ZDIK2-652PE11N Wireless PCI-E Card

.................................................................................................................................... 3 ..................................................................................................... 4 ............................................................................................................................ 4 1.2 Indicator status ..................................................................................................................... 5 1.3 Security Alert ....................................................................................................................... 6 .............................................................................................. 6 2.1 Hardware Installation .......................................................................................................... 7 ............................................................ 8 ..................................................................................................... 8 ............................................................................................... 10 ..................................................... 13 .............................................................................................. 13 .......................................................................................... 15 ............................................................................................................... 17       1.2 Indicator status 1.3 Security Alert      2.1 Hardware Installation Note: The LINK and ACT LED may not work correctly, if users do not use the driver in the CD-ROM 2.37 2.11 1.52 1.50 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. In order to comply with RF exposure requirements, a minimum distance of 20 cm shall be maintained between the antenna and all persons for final Installation, and only the reversed antenna with the max. gain less or equal to 2 dBi shall be used. FCC ID: ZDIK2-652PE IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 21.06.07 Datum: 00.00.00 Seite 1 von 1 Date: Sep.23.2011 Subject: Ad Hoc Mode Function Declaration FCC ID: ZDIK2-652PE To Whom it may concern, This device is acting as slave and operating in the 2.4 GHz (2412 – 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, Name: Commy Position: Sales Manager CompanyShenzhen Kingnet Technology Co.,Ltd Adress3F,Building 5,Civil Science Industry Zone,Pingshan,Xili, Nanshan, Shenzhen, China

Ersteller: D. Brandhorst Revision: 01 Erstelldatum: 07.03.2008 Datum: 27.06.2011 Seite 1 von 1 Shenzhen Kingnet Technology Co.,Ltd Date: Sep. 17, 2011 FCC ID: ZDIK2-652PE Subject: Attestation Letter “Declaration of Conformity” Dear Sirs, Our products with the above FCC ID are defined as composite device. The transmitter is authorized under the “Certification” procedure. The device is also defined as “PC Periphery” acc to §15.101 Equipment authorization of unintentional radiators, where we hereby declare, that we apply and follow the “FCC Declaration of Conformity” procedure, based on testing from a FCC accredited testing laboratory or involvement of a CB. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Name Commy Lu Position Sales Manager CompanyAdress 3F,Building 5,Civil Science Industry Zone,Pingshan,Xili,Nanshan, Shenzhen, China

Sep.16, 2011 Federal Communication Commission Authorization and Evaluation Division FCC ID: ZDIK2-652PE Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Shenzhen Kingnet Technology Co.,Ltd Contact person: Commy Title: Sales Manager

CompanyShenzhen Kingnet Technology Co.,Ltd Attn: Reviewing Engineer RE: PART 15 UNLICENSED MODULAR TRANSMITTER APPROVAL To Whom It May Concern: We, (Shenzhen Kingnet Technology Co.,Ltd), hereby requests for part 15 unlicensed modular transmitter approval of our device, described as follows: Brand name: KINGNET Model name: 11N Wireless PCI-E Card Type number: K2-652PE FCC ID: ZDIK2-652PE In FCC Public Notice DA 00-1407 released June 26,2000 there are eight numbered requirements that our device complies with: 1. The modular transmitter must have its own shielding. The modular have its own shielding. 2. The modular transmitter must have buffered modulation/data inputs The modular have buffered modulation/data inputs. 3. The modular transmitter must have its own power supply regulation The modular transmitter have its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c The modular is comply with the antenna requirements of section 15.203 and 15.204c. 5. The modular transmitter must be tested in a stand-alone configuration The modular was tested in a stand-alone configuration. 6. The modular transmitter must be labelled with its own FCC ID number The modular was labelled with its own FCC ID. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The modular is comply with any specific or operating requirements applicable to the transmitter. 8. The modular transmitter must comply with any applicable RF exposure requirements. The modular is comply with any applicable RF exposure requirements. Name: Commy Position: Sales Manager

