ZGAGX-7012MID

1 USER MANUAL UDI7012 Safety Precautions 2 Read these safety instructions before using your device and store them for possible future reference. Always follow these basic safety precautions when using your Mobile device. This reduces the risk of fire, electric shock, and injury. ● Do not expose this product to rain or moisture. ● Keep the device out of direct sunlight and heat sources. ● Protect the power cord. Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to the point where the cord attaches to the device. ● Only use the AC adapter included with the device. Using any other power adapter voids your warranty. ● Do not remove the cover. There are no user-serviceable parts inside. ● If the charger cord is damaged, have it repaired by the manufacturer, its service or a similarly qualified person in order to avoid any hazard. ● The charger is not intended for use by persons (including children) with reduced physical, sensory or mental capacity. Persons who have not read the manual, unless they have received explanations by a person responsible for their safety and supervision should not use this unit. ● Children should be monitored to ensure that they do not play with the charger. ● The charger should always be readily accessible. ● The device should not be exposed to dripping or splashing water. ● No objects filled with liquids such as vases shall be placed on the device. ● Always leave a minimum distance of 10 cm around the unit to ensure sufficient ventilation. ● Naked flame sources, such as candles, should not be placed on top of the device. ● The device is intended for use only in a temperate climate. ● CAUTION: Danger of explosion if battery is incorrectly replaced or not replaced by the same type or equivalent. ● The battery should not be exposed to excessive heat such as sunshine, fire or similar. ● Different types of batteries, new and used batteries should not be mixed. ● The battery must be installed according to the polarity. ● If the battery is worn, it must be removed from the product. ● The battery must be disposed of safely. Always use the collection bins provided (check with your dealer) to protect the environment. Clean your Device Treat the screen gently. To clean fingerprints or dust from the screen, we recommend using a soft, non- abrasive cloth such as a camera lens cloth. SWITCH OFF IN RESTRICTED AREAS Turn off the power when the useof the mobile device is not authorized or when it may cause interference or danger, for example; on board an aircraft, near medical equipment, fuel, chemicals or blasting sites. ROAD SAFETY COMES FIRST Check the current laws and regulations in the area where you drive, regarding the use of mobile devices such as this mobile device.  Do not hold this mobile device while driving  Concentratefully on driving  Radio Frequency (RF) can affect certain electronic systems in your car, such as the audio-stereo system or security equipment.  An airbag inflates with great force. Do not store the mobile device or any of its accessories in the area above the bag or in its deployment area. INTERFERENCE All wireless devices are susceptible to interference which can affect their performance. AUTHORISED PERSONNEL 3 Only qualified personnel are authorized to install or repair this product. ACCESSORIES Only use batteries, chargers and other accessories which are compatible for this device. Do not connect incompatible accesssories to the device. KEEP YOUR DEVICE DRY Your device is not water proof. Keep it dry. CHILDREN Keep the mobile device in a safe place out of the reach of children. Your mobile device contains small pieces which can present a choking hazard. Specification Display Type: 7 inch TFT panel Max Resolution: 1024 x 600 Processor Type: Boxchip A23 Storage drive type: 8GB System RAM: 1G DDRIII Operating System: Android 4.2 Touch Panel: Capacitive Touch Panel Wireless connection : 802.11b/g/n Built-in battery capacity: Li-polymer rechargeable battery 2800mAH Out-put: DC 5V---2A 1. Outlook Description 2. Power Button Usage Starting up：Long press the power button for 3 seconds. 4 Power off：Long press the power button for 3 seconds →click power off → click confirm Screen off and on ：Short press power button to turn off or turn on screen Mandatory shutdown: If the device has no response, long press the power button for 6 seconds to perform mandatory power off Notice: In case of no necessary conditions, It's better not use mandatory power off. Power off should be performed normally according to the standard steps. 3．Desktop 3‐1 Introduction of Main Interface Press and hold the power button to boot up the machine, the screen after boot‐up is in a locked state, slide on unlock icon to unlock, then you will enter the main interface as shown below. Through this interface you can browse menu used recently, replace wallpaper, add widgets or program shortcut, open procedures or carry out other operations. 3‐1‐1.Status bar: tap on status bar at the lower right corner with finger, you can open notification bar to read prompt message, networking status, battery status, and check date and time. 3‐1‐2.Return button: tap with finger, you can return to the previous operation or exit the application program. 3‐1‐3. Main interface: tap main interface button to enter the main interface: 5 ● Add: its function is to add small icons with a variety of functions or widgets, folders, wallpapers; you can delete icons on main interface by holding down the icon to be deleted, when there is X‐Remove icon appear, drag this icon directly to X for deletion ● File Manager: view all the procedures in this machine and uninstall programs; ● Wallpaper: in this menu, you can set up your favourite pictures as the background of the main interface. ● Search: enter Web page search waiting state, input website here for search. ● Setting: touch and directly enter the system setting menu interface. 3‐1‐4．Me…

