ZMOFG101NA20LTE Module

FG101-NA (FCC ID：ZMOFG101NA20) Hardware Guide V1.0 Disclaimer This document serves as a guide for the use of products. Customers must design their products according to the information provided in the document. The Company shall not be liable for any damage caused by failure to comply with relevant operation or design specifications or safety rules. Due to product version upgrade or other reasons, the Company reserves the right to modify any information in this document at any time without prior notice and any responsibility. Unless otherwise agreed, all statements, information and suggestions in this document do not constitute any express or implied guarantee. Copyright Notice Copyright © 2023 Fibocom Wireless Inc. All rights reserved. Unless specially authorized by the Company, the recipient of the documents shall keep the documents and information received confidential, and shall not use them for any purpose other than the implementation and development of this project. Without the written permission of the Company, no unit or individual shall extract or copy part or all of the contents of this document without authorization, or transmit them in any form. The Company has the right to investigate legal liabilities for any offense and tort in connection with violation of confidentiality obligations, or unauthorized use or malicious use of the said documents and information in other illegal forms. Trademark Statement The trademark is registered and owned by Fibocom Wireless Inc. Other trademarks, product names, service names and company names appearing in this document are owned by their respective owners. Contact Information Website: https://www.fibocom.com Address: 10/F-14/F, Block A, Building 6, Shenzhen International Innovation Valley, Dashi First Road, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen Tel: 0755-26733555 Safety Instructions Do not operate wireless communication products in areas where the use of radio is not recommended without proper equipment certification. These areas include environments that may generate radio interference, such as flammable and explosive environments, medical devices, aircraft or any other equipment that may be subject to any form of radio interference. The driver or operator of any vehicle shall not operate wireless communication products while controlling the vehicle. Doing so will reduce the driver's or operator's control and operation of the vehicle, resulting in safety risks. Wireless communication devices do not guarantee effective connection under any circumstances, such as when the (U) SIM card is invalid or the device is in arrears. In an emergency, please use the emergency call function when the device is turned on, and ensure that the device is located in an area with sufficient signal strength. Contents Copyright © Fibocom Wireless Inc. 1 Contents Change History .................................................................................................. 5 1 Foreword ......................................................................................................... 6 1.1 Document Description ............................................................................................... 6 1.2 Safety Instructions ........................................................................................................ 6 1.3 Safety Instructions ........................................................................ 错误!未定义书签。 1.3.1 Important Notice to OEM integrators ............................................................... 7 1.3.2 FCC Statement ........................................................................................................ 9 2 Product Overview ......................................................................................... 12 2.1 Product Introduction ................................................................................................. 12 2.2 Product Specifications ............................................................................................... 12 2.2.1 Radio Frequency Features ................................................................................. 12 2.2.2 Other Key Features ............................................................................................. 13 2.3 Supported CA Combinations ................................................................................... 15 2.4 Functional Block Diagram ........................................................................................ 18 2.5 Evaluation Board ........................................................................................................ 19 3 Pin Definition ................................................................................................ 20 3.1 Pin Distribution .......................................................................................................... 20 3.2 Pin Function ................................................................................................................. 22 4 Electrical Characteristics ............................................................................. 32 4.1 Limit Voltage Range .................................................................................................. 32 4.1.1 Absolute Limit Voltage ........................................................................................ 32 4.1.2 Operating Limit Voltage ..................................................................................... 32 4.2 Power Consumption .................................................................................................. 33 5 Functional Interface ..................................................................................... 36 5.1 Power Supply .............................................................................................................. 36 5.1.1 Power Input ............................................................................................…

Text truncated - open the document above for the full version.

