ZMOFM350GL16LTE Module

Applicable Model Copyright FM350-GL-16 Hardware Guide PCIoT Draft V1.0.3 Disclaimer This document serves as a guide for the use of products. Customers must design their products according to the information provided in the document. The Company shall not be liable for any damage caused by failure to comply with relevant operation or design specifications or safety rules. Due to product version upgrade or other reasons, the Company reserves the right to modify any information in this document at any time without prior notice and any responsibility. Unless otherwise agreed, all statements, information and suggestions in this document do not constitute any express or implied guarantee. Copyright Notice Copyright © 2023 Fibocom Wireless Inc. All rights reserved. Unless specially authorized by the Company, the recipient of the documents shall keep the documents and information received confidential, and shall not use them for any purpose other than the implementation and development of this project. Without the written permission of the Company, no unit or individual shall extract or copy part or all of the contents of this document without authorization, or transmit them in any form. The Company has the right to investigate legal liabilities for any offense and tort in connection with violation of confidentiality obligations, or unauthorized use or malicious use of the said documents and information in other illegal forms. Trademark Statement The trademark is registered and owned by Fibocom Wireless Inc. Other trademarks, product names, service names and company names appearing in this document are owned by their respective owners. Contact Information Website: https://www.fibocom.com Address: 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan,Shenzhen, China. Tel: 0755-26733555 Safety Instructions Do not operate wireless communication products in areas where the use of radio is not recommended without proper equipment certification. These areas include environments that may generate radio interference, such as flammable and explosive environments, medical devices, aircraft or any other equipment that may be subject to any form of radio interference. The driver or operator of any vehicle shall not operate wireless communication products while controlling the vehicle. Doing so will reduce the driver's or operator's control and operation of the vehicle, resulting in safety risks. Wireless communication devices do not guarantee effective connection under any circumstances, such as when the (U) SIM card is invalid or the device is in arrears. In an emergency, please use the emergency call function when the device is turned on, and ensure that the device is located in an area with sufficient signal strength. Contents Copyright © Fibocom Wireless Inc. 1 Contents Applicable Model ............................................................................................................... 4 Change History .................................................................................................................. 5 1 Foreword .......................................................................................................................... 6 1.1 Introduction ................................................................................................................................. 6 1.2 Reference Standards ................................................................................................................. 6 1.3 Related Documents ................................................................................................................... 7 2 Overview .......................................................................................................................... 8 2.1 Introduction ................................................................................................................................. 8 2.2 Specification ............................................................................................................................... 8 2.2.1 RF Characteristics ................................................................................................................ 8 2.2.2 Key Features ......................................................................................................................... 9 Antenna Configuration ............................................................................................................... 11 3 Application Interface ................................................................................................... 13 3.1 M.2 Interface ............................................................................................................................. 13 3.1.1 Pin Map ................................................................................................................................ 13 3.1.2 Pin Definition ...................................................................................................................... 14 3.2 Electrical Specification ........................................................................................................... 21 3.2.1 Power supply ...................................................................................................................... 21 3.2.2 Logic Level ......................................................................................................................... 22 3.2.3 Power Consumption ....................................................................................................... 22 3.3 Control Signal .......................................................................................................................... 27 3.3.1 Module Start-Up .............................................................................................................. 28 3.3.1.1 Start-up Circuit ......................................................…

Text truncated - open the document above for the full version.

Fibocom Wireless Inc. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: August 23, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Fibocom Wireless Inc. certifies that the equipment FCC ID: ZMOFM350GL16 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Fibocom Wireless Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List ( as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ____ ____________________ Name: Patrick Ma E-mail: [email protected]

Fibocom Wireless Inc. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: August 23, 2023 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Fibocom Wireless Inc. certifies that the equipment FCC ID: ZMOFM350GL16 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Fibocom Wireless Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List ( as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ____ ____________________ Name: Patrick Ma E-mail: [email protected]

