ZMOSC208WWIFI Module

Fibocom Wireless Inc. To: Federal Communications Commission Date: 2026-01-14 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Fibocom Wireless Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Fibocom Wireless Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: WIFI Module FCC ID: ZMOSC208W If you have any questions, please feel free to contact me Contact Person: Patrick Ma Position in the Company: Certification Director Date of Signature: 2026-01-14 ___________________________ Signatory (signature of the applicant)

Fibocom Wireless Inc. 1101,Tower A, Building 6, Shenzhen International, Innovation Valley, Dashi 1st Rd, Nanshan, ShenZhen, China Te l : +8675526733555 ; Fax: +86-755-26520841 F ederal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) T o whom it may concern, [F ibocom Wireless Inc. Grantee Code ZMO] (“the applicant”) certifies that, as of the date of the filing of application, [Fibocom Wireless USA] (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The information of agent are: U.S. Agent: Fibocom Wireless USA FCC Registration Number (FRN): 0033437914 Physical U.S. address: 5909 Peachtree Dunwoody Rd Ste 910 Atlanta, GA 30328 United Statess Contact: Amy DeBuysere Phone: +01 865-888-0420 Email: [email protected] T he applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. T he agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sig ned by the Applicant Signed by the Agent Name: Patrick Ma Name: Amy DeBuysere Email: [email protected] Email: [email protected] Date: May 28, 2025 Date: May 28, 2025

Fibocom Wireless Inc. Date: 2026-01-14 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Fibocom Wireless Inc., the undersigned, hereby authorizes Miss. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Fibocom Wireless Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID: ZMOSC208W including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Fibocom Wireless Inc. in connection with the Application shall have the same effect as acts of the Fibocom Wireless Inc.. Fibocom Wireless Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name:Patrick Ma Title:Certification Director Tel:+8675526733555 Email: [email protected] Company name: Fibocom Wireless Inc.

Fibocom Wireless Inc. Date:2026-01-14 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: ZMOSC208W To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Fibocom Wireless Inc. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Fibocom Wireless Inc. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 BOM SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory: Name:Patrick Ma Company name:Fibocom Wireless Inc. Address:1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Tel: +8675526733555 Email: [email protected]

Fibocom Wireless Inc. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: ZMOSC208W (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2472 MHz Yes, No Yes, No Yes, No Yes, No 2422 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 5745 – 5825 MHz Yes, No Yes, No Yes, No Yes, No 5755 – 5795 MHz Yes, No Yes, No Yes, No Yes, No 5180 – 5240 MHz Yes, No Yes, No Yes, No Yes, No 5190 – 5230 MHz Yes, No Yes, No Yes, No Yes, No 5260 – 5320 MHz Yes, No Yes, No Yes, No Yes, No 5270 – 5310 MHz Yes, No Yes, No Yes, No Yes, No 5500 – 5700 MHz Yes, No Yes, No Yes, No Yes, No 5510 – 5670 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory: Name:Patrick Ma Company name:Fibocom Wireless Inc.

FibocomWirelessInc. version01 ModularApprovalRequestLetter Date:2026-01-14 FCCID:ZMOSC208W TypeofEquipment:WIFIModule ThefollowingrequirementsaccordingtoFCCPart15.212aremet: iRFshielding Theradioportionhashisownshielding(seeexternalphotos). iiBufferedmodulation/datainputs hasbeenintegratedinthechipset iiiPowersupplyregulation isintegrated ivAntennarequirementssection15.203,15.204band15.204c Themodulecomeswithonepermanentlyattachedantennas.Thespuriousemission requirementsarefulfilled(seeattachedtestreport). vStandalonetestconfiguration Pleasereferringtotestsetupconfigurationphoto viLabelling Themodulehasitsownlabel.Theinstructionforlabellingrulesforthehostdevicehasbeen statedintheusersmanual viiComplianceonspecificruleoroperatingrequirements TherequiredFCCruleshasbeenfulfilledandallinstructionsformaintainingcompliancehas beenclearlystatedintheusersmanual viiiRFExposure RFexposurerequirementsarefulfilledformobileconfiguration.Theinstallationofthemoduleis restrictedtomobilehostdeviceswhatisclearlystatedintheinstallationinstructionoftheuser manual. ForportableapplicationsOEMintegratorsneedSARevaluationandanownFCCID. Name:PatrickMa Title:CertificationDirector Company:FibocomWirelessInc.

