ZDEV5PQHD WiFi IP Camera

V1.0 305503000880 Quick Setup Guide Package Contents Setting Up Your Foscam Security Camera Network Cable 1 Getting Started 2 Physical Description WiFi Connection 1. Please tighten the antenna clockwise and make sure it is in a vertical position. To view this guide in other languages (e.g. Nederlands, Deutsch, Français, Español), and for detailed manuals, tools, etc., please visit foscam.com/downloads. 3 Setting Up Your Camera: Connection via the Foscam App (Recommended) To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet the following specications: iOS: version 11 or higher. Android: 5.0 or higher, using a device with a Graphics Processing Unit (GPU). Before You Get Started Scan the QR code below to download and install the Foscam APP. Note: For the best experience, please update the APP to the latest version! 5. Follow the steps below: Tap to add a device Add Device < Scan the QR code Search in LAN Manually add Scan the QR codeScan the QR code My Device 1 2 Scan QR Code Model: XXX FCC ID:XXXXX IC:12558A-XX S/N:FIAI1403000001 UID:XXXXXXXXXXX FHD Wireless IP Camera 3 Please scan the QR code located on your device My Device Foscam_camera Camera Login New camera username Re-enter new camera password New camera password Submit 12 11 Please do not exit this app or turn off the device during this process(requires approximately 2 minutes to complete) Add Camera < Device Landing.. 20% Garden Foscam_camera 13 Microphone Lens Spotlight & Light Sensor Infrared LED Spotlight & Infrared LED Speaker LAN Power Micro SD Card Slot Reset Note: If the adding process fails, please reset your camera and try adding again according to the above method. Model: XXX FCC ID:XXXXX IC:12558A-XX S/N:FIAI1403000001 UID:XXXXXXXXXXX FHD Wireless IP Camera Scan QR Code Model: XXX FCC ID:XXXXX IC:12558A-XX S/N:FIAI1403000001 UID:XXXXXXXXXXX FHD Wireless IP Camera Please scan the QR code located on your device Device Landing.. Waterproof Lid Tighten clockwise 2. Plug the power adapter into the camera, and please wait for a few seconds until hearing the “Ready for WiFi conguration” 3. Make sure that your smart phone is connected to your WiFi router. WiFi 2.4 GHz Wi-Fi or 5 GHz Wi-Fi WLAN WLAN xxxxx_2.4G xxxxx_5G Settings MY NETWORKS Next Add Device 4 Power the device on until the device voice prompts "Hello foscam" 5 Wi-Fi configuration Keep the device and mobile phone close tothe router. XXXXX_5G WiFi Password Conrm For WiFi configuration, please point the QR code to the camera directly. WiFi connection < I have heard the voice prompt “WiFi connecting” Next 8 Add Camera < 6 The best distance is: 6~12inches (15~30cm Configure WiFi connecton For Wi-Fi configuration, please pion the QR code to the device dirctly. 15CM 15~30cm 5.9~11.8in 90° Save Set name Garden Living Room Device added successfully Please set the device name: Doorway Corridor Garage Kitchen BalconyBed Room Garden Set name Device added successfully Save the body QR code Save the device‘s QR code to the mobile system album to help you re-add the device more conveniently 10 9 4. Open the foscam APP and please register a Foscam account, or sign in if you have one already. Email address Password Sign Up Forgot Password Sign In Accept Privacy Notices and Terms of Seervice Reset I have heard“Hello Foscam" 7 Tips: Please place the QR code on the phone screen about 15 to 30cm (5.9 to 11.8in) away, and if you encounter diculties you can try to move the screen slowly around 15 – 30cm (5.9 - 11.8in). The cords on this product are a potential strangulation hazard. For child safety, please keep these cords out of the reach of children. IP Camera Expansion Screws Wi-Fi Antenna Drill Hole Position Template Screw holes for installing camera Mounting Template Antenna Quick Setup Guide Quick Setup Guide Outdoor FHD Security Camera Power Adapter Security Tips Please change the camera's password regularly, using a combination of numbers, letters and special characters. We recommend that you regularly update your camera with the latest available software and rmware to ensure the best experience with your camera. 5 Hardware Installation . 264 . 264 Point the camera at the desired location and use the screws provided to mount it. 0~90° 0~360° 0~360° Please Note: Ensure that rain or water will not reach the connector ports at the end of the tailcable. These connectors are not weather-resistant. WLAN frequency range: 2412MHz - 2472MHz and 5725MHz - 5850MHz Maximum transmission power: < 18dBm Wireless Standard: IEEE802.11b/g/n (2.4GHz) IEEE802.11a/n/ac (5GHz) Power Supply: DC 12V 1.0A 12W 7 Product Performance Corridor wizard to add your camera. Please visit foscam.com/downloads to view the user manual and for additional detailed steps. 6 Important Notice Camera Username & Password The camera username & password are used to access and manage your camera. Having a strong password can signicantly improve the security of your camera. If you have forgotten either of them, please press the "Reset" button. Press the "Reset" button and hold it for more than 3~5 seconds Storage Media Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (supports FAT32 and exFAT format) storage formats. cloud StorageNVRMicro SD card (FAT32 & exFAT) . 264 . 264 2 3 How to format Micro SD card, please follow the steps below: Scan the QR code below to download the “FoscamFormat ” Tool 4 Open the “FoscamFormat ” Tool 5 FoscamFormat foscam.com/downloads/app_software.html Foscam Format× Choose the SD card: Accept Terms of use Terms of use Format 2019 (c) Euport BV F:\ 1 2 3 3 6 ALL data on disk: I: will be erased, are you sure? Conrm Cancel Warning 7 1 9 Computer Format ready OK Foscam Format × 8 10 11 Safety Tips Prohibit use at high temperature Keep away from re Not a children's toy Caution Electricity Prohibit use at low temperature Keep away from children Keep dry Use the supplied screw pack 0~90° 0~360° 0~360° [email protected] …

