ZMF-TU600Unit for Fleet Management systems

TU600-X TU600-X Technical Manual Version 1.0, December 2019 TU600-X Trackunit TU600-X, Technical Manual v1.0, December 2019 Page 2 Content Content .......................................................................................................... 2 Introduction .................................................................................................... 7 Related Information .......................................................................................................... 7 Safety first...................................................................................................... 7 Simple Guidelines ............................................................................................................ 7 Do Not Operate Where Prohibited ................................................................................... 7 Interference ...................................................................................................................... 8 Avoid Body Contact with Device during Operation ........................................................... 8 Qualified Service .............................................................................................................. 8 Accessories and Batteries ................................................................................................ 8 Water-Resistance ............................................................................................................. 8 Detailed Safety Information ............................................................................ 8 Exposure to Radio Frequency Signals ............................................................................. 8 Electronic Devices ............................................................................................................ 9 Pacemakers ..................................................................................................................... 9 Other Medical Devices ..................................................................................................... 9 Vehicles ............................................................................................................................ 9 Posted Facilities ............................................................................................................. 10 Aircrafts .......................................................................................................................... 10 Potentially Explosive Atmospheres ................................................................................ 10 For Vehicles Equipped with an Airbag............................................................................ 10 Specific Human Absorption Rates (SAR) ....................................................................... 10 Battery Safety Information .............................................................................................. 11 Automatic battery safety during operation .................................................................. 11 Delivered standard content .......................................................................... 12 Ready-to-Use, No Custom Programming Required ....................................................... 12 Cost-effective, Universally Available Communications ................................. 12 Use location - Children not likely to be present .............................................................. 13 Practical installation advice ............................................................................................ 13 Installation for insurance and anti-theft purpose ............................................................. 13 Connections ................................................................................................................... 14 Power supply .............................................................................................................. 14 Digital inputs ............................................................................................................... 14 Digital output ............................................................................................................... 14 Motion/acceleration sensor ......................................................................................... 14 Installing the TU600-X as to surpass the main switch on the machine. ...................... 15 Functionality check ...................................................................................... 16 “Verify my Trackunit” ...................................................................................................... 17 Troubleshooting ........................................................................................... 18 Installation of the digital output .................................................................... 19 SMS commands for output control ................................................................................. 20 Safety precautions.......................................................................................................... 20 Warranty ...................................................................................................... 20 Technical Assistance/Support and spare parts ............................................ 20 Minimum Information Required for Technical Assistance ............................................... 21 Return Merchandise Authorization - RMA ...................................................................... 21 TU600-X Trackunit TU600-X, Technical Manual v1.0, December 2019 Page 3 Specifications .............................................................................................. 22 Product specifications .................................................................................................... 22 Connections: ......................................................................…

Text truncated - open the document above for the full version.

SILICON LARS Letter of Authorization Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada 3701 Carling Ave. Bldg. 94 Ottawa, On K2H 8S2 Attn:To Whom it May Concern! Application Examiner! Review Engineer! Officer in Charge Re: Authorization to use confidential exhibits Dear Madam or Sir, We, Silicon Laboratories Finland Oy, a corporation validly organized and existing under the laws of Finland, having its principal place of business at Alberga Business Park, Bertel Jungin aukio 3, 02600 Espoo, Finland, hereby authorize CTC advanced GmbH, Untertuerkheimer Str. 6-10, 66117 Saarbruecken, Germany, to use the confidential exhibits that they have on file, such as schematics and test reports, to support an upcoming certification on behalf of their customer, Trackunit NS, Gasvaerksvej 24, 4 sal, DK-9000 Aalborg, Denmark. Details of the end-product(s) to be certified follows: FCC ID: ZMF-TU600 IC: 9746A-TU600, HVIN(s): TU600-1, TU600-2, TU600-3, TU600-4, TU600-5, TU600-6, TU600-7, TU600-8, TU600-9 Details of our module(s), embedded in the end-product(s), of which the exhibits will be used: FCC ID: QOQ13 IC: 5123A-13 HVIN(s): BGM13S32A, BGM1 3532N, BGM1 3S22A, BGM1 3S22N This authorization expires four months from the date of issue. Should there be any query regarding this letter, please do not hesitate to contact the undersigned. Thank you for your attention to this matter. Senior Contact: Pasi Rahikkala Job Title: Staff Hardware Engineer, loT Modules eMail: [email protected] Silicon Laboratories Finland Oy Alberga Business Park Bertel Jungin aukio 3 FI-02600 Espoo, Finland Phone: +358 9 435 5060 www.silabs.com Place and date of issue (of this letter): Espoo, December 17, 2019 Ref: SF00213988

