ZMV-MULTIREADERMultiReader

September 26, 2011 (DE-September 26, 2011) Mounting Instructions Multi-Identification S22.1e 2 Table of content3 Table of content 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .5 1.1 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 5 1.2 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 5 1.3 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 5 1.4 Contact details of the manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 5 2 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .7 2.1 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 7 2.1.1 Necessary qualifications of the owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 7 2.1.2 Necessary qualifications of the service technician . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 7 2.2 Intended use of the multi-identification unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 7 2.3 Indication of hazards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 7 2.4 Safety signs on the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 8 2.5 Obligations of the owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 9 2.6 Obligations of the operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 9 2.7 Structural alterations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 10 3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .11 3.1 Multi-identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 11 3.2 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 12 3.2.1 Mounting bracket (with front plate mounting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 12 3.3 FCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 13 3.4 IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 13 4 Putting the unit into service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .15 4.1 Notes on installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 15 4.2 Squelch values and identification ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 15 4.3 Installing the multi-identification unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 16 4.3.1 On front plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 17 4.3.2 On the left or right in the Flex100 partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 19 4.4 Connecting the multi-identification unit to the main board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 20 5 Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .21 5.1 Checking the feeding boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 21 6 Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .23 6.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 23 7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .25 7.1 Maintenance intervals and activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 25 7.1.1 Daily . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 25 7.2 Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 25 4 Introduction5 1Introduction These mounting instructions put you in the position to operate the multi-identification unit safely as intended. > Please read the mounting instructions carefully before putting the multi-identification unit into service. > Keep the mounting instructions ready and available at all times and pass it on to the next user. > Observe all warnings and safety instructions in these mount- ing instructions at all times. 1.1Copyright The copyright for these mounting instructions is reserved by Förster-Technik. 1.2Disposal All components, liquids and solids must be disposed of in com- pliance with the official local regulations for waste prevention and appropriate waste recyc…

Text truncated - open the document above for the full version.