SC208-W Label & Label Location Label Label Location (On the top of the EUT)

NOTE: This document is issued byShenzhenMorlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 9 REPORT No.：SZ25110347S01 RF EXPOSURE EVALUATION REPORT APPLICANT : Fibocom Wireless Inc PRODUCT NAME : WIFI Module MODEL NAME :SC208-W BRAND NAME : FIBOCOM FCC ID :ZMOSC208W STANDARD(S) : 47 CFR Part 2(2.1091) RECEIPT DATE : 2025-11-27 TEST DATE :2025-12-02 to 2025-12-31 ISSUE DATE : 2026-01-20 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25110347S01 Page2of 9 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1 Applicant and Manufacturer Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2 Equipment under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.3 Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2. Device Category and RF Exposure Limit ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 3. Maximum Average Power Summary ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 4. RF Exposure Assessment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 Annex A Testing Laboratory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 Change History Version Date Reason for change 1.0 2026-01-20 First edition MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25110347S01 Page3of 9 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Fibocom Wireless Inc Applicant Address: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China Manufacturer: Fibocom Wireless Inc Manufacturer Address: 1101, Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan, Shenzhen, China 1.2 Equipment under Test (EUT) Description Product Name: WIFI Module Sample No.: 1#, 3#, 4# Hardware Version: V1.2 Software Version: SC208-W-U16.00.011 Frequency Bands: WLAN 2.4GHz 2412MHz-2462MHz WLAN 5GHz 5180MHz-5240MHz; 5260MHz-5320MHz; 5500MHz-5720MHz; 5745MHz-5825MHz Bluetooth 2402MHz-2480MHz Modulation Mode: WLAN 2.4GHz DSSS, OFDM WLAN 5GHz OFDM, OFDM Bluetooth GFSK, π/4-DQPSK, 8-DPSK Antenna Information: WLAN 2.4GHz / Bluetooth Antenna Type: Dipole Antenna Antenna Gain: 1.83dBi WLAN 5GHz Antenna Type: Dipole Antenna Antenna Gain: 5180MHz-5240MHz 4.29dBi 5260MHz-5320MHz 4.43dBi 5500MHz-5720MHz 3.68dBi 5745MHz-5825MHz 1.47dBi Note 1: The EUT description presented in the report are provided by applicant and/or manufacturer, and the test laboratory is not responsible for the accuracy of the information. For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25110347S01 Page4of 9 manufacturer. 1.3 Applied Reference Documents Leading reference documents for testing: Identity Document Title Remark 47 CFR Part 2(2.1091) Radio Frequency Radiation Exposure Assessment: mobile devices / KDB 447498 D01v06 General RF Exposure Guidance / Note 1: Any additions, deviation, or exclusions from the method shall be noted in the “Remark”. MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ25110347S01 Page5of 9 2. Device Category and RF Exposure Limit Per user manual, based on 47 CFR 2.1091, this device belongs to mobile device category with General Population/Uncontrolled exposure. Mobile Devices: 47 CFR 2.1091(b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. General Population/Un…

Text truncated - open the document above for the full version.

