTN: Director of Certification: We, ECOLAB Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, ECOLAB Inc. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name: Sherri Tischler Name: Sherri Tischler Title: Global Leader, Equipment and Digital Compliance Regulatory Affairs Title: Global Leader, Equipment and Digital Compliance Regulatory Affairs Signature: Signature:

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 2 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name ECOLAB Inc. Address 1 Ecolab Place, St Paul, Minnesota, United States, 55102 Grantee Code Z9O FCC ID Z9O-92053072 Authorized Contact Name Sherri Tischler Contact Email [email protected] Contact Phone Sherri Tischler I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Ecolab Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ecolab Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 03/10/2023 Print Name: Sherri Tischler Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 2 of 2 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Title: Global Leader, Equipment and Digital Compliance Regulatory Affairs *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

655 Lone Oak Drive Eagan, MN 55121 Date: 12/13/2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Z9O-92053072 To whom it may concern: We, the undersigned, hereby authorize SGS Hong Kong Limited and YW Yung in SGS Hong Kong Limited to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Ecolab This authorization is valid until further written notice from the applicant. Name: Sherri L. Tischler Title: Global Leader, Equipment and Digital Compliance Regulatory Affairs Signature: On behalf of Company: Ecolab Telephone: +1-651-795-5816

DATE:16 December 2022 TO: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States FROM:Ecolab 655 Lone Oak Drive Eagan, MN 55121 SUBJECT:Confidentiality Request regarding application for FCC ID: Z9O-92053072 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Set up Photos User manual Sincerely, Sherri L. Tischler Global Leader, Equipment and Digital Compliance Regulatory Affairs Ecolab Inc Rubber and Adhesive Mat BoM Schematic(s) Block Diagrams Operational Descriptions

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Appendix A Photographs of EUT Constructional Details for HKEM2211001010PF Appendix A: External Photo of HKEM2211001010PF

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. 92053111 772472/8501/0618 FCC ID: Z9O-92053072 IC: 10060A-92053072 MODEL: 92053072 0.5 inches (12.7 mm) RADIUS 0.06 inches (1.524 mm) FONT SIZE 4 pt (1.411 mm) 1.9 inches (48.26 mm) PART NUMBER:92053111 LABEL SPEC:772472_8501_0618 DESCRIPTION:LBL FCC HHCM 915 BED BCN TRIM SIZE:1.9 x 0.5 inches (48.26 x 12.7 mm) INK:BLACK MATERIAL:WHITE PET FILM WITH ADHESIVE = POLY(ETHYLENE TEREPHTHALATE) ADHESIVES:UNDEFINED. WE WILL START WITH PERMANENT ADHESIVE ON PLASTIC PARTS NOTES:FCC NUMBER: “Z9O...” INCORPORATES LETTER “O”, NOT NUMBER “0” ARTWORK OWNED BY ECOLAB INC., 1 ECOLAB PLACE, ST. PAUL, MN 55102 USA THERMAL TRANSFER LABEL, ADHESIVE: EMULSION ACRYLIC HIGH TACK PERMANENT ADHESIVE, UL 969 (PGDQ2/8 or PGJI2/8) AND C-UL APPROVED WITH COMPLIANT RIBBON Icon minimum size is 0.275 (7mm) high

Page 1 of 9 Appendix B: Internal Photo of HKEM2211001010PF Page 2 of 9 Page 3 of 9 Page 4 of 9 53003804 Page 5 of 9 Page 6 of 9 Loop Antenna Page 7 of 9 53003805 Page 8 of 9 Page 9 of 9 Loop Antenna