Trackunit A/S ________________________________________________________________________________________________ Gasværksvej 24, DK-9000 Aalborg, +45 96 73 74 00 www.trackunit.com Declaration about Hardware – TU600-x To Whom It May Concern Brand name: Trackunit Product/Model(s): TU600-x (TU600-1, TU600-2, TU600-3, TU600-4, TU600-5, TU600-6, TU600-7, TU600-8, TU600-9) FCC ID: ZMF-TU600 IC: 9746A-TU600 We hereby declare that Product/Model: TU600-x uses the module Product/Model: BGM13S22A (FCC ID: QOQ13 / IC: 5123A-13). No modifications of the module (redesign, component replacements, PCB redesign) have been made. Based on this fact conducted signal measurements of report (Report no “FCC IC RF Test Report 289936-2- 1-2.pdf” dated 2018-01-26) issued for Product/Model: BGM13S22A also apply to Product/Model: TU600-x If you have any questions feel free to contact us at the address shown below Sincerely Per Klaus Nielsen Certification Manager Email: [email protected]

FederalCommunicationCommission EquipmentAuthorizationDevision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 CertificationandEngineeringBureau Innovation,ScienceandEconomicDevelopmentCanada 3701CarlingAve.Bldg.94 Ottawa,OnK2H8S2 2019-12-18 TOWHOMITMAYCONCERN FCCID:XMR201707BG96 IC:10224A-201709BG96 HVIN(s):BG96 Wetheundersigned,herebyauthorizeTrackunitA/S,Gasvaerksvej24,4sal;DK-9000 DenmarktousetheSchematicsandTestReportsoftheabove-mentionedmoduleforthe purposeofthecertification. WeareawarethattheTestresultswillbepublicavailable: FCCID:ZMF-TU600 IC:9746A-TU600, HVIN(s):TU600-1,TU600-2,TU600-3,TU600-4,TU600-5,TU600-6,TU600-7,TU600-8, TU600-9 Sincerely, ____________ JeanHu Manager QuectelWirelessSolutionsCompanyLimited Building5,ShanghaiBusinessParkPhaseIII(AreaB),No.1016TianlinRoad,MinhangDistrict, Shanghai,China,200233

Annex A 1-7390/18-01-01_AnnexA External photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2019-03-26Document No. 1-7390/18-01-01_AnnexA2/6 Photo 3 Photo 4 2019-03-26Document No. 1-7390/18-01-01_AnnexA3/6 Photo 5 Photo 6 2019-03-26Document No. 1-7390/18-01-01_AnnexA4/6 Photo 7 Photo 8 2019-03-26Document No. 1-7390/18-01-01_AnnexA5/6 Document history VersionApplied changesDate of release initial release2019-03-26 - END OF DOCUMENT - 2019-03-26Document No. 1-7390/18-01-01_AnnexA6/6

TU600 labels for external marking.docx Trackunit A/S, Gasværksvej 24, DK-9000 Aalborg, +45 96 73 74 00 www.trackunit.com TU600 labels for external marking, standard. Variant 1: TU600-1 Variant 2: TU600-2 Variant 3: TU600-3 Variant 4: TU600-4 Variant 5: TU600-5 Variant 6: TU600-6 Variant 7: TU600-7 Variant 8: TU600-8 Variant 9: TU600-9 TU600 labels for external marking.docx Trackunit A/S, Gasværksvej 24, DK-9000 Aalborg, +45 96 73 74 00 www.trackunit.com TU600 device label. Label print out and placement.