Text truncated - open the document above for the full version.

ShenZhen Foscam Intelligent Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Product Name: QHD WiFi IP Camera FCC ID: ZDEV5P Model(s): V5P, V5S, V9905P, V9915P 2.911(d)(5)(i) Equipment Type We, [ShenZhen Foscam Intelligent Technology Co., Ltd. ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: David Tu Date: 2023-08-21 Title and Company name: Quality Department NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenZhen Foscam Intelligent Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Product Name: QHD WiFi IP Camera FCC ID: ZDEV5P Model(s): V5P, V5S, V9905P, V9915P 2.911(d)(5)(ii) Applicant filing We, [ShenZhen Foscam Intelligent Technology Co., Ltd. ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: David Tu Date: 2023-08-21 Title and Company name: Quality Department NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenZhen Foscam Intelligent Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Product Name: QHD WiFi IP Camera FCC ID: ZDEV5P Model(s): V5P, V5S, V9905P, V9915P 2.911(d)(7) USA Designated Agent for Service of Process We, [ShenZhen Foscam Intelligent Technology Co., Ltd. ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China FCC Grantee Code: ZDE Contact Name: David Tu Telephone No: +86-18319051285 Email: [email protected] Signature: Title: Manager Signature: Title: Quality Department Date: 2023-08-21 Date: 2023-08-21 ShenZhen Foscam Intelligent Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-t o-the-communications-supply-chain-through-the

FCC Software Configuration Control Declaration Rev1.1(5G).docx ShenZhen Foscam Intelligent Technology Co., Ltd. FCC Software Configuration Control Declaration Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: QHD WiFi IP Camera / V5P, V5S, V9905P, V9915P Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: David Tu Date: 2023-08-21 Title: Quality Department Signature of applicant

Differences Declaration To whom concern, We company ShenZhen Foscam Intelligent Technology Co., Ltd. Here by declares: The product model(s) V5S, V9905P, V9915P are identical in the PCB layout, electronic schematic and antenna with V5P, only different in model names for different sales regions. Sincerely yours, Name (in print): David Tu Company name: ShenZhen Foscam Intelligent Technology Co., Ltd. Company address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Tel: +86-18319051285

ShenZhen Foscam Intelligent Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-08-21 Subject; Request for Long Term Confidentiality FCC ID: ZDEV5P To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description software security requirement It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: David Tu Title: Quality Manager

Letter of Authorization Company: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China Product Name: QHD WiFi IP Camera Model Number: V5P, V5S, V9905P, V9915P FCC Identifier: ZDEV5P We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: David Tu Date: 2023-08-21 Title: Quality Department

