ZNPWIDEMACWireless Router

Page 1 of 10 150Mbps Wireless Router SL-R6801 Series User Guide l 1、Introduction The 150Mbps Wireless-N Broadband Router is dedicated to Small Office/Home Office (SOHO) Wireless network solution. It is 4 in 1 network device, which combines wireless access point, firewall, 4-port Switch and the NAT-Router. It provides up to 150Mbps data transmission rate in 2.4GHz frequency, complies with IEEE 802.11n, IEEE 802.11g and IEEE802.11b and backwards compatible with all IEEE 802.11n/g/b devices. And the router lso supports wireless LAN up to 128-bit WEP, WPA/WPA2 encryption security. The 150Mbps Wireless-N Broadband Router also provides WEB and Remote Management and system log so that network administrators can manage and monitor the network in real time. The 150Mbps Wireless-N Broadband Router also provides a hardware WPS (Wi-Fi protected setup) button, which helps you setup a secure wireless network in a snap. The button lets you activate the wireless protection easily 2、login To access the Router’s Web-based interface, launch a web browser such as Internet Explorer and enter the Router’s default IP address, http://192.168.0.1. Press “Enter”. Input the “admin” in both User Name and Password. Click “OK”. User:”admin” password:”admin” 3、 WAN Medium Type Page 2 of 10 4、Wireless Basic Settings Page 3 of 10 5、Wireless Security Setting Page 4 of 10 6、Wireless Distribution System(WDS) Page 5 of 10 7、DMZ Settings Page 6 of 10 一．Product features introduced Ø wireless AP, routers, 4 port switches, firewall function four-in-one bucket ; Ø Based on the latest IEEE802.11 n standards, compatibiliteIEEE802.11b IEEE802.11 g in back ward; Ø increases 6 times covered distance than the original 802.11 g standard , and effectively reduc e coverage of the area's blind spots; Ø offer over 3 times transmission rate than ordinary 802.11 g product Ø support 64/128-bit data encryption.WEP, WPA, and WPA2 , WPA&WPA 2 mixed and so on ma ny kinds of encryption and security mechanism; Ø support RTS/CTS protocol (request to send/allow send agreement), data subdivision function; Ø provide 1 10/100M adaptive Ethernet (WAN) interface, and WAN connection; Ø provide four 10/100M adaptive Ethernet (LAN) interface, and LAN connections; Ø support XDSL/Cable MODEM, residential broadband fixed IP, dynamic IP of residential broadba nd access Ø support MAC address filtering, IP address filtering, URL filtering; Ø supports remote Web management, all Chinese configuration interface, simple way of Web upg rading Ø using wireless Roaming (Roaming) technology, efficient wireless connection; Ø support hidden wireless SSID function and based on the MAC address of access control (as many as 30 groups); Ø support port automatic identification cross/direct （Auto MDI/MDIX） Ø provide system security logs, can record routers use state; Ø support IEEE802.11 b/IEEE802.11 g adaptive or manual settings mode; Ø support universal plug and play (UPnP), DDNS function; Ø support Firefox 1.0, IE5.5 and upgrade web browser; Ø support banned LAN users to access the Internet; Page 7 of 10 Ø support simple network time protocol (SNTP); Virtual server; Ø support DMZ host; Ø support WDS wireless network expansion; Ø support broadband control function 二、introduction of Product Parameters basic parameter System requirements The cable with Ethernet port or DSL modems configured Computer :Windows XP SP2 or Windows 2000 SP4 or Mac OS X （v10.410.3 ） or based on Linux OS -Already installed Ethernet card - Internet Explorer 6 or Firefox 2.0 or higher Internet Official Protocol Standards IEEE 802.11n、IEEE 802.11g、IEEE 802.11b; IEEE 802.3、IEEE 802.3u、IEEE 802.3x Wireless rate 300 Mbps Wireless frequency range 2.4 GHz～2.4835 GHz Connector（Board inside） •one 10/100M self-adaption RJ45 WAN port（Auto MDI/MDIX）； • four 10/100M self-adaption RJ45 LAN port（Auto MDI/MDIX）； Button WPS(1 Sec)/Reset(5 Sec) LED • PWR Power indication • WLAN status indication • LAN Link/Act indication Power supply input voltage range (VAC)：110V～240V Output voltage range (VDC): 12V==1A Antenna Detachable 5dBi antenna Size (L×W×H) 130mm x 86.5mm x 18 mm Wireless parameters Fundamental Function • Wireless switch ； • SSID Radio switch； • channel selection：1～14； • Band bandwidth optional：20MHz、40MHz、； • Wireless mode optional：11n Only、11b/g/n Mixed、11b/g Mixed、11g Only、 11b Only； Page 8 of 10 • Launch adjustable power； Work Pattern • Bridge mode； • Gateway mode； • Ethernet Converter mode； • AP Client mode； Power 19dBm （maximum） EVM -29dB Accept Sensitivity 135M:-70dBm@10% PER;65M:-72dBm@10% PER; 54M:-75dBm@10% PER; 11M:-86dBm@10% PER; 13M: -85dBm@10% PER; 6M:-87dBm@10% PER; Wireless Security • Wireless MAC address filtering； • Wireless security function switch； • 64/128 WEP encryption； • WPA/WPA2、WPA-PSK/WPA2-PSK security mechanism； Other Functions • Support wireless roaming； • Radio host status display； Cable function DHCP Settings • DHCP server； • DHCP clients； • he client list； • static address assignment； Port Forwarding • virtual server； • special applications； • DMZ host； • UPnP Settings； Security Settings • IP and MAC address binding the ARP attack； • IP address filtering； • domain filtering； • MAC address filtering； • DoS attack prevention； • FLOOD attack prevention； • Ping control; System Tools • flow statistics； • system safety diary； • local Web management control； • remote Web management； • the configuration file introduction and export； • Web software upgrade； Other Use environment • working temperature：0°C～40°C • storage temperature：-40°C～70°C • working humidity：10%～90%RH no condensation •storage humidity：5%～90%RH no condensation Page 9 of 10 三．Software function profile 1. Wireless access Support 54/48/36/24/18/12/9/6M or 11/5.5/2/1-m rate adaptive; Support 64/128/152 a WEP encryption; Support 802.1 X, WPA, IEEE TKIP, AES encryption and security mechanism etc; Support SSID broadcasting control and based on the MAC address of access control; Using wireless Roaming (Roaming) technology, efficient…