Fibocom Wireless Inc. 1101, Tow er A, Building 6, Shenzhen International, Innovation Valle y, Dashi 1st Rd, Nanshan, ShenZhen, China Tel: +8675526733555 ; Fax: +86-755-26520841 Federal Communications Commission 7435 Oaklan d Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, [Fibocom Wireless Inc. Grantee Code ZMO, FRN:0020891057] (“the applicant”) certifies that, as of the date of the filing of application, [Fibocom Wireless USA] (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information of agent are: U.S. Agent: Fibocom Wireless USA FCC Registration Number (FRN): 0033437914 Physical U.S. address: 5909 Peachtree Dunwoody Rd Ste 910 Atlant a, GA 30328 United States Contact: Lei Yao Phone: +01 (469)463-6983 Email: [email protected] The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent Name: Patrick Ma Email: [email protected] Date: April 21, 2023 Name: Lei Yao Email: [email protected] Date: April 21, 2023

Applicant/Grantee Fibocom Wireless Inc. /ZMO FCC ID: ZMOFM350GL16 Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The radio portion of this module is shielded, please see exhibition external photos. Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The module has buffer modulation/data inputs. Y 3 The modular transmitter must have its own power supply regulation. The module has its own power supply regulation. Please see the schem.pdf Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. The requirements of antenna connector and spurious emission have been fulfilled. Please refer to the Test Report exhibition. Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Please refer to the Setup Photo exhibition for the stand-alone test configuration. Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The Module will be labeled with its own FCC ID, and the instruction on the labeling rule of the end product has been stated in the User Manual of this module. Please refer to the Label and User Manual exhibition. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The required FCC rule has been fulfilled and all the instructions for maintaining compliance have been clearly stated in the User Manual. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. Y _________________________________ Contact Person: Patrick Ma E-mail: [email protected]

Rev. 1/1/03 Fibocom Wireless Inc. Date: August 23, 2023 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ZMOFM350GL16 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: ◆ Parts List ◆ Schematic Diagram ◆ Block Diagram ◆ Operational Description ◆ Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _____ ___________________ Contact Person: Patrick Ma E-mail: [email protected]

Fibocom Wireless Inc. Date: August 23, 2023 Power of Attorney To whom it may concern, Please be notified that I, Patrick Ma, have designated Jim Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jim Tsai in Sporton International Inc., on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C 862. This authorization is limited to the product of as following: FCC ID: ZMOFM350GL16 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, ____ Contact Person: Patrick Ma E-mail: [email protected]

1/1 Fibocom Wireless Inc. Date: August 23, 2023 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : ZMOFM350GL16 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: ⚫ Test set-up photos ⚫ External Photos ⚫ Internal Photos ⚫ User Manual The application contains technical information, which Fibocom Wireless Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, ____ Contact Person: Patrick Ma E-mail: [email protected]

Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 1 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 720510 1. External Photograph of EUT Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 2 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 3 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 4 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 5 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 6 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 7 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 2. Photograph of Accessory 720510 WWAN Antenna (Monopole/PIFA) GNSS Antenna Test Module Test Jig Note: Multiple antennas support different bands, and the device needs to switch antenna according to different frequency bands. Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 8 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (Monopole Ant.1) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 9 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (Monopole Ant.2) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 10 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (Monopole Ant.3) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 11 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (Monopole Ant.4) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 12 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (PIFA Ant.1) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 13 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (PIFA Ant.2) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 14 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (PIFA Ant.3) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 15 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (PIFA Ant.4) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 16 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 WWAN Antenna (PIFA Ant.5) Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 17 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 GNSS Antenna

Label Label Location On the top of the EUT

Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 18 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 720510 3. Internal Photograph of EUT Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 19 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 20 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 21 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 22 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01 Photographs of EUT Report No.: EP051802-26 Brand Name: Fibocom; Model Name: FM350-GL-16 Sporton International Inc.(Shenzhen) Page Number : 23 of 23 TEL : 86-755-8637-9589 Report Issued Date : Sep. 13, 2023 FAX :86-755-8637-9595 Report Version : Rev. 01