Fibocom Wireless Inc. To: Federal Communications Commission Date: 2023/06/19 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Fibocom Wireless Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Fibocom Wireless Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification:LTE Module FCC ID:ZMOFG101NA20 If you have any questions, please feel free to contact me Contact Person: Patrick Ma Position in the Company: Certification Director Date of Signature: 2023-06-19 ___________________________ Signatory (signature of the applicant)

Fibocom Wireless Inc. 1101,Tower A, Building 6, Shenzhen International, Innovation Valley, Dashi 1st Rd, Nanshan, ShenZhen, China Tel: +8675526733555 ; Fax: +86-755-26520841 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, [Fibocom Wireless Inc. Grantee Code ZMO] (“the applicant”) certifies that, as of the date of the filing of application, [Fibocom Wireless USA] (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information of agent are: U.S. Agent: Fibocom Wireless USA FCC Registration Number (FRN): 0033437914 Physical U.S. address: 5909 Peachtree Dunwoody Rd Ste 910 Atlanta, GA 30328 United States Contact: Lei Yao Phone: +01 (469)463-6983 Email: [email protected] The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent Name: Patrick Ma Email: [email protected] Date: April 21, 2023 Name: Lei Yao Email: [email protected] Date: April 21, 2023

Fibocom Wireless Inc. Date: 2023-06-19 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Fibocom Wireless Inc., the undersigned, hereby authorizes Miss. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Fibocom Wireless Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID:ZMOFG101NA20 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Fibocom Wireless Inc. in connection with the Application shall have the same effect as acts of the Fibocom Wireless Inc.. Fibocom Wireless Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name:Patrick Ma Title:Certification Director Tel:+8675526733555 Email: [email protected] Company name: Fibocom Wireless Inc.

Fibocom Wireless Inc. Date:2023-06-19 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: ZMOFG101NA20 To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Fibocom Wireless Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Fibocom Wireless Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 BOM SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory: Name:Patrick Ma Company name:Fibocom Wireless Inc. Address:1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Tel: +8675526733555 Email: [email protected]

Fibocom Wireless Inc. version01 Modular Approval Request Letter Date: 2023-06-20 FCC ID: ZMOFG101NA20 Type of Equipment: LTE Module, FG101‐NA The following requirements according to FCC Part 15.212 are met: i RF shielding The radio portion has his own shielding (see external photos). ii Buffered modulation/data inputs has been integrated in the chipset iii Power supply regulation is integrated iv Antenna requirements section 15.203, 15.204 b and 15.204 c The module comes with one permanently attached antennas. The spurious emission requirements are fulfilled (see attached test report). v Stand alone test configuration Please referring to test set up configuration photo vi Labelling The module has its own label. The instruction for labelling rules for the host device has been stated in the users manual vii Compliance on specific rule or operating requirements The required FCC rules has been fulfilled and all instructions for maintaining compliance has been clearly stated in the users manual viii RF Exposure RF exposure requirements are fulfilled for mobile configuration. The installation of the module is restricted to mobile host devices what is clearly stated in the installation instruction of the user manual. For portable applications OEM integrators need SAR evaluation and an own FCC ID. Name: Patrick Ma Title: Certification Director Company: Fibocom Wireless Inc.