Text truncated - open the document above for the full version.

5 5 4 4 3 3 2 2 1 1 DD CC BB AA PA RT3050 2.4GHz TX0 40MHz XTAL Antenna Connector BPF 2.4GHz TX0 2.4GHz RX0 3.3V LNA SPDT Switch Step-Down Regulator 2.4GHz RX0 RJ45x5 Transformer 5V Step-Down Regulator 1.5V5V Step-Down Regulator 5V12V FLASH 32Mbit SDRAM 8Mx16 RESET LDO2.0V3.3V RT3052 AP Block 2.2 11n 2.4G AP-RT3052 Block RALINK TECHNOLOGY, CORP. CONFIDENTIAL C 1414Friday, June 24, 2011 Title SizeDocument NumberRev Date:Sheetof PDF www.fineprint.cn

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 Shenzhen Century Xinyang Tech Co., Ltd Add: Room3001~3002, East Tower 30/F, Nanshan Software Park, Shenzhen, China Tel: +86-755-26616600 Fax: +86-755-26616600 ext: 816 Web: www.sztianhao.com Email: [email protected] Contact Person: Wiley Tsai Phone: 134 1012 0209 2011-06-14 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Man & Machine Inc. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product name: Wireless Router, Model no.: SL-R6801, SL-R6802, SL-R7201, SL-R7202, SL-R7203, SL-R7204, SL-R7205, SL-R7206, SL-R7207, TK-R6801, TK-R7202, SAI- BCS-104, SAI-BC-B209, SAI-SCS-103 We affirm that between SIEMIC and Man & Machine Inc., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely,

