ZMOFM150NA5G Module

FIBOCOM FM150-NA Hardware User Manual Version: V1.0.0 Date: 2020-08-20 Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved. FIBOCOM FM150-NA User Manual Page 2 of 72 Applicability Table No. Product model Description 1 FM150-NA 5G communication module with M.2 interface FIBOCOM_FM150-NA Hardware User Manual_Draft Version：1.0.2 Date：2020-02-09 Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved. FIBOCOM FM150-NA User Manual Page 3 of 72 Copyright Copyright © 2020 Fibocom Wireless Inc. All rights reserved. Without the prior written permission of the copyright holder, any company or individual is prohibited to excerpt, copy any part of or the entire document, or distribute the document in any form. Notice The document is subject to update from time to time owing to the product version upgrade or other reasons. Unless otherwise specified, the document only serves as the user guide. All the statements, information and suggestions contained in the document do not constitute any explicit or implicit guarantee. Trademark The trademark is registered and owned by Fibocom Wireless Inc. Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved. FIBOCOM FM150-NA User Manual Page 4 of 72 Version Record Versi on Author Assessor Approver Update date Remark V1.0.0 2020-08-18 Initial version Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved. FIBOCOM FM150-NA User Manual Page 5 of 72 Contents 1 Foreword ....................................................................................................................... 8 1.1 Introduction ................................................................................................................... 8 1.2 Reference Standard ..................................................................................................... 8 1.3 Related Documents ...................................................................................................... 9 2 Overview ......................................................................................................................10 2.1 Introduction ................................................................................................................. 10 2.2 Specification ............................................................................................................... 10 2.3 CA combinations ......................................................................................................... 12 2.4 EN-DC Combinations ................................................................................................. 14 2.5 Waring ........................................................................................................................ 20 2.5.1 Important Notice to OEM integrators ............................................................................ 20 2.5.2 FCC Statement ............................................................................................................. 22 2.5.3 IC Statement ................................................................................................................. 23 2.6 Application Framework ............................................................................................... 25 3 Application Interface ...................................................................................................26 3.1 M.2 Interface .............................................................................................................. 26 3.1.1 Pin Map ......................................................................................................................... 27 3.1.2 Pin Definition ................................................................................................................. 28 3.2 Power Supply ............................................................................................................. 32 3.2.1 Power Supply ................................................................................................................ 33 3.2.2 Logic level ..................................................................................................................... 34 3.2.3 Power Consumption ...................................................................................................... 35 3.3 Control Signal ............................................................................................................. 38 3.3.1 Module Start-Up ............................................................................................................ 38 3.3.1.1 Start-up Circuit ........................................................................................................................... 38 3.3.1.2 Start-up Timing Sequence ......................................................................................................... 39 3.3.2 Module Shutdown ......................................................................................................... 39 3.3.3 Module Reset ................................................................................................................ 40 3.3.4 PCIe Link State ............................................................................................................. 43 3.3.4.1 D0 L1.2 ...................................................................................................................................... 43 3.3.4.2 D3cold L2 .................................................................................................................................. 43 3.3.5 Timing Application ......................................................................................................... 44 3.4 PCIe & USB ................................................................................................................ 45 Re…

Text truncated - open the document above for the full version.

Rev. 1/1/03 Fibocom Wireless Inc. 5/F,Tower A,Technology Building II,1057 Nanhai Avenue, ShenZhen , China Tel: +8675526733555 ; Fax: +86‐755‐26520841 Date: August 26, 2020 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ZMOFM150NA Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Block Diagram Parts List Operation Description Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ Lucy Liu

Fibocom Wireless Inc. 5/F,Tower A,Technology Building II,1057 Nanhai Avenue, ShenZhen , China Tel: +8675526733555 ; Fax: +86‐755‐26520841 Date: August 26, 2020 Power of Attorney To whom it may concern, Please be notified that I, Lucy Liu, have designated Jim Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jim Tsai in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C 862. This authorization is limited to the product of as following: FCC ID: ZMOFM150NA If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, ____ Contact Person: Lucy Liu E-mail: [email protected]

1/1 Fibocom Wireless Inc. 5/F,Tower A,Technology Building II, 1057 Nanhai Avenue, ShenZhen , China Tel: +8675526733555 ; Fax: +86‐755‐26520841 Date: August 26, 2020 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : ZMOFM150NA To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test set-up photos  Users Manual The application contains technical information, which Hangzhou Tuya Information Technology Co.,Ltd deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, ____ Contact Person: Lucy Liu E-mail: [email protected]