Annex B 1-7390/18-01-01_AnnexB Internal photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2019-03-26Document No. 1-7390/18-01-01_AnnexB2/5 Photo 3 Photo 4 2019-03-26Document No. 1-7390/18-01-01_AnnexB3/5 Photo 5 Photo 6 2019-03-26Document No. 1-7390/18-01-01_AnnexB4/5 Document history VersionApplied changesDate of release initial release2019-03-26 - END OF DOCUMENT - 2019-03-26Document No. 1-7390/18-01-01_AnnexB5/5

© CTC advanced GmbH Page 1 of 4 BNetzA - CAB - 02/21 - 102 D - P L - 1 2 0 7 6 - 0 1 - 0 3 Maximum Permissible Exposure (MPE) & Exposure evaluation Report identification number: 1-7390/18-01-12 MPE (FCC_ISED) Certification numbers and labeling requirements FCC ID ZMF-TU600 ISED number 9746A-TU600 HVIN (Hardware Version Identification Number) TU600-1, TU600-2, TU600-3, TU600-4, TU600-5, TU600-6, TU600-7,TU600-8,TU600-9 PMN (Product Marketing Name) Trackunit FVIN (Firmware Version Identification Number) -/- HMN (Host Marketing Name) -/- This report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Report no.: 1-7390/18-01-12 © CTC advanced GmbH Page 2 of 4 EUT technologies: Technologies: Max. AVG output power* [dBm] Frequency range (MHz) GSM 850 26.0 835 GSM 1900 23.0 1900 LTE FDD 2 25.0 1900 LTE FDD 4 25.0 1750 LTE FDD 5 25.0 835 LTE FDD 12 25.0 710 LTE FDD 13 25.0 780 LTE FDD 26 25.0 850 BT BR-EDR (GFSK) 10.0 2450 BT BR-EDR (8 DPSK) 10.0 2450 BT LE 10.0 2450 )* declared by manufacturer Prediction of MPE limit at given distance - FCC Equation from page 18 of OET Bulletin 65, Edition 97-01 S = PG / 4π R 2 where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna PG = Output Power including antenna gain The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) Report no.: 1-7390/18-01-12 © CTC advanced GmbH Page 3 of 4 Prediction: worst case This prediction demonstrates the following: The power density levels for FCC at a distance of 20 cm are below the maximum levels allowed by regulations. Technologies: GSM 850 LTE FDD 12 LTE FDD 26 LTE FDD 2 BT Frequency (MHz) 835 710 850 1900 2450 PG Declared max power (EIRP, Ant.Gain 0dB) 26.0 25.0 25.0 25.0 10.0 dBm R Distance 20 20 20 20 20 cm S MPE limit for uncontrolled exposure 0.56 0.47 0.57 1 1 mW/cm 2 Calculated Power density: 0.08 0.06 0.06 0.06 0.00 mW/cm² Calculated percentage of Limit: 14.23% 13.30% 11.11% 6.29% 0.20% Scenario 1: GSM 850 + BT 2.4 MHz Calculated percentage of Limit: Scenario 2: LTE FDD 12 + BT 2.4 MHz Calculated percentage of Limit: Scenario 3: LTE FDD 26 + BT 2.4 MHz Calculated percentage of Limit: Scenario 3: LTE FDD 2 + BT 2.4 MHz Calculated percentage of Limit: 14.43% 13.50% 11.31% 6.49% Collocation: Report no.: 1-7390/18-01-12 © CTC advanced GmbH Page 4 of 4 Prediction of MPE limit at given distance - ISED RSS-102, Issue 5, 2.5.2 RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance); • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ 0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance); • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10 -2 ƒ 0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz; • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). Prediction: worst case GSM 850GSM 1900LTE FDD 12LTE FDD 2BT Frequency835190071019002450MHz RDistance2020202020cm PG Maximum EIRP (Ant.Gain 0dBi)2623252510dBm PG Maximum EIRP (Ant.Gain 0dB)398.1199.5316.2316.210.0mW Exclusion Limit from above:1.302.281.162.282.71W Calculated percentage of Limit: 30.62%8.75%27.18%13.87%0.37% Scenario 1: GSM 850 + BT 2.4 MHz Calculated percentage of Limit: Scenario 2: GSM 1900 + BT 2.4 MHz Calculated percentage of Limit: Scenario 3: LTE FDD 12 + BT 2.4 MHz Calculated percentage of Limit: Scenario 4: LTE FDD 2 + BT 2.4 MHz Calculated percentage of Limit: 14.24% Collocation: 30.99% 9.12% 27.54%