Use range： Applicable to Shenzhen Fibocom Wireless Co., Ltd. 5G antenna solution. Electrical Specifications： Electrical Specifications 700-1000MHz;1400- 6000MHz MaterialABS input resistance50Ω Plastic material Rubber cap:ABS Standing wave ratio≤3.0Adapter 1: ABS Polarization modeLinear polarization Adapter 2:ABS Operating temperature - 40 ̊C ~ + 65 ̊C RF cable specifications RG-178 Storage temperature- 40 ̊C ~ + 80 ̊CConnector specifications SMA Male J Connector torque test200 ~ 1000 g.cmJoint tension testSMA≥3 Kg Gain 700-1000MHz:1.17dBi Connector torque test200 ~ 1000 g.cm 1400-1690MHz:3.21dBi 1700-2000MHz:3.10dBi 2010-2480MHz:3.36dBi 2490-2750/3350- 3570MHz:2.56dBi 3580-3850MHz:2.99dBi 5000-5490MHz:4.49dBi 5500-6000MHz:3.32dBi Test conditions and methods: Test conditions and instruments Test MethodsTest Results Microwave anechoic chamber far-field test system Aglient E5071B network analyzer 1. Assemble the antenna to be tested on the prototype and make a passive test fixture 2. Put the passive fixture on the test fixture in the dark room and establish a connection with the network analyzer 3. Use test software to test antenna passive data See test data Test data： －－－－－－－－－－－－－－· FreQUODC7 Direct i •i A•s Bfficienc (MB•) 雹，（dBil ,un(dBil ，｛‘｝ 5000 6. 12 -1. 81 65. Si 5010 6. 15 -1. 83 65. 59 5020 6. 13 -1. 80 66. 05 5030 6. 12 -1. 89 64. 65 5040 6. 14 -2. 09 61. 78 5050 6. 09 -2. 09 61. 74 5060 6. 09 -2. 09 61. 74 5070 6. 02 -2 04 62. 56 5080 6. 11 -2. Oi 62.13 50，。 6. 12 -2. 07 62. 07 5100 6. 13 -2. 04 62. 55 5110 6. 17 -2. 00 63. 11 5120 6. 17 -2 08 61. 96 5130 6. 21 -2. 08 61. 90 5140 6. 26 -2 l4 61. 05 5150 6. 32 -2. 26 59. 39 5160 6. 31 -2 13 61. 26 5170 6. 34 ’2 20 60. 31 5180 6. 29 -2. 20 60. 32 5190 6. 39 -2. 20 60. 28 5200 6. 41 -2. 23 59. i1 5210 6. 40 －的＇：、6唾, 59. 6i 5220 6. 40 ’2 12 61. 40 a,s-036(5000- 5230 6. 42 -2. 20 60. 32 5490) 30du 524。 6. 45 -2. 22 59. 91 5250 6. 49 ’2. 28 59. 18 5260 6. 47 -2. 33 58. 45 5270 6. 45 -2 37 67，’由 5280 6. 52 -2. 31 58. i3 5290 6. 60 -2. 34 58. 33 5300 6. 66 -2. 36 58. 13 5310 6. 68 -2. 37 Si. 89 5320 6. 68 -2 3t 58. 70 5330 6. 69 -2. 26 59. 4i 5340 6. ii -2. 28 59.10 5350 6. 70 -2. 29 58. 97 5360 6. 73 -2. 26 59. 37 5370 6. 74 -2. 25 59. 59 5380 6. ii -2 3t 58. i9 53，。 6. 78 -2 35 58. 26 5400 6. 79 -2. 45 56. Si 5410 6. i9 -2. 50 56. 20 5420 6. i4-2. 58 55. 2i 军430 6. 70 -2 6i 54. 81 5440 6. iO ’2 73 53. 32 5450 6. 61 -2. 72 53. 49 5460 6. 57 -2. 60 52. 53 5470 6. 51 -2. 