ZMOSC128NALTE Module

SC128 Hardware Guide V1.3 Disclaimer Customers must design and develop their products referring to the information provided in the document. The Company shall not be liable for any damage caused by failure to comply with relevant operation or specifications or rules. Due to product version upgrade or other reasons, the Company reserves the right to modify any information in this document at any time without prior notice and any responsibility. Unless otherwise agreed, all statements, information and suggestions in this document do not constitute any express or implied guarantee. Copyright Notice Copyright © 2022 Fibocom Wireless Inc. All rights reserved. Unless specially authorized by the Company, the recipient of the documents shall keep the documents and information received confidential and shall not use them for any purpose other than the implementation and development of this project. Without the written permission of the Company, no unit or individual shall extract or copy part or all of the contents of this document without authorization or transmit them in any form. The Company has the right to investigate legal liabilities for any offense and tort in connection with violation of confidentiality obligations, or unauthorized use or malicious use of the said documents and information in other illegal forms. Trademark Statement The trademark is registered and owned by Fibocom Wireless Inc. Other trademarks, product names, service names and company names appearing in this document are owned by their respective owners. Contact Information Website: https://www.fibocom.com Address: 10/F-14/F, Block A, Building 6, Shenzhen International Innovation Valley, Dashi First Road, Xili Community, Xili Subdistrict, Nanshan District, Shenzhen Tel: 0755-26733555 Safety Instructions Do not operate wireless communication products in areas where the use of radio is not recommended without proper equipment certification. These areas include environments that may generate radio interference, such as flammable and explosive environments, medical devices, aircraft or any other equipment that may be subject to any form of radio interference. The driver or operator of any vehicle shall not operate wireless communication products while controlling the vehicle. Doing so will reduce the driver's or operator's control and operation of the vehicle, resulting in safety risks. Wireless communication devices do not guarantee effective connection under any circumstances, such as when the (U) SIM card is invalid or the device is in arrears. In an emergency, please use the emergency call function when the device is turned on and ensure that the device is located in an area with sufficient signal strength. Contents Copyright © Fibocom Wireless Inc. 1 Contents Applicable Models ..................................................................................................... 4 Change History .......................................................................................................... 5 1 Foreword ................................................................................................................ 6 1.1 Description .................................................................................................................... 6 1.2 Reference Standards ..................................................................................................... 8 2 Product Overview ................................................................................................. 10 2.1 General Description .................................................................................................... 10 2.2 Main Performance ...................................................................................................... 11 2.3 Function Block Diagram .............................................................................................. 14 2.4 Pin Definition............................................................................................................... 16 2.4.1 Pin Distribution ..................................................................................................... 16 2.4.2 Pin Description ...................................................................................................... 17 3 Application Interfaces ........................................................................................... 31 3.1 Power Supply .............................................................................................................. 31 3.1.1 Power Input ........................................................................................................... 31 3.1.2 VRTC ...................................................................................................................... 33 3.1.3 VPH_PWR .............................................................................................................. 34 3.1.4 Power Output ........................................................................................................ 34 3.2 Control Signal .............................................................................................................. 35 3.2.1 Power On/Off ........................................................................................................ 35 3.2.1.1 Power-on ......................................................................................................... 35 3.2.1.2 Power-off and Reset ....................................................................................... 37 3.2.1.3 Sleep/Wakeup ................................................................................................. 38 3.2.1.4 Volume Control ............................................................................................... 38 3.3 USB Interface (TYPE-C) ................................................................................................ 38 3.4 UART .............................................…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Fibocom Wireless Inc. 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-15-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: ZMOSC128NA [Fibocom Wireless Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Lucy Liu Rev 1/26/2023 Fibocom Wireless Inc. 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-15-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: ZMOSC128NA [Fibocom Wireless Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Lucy Liu

FEDERAL COMMUNICATIONS COMMISSION Supplier’s Declaration of Conformity (SDoC) Equipment: LTE Module Trademark(s) and Model(s): FIBOCOM / SC128-NA Manufacturer: Fibocom Wireless Inc. FCC ID in case other parts of this equipment are subject to certification: ZMOSC128NA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration: Test report number: SEWM2212000326RG06 Issue date: 2023-02-08 The following manufacturer/importer/entity (located in the USA) is responsible for this declaration: Date: 2023/03/15.. City:  Shenzhen .. Name:  Lucy Liu .. Email: [email protected]....... Signature: . FCC

