ZJT-330Portable device contains Wi-Fi and Bluetooth

Using your WIMM Module • Touch and hold the screen to wake your module. • To access your micro apps, slide the watchface up . • To return to the watchface from the app carousel, swipe down . • To view additional apps within the carousel, swipe left or right . • To enter an app, tap or slide its icon up . • To exit an app, swipe down . 1 Turn power on Press the power button. 2 Insert your WIMM Module into the strap Gently press your module into the back side of the strap until it snaps into place. 3 Complete Setup Tip: To enter your wireless security password, swipe left or right to find characters, and then touch a character to select it. Tip: You may need to charge your WIMM Module before completing setup. P/N: 28910006 Printed in China © 2011 WIMM Labs Inc. Note: When the backlight is off, your module is in a low-power, battery-saving state. WIMM One QSG CMYK Finished size: 86mm in X 86mm Flat Size: 430mm X 86mm Accordion fold PMS 172 C Setup • To access the Setup app slide the watchface up . • Tap or slide Setup icon up to enter the app. • Follow the onscreen instructions to complete Setup. 28910006_WIMM_QSG_7-5.indd 2-67/5/11 8:05 PM Using your WIMM Module with your phoneCharging your WIMM Module To use caller ID and other features, pair your WIMM Module with your Bluetooth-enabled phone. Android, iPhone, and Blackberry: Go to m.wimm.com and download the WIMM App to your phone. Other Bluetooth phones: On your WIMM Module, go to Settings, select Bluetooth, and ensure that Bluetooth is On. On your phone, use the Bluetooth feature to pair your WIMM Module. Tips and tricks Change the watchface: Touch and hold the watchface, and then swipe left or right to view available faces. Touch a face to select it. Go back to the watchface from any screen: Swipe down using two fingers. Turn off the backlight: From the watchface, swipe down using two fingers. WIMM One portal Access the WIMM One Portal from your PC or mobile browser to personalize your settings, manage your account, and find and add micro apps for your WIMM Module. Login and learn more at dev.wimm.com. Note: WIMM Module is properly connected when the indicator light is on. WIMM One is discoverable. If prompted for a passkey, use 0000. ON Bluetooth OFF Devices Developer Admin My Watch My Watch 2 My Watch 3 My Watch 4 My Watch 5 General Settings General Settings Time and Date Formats Time and Date Formats Location Set your Smartwatch for 12 or 24 hour time. Location Services Allows applications to access my current loaction. 12 Hour24 Hour Watchfaces Application Settings Time Off-set Always late? Off-set your Smartwatch so you’re on time! Home City Los Altos, CA, USA Your home city is the default location used for time, date, and other apps. 0 minutes fast OnOff change AmericanMetric Sync Interval Sync Interval Sync my device this often. Every 3 hours Date Format (i.e. date/month/year or month/date/year) Unit System Choose American system (Fahrenheit, Feet, Miles) or Metric system (Celsius Centimeters, Kilometers) MM/DD/YYDD/MM/YY Week Start Day What day do you start your week? My Account Welcome [email protected], Sign Out Software Licence Agreement Terms of Service Privacy Policy Support SundayMonday 32mm 36mm 28910006_WIMM_QSG_7-5.indd 7-117/5/11 8:05 PM