FCC ID: ZMOFG101NA20 External Photos 1. EUT front view 2. EUT rear view

FCC ID: ZMOFG101NA20 Internal Photos 1. EUT uncover view

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen ,GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23060216S02 Annex B Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacture document. 926294009538131214131513413241824233 966298009938153716381738435744074458 1852.418801907.61712.41732.61752.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps23.5123.5823.5224.5023.1923.2623.1524.5023.5823.6523.6024.50 3GPP Rel 5HSDPA Subtest-123.3423.2623.2524.5023.0623.0623.2524.5023.2623.3523.2824.50 3GPP Rel 5HSDPA Subtest-223.3423.2723.2524.5023.0723.0123.2424.5023.2523.3023.2524.50 3GPP Rel 5HSDPA Subtest-322.8722.8022.7824.0022.5722.5322.7524.0022.7523.0622.7624.00 3GPP Rel 5HSDPA Subtest-422.8822.8122.7824.0022.5722.5222.7324.0022.7523.0522.7624.00 3GPP Rel 8DC-HSDPA Subtest-123.2523.2523.3624.5023.0023.0623.1824.0023.0823.0022.9624.00 3GPP Rel 8DC-HSDPA Subtest-223.3823.2323.2824.5023.1123.1223.1424.0023.0622.9823.1024.00 3GPP Rel 8DC-HSDPA Subtest-322.7822.8722.7724.0022.6322.5522.8023.5022.5522.5622.6523.50 3GPP Rel 8DC-HSDPA Subtest-422.8422.8322.7724.0022.6022.4822.6423.5022.6622.5722.5523.50 3GPP Rel 6HSUPA Subtest-122.0722.5122.7023.5022.2122.4022.2723.5021.6421.8122.9223.50 3GPP Rel 6HSUPA Subtest-221.9421.9922.1923.0021.6721.9121.7422.5021.9222.0922.4023.50 3GPP Rel 6HSUPA Subtest-322.1022.5322.7123.5021.8222.3922.2522.5022.4422.6122.8423.50 3GPP Rel 6HSUPA Subtest-422.4122.4722.6823.5021.7822.4222.2423.0022.3822.5722.8723.50 3GPP Rel 6HSUPA Subtest-522.4722.5022.6923.5022.2022.3922.2923.5022.4122.5822.8123.50 3GPP Rel 7 HSPA+ (16QAM) Subtest-122.7822.7822.9123.5022.9622.8322.6323.5021.8321.6821.3022.50 Cable Loss0.8Cable Loss0.8Cable Loss0.8 Max.23.58Max.23.26Max.23.65 Conducted Power BandWCDMA Band II (dBm)WCDMA Band IV (dBm)WCDMA Band V (dBm) TX Channel Rx Channel Frequency (MHz) Tune-up Limit (dBm) Tune-up Limit (dBm) Tune-up Limit (dBm) Attenuator Mode MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23060216S02 BW [MHz]ModulationRB SizeRB Offset Low Channel Middle Channel High Channel BW [MHz] ModulationRB SizeRB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK1023.3123.2023.1820QPSK1022.8222.8022.76 20QPSK14923.2523.1723.1420QPSK14922.8022.6622.68 20QPSK19923.1623.1223.1020QPSK19922.7122.5622.51 20QPSK50022.3622.2522.2320QPSK50021.8521.7721.81 20QPSK502422.2422.2022.1520QPSK502421.7421.7821.80 20QPSK505022.1322.1122.0620QPSK505021.7621.7521.66 20QPSK100022.1822.1622.1320QPSK100021.7021.7021.61 2016QAM1022.4322.4122.342016QAM1021.8821.8721.70 2016QAM14922.2922.3022.212016QAM14921.7021.8321.61 2016QAM19922.2222.2422.182016QAM19921.7121.8021.58 2016QAM50021.2521.2221.192016QAM50020.7920.7620.86 2016QAM502421.2121.1721.202016QAM502420.8620.7020.72 2016QAM505021.1421.0221.122016QAM505020.5620.6620.54 2016QAM100021.1521.1321.102016QAM100020.8320.7720.78 2064QAM1021.4021.3621.282064QAM1020.9520.8920.75 2064QAM14921.3221.2521.192064QAM14920.9620.9120.89 2064QAM19921.2621.2321.212064QAM19920.8620.7621.01 2064QAM50020.2420.2120.162064QAM50019.8819.8519.76 2064QAM502420.2020.1520.132064QAM502419.7419.8419.92 2064QAM505020.1120.1020.052064QAM505019.7619.5719.89 2064QAM100020.1820.1620.142064QAM100019.8419.7719.54 186751890019125 200252017520325 1857.5 18801902.51717.51732.5 1747.5 15QPSK1023.2823.2323.1715QPSK1022.7822.7522.72 15QPSK13723.1923.1623.2015QPSK13722.7222.6022.70 15QPSK17423.2223.0423.1315QPSK17422.6322.7222.62 15QPSK36022.3522.3822.2315QPSK36021.9021.8021.73 15QPSK362022.2022.0722.1215QPSK362021.8821.7421.77 15QPSK363922.2522.1322.2315QPSK363921.7421.6321.66 15QPSK75022.2622.3522.3215QPSK75021.8321.6021.71 1516QAM1022.5522.4922.191516QAM1021.8521.8821.75 1516QAM13722.3422.5122.441516QAM13721.7821.8521.63 1516QAM17422.1422.4022.181516QAM17421.7121.7321.70 1516QAM36021.2721.1521.131516QAM36020.7820.7720.81 1516QAM362021.2621.1321.261516QAM362020.6820.7420.70 1516QAM363921.1821.0221.221516QAM363920.6420.6520.53 1516QAM75021.3220.9921.141516QAM75020.7320.5520.71 1564QAM1021.4521.2221.231564QAM1020.9020.8520.81 1564QAM13721.3321.2221.111564QAM13720.8320.8120.73 1564QAM17421.2821.2721.221564QAM17420.8420.6520.76 1564QAM36020.3620.1720.161564QAM36019.8019.7219.64 1564QAM362020.0919.9620.121564QAM362019.7119.8419.89 1564QAM363920.1720.2820.001564QAM363919.8919.7519.63 1564QAM75020.2620.0420.101564QAM75019.8219.8119.79 186501890019150200002017520350 18551880190517151732.51750 10QPSK1023.2723.2323.1910QPSK1022.7922.7722.74 10QPSK12523.2123.1722.9410QPSK12522.7722.7122.60 10QPSK14923.2623.0723.16 10QPSK14922.61 22.5422.75 10QPSK25022.3722.2022.1810 QPSK25021.8521.7621.84 10QPSK251222.2922.3422.1410QPSK251221.7921.7721.79 10QPSK252522.1622.0022.3010QPSK252521.6321.7921.60 10QPSK50022.1622.2522.3610QPSK50021.8421.7621.78 1016QAM1022.4022.3822.261016QAM1021.9221.9521.83 1016QAM12522.1922.1022.421016QAM12521.8621.8221.83 1016QAM14922.3722.2922.341016QAM14921.9221.7721.85 1016QAM25021.2421.3421.131016QAM25020.6520.8420.63 1016QAM251221.3821.3021.311016QAM251220.9020.8620.85 1016QAM252521.1421.2721.321016QAM252520.8620.8420.86 1016QAM50021.1821.1521.141016QAM50020.8320.8320.67 1064QAM1021.4021.4121.241064QAM1020.8420.8120.90 1064QAM12521.1921.1921.221064QAM12520.7320.7620.90 1064QAM14921.2521.0821.201064QAM14920.9720.8620.75 1064QAM25020.2720.3520.331064QAM25019.9819.9319.79 1064QAM251220.3120.1220.191064QAM251219.8619.7319.62 1064QAM252520.2120.1020.041064QAM252519.9219.6919.63 1064QAM50020.3120.1219.981064QAM50019.6819.8419.69 186251890019175199752017520375 1852.518801907.51712.5…