D-PL-12076-01-03 TEST REPORT Test report no.: 1-7390/18-01-11-A Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-04 and 05 Trackunit A/S Gasvaerksvej 24, 4sal 9000 Aalborg / DENMARK Phone: +45 96 73 74 00 Contact: Per Klaus Nielsen e-mail: [email protected] Phone: +45 96 73 74 00 Manufacturer Trackunit A/S Gasvaerksvej 24, 4sal 9000 Aalborg / DENMARK Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence - Exempt Local Area Network (LE-LAN) Devices RSS - Gen Issue 5 Spectrum Management and Telecommunications Radio Standards Specification - General Requirements for Compliance of Radio Apparatus For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Telemetric unit for machinery, vehicles etc. Model name: TU600 FCC ID: ZMF-TU600 IC: 9746A-TU600 Frequency: DTS band 2400 MHz to 2483.5 MHz Technology tested: Bluetooth ® LE Antenna: Integrated PCB antenna Power supply: 12 V DC by external power supply Temperature range: -30°C to +55°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Marco Bertolino Alexander Becker Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Test report no.: 1-7390/18-01-11-A © CTC advanced GmbH Page 2 of 36 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 2.3 Test laboratories sub-contracted ...................................................................................................... 3 3 Test standard/s and references .................................................................................................................... 4 4 Test environment ............................................................................................................................................ 5 5 Test item .......................................................................................................................................................... 5 5.1 General description ............................................................................................................................. 5 5.2 Additional information ........................................................................................................................ 5 6 Description of the test setup ......................................................................................................................... 6 6.1 Shielded semi anechoic chamber ...................................................................................................... 7 6.2 Shielded fully anechoic chamber ...................................................................................................... 8 6.3 Radiated measurements > 18 GHz ..................................................................................................... 9 7 Sequence of testing ..................................................................................................................................... 10 7.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ............................................................... 10 7.2 Sequence of testing radiated spurious 30 MHz to 1 GHz .............................................................. 11 7.3 Sequence of testing radiated spurious 1 GHz to 18 GHz .............................................................. 12 7.4 Sequence of testing radiated spurious above 18 GHz .................................................................. 13 8 Measurement uncertainty ............................................................................................................................ 14 9 Summary of measurement results ............................................................................................................. 15 10 Additional comments ............................................................................................................................... 16 11 Measurement results ................................................................................................................................ 17 11.1 Radiated peak power ..................................................................................................................... 17 11.2 Band edge compliance radiated ................................................................................................... 18 11.3 Spurious emissions radiated below 30 MHz ............................................................................... 20 11.4 Spurious emissions radiated 30 MHz to 1 GHz ......................…

Text truncated - open the document above for the full version.