Privacy Policy i WIMM One Limited Warrantyand Regulatory Information Privacy Policy 2 CONSUMER RIGHTS AND RESTRICTIONS THE BENEFITS CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN YOUR COUNTRY OF PURCHASE OR COUNTRY OF RESIDENCE. THIS WARRANTY DOES NOT EXCLUDE, LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING OUT OF NONCONFORMITY WITH A SALES CONTRACT. HOWEVER, WIMM LABS DISCLAIMS STATUTORY AND IMPLIED WARRANTIES TO THE EXTENT PERMITTED BY LAW, AND IN SO FAR AS SUCH WARRANTIES CANNOT BE DISCLAIMED, ALL SUCH WARRANTIES SHALL TO THE EXTENT PERMITTED BY LAW BE LIMITED TO THE DURATION OF THE EXPRESS WARRANTY DESCRIBED BELOW AND TO THE REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY WIMM LABS AT ITS SOLE DISCRETION. FURTHER, TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. SOME STATES, PROVINCES, AND COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY LAST, SO THE LIMITATIONS DESCRIBED ABOVE MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. THIS LIMITED WARRANTY IS GOVERNED BY AND CONSTRUED UNDER THE LAWS OF THE COUNTRY IN WHICH THE PRODUCT PURCHASE TOOK PLACE. WARRANTY: WIMM Labs’ warranty obligations for this product are limited to the terms set forth herein. WIMM Labs warrants this WIMM-branded product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original end-user purchaser (“Warranty Period”). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, WIMM Labs will either (1) repair the hardware defect at no charge, using new parts or refurbished parts that are equivalent to new in performance and reliability, (2) exchange the defective product with a product that is new or refurbished, which is equivalent to new in performance and reliability and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. WIMM Labs may request that you replace defective parts with user-installable new or refurbished parts that WIMM Labs provides in fulfillment of its warranty obligation. A replacement product or part, including a user-installable part that has been installed in accordance with instructions provided by WIMM Labs, assumes the remaining warranty of the original product or ninety (90) days from the date of replacement or repair, whichever provides longer coverage for you. Parts provided by WIMM Labs in fulfillment of its warranty obligation must be used in products for which warranty service is claimed. When a refund is given, the product for which the refund is provided must be returned to WIMM Labs and becomes WIMM Labs’ property. EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to the product manufactured by or for WIMM Labs that can be identified by the “WIMM” Privacy Policy 3 trademark, trade name, or logo affixed to it and that has been sold directly to you by WIMM Labs. Manufacturers, suppliers, or publishers, other than WIMM Labs, may provide their own warranties to the end user purchaser, but WIMM Labs, in so far as permitted by law, provides its products “as is”. WIMM Labs does not warrant that the operation of the product will be uninterrupted or error-free. WIMM Labs is not responsible for damage arising from failure to follow instructions relating to the product’s use. This warranty does not apply to (1) consumable parts, such as batteries, or protective coatings designed to diminish over time unless failure has occurred due to a defect in materials or workmanship; (2) cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports; (3) damage caused by use with non-WIMM products; (4) damage caused by accident, abuse, misuse, liquid contact, fire, earthquake or other external causes; (5) damage caused by operating the product outside the permitted or intended uses described by WIMM Labs; (6) damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of WIMM Labs or a WIMM AUTHORIZED SERVICE PROVIDER; (7) a product or part that has been modified to alter functionality or capability without the written permission of WIMM Labs; (8) defects caused by normal wear and tear or otherwise due to the normal aging of the product or (9) any product for which the serial number has been removed or defaced. Important: Do not open the hardware product. Opening the hardware product may cause damage that is not covered by this warranty. Only WIMM Labs or a WIMM AUTHORIZED SERVICE PROVIDER should perform service on this hardware product. EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, WIMM LABS IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, PROGRAMMING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE WIMM PRODUCT AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. WIMM LABS DISCLAIMS ANY REPRESENTATION THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR…

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 77 of 95 10. PHOTOS OF THE EUT Figure 1 General Appearance of the EUT Figure 2 General Appearance of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 78 of 95 Figure 3 Inside of the EUT Figure 4 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 79 of 95 Figure 5 Inside of the EUT Figure 6 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 80 of 95 Figure 7 Inside of the EUT Figure 8 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 81 of 95 Figure 9 Inside of the EUT Figure 10 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 82 of 95 Figure 11 Inside of the EUT Figure 12 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 83 of 95 Figure 13 Inside of the EUT Figure 14 Inside of the EUT BT and WIFI Antenna GPS antenna Top 3.0cm Right 1.9cm Left 1.3cm 0.5cm

R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 84 of 95 Figure 15 Inside of the EUT Figure 16 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 85 of 95 Figure 17 Inside of the EUT Figure 18 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 86 of 95 Figure 19 Inside of the EUT Figure 20 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 87 of 95 Figure 21 Inside of the EUT Figure 22 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 88 of 95 Figure 23 Inside of the EUT Figure 24 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 89 of 95 Figure 25 Inside of the EUT Figure 26 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 90 of 95 Figure 27 Inside of the EUT Figure 28 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 91 of 95 Figure 29 Inside of the EUT Figure 30 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 92 of 95 Figure 31 Inside of the EUT Figure 32 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 93 of 95 Figure 33 Inside of the EUT Figure 34 Power Adapter R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 94 of 95 Figure 35 Power Adapter Figure 36 Power Adapter R AUDIX Technology (Shenzhen) Co., Ltd. Audix Technology (Shenzhen) Co., ltd.. Report No. ACS-SF11002 Page 95 of 95 Figure 37 USB Cable Figure 38 USB Cable