Model: V5P External Model: V5P Model: V5P Model: V5P Model: V5P Model: V5P

Label&Location QHD WiFi IP Camera Model No.: V5P FCC ID: ZDEV5P

Model: V5P Internal Model: V5P Model: V5P Model: V5P Model: V5P Model: V5P

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China EUT Name: QHD WiFi IP Camera Brand Name: FOSCAM Model Number: V5P Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230801R00203 Test Standards: 47 CFR Part 2 Subpart J Section 2.1091 FCC ID: ZDEV5P Test Conclusion: Pass Test Date: 2023-08-01 to 2023-08-16 Date of Issue: 2023-08-17 Prepared By: Chris Liu / Project Engineer Date: 2023-08-17 Approved By: Ryan.CJ / EMC Manager Date: 2023-08-17 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-08-17 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 3. Test Requirement ................................................................................................................................................................................. 6 3.1 Assessment Result ............................................................................................................................................................... 6 Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing, reviewing and a…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: ShenZhen Foscam Intelligent Technology Co., Ltd. Address: Room 901, Unit B, Building 7, Xingke 1st Street, Vanke Cloud City Phase 1, Nanshan Dist., Shenzhen, Guangdong, China EUT Name: QHD WiFi IP Camera Brand Name: FOSCAM Model Number: V5P Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230801R00202 Test Standards: 47 CFR Part 15E Test Conclusion: Pass FCC ID: ZDEV5P Test Date: 2023-08-01 to 2023-08-16 Date of Issue: 2023-08-17 Prepared By: Chris Liu/ Project Engineer Date: 2023-08-17 Approved By: Ryan.CJ / EMC Manager Date: 2023-08-17 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230801R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-08-17 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230801R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ................................................................................................................................................. 5 1.1 Identification of Testing Laboratory ................................................................................................... 5 1.2 Identification of the Responsible Testing Location .......................................................................... 5 1.3 Announcement...................................................................................................................................... 5 2 PRODUCT INFORMATION ................................................................................................................................. 6 2.1 Application Information ....................................................................................................................... 6 2.2 Manufacturer Information .................................................................................................................... 6 2.3 Factory Information .............................................................................................................................. 6 2.4 General Description of Equipment under Test (EUT) ....................................................................... 6 2.5 Technical Information .......................................................................................................................... 6 3 SUMMARY OF TEST RESULTS ......................................................................................................................... 7 3.1 Test Standards ...................................................................................................................................... 7 3.2 Uncertainty of Test ............................................................................................................................... 7 3.3 Summary of Test Result....................................................................................................................... 7 4 TEST CONFIGURATION .................................................................................................................................... 8 4.1 Test Equipment List ............................................................................................................................. 8 4.2 Test Auxiliary Equipment ...................................................................................................................14 4.3 Test Modes ..........................................................................................................................................14 5 EVALUATION RESULTS (EVALUATION) ........................................................................................................15 5.1 Antenna requirement .........................................................................................................................15 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) ......................................................................................15 6.1 Conducted Emission at AC power line ............................................................................................15 6.1.1 E.U.T. Operation: .....................................................................................................................15 6.1.2 Test Setup Diagram: ................................................................................................................15 6.1.3 Test Data: ................................................................................................................................16 6.2 Duty Cycle .................…

Text truncated - open the document above for the full version.

Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 69 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 802.11ac(VHT20)_HCH_5240MHz_Ant1_NTNV 802.11ac(VHT20)_LCH_5745MHz_Ant1_NTNV Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 70 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 802.11ac(VHT20)_MCH_5785MHz_Ant1_NTNV 802.11ac(VHT20)_HCH_5825MHz_Ant1_NTNV Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 71 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 802.11ac(VHT40)_LCH_5190MHz_Ant1_NTNV 802.11ac(VHT40)_HCH_5230MHz_Ant1_NTNV Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 72 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 802.11ac(VHT40)_LCH_5755MHz_Ant1_NTNV 802.11ac(VHT40)_HCH_5795MHz_Ant1_NTNV Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 73 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 802.11ac(VHT80)_MCH_5210MHz_Ant1_NTNV 802.11ac(VHT80)_MCH_5775MHz_Ant1_NTNV Test Report Number: BTF230801R00203 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 74 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 2.2 6dB BW 2.2.1 Test Result Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 802.11a SISO 5745 1 15.131 >=0.5 Pass 5785 1 15.…

Text truncated - open the document above for the full version.