Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 27 | 27 | 709 MHz - 711 MHz | 153.00 mW | 9M05W7D | 0.0028
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesModular Transmitter. Output Power listed is conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or mobile transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. The max. antenna gain for this device as reported to the FCC is: 3dBi (LTE FDD), 3dBi (WCDMA) and 3dBi (GSM/GPRS/EDGE). This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for LTE Bands 2 and 4; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for LTE Bands 5; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 7; and LTE of 5 and 10 MHz bandwidth modes for LTE Band 13 and 17.