Fibocom 1101, T o Shenzhe Date: 202 Federal C Authoriza 7435 Oa Columbi a FCC ID: US Fibocom accept s e Fibocom no less t h importatio related ad FCC US the desi g Wireless The serv Designa t Company FRN: 003 Address: Contact P Phone: 7 Email: Su Sincerely Compan y Company Signature Wireless In ower A, Build en, China 23/3/14 Communicat ation and Ev kland Mills R a, MD 21046 ZMOSC128 S Agen Wireless In ervice of pro Wireless In han one yea on of the app dministrative Agent, LLC, gnated agent Inc. for FCC ice term is c ted Agent In y Name: FCC 33402884 3722 Illinoi s Person: Tim 708-571-3148 upport@FCC y, y:Fibocom W y Represent e: c. ding 6, Shen tions Comm valuation Div Road 6 8NA t – Atte c.certifies, th cess on our c.accepts t o r after either plicable equi e or judicial p accepts as t for the purp C ID:ZMOSC overing prod nformation: C US Agent, s Avenue, Sa Payne 8 CUSAgent.co Wireless Inc. ative: Lucy L nzhen Interna mission vision station hat as of 202 behalf for FC o maintain an r the grantee ipment within proceeding in of the date o pose of acce C128NA duct lifetime f : , LLC aint Charles, om Liu ational Innov Statem 23/3/14, we h CC ID: ZMO n agent of se e has perman n the U.S., o nvolving the of the filing o pting service for one FCC , IL, 60174, U Design Design Signat vation Valley ment / Pa have designa OSC128NA. ervice of proc nently termin or the conclu equipment, of this applica e of process C ID. USA nated Agent: nated Agent ture: y, Dashi 1st art 2.91 ated FCC US cess in the U nated all mar sion of any C whichever is ation, the ob on behalf o f : FCC US Ag Representa Rd, Nansh a 1(d)(7) S Agent, LLC United States rketing and Commission s later. ligation of b e f Fibocom gent, LLC tive: Tim Pa y an, C to s for - eing yne

Rev 11/20/07 Fibocom Wireless Inc. 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ZMOSC128NA Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (1. Block Diagram.pdf; 2.SCH.pdf; 3. Operational description.pdf; 4.BOM.pdf;) (Block Diagram, SCH, Operational description, BOM) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 45 days after the grant as outlined in Public Notice DA 04-1705. Exhibit Type File Name (External Photos, Internal Photos, Setup Photos, Manual) (Appendix A.4-External Photos.pdf; Appendix A.5-Internal Photos.pdf; Appendix A.2 – DSS_DTS_NII Setup Photos; Appendix A.3 – PCB Setup Photos; Manual;) Sincerely, Name: Lucy Liu Title: Certification Manager

RF_160, Issue 04 Fibocom Wireless Inc. Declaration of Authorization We Name: Fibocom Wireless Inc. Address: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China City: Shenzhen Country: China Declare that: Name Representative of agent: Well Wei Agent Company name: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd Address: South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description: LTE Module Type designation: SC128-NA Trademark: FIBOCOM on our behalf. Date: 2023/03/15.. City:  Shenzhen .. Name:  Lucy Liu .. (2) Email: ...[email protected]....... Signature:  Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

RF_734_02 04 April 16 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: ZMOSC128NA Items to be covered by Single modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, please see exhibition external photos 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes, the modular has buffer modulation /data inputs 3. The modular transmitter must have its own power supply regulation. Yes, please see the SCH.pdf 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes, the requirements of antenna connector and spurious emission have been fulfilled. Please refer to the test report exhibition. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes, please refer to the setup photo exhibition for the stand-alone configuration 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes, the module will be label with its own FCC ID, and the instruction on the labelling rule of the end product has been stated in the user manual of this module. Please refer to the label and user manual exhibition. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes, the required FCC rule has been fulfilled and all the instruction for maintaining compliance have been clearly stated in the user manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes, please refer exhibition RF exposure for the compliance of MPE RF exposure rule. Note: A limited modular approval (LMA) may be granted for single modular transmitters that comply partially with the requirements above. RF_734_02 04 April 16 Name and surname of applicant (or authorized representative): Signature: Date: 2023/03/15.. City:  Shenzhen .. Name:  Lucy Liu .. Email: ...[email protected]....... Signature: 