Text truncated - open the document above for the full version.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 13 REPORT No.：SZ23060216S02 RF EXPOSURE EVALUATION REPORT APPLICANT : Fibocom Wireless Inc. PRODUCT NAME : LTE Module MODEL NAME : FG101-NA BRAND NAME : Fibocom FCC ID : ZMOFG101NA20 STANDARD(S) : FCC 47 CFR Part 2(2.1091) RECEIPT DATE : 2023-06-19 TEST DATE : 2023-06-26 ISSUE DATE : 2023-07-20 Edited by: Xie Yiyun (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23060216S02 Page 2 of 13 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1 Applicant and Manufacturer Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2 Equipment under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.3 Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 2. Device Category and RF Exposure Limit ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 3. Test Equipment List ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 4. RF Output Power ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 5. LTE Carrier Aggregation ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 6. RF Exposure Assessment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 Annex A General Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 13 Annex B Conducted Power Change History Version Date Reason for Change 1.0 2023-07-20 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23060216S02 Page 3 of 13 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Fibocom Wireless Inc. Applicant Address: 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Manufacturer Address: 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China 1.2 Equipment under Test (EUT) Description Product Name: LTE Module EUT No.: 2# Hardware Version: V1.2 Software Version: 19101.1000.01.00.20.01 Frequency Bands: WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz LTE Band 29(RX): 717 MHz ~728 MHz LTE Band 30: 2305 MHz ~ 2315 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 46(RX): 5150 MHz ~ 5925 MHz LTE Band 48: 3550 MHz ~3700 MHz LTE Band 66: 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz Modulation Mode: WCDMA: QPSK,16QAM MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23060216S02 Page 4 of 13 LTE: QPSK,16QAM, 64QAM Carrier Aggregation: Downlink only Antenna Type: WWAN: Fixed External Antenna Antenna Gain: Frequency Bands Antenna Gain (dBi) WCDMA Band II 4.07 WCDMA Band IV 4.07 WCDMA Band V 2.2 LTE Band 2 4.07 LTE Band 4 4.07 LTE Band 5 2.2 LTE Band 7 4.07 LTE Band 12 2.2 LTE Band 13 2.2 LTE Band 14 2.2 LTE Band 17 2.2 LTE Band 25 4.07 LTE Band 26 2.2 LTE Band 30 0.22 LTE Band 41 4.07 LTE Band 48 -1.18 LTE Band 66 4.07 LTE Band 71 2.2 Note: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23060216S02 Page 5 of 13 1.3 Applied Reference Documents Leading reference documents for testing: Identity Document Title Method determination /Remark FCC 47 CFR Part 2(2.1091) Radio Frequency Radiation Exposure Assessment: mobile devices No deviation KDB 447498 D01v06 General RF Exposure Guidance No deviation Note 1: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in…