Shenzhen Century Xinyang Tech Co., Ltd Add: Room3001~3002, East Tower 30/F, Nanshan Software Park, Shenzhen, China Tel: +86-755-26616600 Fax: +86-755-26616600 ext: 816 Web: www.sztianhao.com Email: [email protected] Contact Person: Wiley Tsai Phone: 134 1012 0209 Date:2011-07-05 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: ZNPWIDEMAC To Whom It May Concern: This letter is to ascertain that Shenzhen Century Xinyang Tech Co., Ltd Product Wireless Router has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Signature

FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F ____________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 1 of 3 Fig.1 Fig.2 FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F ____________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 2 of 3 Fig.3 Fig.4 FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F ____________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 3 of 3 Fig.5

FCC ID: ZNPWIDEMAC Shenzhen LCS Compliance Testing Laboratory Ltd. Report No. LCS1106010882F This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Size: 2.5cm(L)x2.5cm(W) Label Location

FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F _____________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 1 of 2 Fig.1 Fig.2 Antenna FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F _____________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 2 of 2 Fig.3

SL-R6801’s Design Description SL-R6801 Wireless 150Mbps Wireless Router is a DSL broadband access device which allows ADSL connectivity while providing 802.11b/g/n wireless LAN capabilities for home or office users. It supports ADSL/ADSL2/ADSL2+ standards, even offers auto-negotiation capability for different flavors (G.dmt, G.lite, or T1.413 Issue 2) according to central office DSLAM.s settings (Digital Subscriber Line Access Multiplexer). The ADSL connection is made using ordinary twisted-pair telephone line with standard RJ-11 connectors. The Router connects to an Ethernet LAN via wireless and four standard Ethernet 10/100 BASE-T interface using RJ-45 connectors. This arrangement allows wired and wireless workstations to share network resources and connect to the Internet using a single WAN interface and IP address SL-R6801 Wireless 150Mbps Wireless Router USE a high-performance, single chip CPU. It contains a high performance 256-MHz MIPS32 processor, integrated ADSL, Ethernet PHYs, hardware SAR, dual Ethernet Media Access Controllers (MACs).Integrated ADSL transceiver and Analog Front End (AFE) supports full-rate ADSL connectivity conforming to multiple ITU and ANSI specifications, including G.dmt, G.lite, T1.413, ADSL2 and ADSL2+. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer. Quick response semi-conductive surge protect circuit, reliable surge-protect function.

FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F ___________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 1 of 2 5.8. RF Exposure 5.8.1. Limits for Maximum Permissible Exposure (MPE) (2.1093) f = frequency in MHz * = Plane-wave equivalent power density Test Data Predication of MPE limit at a given distance S = PG/4πR² S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) . G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) 5.8.2. Test Result of Maximum Permissible Exposure For 802.11b: Maximum peak output power at antenna input terminal: 18.61(dBm) Maximum peak output power at antenna input terminal: 72.6(mW) Prediction distance: >20 (cm) Predication frequency: 2437 (MHz) Antenna Gain (typical): 1.5 (dBi) Antenna Gain (typical): 1.419 ( numeric) The worst case is power density at predication frequency at 20 cm : 0.0205 (mW/cm 2 ) MPE limit for general population exposure at prediction frequency: 1.0 (mW/cm 2 ) 0.0205(mW/cm 2 ) < 1.0 (mW/cm 2 ) Result: Pass (B) Limits for General Population/uncontrolled Exposures Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–3.0 614 1.63 *(100) 30 3.0–30 824/f 2.19/f *(180/f) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F ___________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 2 of 2 For 802.11g: Maximum peak output power at antenna input terminal: 15.96(dBm) Maximum peak output power at antenna input terminal: 39.45 (mW) Prediction distance: >20 (cm) Predication frequency: 2412(MHz) Antenna Gain (typical): 1.5 (dBi) Antenna Gain (typical): 1.419 (numeric) The worst case is power density at predication frequency at 20 cm : 0.0111 (mW/cm 2 ) MPE limit for general population exposure at prediction frequency: 1.0 (mW/cm 2 ) 0.0111 (mW/cm 2 ) < 1.0 (mW/cm 2 ) Result: Pass For 802.11n: Maximum peak output power at antenna input terminal: 15.52(dBm) Maximum peak output power at antenna input terminal: 35.64(mW) Prediction distance: >20 (cm) Predication frequency: 2412 (MHz) Antenna Gain (typical): 1.5 (dBi) Antenna Gain (typical): 1.419 ( numeric) The worst case is power density at predication frequency at 20 cm : 0.0101 (mW/cm 2 ) MPE limit for general population exposure at prediction frequency: 1.0 (mW/cm 2 ) 0.0101 (mW/cm 2 ) < 1.0 (mW/cm 2 ) Result: Pass

