ZNEAPP-EAWi-Fi Cord set, Wi-Fi Power Strip

Ningbo Fengsheng Electronics Co., LTD WIFI smart socket manual 1、 Product description WIFI smart socket is a socket that can connect to the Internet through WIFI wireless network and realize network control of electrical power supply. In any place where there is a network, users can achieve power on and off control and status display through the smart phone client, while the client also supports the control of multiple sockets. WIFI smart socket adopts the patent technology of Smart Config to access the network, which is easy to configure and supports multiple timing tasks at the same time. Enjoy the wireless enjoyment of WIFI smart socket by controlling water dispensers, electric kettles, fans, lights and rice cookers locally or remotely. 2、Instructions for use 1)、Enter the network configuration mode: after opening the socket power for 3 seconds, press the switch for another 6 seconds, and the indicator light will enter the fast flashing state, and then release the switch until the APP displays the successful configuration. 2)、When the socket is connected to the network through the customer service side of the phone, if the backlight with the key on is in a slow flash state, it means that the socket is connecting to the router, and the backlight is always on after successful connection. 3)、After the network access is successfully configured, the user can control through the mobile phone client. If the on-key backlight is blue, the socket is on; if the on-key backlight is red, the socket is off. 4)、The user can also control the on/off state of the socket by turning on the key. If the user presses the on/off key and the on/off key backlight is blue, the socket is in the on state; if the on/off key backlight is red, the socket is in the off state. 5)、After the socket is successfully connected to the network, there is no need to reconfigure the connection after power failure. The socket will actively join the wireless router. 6)、Please refer to the "Help" in the client software for the specific access method and configuration. 3、 Product parameters Model SY-AP2, SY-AP2C SY-AP3, SY-AP3C Current: Max. 13A Voltage: 125 V / 60 Hz Max power 1625W Frequency Band: 2400-2483.5MHz Static power loss: < 0.8W Working environment Temperature: 0~40°C Humidity: 10% to 95% Wireless standard: 802.11b /g/n 4、 Product features 1)、Support WIFI wireless network; 2)、Support smart Config network access patent technology, easy and convenient network access; 3)、Real-time state feedback is supported, and the working state of electrical appliances can be fed back to the client in real time; 4)、Support the setting of timing tasks; 5)、 The mobile phone client can control up to 100 smart sockets; 6)、 Simple installation, plug and play, simple and safe operation; 7)、 Support local or remote wireless control of electric appliances such as water dispensers, electric kettles, fans, lights and rice cookers. 5、Matters needing attention 1)、 Keep away from moisture and moisture, only in dry places (not used in bathrooms, etc.) 2)、 Please use it in a safe environment to ensure the safety of electricity. (Working power shall not exceed 1625W, current shall not exceed 13A) Note: All pictures in this manual are for reference only. The details are in kind. 6、The FCC warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC RF exposure requirements, a separation distance of 20cm or moreshould be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended

Ningbo Fengsheng Electronics Co., LTD WIFI smart socket manual 1、 Product description WIFI smart socket is a socket that can connect to the Internet through WIFI wireless network and realize network control of electrical power supply. In any place where there is a network, users can achieve power on and off control and status display through the smart phone client, while the client also supports the control of multiple sockets. WIFI smart socket adopts the patent technology of Smart Config to access the network, which is easy to configure and supports multiple timing tasks at the same time. Enjoy the wireless enjoyment of WIFI smart socket by controlling water dispensers, electric kettles, fans, lights and rice cookers locally or remotely. 2、Instructions for use 1)、Enter the network configuration mode: after opening the socket power for 3 seconds, press the switch for another 6 seconds, and the indicator light will enter the fast flashing state, and then release the switch until the APP displays the successful configuration. 2)、 When the socket is connected to the network through the customer service side of the phone, if the backlight with the key on is in a slow flash state, it means that the socket is connecting to the router, and the backlight is always on after successful connection. 3)、After the network access is successfully configured, the user can control through the mobile phone client. If the backlight is red at the on-off key, the socket is on; if there is no backlight at the on-off key, the socket is off. 4)、The user can also control the on/off state of the socket by turning the key on. If the user presses the on/off key and the back light of the on/off key is red, the socket is in the on state; if the back light of the on/off key, the socket is in the off state. 5)、 After the socket is successfully connected to the network, there is no need to reconfigure the connection after power failure. The socket will actively join the wireless router. 6)、Please refer to the "Help" in the client software for the specific access method and configuration. 3、 Product parameters Model SY-AP4, SY-AP4C Current: Max. 15A Voltage: 125 V / 60 Hz Max power 1875W Frequency Band: 2400-2483.5MHz Static power loss: < 0.8W Working environment Temperature: 0~40°C Humidity: 10% to 95% Wireless standard: 802.11b /g/n 4、 Product features 1)、Support WIFI wireless network; 2)、Support smart Config network access patent technology, easy and convenient network access; 3)、Real-time state feedback is supported, and the working state of electrical appliances can be fed back to the client in real time; 4)、Support the setting of timing tasks; 5)、 The mobile phone client can control up to 100 smart sockets; 6)、 Simple installation, plug and play, simple and safe operation; 7)、 Support local or remote wireless control of electric appliances such as water dispensers, electric kettles, fans, lights and rice cookers. 5、Matters needing attention 1)、 Keep away from moisture and moisture, only in dry places (not used in bathrooms, etc.) 2)、 Please use it in a safe environment to ensure the safety of electricity. (Working power shall not exceed 1875W, current shall not exceed 15A) Note: All pictures in this manual are for reference only. The details are in kind. 6、The FCC warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC RF exposure requirements, a separation distance of 20cm or moreshould be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended

Declaration Letter We Ningbo Fengsheng Electronics Co., LTD. hereby declare that the product Wi-Fi Cord set, Wi-Fi Power Strip: SY-AP2, SY-AP2C SY-AP3, SY-AP3C SY-AP4, SY-AP4C is not capable of operating with channel 12 and 13 in regions of US and Canada. Versions of the product available for import and sale in the US and Canada will not operate on channels 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. By: SongLiang Title: Manager On behalf: Ningbo Fengsheng Electronics Co., LTD. Date: 2020-10-16

Declaration of model difference we Ningbo Fengsheng Electronics Co., LTD. Here clarified that: Our product Wi-Fi Cord set, Wi-Fi Power Strip, the models are SY-AP2 and SY-AP2C, SY-AP3 and SY-AP3C SY-AP4 and SY-AP4C They have the same wireless module and circuit structure. The difference between SY-AP*series and SY-AP*C series is USB output type (“C” is type C) The difference in SY-AP* series is socket number, * is the number of sockets. SY-AP4 can be separate controlled respectively, each socket can be controlled with one key. On behalf: Ningbo Fengsheng Electronics Co., LTD. Date: 2020-10-16 Signature by:

External Photo SY-AP4(C) SY-AP3(C) SY-AP2(C)

Label SY-AP2 SY-AP2C unit: mm Location SY-AP3 SY-AP3C unit: mm Location SY-AP4 SY-AP4C unit: mm Location