83 52. 14 5480 6. 49 -2. 83 52. 08 5490 6. 36 -2 88 51.‘’ －－－－－－－－－－－－－－ －－－－－－－－ Peak ,un(dBil 4. 31 4. 32 4. 32 4. 23 4. 05 3. 99 4. 00 3. 98 4. 04 4. 05 4. 09 4. 17 4. 09 4. 13 4. 12 4. 06 4. 18 4. 15 4. 09 4. 19 4. li 4. 15 4. 29 4. 22 4. 22 4. 21 4. 14 4. OS 4. 21 4. 25 4. 30 4. 31 4. 36 4. 43 4. 43 4. 40 4. 46 4. 49 4. 47 4. 44 4. 34 4. 29 4. li 4. 09 3. 9i 3. 89 3. 77 3. 68 3. 66 3. 47 a,s-036(5500- 6000) 30du 1'requenc7 Directi•i (MB•) 雹，（dBil 5500 6. 30 5510 6. 24 5520 6. Ii 5530 6. Oi 5540 5. 97 5550 5. 83 5560 5. 75 5570 5. 61 5580 5. 56 5590 5. 42 5600 5. 26 5620 4. 85 5630 4. 65 5640 4. 55 5650 4. 48 5660 4. 33 5670 4. 25 5680 3. 9i 5690 3. 90 5700 3. 90 5710 4. 11 5720 4. 10 5730 4. 02 5740 4. 03 5750 4. 03 5760 4.14 5770 4. 02 5780 4. 01 57，。 4. 05 5800 4. ll 5810 4. 09 5820 4. 12 5830 4. 17 5840 4. 05 5850 4. 18 5860 4. 22 5870 4. 2i 5880 4. 1 i 589。4. Oi 5，。。 4. 03 5’10 3. 9i 5920 3. 92 5930 3. 92 594。3. 84 5950 3. 71 5960 3. 80 5970 3. 83 5980 3. 81 5990 3. i7 6000 3. 80 －－－－－－－－ a句’gBfficienc Peak ,un(dBil ，｛‘｝ ,un(dBil -2.♀S 50. 41 3. 32 -3. Oi 49. 35 3. 17 -3 15 48. 37 3. 02 -3 18 48.14 2. 89 -3. 19 48. 00 2. 78 -3. 18 48. 05 2. 65 -3. tS 48. 05 2. 56 -3 25 4i. 30 2. 36 -3. 26 4i. 21 2. 30 -3. 30 ‘6. 82 2. 12 -3. 32 46. 61 I. 94 -3. 19 47. 96 I. 66 -3 19 ‘,7, 94 1. 45 -3. 20 4i. 84 I. 34 -l. 27 47.15 l. 21 -3. 21 ‘i. i2 l.12 -3 10 48. 94 I. 15 -2 98 60. 33 0. 99 -2. 93 50. 99 。98 -2. 89 51. 42 l. 01 -2. 94 50. 81 I. 1 i -2. 9i 50. 42 I. 13 -3 00 50. 08 l 01 -2. 89 51. 42 I. 14 -2. 86 51. i4 l. 17 -2. 83 62. 08 I. 31 -2. 84 52. 04 l. 19 -2 88 61. 64 l 13 -2. 92 51. 07 I. 14 -2. 92 51. 01 I. 19 -2. 93 50. 94 1.16 -2. 90 51. 2i !. 22 -2. 90 51. 32 1. 28 -2. 83 52. 12 I. 22 -2 71 53. 63 l. 4i -2. iB 52. 69 l. 44 -2. 80 52. 43 1. 46 -2. 83 52. 15 1. 34 -2. 76 52. 93 1. 30 -2 . iO 53. 67 l. 33 -2. 65 54. 27 1. 31 -2 ii 53. 521. 21 -2. 85 51. 93 1. 08 -2. 91 51. 14 0. 92 -2 95 50. 66 0. 76 -2. 90 51. 24 0. 90 -2 81 52. 36 1. 02 -2. iS 52. 76 1. 04 -2 81 52. 31 0. 96 -2. 83 52. Oi 0. 96 Direction map: 2D3D E1E2H700MHZ880MHZ960MHZ E1E2H 1710MHZ1990MHZ E1E2H 2170MHZ E1E2H 2690MHZ3350MHZ E1E2H 3800MHZ E1E2H 5370MHZ E1E2H 6000MHZ Direction map: 700 750 800 850 1570 2170 2400 2500 3000 3500 4000 4500 5000 5500 6000 Sample Pictures: Antenna packaging instructions 1. Outer packaging: carton packaging Front view:side view: 2. Inner packaging (1PCS/PE ziplock bag, 50PCS/bag, the size of the bag depends on the product size)