5 5 4 4 3 3 2 2 1 1 DD CC BB AA Filename: AP-RT3052-V22RW-LNA-2X2-080826.DSN FLASHRST_N PA_PE_G0 WE_N ANT_TRN SDRAM_CLK FLASH_CSN PA_PE_G1 SDRAM_RASN OE_N TXOM4 CPURST_N MADDR[0:22] JTAGRST_N TXOP4 MDATA[0:31] ANT_TRNB SDRAM_CSN RFIN_G0 RFIN_G1 RFOUT_G0 RFOUT_G1 SECU_LED WLAN_LED LINK4 LINK3 LINK2 LINK1 LINK0 RXIM4 RXIP4 RXIM3 RXIP3 TXOM3 TXOP3 TXOM2 TXOP2 RXIM2 RXIP2 RXIM1 RXIP1 TXOM1 TXOP1 TXOM0 TXOP0 RXIM0 RXIP0 LNA_PE_G1 LNA_PE_G0 PWR_LED WPS_LED WPS_PBC RST_PBC RX_SW RX_SWN TSSI_PA0 INIC_RST INIC_WLED Title SizeDocument NumberRev Date:Sheet of AP-RT3052-V22RW-LNA.SCH 2.2 11n 2.4G AP-RT3052 RALINK TECHNOLOGY, CORP. CONFIDENTIAL B 114Tuesday, August 26, 2008 Title SizeDocument NumberRev Date:Sheetof AP-RT3052-V22RW-LNA.SCH 2.2 11n 2.4G AP-RT3052 RALINK TECHNOLOGY, CORP. CONFIDENTIAL B 114Tuesday, August 26, 2008 Title SizeDocument NumberRev Date:Sheetof AP-RT3052-V22RW-LNA.SCH 2.2 11n 2.4G AP-RT3052 RALINK TECHNOLOGY, CORP. CONFIDENTIAL B 114Tuesday, August 26, 2008 1-CPU-RT3052 1-CPU-RT3052 FLASH_CSN WE_N OE_N SDRAM_CLK SDRAM_CSN SDRAM_RASN MADDR[0:22] MDATA[0:31] TXOM4 TXOP4 RXIM4 RXIP4 ANT_TRN ANT_TRNB PA_PE_G0 PA_PE_G1 CPURST_N JTAGRST_N SECU_LED WLAN_LED RFOUT_G0 RFOUT_G1 RFIN_G0 RFIN_G1 LINK3 LINK2 LINK0 LINK1 LINK4 RXIM3 RXIP0 RXIP1 RXIP2 RXIP3 RXIM0 RXIM1 RXIM2 TXOP0 TXOP1 TXOP2 TXOP3 TXOM0 TXOM1 TXOM2 TXOM3 LNA_PE_G0 LNA_PE_G1 PWR_LED WPS_LED WPS_PBC RST_PBC RX_SWN RX_SW TSSI_PA0 INIC_RST INIC_WLED 5-POWER 5-POWER CPURST_N FLASHRST_N JTAGRST_N INIC_RST 2-MEMORY 2-MEMORY FLASH_CSN OE_N WE_N SDRAM_CLK SDRAM_CSN SDRAM_RASN MADDR[0:22] MDATA[0:31] FLASHRST_n 3-WLAN 3-WLAN ANT_TRN ANT_TRNB PA_PE_G0 PA_PE_G1 RFIN_G0 RFIN_G1 RFOUT_G0 RFOUT_G1 LNA_PE_G0 LNA_PE_G1 RX_SWN RX_SW TSSI_PA0 4-ETHERNET 4-ETHERNET TXOM4 TXOP4 RXIM4 RXIP4 RXIM3 RXIP3 TXOM3 TXOP3 TXOM2 TXOP2 RXIM2 RXIP2 RXIM1 RXIP1 TXOM1 TXOP1 TXOM0 TXOP0 RXIM0 RXIP0 6-LED 6-LED LINK0 LINK1 LINK2 LINK3 LINK4 SECU_LED WLAN_LED WPS_LED PWR_LED WPS_PBC RST_PBC INIC_WLED www.fineprint.cn 5 5 4 4 3 3 2 2 1 1 DD