TOTAL VIEW OF EUT TOP VIEW OF EUT Wi-Fi antenna BOTTOM VIEW OF EUT

FCC ID: ZDIK2‐652PE

TOTAL VIEW OF EUT TOP VIEW OF EUT Wi-Fi antenna BOTTOM VIEW OF EUT

FCC Test Report Report No.: AGC00M110101‐2F2 FCC ID : ZDIK2‐652PE PRODUCT DESIGNATION : 11N Wireless PCI‐E Card BRAND NAME : KINGNET TEST MODEL : K2‐652PE CLIENT : Shenzhen Kingnet Technology Co., Ltd DATE OF ISSUE : Sep.16, 2011 STANDARD(S) : FCC Part 15 Rules Attestation of Global Compliance Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00M110101-2F2 Page 1 of 44 VERIFICATION OF COMPLIANCE Applicant Shenzhen Kingnet Technology Co., Ltd 1-4F,Building 5,Civil Science Industry Zone, Pingshan, Xili, Nanshan, Shenzhen China ,P.R.C Manufacturer Shenzhen Kingnet Electronics Technology Co., Ltd 1-4F,Building 5,Civil Science Industry Zone, Pingshan, Xili, Nanshan, Shenzhen China, P.R.C Product Designation 11N Wireless PCI-E Card Brand Name KINGNET Model Name K2-652PE FCC ID ZDIK2-652PE Report Number AGC00M110101-2F1 Date of Test Sep.9 to Sep.16, 2011 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with radiated emission limits of FCC Rules Part 15.247. Tested By: Angela Li Sep.16, 2011 Reviewed By: Forrest Lei Sep.16, 2011 Approved By: Solger Zhang Sep.16, 2011 Report No.: AGC00M110101-2F2 Page 2 of 44 TABLE OF CONTENTS 1. GENERAL INFORMATION ..................................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION ................................................................................................................................................ 4 1.2 TABLE OF CARRIER FREQUENCYS ............................................................................................................................ 4 1.3 IEEE 802.11N MODULATION SCHEME ........................................................................................................................ 5 1.4 RELATED SUBMITTAL(S) / GRANT (S) ....................................................................................................................... 5 1.5 TEST METHODOLOGY ..................................................................................................................................................... 5 1.6 TEST FACILITY .................................................................................................................................................................. 5 1.7 SPECIAL ACCESSORIES ................................................................................................................................................ 5 1.8 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 2. SYSTEM TEST CONFIGURATION ....................................................................................................................................... 6 2.1 CONFIGURATION OF EUT SYSTEM ............................................................................................................................. 6 2.2 EQUIPMENT USED IN EUT SYSTEM ............................................................................................................................ 6 3. SUMMARY OF TEST RESULTS ........................................................................................................................................... 7 4. DESCRIPTION OF TEST MODES ......................................................................................................................................... 7 5 PEAK OUTPUT POWER .......................................................................................................................................................... 8 5.1 MEASUREMENT PROCEDURE ...................................................................................................................................... 8 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................................................... 8 5.3 MEASUREMENT EQUIPMENT USED ........................................................................................................................... 8 5.4 LIMITS AND MEASUREMENT RESULT ....................................................................................................................... 9 6 6 DB BANDWIDTH ................................................................................................................................................................. 11 6.1 MEASUREMENT PROCEDURE .................................................................................................................................... 11 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 11 6.3 MEASUREMENT EQUIPMENT USED ......................................................................................................................... 11 6.4 LIMITS AND MEASUREMENT RESULTS .................................................................................................................. 11 7. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................................... 17 7.1 MEASUREMENT PROCEDURE .................................................................................................................................... 17 7.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................... 17 7.3 MEASUREMENT EQUIPMENT USED .......................................…

Text truncated - open the document above for the full version.

RADIATED EMISSION TEST SETUP CONDUCTED EMISSION TEST SETUP