Text truncated - open the document above for the full version.

Gardex Electronics Co., Ltd. Gardex Electronics Co., Ltd. FCC ID: ZGAGX-7012 DATE: July 20, 2014 We , Gardex Electronics Co., Ltd. don’t provide any controls or software to allow the operation outside of the USA frequency band when we sell this product in USA. The product only use frequency band from 2412-2462MHz in USA. Sincerely yours, Gardex Electronics Co., Ltd. Wei Ma / Manager Fax: +86-0755-26607211 Tel: +86-0755-88838999 E-mail: [email protected]

Gardex Electronics Co., Ltd. Attestation for FCC Declaration of Conformity FCC ID: ZGAGX-7012 DATE: July 20, 2014 Please be notified that we, the undersigned, Gardex Electronics Co., Ltd. declare that the product which bears the above FCC ID is also compliant with the FCC requirements for DoC. Testing in regards to this report was done by Interocean EMC Technology Corp. located at No.5-2, Lin 1, Tin-Fu Tsun, Lin-Kou Hsiang, New Taipei City, Taiwan 244, R.O.C.., which has been accredited in accordance to all of the requirements of 47CFR 2.948(d) and (e) of the FCC rules and KDB349827 Sincerely yours, Gardex Electronics Co., Ltd. Wei Ma / Manager Fax: +86-0755-26607211 Tel: +86-0755-88838999 E-mail: [email protected]

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 02.01.2012 Datum: 00.00.0000 Seite 1 von 1 Long Confidentiality Request PHOENIX TESTLAB GmbH Date: 24 July 2014 Product Certification Königswinkel 10 D 32825 Blomberg FCC ID: ZGAGX-7012 To Whom it may concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagram Tune-Up Info Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. Thank you for your attention in this matter. Applicant’s Company: Gardex Electronics Co., Ltd. address : No.0309 Bldg B,Marina Bay center,Haixiu Rd,Baoan D Shenzhen,China Signature : Job Title and Dept. : Wei Ma / Manager