CC BB AA Place RT1 close to Power Amp. LDOPLL_Out(50mA) LDORF_Out(200mA) LDOADC_Out(200mA) 1.5V LDO_In(1100mA) 1.2V LDODIG_Out(600mA) 3.3V Input RFG0_IN RFG0_OUT INP0 GINP0 RFIN_G0 RFOUT_G0 INN0 LNA_PE_G0 RF2G_INP0 ANT_TRNB TP4 RF_V12A ANT_TRN RF2G_OUTP0 WLAN_LED RF2G_INN0 PLL_V12A TSSI_IN0 PA_PE_G0 PLL_VC_CAP 40MX1 ADC_VREFN0 40MX2 ADC_VREFP0 ADC_VREF025N ADC_VREF ADC_VREF025P LNA_PE_G1 PA_PE_G1 RF2G_OUTP1RFOUT_G1RFG1_OUT INN1 RFG1_ININP1RFIN_G1RF2G_INP1 RF2G_INN1 GINP1 1.5VD1.5VDD BG_RES_12K LDODIG_OUT TSSI_PA0 V33A GND ADC_V12D RFOUT_G0(8) RFIN_G0(9) LNA_PE_G0(9) ANT_TRNB(10) PA_PE_G0(8) WLAN_LED(13) ANT_TRN(10) PA_PE_G1(8) LNA_PE_G1(9) RFOUT_G1(8) RFIN_G1(9) TSSI_PA0(8) GND GND GND GND GND GND 3.3VD GND 1.2VD GND GND 1.5VDD GND GND 3.3VD GND GND GND GND GND GND GND GND GND GNDGNDGND Title SizeDocument NumberRev Date:Sheet of 11-RT3052-RF-A.SCH 2.2 RT3052-A RF RALINK TECHNOLOGY, CORP. CONFIDENTIAL B 214Tuesday, August 26, 2008 Title SizeDocument NumberRev Date:Sheetof 11-RT3052-RF-A.SCH 2.2 RT3052-A RF RALINK TECHNOLOGY, CORP. CONFIDENTIAL B 214Tuesday, August 26, 2008 Title SizeDocument NumberRev Date:Sheetof 11-RT3052-RF-A.SCH 2.2 RT3052-A RF RALINK TECHNOLOGY, CORP. CONFIDENTIAL B 214Tuesday, August 26, 2008 C38 0.1uF C38 0.1uF 1 2 C7 10pF C7 10pF 1 2 C24 10pF C24 10pF 12 C330.1uFC330.1uF 12 C39 0.1uF C39 0.1uF 1 2 C28 0.1uF C28 0.1uF 1 2 L1 1.5nH L1 1.5nH 1 2 C34 100pF C34 100pF 1 2 C5 10pF C5 10pF 1 2 U1A RT3052 U1A RT3052 RF0_2G_INN A3 RF0_2G_OUT A2 RF0_LNA_PE C10 RF0_PA_PE D2 RF0_TSSI_IN B8 RF1_2G_INP B1 RF1_2G_INN C1 RF1_2G_OUT D1 RF1_LNA_PE B12 RF1_PA_PE E1 WLAN_LED_N F4 ANT_TRN F3 ANT_TRNB G4 BASE_TRX_QN C9 BASE_TRX_QP D9 BASE_TRX_IN D8 BASE_TRX_IP C8 PLL_X2 C7 PLL_X1 C6 PLL_VC_CAP A5 RF0_2G_INP A4 BG_RES_12K A6 RF1_LO_V12A E3 RF0_LO_V12A D3 RF_BB1_V12A B3 VCO_VCO_V12A B4 VCO_LO_V12A C4 PLL_PRE_V12A C5 PLL_DIV_V12A B5 BG_V33A D6 LDORF_OUT_V12 A7 LDORF_IN_VX B7 LDOPLL_OUT_V12 B6 RF_BB2_V12A A8 ADC_VREF A12 ADC_VREFN A9 ADC_VREFP A10 ADC_VREF025N B11 