Text truncated - open the document above for the full version.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confi rmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 Long Chang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 8 REPORT No.：SZ23060216W03 TEST REPORT APPLICANT : Fibocom Wireless Inc. PRODUCT NAME : LTE Module MODEL NAME : FG101-NA BRAND NAME : Fibocom FCC ID : ZMOFG101NA20 STANDARD(S) : 47 CFR Part 96.47 RECEIPT DATE : 2023-06-19 TEST DATE : 2023-07-07 ISSUE DATE : 2023-07-18 Edited by: Li Huaijie (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 Long Chang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 8 REPORT No.：SZ23060216W03 DIRECTORY 1. Technical Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 3 1.1. Applicant and Manufacturer Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 3 1.2. Equipment Under Test (EUT) Description ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 3 2. Summary Test Results and Description ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 2.1. Applied Reference Documents ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 2.2. Environmental Conditions ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 2.3. Test Results Lists ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 2.4. Test Equipment list ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 Annex A Testing Laboratory Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 Change History Version Date Reason for change 1.0 2023-07-18 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 Long Chang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 8 REPORT No.：SZ23060216W03 1. Technical Information Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: Fibocom Wireless Inc. Applicant Address: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Manufacturer Address: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China 1.2. Equipment Under Test (EUT) Description Product Name: LTE Module Sample No.: 1# Hardware Version: V1.2 Software Version: 19101.1000.01.00.20.01 Modulation Type: QPSK, 16QAM, 64QAM Carrier Aggregation: Support DL Operation Band: Band 48 Frequency Range: LTE Band 48 Tx: 3550MHz–3700MHz Rx: 3550MHz–3700MHz Channel Bandwidth LTE Band 48 5MHz,10MHz,15MHz,20MHz Antenna Type: Fixed External Antenna Antenna Gain: LTE Band 48 -1.18 dBi MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 Long Chang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 8 REPORT No.：SZ23060216W03 2. Summary Test Results and Description 2.1. Applied Reference Documents Reference documents for testing: Identity Document Title FCC Part 96 CITIZENS BROADBAND RADIO SERVICE ANSI C63.26 American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services KDB 971168 D01 MEASUREMENT GUIDANCE FOR CERTIFICATION OFLICENSED DIGITAL TRANSMITTERS 2.2. Environmental Conditions During the measurement, the environmental conditions were within the listed ranges: 2.3. Test Results Lists No. Test Description Result Part96.47 End User Device Additional Requirements (CBSD Protocol) P 2.4. Test Equipment list Description Series Number Type Manufacture Cal. Date Cal. Due Spectrum Analyzer MY54170556 N9030A Keysight 2022.10.10 2023.10.09 Temperature (°C): 15-35 Relative Humidity (%): 30-60 Atmospheric Pressure (kPa): 86-106 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 Long Chang …

Text truncated - open the document above for the full version.