Healthcare HHCM Mat Antenna Coil Electrical Specification Healthcare Research, Development and Engineering CONFIDENTIAL Proprietary to Ecolab, Inc. Healthcare HHCM Mat Antenna Coil Electrical Specification Ecolab, Inc. Ecolab P/N Revision Date Document Number Page TBD 0 12/14/22 TBD 2 of 8 Table of Contents Proprietary Notice ....................................................................................................................................................................... 3 Abstract........................................................................................................................................................................................ 3 Document Purpose ...................................................................................................................................................................... 3 Revision History ........................................................................................................................................................................... 3 Terms, Acronyms and Abbreviations ........................................................................................................................................... 3 1. Coil Description ........................................................................................................................................................................ 4 2. Electrical Specification ............................................................................................................................................................. 6 2.1 Coil Specification ................................................................................................................................................................ 6 2.2 Coil Drawing and Dimensions ............................................................................................................................................ 6 2.3 Tuning Capacitor Specification .......................................................................................................................................... 7 3. Antenna Assembly Tunning Performance ............................................................................................................................... 8 Figures Figure 1. Prototype flat spiral coil antenna........................................................................................................................... 4 Figure 2. Closeup of prototype flat spiral coil antenna ......................................................................................................... 4 Figure 3. Production prototype flat spiral coil antenna ........................................................................................................ 5 Figure 4. Closeup of production prototype flat spiral coil antenna ...................................................................................... 5 Figure 5. Dimensioned coil drawing...................................................................................................................................... 6 Figure 6. 53004204 PCB assembly ........................................................................................................................................ 7 Figure 7. Tuning results for coils manufactured by CO-E ...................................................................................................... 8 Figure 8. Tuning results for coils manufactured by Aviton ................................................................................................... 8 Tables Table 1. Healthcare HHCM mat antenna coil electrical specification ...................................................................................... 6 Table 2. 53004204 and 53004205 PCB assembly tuning capacitor specification .................................................................... 7 Healthcare HHCM Mat Antenna Coil Electrical Specification Ecolab, Inc. Ecolab P/N Revision Date Document Number Page TBD 0 12/14/22 TBD 3 of 8 Proprietary Notice The information contained in this document is confidential and proprietary to Ecolab, Inc. No part of this document may be distributed or disclosed in any form to any third party without the written permission of Ecolab. Abstract This document provides a brief description and an electrical specification for the Healthcare HHCM Mat Antenna coil and the assembled antenna. This document also provides a brief analysis of early production data to measure the antenna assembly’s tuning performance. Document Purpose Provide an electrical specification for the Healthcare HHCM Mat Antenna coil and antenna assembly. Revision History Revision Description ECO Date DWN CHKD APP 0 Initial Release TBD 12/14/22 SNODGDA TBD TBD Terms, Acronyms and Abbreviations mH Millihenries pF Pico Farads Ω Ohms σ Sigma - 1 Standard Deviation (SD) OOK On Off Keying (Modulation) PCB Printed Circuit Board or Printed Wiring Board (PWB) Healthcare HHCM Mat Antenna Coil Electrical Specification Ecolab, Inc. Ecolab P/N Revision Date Document Number Page TBD 0 12/14/22 TBD 4 of 8 1. Coil Description The Mat Antenna coil is a copper wire flat spiral (racetrack) near-field antenna. It is intended for transmitting an OOK modulated signal with a 125 kHz carrier frequency. Series tuning capacitors are required to make the coil resonated at 125 kHz. Figure 1. Prototype flat spiral coil antenna Figure 2. Closeup of prototype flat spiral coil antenna Healthcare HHCM Mat Antenna Coil Electrical Specification Ecolab, Inc. Ecolab P/N Revision Date Document Number Page TBD 0 12/14/22 TBD 5 of 8 For production, the antenna coil is sandwiched between two thin polyester sheets. Figure 3. Production prototype flat spiral coil antenna Figure 4. Closeup of production prototype flat spiral coil antenna Healthcare HHCM Mat Antenna Coil Electrical Specification Ecolab, Inc. Ecolab P/N Revision Date D…

Text truncated - open the document above for the full version.

Report No.: HKEM221100101006 Page: 1 of 11 Law Man Kit EMC Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request and accessible at http://www.sgs.com/en/Terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. T he document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. TEST REPORT Application No.: HKEM2211001010PF Applicant: ECOLAB Inc. Address of Applicant: FCC: 1 Ecolab Place, St Paul, Minnesota, United States, 55102 IC: Ecolab Schuman Center-F6, 655 Lone Oak Drive, Eagan, MN United States, 55121 Equipment Under Test (EUT): EUT Name: Bed Beacon Model No.: 92053072 Trademark: EcoLab FCC ID: Z9O-92053072 IC: 10060A-92053072 HVIN: 92053072 Standard(s) : 47 CFR Part 1.1307; 47 CFR Part 2.1091 KDB447498D01 General RF Exposure Guidance v06 RSS102 Issue 5 March 2015 SPR-002 2 nd edition October 2022 Date of Receipt: 2022-11-03 Date of Test: 2022-11-07 to 2022-11-10 Date of Issue: 2023-01-05 Test Result: The submitted sample was found to comply with the test requirement Report No.: HKEM221100101006 Page: 2 of 11 Revision Record Revision No. Date Report superseded Remark Authorized for issue by: Panny Leung /Project Engineer Date: 2023-01-05 Law Man Kit /Reviewer Date: 2023-01-05 Report No.: HKEM221100101006 Page: 3 of 11 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result RF Exposure 47 CFR Part 1.1307, 47 CFR Part 2.1091, KDB 447498 D01 KDB447498D01 KDB447498D01 PASS RF Exposure RSS102 Issue 5 RSS-102 Section 2.5.1 RSS102 Issue 5 PASS Declaration of EUT Family Grouping: N/A Note: The product scope is extended with a new AC adaptor and two models of external Mat Antenna (125kHz antenna). • There is no AC Adaptor in the previous scope of product. • There is only one Internal 125kHz antenna in the previous scope of product. The extended scope covers two additional External 125kHz antenna models which would be used with the Bed Beacon product. The internal and external 125kHz antenna models are switchable by manual buttons on the Bed Beacon product. Only one 125kHz antenna can be turned on at a time. There is no change on the main unit as in the previous version, hence, only 125kHz transmitter was tested and related new antenna specification were submitted in this application. Abbreviation: Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radiated Frequency. CH: In this whole report CH means channel. Volt: In this whole report Volt means Voltage. Temp: In this whole report Temp means Temperature. Humid: In this whole report Humid means humidity. Press: In this whole report Press means Pressure. N/A: In this whole report not application. Report No.: HKEM221100101006 Page: 4 of 11 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 D ETAILS OF E.U.T. ......................................................................................................................... 5 4.2 D ESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 TEST LOCATION ............................................................................................................................. 7 4.4 T EST FACILITY ............................................................................................................................... 7 4.5 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.6 A BNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................. 8 5.1 RF EXPOSURE ............................................................................................................................... 8 5.1.1 Test Requirement: ................................................................................................................... 8 5.1.1 IC Radiofrequncy radiation ....................................................................................................... 9 5.1.2 EUT RF Exposure Evaluation ..................................................................................................10 6 PHOTOGRAPHS ......................................................…

Text truncated - open the document above for the full version.

Report No.: HKEM221100101005 Page: 1 of 35 Law Man Kit EMC Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request and accessible at http://www.sgs.com/en/Terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. T he document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the …

Text truncated - open the document above for the full version.