ADC_VREF025P A11 ADC_V12A B9 ADC_V12D B10 LDOADC_OUT_V12 D11 LDOADC_IN_VX C11 LDODIG_IN_VX C12 LDODIG_OUT_V12 A13 RF_V33A E2 RF0_V12A A1 RF1_V12A C2 RF1_TSSI_IN D7 LDO_V33A D12 C26 10nF C26 10nF 1 2 R7 12K 1% R7 12K 1% 1 2 C1 10nF C1 10nF 12 C6 10pF C6 10pF 1 2 C16 0.1uF C16 0.1uF 1 2 R10 ohmR10 ohm 12 C350.1uFC350.1uF 12 C40 0.1uF C40 0.1uF 1 2 TP4TP4 1 C15 1uF C15 1uF 1 2 C201.5pFC201.5pF 12 C320.1uFC320.1uF 12 C27 1pF/NI C27 1pF/NI 1 2 C2 1.5pF C2 1.5pF 1 2 L41.5nHL41.5nH 12 R20 ohmR20 ohm 12 C13 1uF C13 1uF 1 2 L40 0 ohm L40 0 ohm 12 C9 100pF C9 100pF 1 2 R6 20K R6 20K 1 2 t RT1 CT6103-3435-5P t RT1 CT6103-3435-5P 1 2 C31.5pFC31.5pF 12 C410pFC410pF 12 C18 100pF C18 100pF 1 2 C25 10nF C25 10nF 1 2 L5 0 ohm L5 0 ohm 12 R510KR510K 12 C31 4.7uF C31 4.7uF 1 2 C21 10pF C21 10pF 12 R30 ohmR30 ohm 12 L6 0 ohm L6 0 ohm 12 C1110pFC1110pF 12 L21.5nHL21.5nH 12 C8 100pF C8 100pF 1 2 R40 ohmR40 ohm 12 L3 1.5nH L3 1.5nH 1 2 C30 0.1uF C30 0.1uF 1 2 C22 1uF C22 1uF 1 2 2.5x3.2 U2 XTAL/3.2x2.5/40MHz 2.5x3.2 U2 XTAL/3.2x2.5/40MHz 1 2 4 3 C17 10pF C17 10pF 1 2 C14 10nF C14 10nF 12 C12 1pF/NI C12 1pF/NI 1 2 C213 10uF C213 10uF 1 2 C19 1.5pF C19 1.5pF 1 2 C2310pFC2310pF 12 C29 0.1uF C29 0.1uF 1 2 C37 22nF C37 22nF 1 2 C36 27pF C36 27pF 1 2 C1010pFC1010pF 12 www.fineprint.cn 5 5 4 4 3 3 2 2 1 1 DD CC BB AA 2.54mm Reserved for RT3052 iNIC: GPIO6 pull high --> load code mode GPIO6 pull low --> dump switch mode SDCS_N FLASHCSNFLASH_CSN WE_N SDCLK SDRAM_CSN SDRAM_CLK SDRAS_N WEN OENOE_N SDRAM_RASN CPURST_N WPS_PBC PWR_LED WPS_LED RST_PBC UART_TX UART_RX I2C_SD I2C_SCLK VBUS PADP PADM VBUS UPHY_VRES SPI_DIN SPI_EN SPI_DOUT SRAMCSN SPI_CLK GPIO7 GPIO11 GPIO8 GPIO12 SECU_LED MADDR[0:22] MDATA[0:31] ID UD+ UD- MADDR21 MDATA3 MDATA22 MDATA5 MDATA17 MADDR3 MDATA10 MDATA12 MADDR8 MADDR15 MADDR18 MDATA26 MADDR20 MDATA4 MADDR9 MDATA18 MADDR1 MDATA11 MDATA20 MADDR13 MADDR17 MDATA1 MDATA28 MDATA19 MADDR2 MADDR5 MDATA15 MDATA24 MDATA6 MADDR14 MADDR0 MDATA2 MDATA29 MADDR10 MADDR22 MDATA23 MDATA25 MDATA8…