Internal Photo SY-AP4(C) SY-AP3(C) SY-AP2(C) RF module Antenna location

NINGBO FENGSHENG ELECTRONICS CO., LTD. MPE ASSESSMENT REPORT Report Type: FCC MPE assessment report Model: SY-AP2, SY-AP2C, SY-AP3, SY-AP3C, SY-AP4, SY-AP4C REPORT NUMBER: 200601924SHA-002 ISSUE DATE: October 12, 2020 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-01_V1© 2018 Intertek Page 2 of 8 Report no.: 200601924SHA-002 Applicant: NINGBO FENGSHENG ELECTRONICS CO., LTD. No.87, Guangming North Road, Simen Town,Yuyao City, Zhejiang,China. Manufacturer: NINGBO FENGSHENG ELECTRONICS CO., LTD. No.87, Guangming North Road, Simen Town,Yuyao City, Zhejiang,China. Factory: NINGBO FENGSHENG ELECTRONICS CO., LTD. No.87, Guangming North Road, Simen Town,Yuyao City, Zhejiang,China. FCC ID: ZNEAPP-EA SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Daniel Zhao Report No.: 200601924SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 8 Revision History Report No. Version Description Issued Date 200601924SHA-002 Rev. 01 Initial issue of report October 12, 2020 Report No.: 200601924SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 8 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Wi-Fi Cord set, Wi-Fi Power Strip Type/Model: SY-AP2, SY-AP2C, SY-AP3, SY-AP3C, SY-AP4, SY-AP4C Description of EUT: EUT is a Wireless socket with WiFi function and there are six models. They have the same wireless module and circuit structure. The difference between SY-AP*series and SY-AP*C series is USB output type (“C” is type C). The difference in SY-AP* series is socket number, * is the number of sockets. SY-AP4 can be separate controlled respectively, each socket can be controlled with one key. After pre-scanning, we select the model SY-AP4 as representative and list the worst results in this report. Rating: SY-AP2, SY-AP2C, 125V 13A 1625W SY-AP3, SY-AP3C, 125V 15A 1625W SY-AP4, SY-AP4C, 125V 15A 1875W Category of EUT: Class B EUT type: Table top Floor standing Software Version: / Hardware Version: / Sample received date: July 20, 2020 Date of test: July 23, 2020~ July 29, 2020 1.2 Technical Specification Frequency Band: 2400MHz ~ 2483.5MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n(HT20) Type of Modulation: IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n(HT20): OFDM (64-QAM, 16-QAM, QPSK, BPSK) Operating Frequency: 2412MHz to 2462MHz for IEEE 802.11b/g/n(HT20) Channel Number: 11 Channels for 802.11b, 802.11g and 802.11n(HT20) Channel Separation: 5 MHz Antenna: PCB Antenna, gain is 1.7dBi, there is only one antenna. Report No.: 200601924SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 8 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN1175 IC Registration Lab Registration code No.: 2042B-1 VCCI Registration Lab Registration No.: R-4243, G-845, C-4723, T-2252 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 200601924SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 8 2 MPE Assessment Test result: Pass 2.1 MPE Assessment Limit Mobile device exposure for standalone operations: Frequency range E-field strength (V/m) H-field strength (A/m) B-field (uT) Equivalent plane wave power density S eq (W/m 2 ) 0-1 Hz - 3,2 × 10 4 4 × 10 4 - 1-8 Hz 10 000 3,2 × 10 4 /f 2 4 × 10 4 /f 2 - 8-25 Hz 10 000 4 000/f 5 000/f - 0,025-0,8 kHz 250/f 4/f 5/f - 0,8-3 kHz 250/f 5 6,25 - 3-150 kHz 87 5 6,25 - 0,15-1 MHz 87 0,73/f 0,92/f - 1-10 MHz 87/f 1/2 0,73/f 0,92/f - 10-400 MHz 28 0,073 0,092 2 400-2 000 MHz 1,375 f 1/2 0,0037 f 1/2 0,0046 f 1/2 f/200 2-300 GHz 61 0,16 0,20 10 Mobile device exposure for simultaneous transmission operations: the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 200601924SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 8 2.2 Assessment Results Power density (S) is calculated according to the formula: S = P / (4πR²) Where S = power density in mW/cm² P = Radiated transmit power in mW G = numeric gain of transmit antenna R = distance (cm) As we can see from the test report 200601924SHA-001: The maximum radiated power = 16.64dBm = 46.13mW; Here R is chosen to be 20cm, S = P / (4πR²) = 46.13/ (4 * 3.14 * 20 * 20) = 0.0092 mW/cm² < 1 mW/cm² Appendix I Report No.: 200601924SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 8 of 8 Definition below…

Text truncated - open the document above for the full version.

NINGBO FENGSHENG ELECTRONICS CO., LTD. RF TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report Model: SY-AP2, SY-AP2C, SY-AP3, SY-AP3C, SY-AP4, SY-AP4C REPORT NUMBER: 200601924SHA-001 ISSUE DATE: October 12, 2020 DOCUMENT CONTROL NUMBER: TTRF15.247-03_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-03_V1 © 2018 Intertek Page 2 of 58 Report no.: 200601924SHA-001 Applicant: NINGBO FENGSHENG ELECTRONICS CO., LTD. No.87, Guangming North Road, Simen Town,Yuyao City, Zhejiang,China. Manufacturer: NINGBO FENGSHENG ELECTRONICS CO., LTD. No.87, Guangming North Road, Simen Town,Yuyao City, Zhejiang,China. Factory: NINGBO FENGSHENG ELECTRONICS CO., LTD. No.87, Guangming North Road, Simen Town,Yuyao City, Zhejiang,China. FCC ID: ZNEAPP-EA SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2019): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-247 Issue 2 (February 2017): Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5 (March 2019) Amendment 1: General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Eric Li Reviewer Daniel Zhao Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 3 of 58 Content REVISION HISTORY................................................................................................................................................ 5 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6 1 GENERAL INFORMATION ............................................................................................................................. 7 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 7 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 7 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 8 2 TEST SPECIFICATIONS ................................................................................................................................... 9 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 9 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 9 2.3 TEST SOFTWARE LIST .......................................................................................................................................... 10 2.4 TEST PERIPHERALS LIST ....................................................................................................................................... 10 2.5 TEST ENVIRONMENT CONDITION: .......................................................................................................................... 10 2.6 INSTRUMENT LIST .............................................................................................................................................. 11 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 13 3 MINIMUM 6DB BANDWIDTH ..................................................................................................................... 14 3.1 LIMIT .............................................................................................................................................................. 14 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 14 3.3 TEST CONFIGURATION ........................................................................................................................................ 14 3.4 TEST RESULTS OF MINIMUM 6DB BANDWIDTH ....................................................................................................... 14 4 MAXIMUM CONDUCTED OUTPUT POWER AND E.I.R.P. ............................................................................. 15 4.1 LIMIT .............................................................................................................................................................. 15 4.2 MEASUREMENT PROCEDURE ............................................................................................................................... 15 4.3 TEST …