Nemko Oy  P.O.Box 19, FI-02601 Espoo, Finland Street address: Perkkaantie 11, FI-02600 Espoo Telephone +358 (0)424 5454 1  Telefax +358 (0)9 5489 6371 TEST REPORT Date: ESPOO 16.07.2012 Page: 1 (17) Appendices  Date of handing in: 20.03.2012 Number: 169001 No. 1 / 1 Tested by: Timo Hietala, Test Engineer Reviewed by: Janne Nyman, Compliance Specialist SORT OF EQUIPMENT: RF ID reader MARKETING NAME: TYPE: Multi-FDX/HDX MANUFACTURER: Förster-Technik GmbH CLIENT: Förster-Technik GmbH , Germany ADDRESS: Gerwigstrasse 25, Engen, D-78234, Germany TELEPHONE: +49 8161 80 0 / Claus Kuch TEST LABORATORY: Nemko Oy FCC REG. NO. 359859 October 20, 2011 IC FILE NO. 2040F-1 December 1, 2010 SUMMARY: In regard to the performed tests the equipment under test fulfils the requirements defined in the test specifications, see page 2 for details The test results are valid for the tested unit only. Without a written permission of Nemko Oy it is allowed to copy this report as a whole, but not partially. Version f1.00 Type: Multi-FDX/HDX Test report: 169001 Page 2 (17) Date 16.07.2012 Summary of performed tests and test results Section in CFR 47 Result 15.209 Peak output power PASS 15.209 Spurious radiated emissions PASS 15.207 AC power line conducted emissions PASS Section in RSS Gen Result 7.2.5 Peak output power PASS 7.2.5 Spurious radiated emissions PASS 7.2.4 AC power line conducted emissions PASS Explanations: PASS The EUT passed that particular test. FAIL The EUT failed that particular test. X The measurement was done, but there is no applicable performance criteria. Type: Multi-FDX/HDX Test report: 169001 Page 3 (17) Date 16.07.2012 Contents Summary of performed tests and test results .......................................................................................... 2 1. EUT and Accessory Information ......................................................................................................... 4 1.1 EUT description ........................................................................................................................ 4 1.2 EUT and accessories ................................................................................................................ 4 2. Test setups .......................................................................................................................................... 5 3. Standards and measurement methods ............................................................................................... 6 4. Test results .......................................................................................................................................... 6 4.1 Fundamental output power ....................................................................................................... 6 4.1.1 EUT operation mode ................................................................................................................. 6 4.1.2 Test method and limit ............................................................................................................... 6 4.1.3 Test results ............................................................................................................................... 7 4.2 Spurious radiated emission ...................................................................................................... 9 4.2.1 EUT operation mode ................................................................................................................. 9 4.2.2 Test method and limit ............................................................................................................... 9 4.2.3 Test results ............................................................................................................................. 10 4.2.4 Conducted disturbance at mains ports emission test ............................................................. 12 4.2.5 Test results ............................................................................................................................. 13 5. List of test equipment ........................................................................................................................ 15 6. Photographs ...................................................................................................................................... 16 Type: Multi-FDX/HDX Test report: 169001 Page 4 (17) Date 16.07.2012 1. EUT and Accessory Information 1.1 EUT description The EUT is an RF ID reader for animal detection. Alignment range: 120-133.9 kHz Channels: 3 Operating Voltage: 12-24 VDC Antenna: loop antenna 1.2 EUT and accessories Equipment under test (EUT):  RF ID reader , type Multi-FDX/HDX , S/N: - Peripherials: Main unit Control unit RFID tags: 120kHz, 130kHz and 133.9kHz Cables: From To Type Length [m] Mains supply network Main unit Mains cable, unshielded 1.2 Main unit EUT Signal/DC cable, shielded 3 Main unit Control unit Signal cable, shielded 2 Operating voltage of the EUT during the tests:  Main unit: 230 V AC, 50 Hz/240V AC 60Hz  RF ID reader: 12V DC Type: Multi-FDX/HDX Test report: 169001 Page 5 (17) Date 16.07.2012 2. Test setups Setup 1 (Radiated measurements) The test was performed inside a semi anechoic shielded room. For the duration of the test the EUT was placed on a non-conductive support 0.8 m high standing on the turntable. The tower and turn table were remotely controlled to turn the EUT and change the antenna polarization and height. The measured signal was routed from the measuring antenna to the spectrum analyzer. 3 METERS E.U.T. NON-CONDUCTING TURN-TABLE 0.8 METER VARIABLE SEARCH HEIGHT (1 TO 4 m) TO TEST RECEIVER/SPECTRUM ANALY ZER SEARCH ANTENNA Type: Multi-FDX/HDX Test report: 169001 Page 6 (17) Date 16.07.2012 3. Standards and measurement methods The test were performed in guidance of the CFR 47 Part 15, SUBPART B, Paragraph 15.209 (2010), ANSI C63.4 (2003), CISPR 22, RSS-210 Issue 8 and RSS-Gen Issue 3. 4. Test …

Text truncated - open the document above for the full version.