Page 1 of 1 1 Photographs - EUT Constructional Details Model No.: SC128-NA FCC ID: ZMOSC128NA IC: 21374-SC128NA

SC128-NA Label & Label Location ⚫ EUT Dimensions(mm)：41*41 ⚫ Label ⚫ Label Location (On the top of the EUT)

1 Photographs - EUT Constructional Details Model No.: SC128-NA FCC ID: ZMOSC128NA IC: 21374-SC128NA

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG07 Rev.: 01 Page: 1 of 8 Authorized Signature: Panta Sun Wireless Laboratory Manager TEST REPORT Application No.: SEWM2212000326RG Applicant: Fibocom Wireless Inc. Address of Applicant: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China EUT Description: LTE Module Model No.: SC128-NA Trade Mark: FIBOCOM FCC ID: ZMOSC128NA Standards: 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 Date of Receipt: 2023/01/03 Date of Issue: 2023/02/08 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG07 Rev.: 01 Page: 2 of 8 1 Version Revision Record Version Chapter Date Modifier Remark 01 2023/02/08 Original Prepared By (Nick Hu) / Test Engineer Checked By (Well Wei) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG07 Rev.: 01 Page: 3 of 8 Contents 1 Version ......................................................................................................................... 2 2 General Information ...................................................................................................... 4 2.1 Client Information .................................................................................................. 4 2.2 Test Facility ........................................................................................................... 4 2.3 General Description of EUT ................................................................................... 5 3 RF Exposure Evaluation ............................................................................................... 6 3.1 RF Exposure Compliance Requirement ................................................................ 6 3.1.1 Limits ................................................................................................................. 6 3.1.2 Test Procedure .................................................................................................. 7 3.1.3 EUT RF Exposure Evaluation ............................................................................ 7 3.1.4 Exposure calculations for multiple sources ........................................................ 8 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG07 Rev.: 01 Page: 4 of 8 2 General Information 2.1 Client Information Applicant: Fibocom Wireless Inc. Address of Applicant: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China 2.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6336.01) SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6336.01. • Innovation, Science and Economic Development Canada SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0120. IC#: 27594. • FCC –Designation Number: CN1312 SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. has been recognized as an accredited testing laboratory. Designation Number: CN1312. Test Firm Registration Number: 717327 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG07 Rev.: 01 Page: 5 of 8 2.3 General Description of EUT EUT Description: LTE Module Model No.: SC128-NA Trade Mark: FIBOCOM Hardware Version: V1.0 Software Version: SC128-NA-S64.00.102 Antenna Type: External Antenna Antenna Gain: LTE Band 2: 4dBi LTE Band 4: 3dBi LTE Band 5: 3dBi LTE Band 7: 4dBi LTE Band 12: 3dBi LTE Band 13: 3dBi LTE Band 17: 3dBi LTE Band 25: 4dBi LTE Band 26: 3dBi LTE Band 41: 4dBi LTE Band 66: 3dBi LTE Band 71: 3dBi BT/BLE: 1.83dBi 2.4G WIFI: 1.83dBi 5150MHz to 5250MHz: 4.29dBi 5250MHz to 5350MHz: 4.43dBi 5470MHz to 5725MHz: 3.68dBi 5725MHz to 5850MHz: 1.47dBi Note: The antenna gain are derived from the gain information report provided by the manufacturer. Remark: As above information is provided and confirmed by the applicant. SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG07 Rev.: 01 Page: 6 of 8 3 RF Exposure Evaluation 3.1 RF Exposure Compliance Requirement 3.1.1 Limits Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2 ) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know …