Text truncated - open the document above for the full version.

Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 51 of 58 9.2 Test Plots 802.11b,2412MHz,Ant0,Plot 1,Reference Level 802.11b,2412MHz,Ant0,Plot 2,Band Edge 802.11b,2412MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11b,2412MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11b,2412MHz,Ant0,Plot 5,5000MHz~2 5000MHz 802.11b,2437MHz,Ant0,Plot 1,Reference Level 802.11b,2437MHz,Ant0,Plot 2,Band Edge 802.11b,2437MHz,Ant0,Plot 3,30MHz~231 0MHz Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 52 of 58 802.11b,2437MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11b,2437MHz,Ant0,Plot 5,5000MHz~2 5000MHz 802.11b,2462MHz,Ant0,Plot 1,Reference Level 802.11b,2462MHz,Ant0,Plot 2,Band Edge 802.11b,2462MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11b,2462MHz,Ant0,Plot 4,2500MHz~5 000MHz Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 53 of 58 802.11b,2462MHz,Ant0,Plot 5,5000MHz~2 5000MHz 802.11g,2412MHz,Ant0,Plot 1,Reference Level 802.11g,2412MHz,Ant0,Plot 2,Band Edge 802.11g,2412MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11g,2412MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11g,2412MHz,Ant0,Plot 5,5000MHz~2 5000MHz Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 54 of 58 802.11g,2437MHz,Ant0,Plot 1,Reference Level 802.11g,2437MHz,Ant0,Plot 2,Band Edge 802.11g,2437MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11g,2437MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11g,2437MHz,Ant0,Plot 5,5000MHz~2 5000MHz 802.11g,2462MHz,Ant0,Plot 1,Reference Level Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 55 of 58 802.11g,2462MHz,Ant0,Plot 2,Band Edge 802.11g,2462MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11g,2462MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11g,2462MHz,Ant0,Plot 5,5000MHz~2 5000MHz 802.11n(HT20),2412MHz,Ant0,Plot 1,Reference Level 802.11n(HT20),2412MHz,Ant0,Plot 2,Band Edge Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 56 of 58 802.11n(HT20),2412MHz,Ant0,Plot 3,30MHz~2310MHz 802.11n(HT20),2412MHz,Ant0,Plot 4,2500MHz~5000MHz 802.11n(HT20),2412MHz,Ant0,Plot 5,5000MHz~25000MHz 802.11n(HT20),2437MHz,Ant0,Plot 1,Reference Level 802.11n(HT20),2437MHz,Ant0,Plot 2,Band Edge 802.11n(HT20),2437MHz,Ant0,Plot 3,30MHz~2310MHz Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 57 of 58 802.11n(HT20),2437MHz,Ant0,Plot 4,2500MHz~5000MHz 802.11n(HT20),2437MHz,Ant0,Plot 5,5000MHz~25000MHz 802.11n(HT20),2462MHz,Ant0,Plot 1,Reference Level 802.11n(HT20),2462MHz,Ant0,Plot 2,Band Edge 802.11n(HT20),2462MHz,Ant0,Plot 3,30MHz~2310MHz 802.11n(HT20),2462MHz,Ant0,Plot 4,2500MHz~5000MHz Report No.: 200601924SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 58 of 58 802.11n(HT20),2462MHz,Ant0,Plot 5,5000MHz~25000MHz **************************************** END ***************************************

Test Setup RF test