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 104 REPORT No.：SZ25110347W02 TEST REPORT APPLICANT : Fibocom Wireless Inc PRODUCT NAME : WIFI Module MODEL NAME : SC208-W BRAND NAME : FIBOCOM FCC ID : ZMOSC208W STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2025-11-27 TEST DATE : 2025-12-02 to 2025-12-31 ISSUE DATE : 2026-01-20 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 104 REPORT No.：SZ25110347W02 DIRECTORY 1. Summary of Test Result ·············································································· 4 1.1. Testing Applied Standards ········································································ 5 1.2. Test Equipment List ················································································· 6 1.3. Measurement Uncertainty ········································································· 8 1.4. Testing Laboratory ··················································································· 8 2. General Description ··················································································· 9 2.1. Information of Applicant and Manufacturer ················································· 9 2.2. Information of EUT ··················································································· 9 2.3. Channel List of EUT ··············································································· 10 2.4. Test Configuration of EUT ······································································· 11 2.5. Test Conditions ····················································································· 11 2.6. Test Setup Layout Diagram ····································································· 11 3. Test Results ···························································································· 14 3.1. Antenna Requirement ············································································ 14 3.2. Hopping Mechanism ·············································································· 15 3.3. Number of Hopping Frequency ································································ 16 3.4. Duty Cycle of Test Signal ········································································ 17 3.5. Maximum Peak Conducted Output Power ················································· 18 3.6. Maximum Average Conducted Output Power ············································ 19 3.7. 20 dB Bandwidth ··················································································· 20 3.8. Carried Frequency Separation ································································· 21 3.9. Time of Occupancy (Dwell time) ······························································ 22 3.10. Conducted Spurious Emissions and Band Edge ········································ 23 3.11. Conducted Emission ·············································································· 24 3.12. Restricted Frequency Bands ··································································· 25 3.13. Radiated Emission ················································································· 26 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 104 REPORT No.：SZ25110347W02 Annex A Test Data and Result ······································································· 28 Change History Version Date Reason for change 1.0 2026-01-20 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 104 REPORT No.：SZ25110347W02 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Remark 1 15.203 Antenna Requirement N/A N/A PASS / 2 15.247(a) 15.247(h) Hopping Mechanism N/A N/A PASS / 3 15.247(a) Number of Hopping Frequency Dec. 10, 2025 Zhu Peihong PASS / 4 ANSI C63.10 Duty Cycle Dec. 10, 2025 Zhu Peihong PASS / 5 15.247(b) Maximum Peak Conducted Output Power Dec. 10, 2025 Zhu Peihong PASS / 6 15.247(b) Maximum Average Conducted Output Power Dec. 10, 2025 Zhu Peihong PASS / 7 15.247(a) 20dB Bandwidth Dec. 10, 2025 Zhu Peihong PASS / 8 15.247(a) Carrier Frequency Separation Dec. 10, 2025 Zhu Peihong PASS / 9 15.247(a) Time of Occupancy (Dwell time) Dec. 10, 2025 Zhu Peihong PASS / 10 15.247(d) Conducted Spurious Emission and Band Edge Dec. 10, 2025 Zhu Peihong PASS / 11 15.207 Conducted Emission Dec. 03, 2025 Wang Yapeng PASS / 12 15.247(d) Restricted Frequency Bands Dec. 04, 2025Tian Xin PASS / 13 15.209, 15.247(d) Radiated Emission Dec. 04, 2025Tian Xin PASS / Note 1: The tests were performed according to the method of measurements prescribed in ANSI C63.10-2020, KDB 558074 D01 v05r02 and…

Text truncated - open the document above for the full version.