Nemko Oy  P.O.Box 19, FI-02601 Espoo, Finland Street address: Perkkaantie 11, FI-02600 Espoo Telephone +358 (0)424 5454 1  Telefax +358 (0)9 5489 6371 TEST REPORT Date: ESPOO 31.10.2012 Page: 1 (18) Appendices  Date of handing in: 25.10.2012 Number: 172279 No. 1 / 1 Tested by: Timo Hietala, Test Engineer Reviewed by: Janne Nyman, Compliance Specialist SORT OF EQUIPMENT: RF ID reader MARKETING NAME: FÖRSTER TECHNIK TYPE: Multi-FDX/HDX MANUFACTURER: Förster-Technik GmbH CLIENT: Förster Technik GmbH , Germany ADDRESS: Gerwigstrasse 25, Engen, D-78234, Germany TELEPHONE: +49 7733 9406 23 / Norbert Seeburger TEST LABORATORY: Nemko Oy FCC REG. NO. 359859 October 20, 2011 IC FILE NO. 2040F-1 December 1, 2010 SUMMARY: In regard to the performed tests the equipment under test fulfils the requirements defined in the test specifications, see page 2 for details The test results are valid for the tested unit only. Without a written permission of Nemko Oy it is allowed to copy this report as a whole, but not partially. Version f1.00 Type: Multi-FDX/HDX Test report: 172279 Page 2 (18) Date 31.10.2012 Summary of performed tests and test results Section in CFR 47 Result 15.209 Peak output power PASS 15.209 Spurious radiated emissions PASS 15.207 AC power line conducted emissions PASS Section in RSS Gen Issue 3 Result 7.2.5 Peak output power PASS 7.2.5 Spurious radiated emissions PASS 7.2.4 AC power line conducted emissions PASS Explanations: PASS The EUT passed that particular test. FAIL The EUT failed that particular test. X The measurement was done, but there is no applicable performance criteria. Type: Multi-FDX/HDX Test report: 172279 Page 3 (18) Date 31.10.2012 Contents Summary of performed tests and test results .......................................................................................... 2 1. EUT and Accessory Information ......................................................................................................... 4 1.1 EUT description ........................................................................................................................ 4 1.2 EUT and accessories ................................................................................................................ 4 2. Test setups .......................................................................................................................................... 5 3. Standards and measurement methods ............................................................................................... 6 4. Test results .......................................................................................................................................... 6 4.1 Fundamental output power ....................................................................................................... 6 4.1.1 EUT operation mode ................................................................................................................. 6 4.1.2 Test method and limit ............................................................................................................... 6 4.1.3 Test results ............................................................................................................................... 7 4.2 Spurious radiated emission .................................................................................................... 10 4.2.1 EUT operation mode ............................................................................................................... 10 4.2.2 Test method and limit ............................................................................................................. 10 4.2.3 Test results ............................................................................................................................. 11 4.2.4 Conducted disturbance at mains ports emission test ............................................................. 13 4.2.5 Test results ............................................................................................................................. 14 5. List of test equipment ........................................................................................................................ 16 6. Photographs ...................................................................................................................................... 17 Type: Multi-FDX/HDX Test report: 172279 Page 4 (18) Date 31.10.2012 1. EUT and Accessory Information 1.1 EUT description The EUT is an RF ID reader for animal detection. Alignment range: 120-133.9 kHz Channels: 3 Operating Voltage: 12-24 VDC Antenna: loop antenna 1.2 EUT and accessories Equipment under test (EUT):  RF ID reader , type: Multi-FDX/HDX , S/N: - Peripherals: Main unit Control unit RFID tags: 120kHz, 130kHz and 133.9kHz Cables: From To Type Length [m] Mains supply network Main unit Mains cable, unshielded 1.2 Main unit EUT Signal/DC cable, shielded 3 Main unit Control unit Signal cable, shielded 2 Operating voltage of the EUT during the tests:  Main unit: 230 V AC, 50 Hz / 240 V AC, 60 Hz  RF ID reader: 12V DC Type: Multi-FDX/HDX Test report: 172279 Page 5 (18) Date 31.10.2012 2. Test setups Setup 1 (Radiated measurements) The test was performed inside a semi anechoic shielded room. For the duration of the test the EUT was placed on a non-conductive support 0.8 m high standing on the turntable. The tower and turn table were remotely controlled to turn the EUT and change the antenna polarization and height. The measured signal was routed from the measuring antenna to the spectrum analyzer. 3 METERS E.U.T. NON-CONDUCTING TURN-TABLE 0.8 METER VARIABLE SEARCH HEIGHT (1 TO 4 m) TO TEST RECEIVER/SPECTRUM ANALY ZER SEARCH ANTENNA Type: Multi-FDX/HDX Test report: 172279 Page 6 (18) Date 31.10.2012 3. Standards and measurement methods The test were performed in guidance of the CFR 47 Part 15, SUBPART B, Paragraph 15.209 (2010), ANSI C63.4 (2003), CISPR 22, RSS-210 I…

Text truncated - open the document above for the full version.