Sporton International Inc. (Shenzhen) Page Number : 1 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Aug. 29, 2023 FCC ID : ZMOFM350GL16 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA051802-26 RF Exposure Evaluation Report APPLICANT : Fibocom Wireless Inc. EQUIPMENT : LTE Module BRAND NAME : Fibocom MODEL NAME : FM350-GL-16 FCC ID : ZMOFM350GL16 STANDARD : 47 CFR Part 2.1091 The product evaluation date was started from Aug. 14, 2023 and completed on Aug. 14, 2023. We, Sporton International Inc. (Shenzhen), would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International Inc. (Shenzhen), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Shenzhen) 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International Inc. (Shenzhen) Page Number : 2 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Aug. 29, 2023 FCC ID : ZMOFM350GL16 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA051802-26 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT TUNE UP POWER AMONG PRODUCTION UNITS ....................... 6 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 5.1. Standalone Power Density Calculation ............................................................................................. 8 Sporton International Inc. (Shenzhen) Page Number : 3 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Aug. 29, 2023 FCC ID : ZMOFM350GL16 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA051802-26 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA051802-26 Rev. 01 Initial issue of report. Aug. 29, 2023 Sporton International Inc. (Shenzhen) Page Number : 4 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Aug. 29, 2023 FCC ID : ZMOFM350GL16 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA051802-26 1. Administration Data 1.1. Testing Laboratory Sporton International Inc. (Shenzhen) is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Testing Laboratory Test Firm Sporton International Inc. (Shenzhen) Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 Test Site No. Sporton Site No. FCC Designation No. FCC Test Firm Registration No. SAR01-SZ CN1256 421272 Applicant Company Name Fibocom Wireless Inc. Address 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan,Shenzhen, China. Manufacturer Company Name Fibocom Wireless Inc. Address 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan,Shenzhen, China. Sporton International Inc. (Shenzhen) Page Number : 5 of 8 TEL : 86-755-86379589 / FAX : 86-755-86379595 Report Issued Date : Aug. 29, 2023 FCC ID : ZMOFM350GL16 Report Version : Rev. 01 RF Exposure Evaluation Report Report No. : FA051802-26 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type LTE Module Brand Name Fibocom Model Name FM350-GL-16 FCC ID ZMOFM350GL16 Wireless Technology and Frequency Range WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2 : 1850 MHz ~ 1910 MHz LTE Band 4 : 1710 MHz ~ 1755 MHz LTE Band 5 : 824 MHz ~ 849 MHz LTE Band 7 : 2500 MHz ~ 2570 MHz LTE Band 12 : 699 MHz ~ 716 MHz LTE Band 13 : 777 MHz ~ 787 MHz LTE Band 14 : 788 MHz ~ 798 MHz LTE Band 17 : 704 MHz ~ 716 MHz LTE Band 25 : 1850 MHz ~ 1915 MHz LTE Band 26 : 814 MHz ~ 849 MHz LTE Band 30 : 2305 MHz ~ 2315 MHz LTE Band 38 : 2570 MHz ~ 2620 MHz LTE Band 41 : 2496 MHz ~ 2690 MHz LTE Band 48 : 3550 MHz ~ 3700 MHz LTE Band 66 : 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz Mode RMC 12.2Kbps HSDPA HSUPA DC-HSDPA HSPA+ (16QAM uplink) LTE: QPSK, 16QAM, 64QAM, 256QAM HW Version V1.0.0 SW Version 11600.0000.00.29.22.01 EUT Stage Identical Prototype Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2. The intra-band ULCA combination could be referred to the product spec. 3. This device supports intra-band ULCA, due to intra-band ULCA and non-CA power is same, so non-CA MPE analysis can represent ULCA MPE analysis. Comments and Explanations: 1. The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. 2. The maximum RF output tune up power, antenna gain also the safe distance used for evaluate RF exposure were declared by manufacturer. Sporton International Inc. (Shenzhen) Page…

Text truncated - open the document above for the full version.