Applicant/Grantee Fibocom Wireless Inc. /ZMO FCC ID: ZMOFM150NA Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio portion of this module is shielded, please see exhibition external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The module has buffer modulation/data inputs. Y 3 The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. Please see the schem.pdf Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the Test Report exhibition. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Please refer to the Setup Photo exhibition for the stand-alone test configuration. Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The Module will be labeled with its own FCC ID, and the instruction on the labeling rule of the end product has been stated in the User Manual of this module. Please refer to the Label and User Manual exhibition. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the User Manual. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Y _________________________________ Contact Person: Lucy Liu E-mail: [email protected]

Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 1 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA 1. External Photograph of EUT Module Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 2 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 3 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 4 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA List of Accessory： Specification of Accessory Test Jig Brand Name N/A Model Name N/A WWAN Antenna 1 Brand Name N/A Model Name GHT-019A WWAN Antenna 2 Brand Name N/A Model Name AN0750-64S01BSM Remark: For accessories equipped with this EUT, please refer to the following photos. 2. Photograph of Accessory Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 5 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA WWAN Antenna 1 Module Test Jig Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 6 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA WWAN Antenna 2 Module Test Jig Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 7 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA WWAN Antenna 1 <Tx/ Rx> Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 8 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 9 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA WWAN Antenna 2 <Tx/ Rx> Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 10 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA

Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 11 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA 3. Internal Photograph of EUT Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 12 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 13 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 14 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA Photographs of EUT Report No.: EP051416 Brand Name: Fibocom / Model Name: FM150-NA Sporton International (KunShan) Inc. Page Number : 15 of 15 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID: ZMOFM150NA

Sporton International (Kunshan) Inc. Page Number : 1 of 13 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : ZMOFM150NA RF Exposure Evaluation Report Report No. : FA051416 RF Exposure Evaluation Report APPLICANT : Fibocom Wireless Inc. EQUIPMENT : 5G Module BRAND NAME : Fibocom MODEL NAME : FM150-NA FCC ID : ZMOFM150NA STANDARD : 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 We, Sporton International (Kunshan) Inc., would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International (Kunshan) Inc., the test report shall not be reproduced except in full. Reviewed by: Rose Wang / Supervisor Approved by: Kat Yin / Manager Sporton International (Kunshan) Inc. No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International (Kunshan) Inc. Page Number : 2 of 13 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : ZMOFM150NA RF Exposure Evaluation Report Report No. : FA051416 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT TUNE UP POWER AMONG PRODUCTION UNITS ....................... 7 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 9 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................. 10 5.1. Standalone Power Density Calculation ........................................................................................... 10 5.2. Collocated Power Density Calculation ............................................................................................. 11 Sporton International (Kunshan) Inc. Page Number : 3 of 13 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : ZMOFM150NA RF Exposure Evaluation Report Report No. : FA051416 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA051416 Rev. 01 Initial issue of report. Sep. 11, 2020 Sporton International (Kunshan) Inc. Page Number : 4 of 13 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : ZMOFM150NA RF Exposure Evaluation Report Report No. : FA051416 1. Administration Data 1.1. Testing Laboratory Sporton International (Kunshan) Inc. is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.02. Testing Laboratory Test Firm Sporton International (Kunshan) Inc. Test Site Location No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China TEL : +86-512-57900158 FAX : +86-512-57900958 Test Site No. FCC Designation No. FCC Test Firm Registration No. CN1257 314309 Applicant Company Name Fibocom Wireless Inc. Address 5/F,Tower A,Technology Building II,1057 Nanhai Avenue,Shenzhen,China Manufacturer Company Name Fibocom Wireless Inc. Address 5/F,Tower A,Technology Building II,1057 Nanhai Avenue,Shenzhen,China Sporton International (Kunshan) Inc. Page Number : 5 of 13 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : ZMOFM150NA RF Exposure Evaluation Report Report No. : FA051416 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type 5G Module Brand Name Fibocom Model Name FM150-NA FCC ID ZMOFM150NA Wireless Technology and Frequency Range WCDMA Band II: 1852.4 MHz ~ 1907.6 MHz WCDMA Band IV: 1712.4 MHz ~ 1752.6 MHz WCDMA Band V: 826.4 MHz ~ 846.6 MHz LTE Band 2: 1850.7 MHz ~ 1909.3 MHz LTE Band 4: 1710.7 MHz ~ 1754.3 MHz LTE Band 5: 824.7 MHz ~ 848.3 MHz LTE Band 7: 2502.5 MHz ~ 2567.5MHz LTE Band 12: 699.7 MHz ~ 715.3 MHz LTE Band 13: 779.5 MHz ~ 784.5 MHz LTE Band 14: 790.5 MHz ~ 795.5 MHz LTE Band 17: 706.5 MHz ~ 713.5 MHz LTE Band 25: 1850.7 MHz ~ 1914.3 MHz LTE Band 26: 814.7 MHz ~ 848.3 MHz LTE Band 30: 2307.5 MHz ~ 2312.5 MHz LTE Band 41: 2498.5 MHz ~ 2687.5 MHz LTE Band 42: 3552.5 MHz ~ 3597.5 MHz LTE Band 43: 3652.5 MHz ~ 3672.5 MHz LTE Band 48: 3552.5 MHz ~ 3697.5 MHz LTE Band 66: 1710.7 MHz ~ 1779.3 MHz LTE Band 71: 665.5 MHz ~695.5 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5 : 824 MHz ~ 849 MHz 5G NR n7 : 2500 MHz ~ 2570 MHz 5G NR n12 : 699 MHz ~ 716 MHz 5G NR n25 : 1850 MHz ~1915 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz 5G NR n66 : 1710 MHz – 1780 MHz 5G NR n71 : 663 MHz – 698 MHz Mode RMC 12.2Kbps HSDPA HSUPA DC-HSDPA HSPA+ (16QAM uplink is not supported) LTE: QPSK, 16QAM, 64QAM DFT-s-OFDM (QPSK / 16QAM / 64QAM / 256QAM) CP-OFDM (QPSK / 16QAM / 64QAM / 256QAM) HW Version V1.0.1 SW Version 89601.1000.00.02.11.20 EUT Stage Identical Prototype Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2. This device supports HPUE for LTE band 41 and 5G NR n41 with class 2 power level, so HPUE has been performed standalone power density calculation. 3. For DFT-s-OFDM and CP-OFDM output power measurement reduction, according to maximum power reduction for the CP-OFDM mode will not higher than DFT-s-OFDM mode, therefore, CP-OFDM measurement is unnecessary. We always chose higher power (DFT-s-OFDM mode) to perform MPE analysis. 4. 5GNR supports NSA and SA mode. 5. The device implanted DPS (Dynamic Power Share) function to achieve higher uplink dat…