SPORTON INTERNATIONAL INC. Page Number : 1 of 29 TEL : 886-3-327-3456 Report Issued Date : Oct. 19, 2011 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : ZJT-330 FCC SAR Test Report Report No. : FA1O1419 FCC SAR Test Report APPLICANT : PRECENO TECHNOLOGY PTE.LTD. EQUIPMENT : WIMM One MODEL NAME : 330 FCC ID : ZJT-330 STANDARD : FCC 47 CFR Part 2 (2.1093) IEEE C95.1-1991 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was received on Oct. 18, 2011 and completely tested on Oct. 18, 2011. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 29 TEL : 886-3-327-3456 Report Issued Date : Oct. 19, 2011 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : ZJT-330 FCC SAR Test Report Report No. : FA1O1419 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 2.1 Testing Laboratory .................................................................................................................................................. 5 2.2 Applicant ................................................................................................................................................................ 5 2.3 Manufacturer .......................................................................................................................................................... 5 2.4 Application Details .................................................................................................................................................. 5 3. General Information ...................................................................................................................................................... 6 3.1 Description of Device Under Test (DUT) ................................................................................................................ 6 3.2 Product Photos....................................................................................................................................................... 7 3.3 Applied Standards .................................................................................................................................................. 7 3.4 Device Category and SAR Limits ........................................................................................................................... 7 3.5 Test Conditions ....................................................................................................................................................... 7 4. Specific Absorption Rate (SAR) ................................................................................................................................... 8 4.1 Introduction ............................................................................................................................................................ 8 4.2 SAR Definition ........................................................................................................................................................ 8 5. SAR Measurement System ........................................................................................................................................... 9 5.1 E-Field Probe ........................................................................................................................................................10 5.2 Data Acquisition Electronics (DAE) ....................................................................................................................... 11 5.3 Robot .................................................................................................................................................................... 11 5.4 Measurement Server .............................................................................................................................................12 5.5 Phantom ................................................................................................................................................................12 5.6 Device Holder........................................................................................................................................................13 5.7 Data Storage and Evaluation ................................................................................................................................15 5.8 Test Equipment List ...............................................................................................................................................17 6. Tissue Simulating Liquids ...........................................................................................................................................18 7. Uncertainty Assessment .............................................................................................................................................19 8. SAR Measurement Evaluation ....................................................................................................................................21 8.1 Purpose of System Performance check .....................................................…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/10/18 System Check_Body_2450MHz_111018 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_111018 Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; ε r = 52.7; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3754; ConvF(6.84, 6.84, 6.84); Calibrated: 2011/1/11 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/6/24 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 14.8 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 86.8 V/m; Power Drift = -0.075 dB Peak SAR (extrapolated) = 26.6 W/kg SAR(1 g) = 13 mW/g; SAR(10 g) = 5.96 mW/g Maximum value of SAR (measured) = 14.9 mW/g 0 dB = 14.9mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/10/18 #01 802.11b_Front_0cm_Ch1 DUT: 1O1419 Communication System: 802.11b ; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL_2450_111018 Medium parameters used: f = 2412 MHz; σ = 1.92 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3754; ConvF(6.84, 6.84, 6.84); Calibrated: 2011/1/11 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/6/24 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch1/Area Scan (51x191x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.332 mW/g Ch1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 11.9 V/m; Power Drift = -0.106 dB Peak SAR (extrapolated) = 1.01 W/kg SAR(1 g) = 0.324 mW/g; SAR(10 g) = 0.143 mW/g Maximum value of SAR (measured) = 0.346 mW/g 0 dB = 0.346mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/10/18 #01 802.11b_Front_0cm_Ch1_2D DUT: 1O1419 Communication System: 802.11b ; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL_2450_111018 Medium parameters used: f = 2412 MHz; σ = 1.92 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3754; ConvF(6.84, 6.84, 6.84); Calibrated: 2011/1/11 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/6/24 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch1/Area Scan (51x191x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.332 mW/g Ch1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 11.9 V/m; Power Drift = -0.106 dB Peak SAR (extrapolated) = 1.01 W/kg SAR(1 g) = 0.324 mW/g; SAR(10 g) = 0.143 mW/g Maximum value of SAR (measured) = 0.346 mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/10/18 #02 802.11b_Back_0cm_Ch1 DUT: 1O1419 Communication System: 802.11b ; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL_2450_111018 Medium parameters used: f = 2412 MHz; σ = 1.92 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3754; ConvF(6.84, 6.84, 6.84); Calibrated: 2011/1/11 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/6/24 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch1/Area Scan (51x191x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.193 mW/g Ch1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.88 V/m; Power Drift = -0.056 dB Peak SAR (extrapolated) = 0.319 W/kg SAR(1 g) = 0.172 mW/g; SAR(10 g) = 0.081 mW/g Maximum value of SAR (measured) = 0.199 mW/g 0 dB = 0.199mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/10/18 #03 802.11b_Left Side_0cm_Ch1 DUT: 1O1419 Communication System: 802.11b ; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL_2450_111018 Medium parameters used: f = 2412 MHz; σ = 1.92 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3754; ConvF(6.84, 6.84, 6.84); Calibrated: 2011/1/11 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/6/24 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch1/Area Scan (31x191x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.047 mW/g Ch1/Zoom Scan (7x7x9)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.07 V/m; Power Drift = -0.106 dB Peak SAR (extrapolated) = 0.133 W/kg SAR(1 g) = 0.070 mW/g; SAR(10 g) = 0.032 mW/g Maximum value of SAR (measured) = 0.082 mW/g Ch1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.07 V/m; Power Drift = -0.106 dB Peak SAR (extrapolated) = 0.314 W/kg SAR(1 g) = 0.052 mW/g; SAR(10 g) = 0.015 mW/g Maximum value of SAR (measured) = 0.050 mW/g 0 dB = 0.050mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/10/18 #04 802.11b_Top Side_0cm_Ch1 DUT: 1O1419 Communication System: 802.11b ; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL_2450_111018 Medium parameters used: f = 2412 MHz; σ = 1.92 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3754; ConvF(6.84, 6.84, 6.84); Calibrated: 2011/1/11 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn905; Calibrated: 2011/6/24 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch1/Area Scan (41x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.026 mW/g Ch1/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.41 V/m; Power Drift = -0.131 dB Peak SAR (extrapolated) = 0.046 W/kg SAR(1 g) = 0.022 mW/g; SAR(10 g) = 0.0088 mW/g Maximum value of SAR (measured) = 0.029 mW/g 0 dB = 0.026mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011/10/18 #05 802.11b_Bottom Side_0cm_Ch1 DUT: 1O1419 Communication System: 802.11b ; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL_2450_111018 Medium parameters used: f = 2412 MHz; σ = 1.92 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: EX3DV4 - SN3754; ConvF(6.84, 6.84, 6.84); Calibrated: 2011/1/11 …