Reference number: 289936-2-1-2 Page 2 of 58 Table of Contents PRODUCT DESCRIPTION .................................................................................................................................. 3 Equipment Under Test (EUT) .......................................................................................................................... 3 Description of the EUT .................................................................................................................................... 3 Ratings and Declarations ................................................................................................................................ 3 Power Supply .................................................................................................................................................. 3 Mechanical Size of the EUT ............................................................................................................................ 3 Samples ........................................................................................................................................................... 4 GENERAL REMARKS .......................................................................................................................................... 5 Disclaimer ........................................................................................................................................................ 5 SUMMARY OF TESTING ..................................................................................................................................... 6 EUT Test Conditions during Testing ............................................................................................................... 6 TEST RESULTS ................................................................................................................................................... 8 Conducted Emissions In The Frequency Range 150 kHz - 30 MHz ............................................................... 8 Maximum Peak Conducted Output Power ...................................................................................................... 11 Transmitter Radiated Spurious Emissions 30 - 26500 MHz ........................................................................... 17 Transmitter Band Edge Measurement and Conducted Spurious Emissions .................................................. 37 6 dB Bandwidth of the Channel ....................................................................................................................... 44 Power Spectral Density ................................................................................................................................... 48 99% Occupied Bandwidth ............................................................................................................................... 52 TEST EQUIPMENT .............................................................................................................................................. 58 Reference number: 289936-2-1-2 Page 3 of 58 Product Description PRODUCT DESCRIPTION Equipment Under Test (EUT) Trade mark: Silicon Labs Model: BGM13S32A, BGM13S32N, BGM13S22A, BGM13S22N Type: Bluetooth Low Energy Module Serial no: - FCC ID: QOQ13 IC: 5123A-13 Description of the EUT BGM13S32 (max power 19 dBm), Bluetooth low energy module with two antenna variants (A / N). BGM13S22 (max power 10 dBm), Bluetooth low energy module with two antenna variants (A / N). Variant A is equipped with chip antenna while the N variant has RF pin for the use of external antenna. Classification of the device Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT One sample was modified to allow conducted measurements to be made. Ratings and Declarations Operating Frequency Range (OFR): 2402 - 2480 MHz Channels: 40 Channel separation: 2 MHz Effective conducted power: 18.46 dBm (Peak) Modulation: GFSK Integral Antenna gain: A-variant: 1 dBi External Antenna gain: N-variant: 2.14 dBi Power Supply Operating voltage range: 2.0 - 3.8 VDC (tested with 3.3V regulated by the development board) Separate AC/DC adaptor, Huawei model: HW-050100E01 (115 V, 60 Hz input / 5 V output) was used during the tests to power up the development board which feeds the module (EUT) during AC emissions test. Supply is not provided by the manufacturer. In other tests the development board was supplied with laboratory power supply. Mechanical Size of the EUT Height: 2 mm Width: 20 mm Length: 15 mm Reference number: 289936-2-1-2 Page 4 of 58 Product Description Samples EUT Description 1. BGM13S32N Original N variant with RF pin for external antenna 2. BGM13S32A Original A variant, equipped with chip antenna 3. BGM13S32A Modified A variant, Short RF cable added for conducted tests 4. BGM13S22N Original N variant with RF pin for external antenna Reference number: 289936-2-1-2 Page 5 of 58 General remarks GENERAL REMARKS Disclaimer This document is issued by the Company under its General Conditions of service accessible at http://www.sgs.com/terms_and_conditions.htm. attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the s…

Text truncated - open the document above for the full version.

Annex D 1-7390/18-01-01_AnnexD Setup photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2019-03-26Document No. 1-7390/18-01-01_AnnexD2/7 Photo 3 Photo 4 2019-03-26Document No. 1-7390/18-01-01_AnnexD3/7 Photo 5 Photo 6 2019-03-26Document No. 1-7390/18-01-01_AnnexD4/7 Photo 7 Photo 8 2019-03-26Document No. 1-7390/18-01-01_AnnexD5/7 Photo 9 Photo 10 2019-03-26Document No. 1-7390/18-01-01_AnnexD6/7 Document history VersionApplied changesDate of release initial release2019-03-26 - END OF DOCUMENT - 2019-03-26Document No. 1-7390/18-01-01_AnnexD7/7