External photos of the EUT

Internal Photos of The EUT WiFi Antenna

RF EXPOSURE REPORT FCC Per 47 CFR 2.1093(d) Report Reference No. .................... : FCC ID. ............................................ : MWR1407002802 ZGAGX-7012 Compiled by ( position+printed name+signature) .. : File administrators Martin Ao Supervised by ( position+printed name+signature) .. : Test Engineer Martin Ao Approved by ( position+printed name+signature) .. : Manager Dixon Hao Date of issue ..................................... : July 09, 2014 Representative Laboratory Name . : Maxwell International Co., Ltd. Address ............................................. : Room 509, Hongfa center building, Baoan District, Shenzhen, Guangdong, China Testing Laboratory Name .............. : Shenzhen CTL Testing Technology Co., Ltd. Address ............................................. : Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan,Shenzhen,China Applicant’s name ............................ : Gardex electronics company Limited Address ............................................. : No.0309 Bldg B,Marina Bay center,Haixiu Rd,Baoan District Center Test specification .......................... : Standard ........................................... : FCC Per 47 CFR 2.1093(d) TRF Originator .................................. : Maxwell International Co., Ltd. Master TRF ....................................... : Dated 2011-05 Maxwell International Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Maxwell International Co., Ltd. as copyright owner and source of the material. Maxwell International Co., Ltd. takess no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : MID Trade Mark ....................................... : / Model/Type reference ....................... : UDI7012 Listed Models .................................. : / Manufacturer ................................... : Gardex electronics company Limited Modulation Type ............................... : DSSS(CCK,DQPSK,DBPSK),OFDM(64QAM,16QAM,QPSK, BPSK) Operation Frequency ........................ : From 2412MHz to 2462MHz Rating ............................................... : DC 3.70V Result ................................................ : PASS Page 2 of 9 Report No.: MWR1407002802 RF EXPOSURE REPORT Test Report No. : MWR1407002802 July 09, 2014 ______________________________________________________________________________________________ Date of issue Equipment under Test : MID Model /Type : UDI7012 Listed Models : / Applicant : Gardex electronics company Limited Address : No.0309 Bldg B,Marina Bay center,Haixiu Rd,Baoan District Center Manufacturer : Gardex electronics company Limited Address : No.0309 Bldg B,Marina Bay center,Haixiu Rd,Baoan District Center Test Result : PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Page 3 of 9 Report No.: MWR1407002802 Contents 1. SUMMARY 4 1.1. EUT configuration 4 1.2. NOTE 4 2. TEST ENVIRONMENT 6 2.1. Address of the test laboratory 6 2.2. Environmental conditions 6 2.3. Statement of the measurement uncertainty 6 3. METHOD OF MEASUREMENT 6 3.1. Applicable Standard 6 3.2. Limit 7 3.3. RF Exposure 7 4. CONCLUSION 9 Page 4 of 9 Report No.: MWR1407002802 1. SUMMARY 1.1. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ● - supplied by the manufacturer ○ - supplied by the lab ○ Power Cable Length (m) : / Shield : / Detachable : / ○ Multimeter Manufacturer : / Model No. : / ● AC Adapter Model: HNB050200U Input: 100-240V～50/60Hz 0.35A MAX Output: OUTPUT: 5.0V DC 2A Power Cable: 60cm ○ Shielded ● Unshielded 1.2. Product Description The Gardex electronics company Limited’s Model: UDI7012 or the “EUT” as referred to in this report; more general information as follows, for more details, refer to the user’s manual of the EUT. Name of EUT MID Model Number UDI7012 FCC ID ZGAGX-7012 WLAN Supported 802.11b/802.11g/802.11n Antenna Type Internal WLAN FCC Operation frequency IEEE 802.11b: 2412MHz—2462MHz IEEE 802.11g: 2412MHz—2462MHz IEEE 802.11n HT20: 2412MHz—2462MHz IEEE 802.11n HT40: 2422MHz—2452MHz WLAN Modulation IEEE 802.11b: DSSS(CCK,DQPSK,DBPSK) IEEE 802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n HT20: OFDM (64QAM, 16QAM, QPSK,BPSK) IEEE 802.11n HT40: OFDM (64QAM, 16QAM, QPSK,BPSK) Android Version Android 4.2.2 1.3. NOTE 1. The EUT is a MID with WiFi fuction,The functions of the EUT listed as below: Test Standards Reference Report WiFi FCC Part 15 C 15.247 MWR1407002801 RF Exposure FCC Part 2 §2.1093 MWR1407002802 2. The frequency bands used in this EUT are listed as follows: Frequency Band(MHz) 2400-2483.5 5150-5350 5470-5725 5725-5850 802.11b √ － － － 802.11g √ － － － 802.11n(20MHz) √ － － － 802.11n(40MHz) √ － － － Page 5 of 9 Report No.: MWR1407002802 3. The EUT incorporates a SISO function, physically; the EUT provides one completed transmitter and one completed receiver. Modulation Mode TX Function 802.11b 1TX 802.11g 1TX 802.11n (20MHz) 1TX 802.11n (40MHz) 1TX Page 6 of 9 Report No.: MWR1407002802 2. TEST ENVIRONMENT 2.1. Address of the test laboratory Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen, China The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 (2003) and CISPR Publication 22. 2.2. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15-35 ° C Humidity: 30-60 % Atmospheric pressure: 950-1050mbar 2.3. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors with…

Text truncated - open the document above for the full version.

FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .....................: FCC ID. .............................................: MWR1407002801 ZGAGX-7012 Compiled by ( position+printed name+signature) .. : File administrators Martin Ao Supervised by ( position+printed name+signature) .. : Test Engineer Martin Ao Approved by ( position+printed name+signature) .. : Manager Dixon Hao Date of issue ..................................... : July 09, 2014 Representative Laboratory Name . : Maxwell International Co., Ltd. Address ............................................ : Room 509, Hongfa center building, Baoan District, Shenzhen, Guangdong, China Testing Laboratory Name .............. : Shenzhen CTL Testing Technology Co., Ltd. Address ............................................ : Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan,Shenzhen,China Applicant’s name ............................ : Gardex electronics company Limited Address ............................................ : No.0309 Bldg B,Marina Bay center,Haixiu Rd,Baoan District Center Test specification ...........................: Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Maxwell International Co., Ltd. Master TRF ....................................... : Dated 2011-05 Maxwell International Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Maxwell International Co., Ltd. as copyright owner and source of the material. Maxwell International Co., Ltd. takess no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : MID Trade Mark ....................................... : / Model/Type reference ....................... : UDI7012 Listed Models .................................. : / Manufacturer ................................... : Gardex electronics company Limited Modulation Type ............................... : DSSS(CCK,DQPSK,DBPSK),OFDM(64QAM,16QAM,QPSK, BPSK) Operation Frequency ........................ : From 2412MHz to 2462MHz Rating ............................................... : DC 3.70V Result................................................ : PASS Page 2 of 90 Report No.: MWR1407002801 T E S T R E P O R T Test Report No. : MWR1407002801 July 09, 2014 ______________________________________________________________________________________________ Date of issue Equipment under Test : MID Model /Type : UDI7012 Listed Models : / Applicant : Gardex electronics company Limited Address : No.0309 Bldg B,Marina Bay center,Haixiu Rd,Baoan District Center Manufacturer Gardex electronics company Limited Address : No.0309 Bldg B,Marina Bay center,Haixiu Rd,Baoan District Center Test Result PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Page 3 of 90 Report No.: MWR1407002801 Contents 1. TEST STANDARDS .................................................................. 4 2. SUMMARY ............................................................................. 5 2.1. General Remarks 5 2.2. Product Description 5 2.3. Equipment Under Test 5 2.4. Description of the test mode 5 2.5. Short description of the Equipment under Test (EUT) 5 2.6. EUT operation mode 6 2.7. EUT configuration 6 2.8. Related Submittal(s) / Grant (s) 6 2.9. Modifications 6 2.10. NOTE 6 3. TEST ENVIRONMENT ............................................................... 7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. Environmental conditions 7 3.4. Configuration of Tested System 7 3.5. Test Description 7 3.6. Statement of the measurement uncertainty 8 3.7. Equipments Used during the Test 8 4. TEST CONDITIONS AND RESULTS ............................................ 10 4.1. AC Power Conducted Emission 10 4.2. Radiated Emission 12 4.3. Maximum Peak Output Power 20 4.4. Power Spectral Density 22 4.5. Band Edge Compliance of RF Emission 31 4.6. Spurious RF Conducted Emission 42 4.7. 6dB Bandwidth 73 4.8. Antenna Requirement 82 5. TEST SETUP PHOTOS OF THE EUT .......................................... 83 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ....................... 84 Page 4 of 90 Report No.: MWR1407002801 1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10 : American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v03r02: Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247 Page 5 of 90 Report No.: MWR1407002801 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : July 01, 2014 Testing commenced on : July 01, 2014 Testing concluded on : July 08, 2014 2.2. Product Description The Gardex electronics company Limited’s Model: UDI7012 or the “EUT” as referred to in this report; more general information as follows, for more details, refer to the user’s manual of the EUT. Name of EUT MID Model Number UDI7012 FCC ID ZGAGX-7012 WLAN Supported 802.11b/802.11g/802.11n Antenna Type Internal WLAN FCC Operation frequency IEEE 802.11b: 2412MHz—2462MHz IEEE 802.11g: 2412MHz—2462MHz IEEE 802.11n HT20: 2412MHz—2462MHz IEEE 802.11n HT40: 2422MHz—2452MHz WLAN Modulation IEEE 802.11b: DSSS(CCK,DQPSK,DBPSK) IEEE 802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n HT20: OFDM (64QAM, 16QAM, QPSK,BPSK) IEEE 802.11n HT40: OFDM (64QAM, 16QAM, QPSK,BPSK) Android Version Android 4.2.2 2.3. Equipment Under Test Power supply system utilised Power…

Text truncated - open the document above for the full version.

Test Setup Photos of The EUT_DTS