Text truncated - open the document above for the full version.

FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc. Page 1 of 52 FCC PART 15.247 TEST REPORT For Shenzhen Century Xinyang Tech Co., Ltd Wireless Router Model No.: SL-R6801 Report Number : LCS1106010882F Date of Test : June 1, 2011 – June 10, 2011 Date of Report : June 10, 2011 Prepared for : Shenzhen Century Xinyang Tech Co., Ltd Address : Room 3001-3002, East Tower 30/F, Nanshan Software Park, Shenzhen, China Prepared by : SHENZHEN LCS CERTIFICATION SERVICES INC. Address : Xingyuan Industrial Park, Tongda Road, Bao’an Blvd, Bao’an District, Shenzhen, Guangdong, China FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc. Page 2 of 52 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION........................................................................................................................ 3 2. GENERAL INFORMATION .................................................................................................................................. 4 2.1. PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2.2. OBJECTIVE............................................................................................................................................................ 4 2.3. RELATED SUBMITTAL(S)/GRANT(S) ..................................................................................................................... 4 2.4. TEST METHODOLOGY........................................................................................................................................... 4 2.5. FACILITIES............................................................................................................................................................ 5 2.6. EXTERNAL I/O CABLE.......................................................................................................................................... 5 2.7. LABORATORY ACCREDITATIONS AND LISTINGS.................................................................................................. 5 3. SYSTEM TEST CONFIGURATION ..................................................................................................................... 6 3.1. JUSTIFICATION...................................................................................................................................................... 6 3.2. EUT EXERCISE SOFTWARE................................................................................................................................... 6 3.3. SPECIAL ACCESSORIES......................................................................................................................................... 6 3.4. BLOCK DIAGRAM/SCHEMATICS............................................................................................................................ 6 3.5. EQUIPMENT MODIFICATIONS................................................................................................................................6 3.6. BLOCK DIAGRAM OF TEST SETUP......................................................................................................................... 6 4. SUMMARY OF TEST RESULTS .......................................................................................................................... 7 5. TEST RESULT ......................................................................................................................................................... 8 5.1. MAXIMUM CONDUCTED OUTPUT POWER MEASUREMENT................................................................................... 8 5.2. POWER SPECTRAL DENSITY MEASUREMENT...................................................................................................... 15 5.3. 6 DB SPECTRUM BANDWIDTH MEASUREMENT................................................................................................... 22 5.4. RADIATED EMISSIONS MEASUREMENT............................................................................................................... 29 5.5. BAND EDGE EMISSIONS MEASUREMENT............................................................................................................ 39 5.6. POWER LINE CONDUCTED EMISSIONS.................................................................................................................. 47 5.7. ANTENNA REQUIREMENTS................................................................................................................................. 50 6. LIST OF MEASURING EQUIPMENTS ............................................................................................................. 51 7. MANUFACTURER/ APPROVAL HOLDER DECLARATION....................................................................... 52 FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc. Page 3 of 52 1. TEST RESULT CERTIFICATION Applicant : Shenzhen Century Xinyang Tech Co., Ltd Manufacturer : Shenzhen Century Xinyang Tech Co., Ltd EUT : Wireless Router Model No. : SL-R6801 Serial Number : N/A Test Rule Part(s) : 47 CRR FCC Part Subpart C §15.247 Date of Test : June 1, 2011 – June 10, 2011 APPLICABLE STANDARDS STANDARD TESTRESULT FCC PART 15.247 (2010) No non-compliance noted SHENZHEN LCS CERTIFICATION SERVICES INC. as requested by the applicant to evaluate the EMC performance of the product Sample received on April 06, 2010 would like to declare that the tested sample has been evaluated And found to be in compliance with the tested rule parts. The data recorded…

Text truncated - open the document above for the full version.

FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F __________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 1 of 2 Fig.1 Fig.2 FCC ID: ZNPWIDEMAC SHENZHEN LCS CERTIFICATION SERVICES INC. No. LCS1106010882F __________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Certification Services Inc Page 2 of 2 Fig.3