Text truncated - open the document above for the full version.

Sporton International (Kunshan) Inc. Page Number : 1 of 20 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : ZMOFM150NA Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC051416 FCC Test Report APPLICANT : Fibocom Wireless Inc. EQUIPMENT : 5G Module BRAND NAME : Fibocom MODEL NAME : FM150-NA FCC ID : ZMOFM150NA STANDARD : 47 CFR Part 15 Subpart B CLASSIFICATION : Certification The product was received on May 14, 2020 and testing was completed on Jul. 20, 2020. We, Sporton International (Kunshan) Inc., would like to declare that the tested sample has been evaluated in accordance with the test procedures given in ANSI C63.4-2014 and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Kunshan) Inc., the test report shall not be reproduced except in full. Reviewed by: Jason Jia / Supervisor Approved by: James Huang / Manager Sporton International (Kunshan) Inc. No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International (Kunshan) Inc. Page Number : 2 of 20 TEL : +86-512-57900158 Report Issued Date : Sep. 11, 2020 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : ZMOFM150NA Report Template No.: BU5-FC15B Version 3.0 FCC Test Report Report No. : FC051416 TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1. GENERAL DESCRIPTION .......................................................................................................................... 5 1.1. Applicant ............................................................................................................................................ 5 1.2. Manufacturer ..................................................................................................................................... 5 1.3. Product Feature of Equipment Under Test ....................................................................................... 5 1.4. Product Specification of Equipment Under Test ............................................................................... 6 1.5. Modification of EUT ........................................................................................................................... 7 1.6. Test Location ..................................................................................................................................... 7 1.7. Test Software .................................................................................................................................... 8 1.8. Applicable Standards ........................................................................................................................ 8 2. TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 9 2.1. Test Mode ......................................................................................................................................... 9 2.2. Connection Diagram of Test System .............................................................................................. 10 2.3. Support Unit used in test configuration and system ........................................................................ 10 2.4. EUT Operation Test Setup .............................................................................................................. 10 3. TEST RESULT ........................................................................................................................................... 11 3.1. Test of AC Conducted Emission Measurement .............................................................................. 11 3.2. Test of Radiated Emission Measurement ....................................................................................... 15 4. LIST OF MEASURING EQUIPMENT ........................................................................................................ 19 5. UNCERTAINTY OF EVALUATION ........................................................................................................... 20 APPENDIX A. SETUP PHOTOGRAPHS Sporton International (Kunshan) Inc. Page Number : 3 of 20 TEL : +86-512-57900158 Report Issued D…

Text truncated - open the document above for the full version.