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG03 Rev.: 01 Page: 1 of 59 Authorized Signature: Panta Sun Wireless Laboratory Manager TEST REPORT Application No.: SEWM2212000326RG Applicant: Fibocom Wireless Inc. Address of Applicant: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China EUT Description: LTE Module Model No.: SC128-NA Trade Mark: FIBOCOM FCC ID: ZMOSC128NA Standards: FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C Date of Receipt: 2023/01/03 Date of Test: 2023/01/09 to 2023/02/08 Date of Issue: 2023/02/08 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG03 Rev.: 01 Page: 2 of 59 1 Version Revision Record Version Chapter Date Modifier Remark 01 2023/02/08 Original Prepared By (Tizzy Song) / Test Engineer Checked By (Well Wei) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG03 Rev.: 01 Page: 3 of 59 2 Test Summary Test Item FCC Rule No. Test Method Test Result Result Antenna Requirement 15.203/15.247(b) -- Clause 4.1 PASS AC Power Line Conducted Emission 15.207 ANSI C63.10 2013 Section 6.2 Clause 4.2 PASS Conducted Output Power 15.247 (b)(3) ANSI C63.10 2013 Section11.9.2.3 Clause 4.4 PASS DTS (6 dB) Bandwidth & 99% Occupied Bandwidth 15.247 (a)(2) ANSI C63.10 2013 Section 11.8 Option 2 / 6.9.3 Clause 4.5 PASS Power Spectral Density 15.247 (e) ANSI C63.10 2013 Section 11.10.2 Clause 4.6 PASS Band-edge for RF Conducted Emissions 15.247(d) ANSI C63.10 2013 Section 11.11 Clause 4.7 PASS RF Conducted Spurious Emissions 15.247(d) ANSI C63.10 2013 Section 11.11 Clause 4.8 PASS Radiated Spurious Emissions 15.205/15.209 ANSI C63.10 2013 Section 11.12 Clause 4.9 PASS Restricted bands around fundamental frequency (Radiated Emission) 15.205/15.209 ANSI C63.10 2013 Section 11.12 Clause 4.10 PASS ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG03 Rev.: 01 Page: 4 of 59 Contents 1 Version .......................................................................................................................... 2 2 Test Summary ............................................................................................................... 3 3 General Information ....................................................................................................... 5 3.1 Details of Client ................................................................................................. 5 3.2 Test Location .................................................................................................... 5 3.3 Test Facility ....................................................................................................... 5 3.4 General Description of EUT .............................................................................. 6 3.5 Test Environment .............................................................................................. 8 3.6 Description of Support Units ............................................................................. 8 4 Test results and Measurement Data .............................................................................. 9 4.1 Antenna Requirement ....................................................................................... 9 4.2 AC Power Line Conducted Emissions............................................................. 10 4.3 Duty Cycle ....................................................................................................... 14 4.4 Conducted Output Power ................................................................................ 15 4.5 DTS (6 dB) Bandwidth & 99% Occupied Bandwidth ....................................... 16 4.6 Power Spectral Density ................................................................................... 17 4.7 Band-edge for RF Conducted Emissions ........................................................ 18 4.8 RF Conducted Spurious Emissions................................................................. 19 4.9 Radiated Spurious Emissions ......................................................................... 20 4.10 Restricted bands around fundamental frequency ............................................ 23 5 Measurement Uncertainty (95% confidence levels, k=2) ............................................. 25 6 Equipment List ............................................................................................................. 26 7 Photographs - Setup Photos........................................................................................ 28 ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG03 Rev.: 01 Page: 5 of 59 3 General Information 3.1 Details of Client Applicant: Fibocom Wireless Inc. Address of Applicant: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China 3.2 Test Location Company: SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Address: South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone Post code: 215000 Test engineer: Ives Cheng, Tizzy Song 3.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6336.01) SGS-CSTC STANDARDS TECHNICAL SERVICES (SUZHOU) CO., LTD. is accredited by the American Association for Laboratory Accred…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG04 Rev.: 01 Page: 1 of 120 Authorized Signature: Panta Sun Wireless Laboratory Manager TEST REPORT Application No.: SEWM2212000326RG Applicant: Fibocom Wireless Inc. Address of Applicant: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc. Address of Manufacturer: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China EUT Description: LTE Module Model No.: SC128-NA Trade Mark: FIBOCOM FCC ID: ZMOSC128NA Standards: FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C Date of Receipt: 2023/01/03 Date of Test: 2023/01/09 to 2023/03/14 Date of Issue: 2023/03/14 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG04 Rev.: 01 Page: 2 of 120 1 Version Revision Record Version Chapter Date Modifier Remark 01 2023/03/14 Original Prepared By (Tizzy Song) / Test Engineer Checked By (Well Wei) / Reviewer ` SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Report No.: SEWM2212000326RG04 Rev.: 01 Page: 3 of 120 2 Test Summary Test Item FCC Rule No. …

Text truncated - open the document above for the full version.