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZJT-330 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F11148 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of PRECENO TECHNOLOGY PTE.LTD. WIMM One Model Number: 330 FCC ID: ZJT-330 Prepared for : PRECENO TECHNOLOGY PTE.LTD. No. 10 Anson Road, #15-17/18, International Plaza, Singapore 079903 Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Ke Feng Rd., 52 Block, Shenzhen Science & Industrial Park, Nantou, Shenzhen, Guangdong, China Tel: (0755) 26639496 Report Number ： ACS-F11121 Date of Test ： Jul.11~19, 2011 Date of Report ： Jul.19, 2011 R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZJT-330 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F11148 TABLE OF CONTENTS Description Page 1. SUMMARY OF STANDARDS AND RESULTS.......................................................... 1-1 1.1. Description of Standards and Results .................................................................................. 1-1 2. GENERAL INFORMATION ......................................................................................... 2-1 2.1. Description of Device (EUT) ............................................................................................... 2-1 2.2. Test Information................................................................................................................... 2-2 2.3. Block diagram of connection between the EUT and simulators .......................................... 2-2 2.4. Test Facility ......................................................................................................................... 2-3 2.5. Measurement Uncertainty (95% confidence levels, k=2) .................................................... 2-3 3. POWER LINE CONDUCTED EMISSION TEST ....................................................... 3-1 3.1. Test Equipments................................................................................................................... 3-1 3.2. Block Diagram of Test Setup ............................................................................................... 3-1 3.3. Power Line Conducted Emission Test Limits...................................................................... 3-1 3.4. Configuration of EUT on Test ............................................................................................. 3-2 3.5. Operating Condition of EUT................................................................................................ 3-2 3.6. Test Procedure...................................................................................................................... 3-2 3.7. Power Line Conducted Emission Test Results .................................................................... 3-2 4. RADIATED EMISSION TEST ...................................................................................... 4-1 4.1. Test Equipment .................................................................................................................... 4-1 4.2. Block Diagram of Test Setup ............................................................................................... 4-1 4.3. Radiated Emission Limit...................................................................................................... 4-2 4.4. EUT Configuration on Test.................................................................................................. 4-3 4.5. Operating Condition of EUT................................................................................................ 4-3 4.6. Test Procedure...................................................................................................................... 4-3 4.7. Radiated Emission Test Results ........................................................................................... 4-4 5. CONDUCTED SPURIOUS EMISSIONS...................................................................... 5-1 5.1. Test Equipment .................................................................................................................... 5-1 5.2. Limit..................................................................................................................................... 5-1 5.3. Test Procedure.................................................................…

Text truncated - open the document above for the full version.