ZSW-10-037Mobile Phone

1 Mobile Phone C216 Bmobile Thanks for selecting this mobile phone. For the best performance we recommend that you read the manual carefully. Contents Overview. ..............................................................................................2 1. Introduction .........................................................................................3 2. Function of main menu.............................................................................4 3. Maintenance and service............................................................................9 2  Overview Please read the following concise rules carefully. Nonobservance to the rules may lead to danger or violence of the laws. The user’s manual gives details about the safety precautions.  Emergency call Make sure the equipment is in the covered area of the network service and the calling f unction is activated. As per the specific requirements, press the key of finish to clear the screen and return to the standby state. Input the emergency call number （112）and press the call key.  Function Description The phone is a perfect combination of humanized design and exquisite workmanship, the streamline and ingenious body is comfortable to hold. With streamline and ingenious frame, it feels comfortable to hold the mobile phone in your hand. It supports TXT electronic book, Blue-tooth, dual SIM cards with one standby, network camera, camera, FM and etc，It makes your work more convenient and your free time more fun with the combination of keyboard, florid colored screen, pleasant bells, cartoon head portrait for incoming calls, strong file management function (supporting T-FLASH card), fashionable camera function and long time tape recording function, music player, video player. 3  Introduction Insert the SIM card and the battery Ask your SIM card dealer whether he has provided SIM card service and the method of usage who may be service provider or other dealers，SIM card and its contacts are vulnerable to scratch or bending. Attention shall be attached when use, insert or take out the card.  Inserting/taking out T-FLASH CARD Only use approved and compatible T-FLASH card applicable to the mobile phone. Approved memory card trade standard is applied; however, certain bands may not be completely compatible with the mobile phone. Using incompatible memory card may damage not only the card and the mobile, but also the data stored in the card.  Charging the battery Check the model number of the charger before using it to charge the mobile，Only use approved battery, charger and accessories applicable to the specific mobile model. Using other types of battery, charger and accessories may violate the certification or warranty terms of the equipment and may result in danger，Refer to the dealer for supply of relative approved accessories.  Startup and shutdown Press the key of power supply to start up or shut down the mobile phone，If it is prompted to input PIN or UPIN, please input the required password (shown as **** on the screen). 4 Function of main menu  Contacts Save the information of contacts , including names and telephone numbers in the contacts.  Message Write a message: You can choose to send the complete message from SIM card 1 or SIM card 2, You can choose multiple receivers to send the message to more than 1 person..  Call logs By telephone if you need to check you call logs>click select call logs menu>View: 1.All calls 2.SIM1/2 missed calls 3.SIM1/2 Dialed calls 4.SIM1/2 Received calls 5.SIM1/2 Rejected calls 6.Delete call logs 7.call timers.  Settings Phone settings 1.1.Date&Time : You can set the phone's time and date and the format. 1.2.Language Settings:You can select the phone’s display language . 1.3.Shortcut Settings:You can set the phone right soft keys and the navigation key shortcut functions. 1.4.Auto power on/off:After setting the time, and by that time the phone will auto power on/off. 1.5.Power management:Battery remains. 1.6.Restore factory settings:Enter the correct password of the phone will have to change your phone settings back to factory default state value, the user of the function be used with caution. (Default password: 1234). Display Settings 1.1.Animation effect:Set power on/off animation. 1.2.Wallpaper setting:Set wallpaper. 5 1.3.Idle display settings:You can choose to display or not display. 1.4.Brightness:The menu is to control of mobile phone screen brightness 1.5.Display backlight :The menu is to control of mobile phone display backlight time. 1.6.Keypad backlight :The menu is to control of mobile phone Keypad backlight time. Call settings This is some of the communications settings.There are have Dual-SM,Call divert,Call waiting,Call barring,Hide ID and others. Security PIN/PIN2:The SIM1/2 security setting need provided network operator .for more details, please contact your operator. Phone locked: You can switch on or off to activate the phone lock function to protect your phone. Modify the phone password:You can change password here. The default password is “0000”. Privacy:You can open the privacy protection function, set up mobile privacy. Auto keypad lock:You can set the on/off automatically lock screen mobile phone. Lock screen by end key:Set end key as dedicated key to lock the phone. Fixed dialing:You can set a fixed dialing. Connections Configure the network parameter in the place.  Multimedia  Camera In the options of camera, you may set the photometry mode, flash light，exposure compensation, avoidance of flickering, postponing shooting, white balance, photo quality, photo size, special effect, profile and etc. You may enter the album to check the formats that the cell phone supports. 6  Image viewer Check the pictures in the memorial card in formats supported by the cell phone.  Video Recorder phone provides video recording, select video footage that can enter the video recording. In the preview video press OK button to begin, press stop again, can have white balanc…

Text truncated - open the document above for the full version.

b mobile HK Limited Agent Authorization Company: b mobile HK Limited Address: Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong Product Name: Mobile Phone Model Number(s): C216 Product Description: Mobile Phone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021.04.27 Name: KA SHING LAM Title: DIRECTOR Company: b mobile HK Limited

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addit in Title busine s authoriz For 4 O For 1 It is our corresp docume authoriz Sincer e Signat u Name: Title: D of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: ZSW-10-0 om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Operatio BOM Lis Tune-up tional to abo 47 CFR §2 ss sensitive zed devices External Test Set Internal P User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: KA SHING IRECTOR ing Techno cations Com s Road 046 for Confiden 037 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram onal Descrip st procedure ove mention .803 and th informatio n s, we reque Photos tup Photos Photos anual rsuant to P u ursuantto KD ding that all uring the ce s informatio sued. LAM b mo logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption ned docume e importatio n remains c st Short Te ublic Notice DB 726920 l measurem ertification re on will be av obile HK ssion’s rule old the follow nitely. m and equi e equipmen ould give co ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for Limited s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e d Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the Date: 04/27 457 and §0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq 7/2021 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

S21020300602 Model: C216 ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 S21020300602 Model: C216 Photo 3 Photo 4 S21020300602 Model: C216 Photo 5 Photo 6 S21020300602 Model: C216 Photo 7 Photo 8 S21020300602 Model: C216 Photo 9 Photo 10

S21020300602 Model: C216 Photo 1 Photo 2 GSM ANT S21020300602 Model: C216 Photo 3 Photo 4 ANT S21020300602 Model: C216 Photo 5 Photo 6 S21020300602 Model: C216 Photo 7 Photo 8 S21020300602 Model: C216 Photo 9

Page 1 of 81 Report No.: S21020300603001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Mobile Phone Trademark： Bmobile Model Name： C216 Family Model： N/A Report No.： S21020300603001 FCC ID： ZSW-10-037 Prepared for b mobile HK Limited Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 81 Report No.: S21020300603001 TEST RESULT CERTIFICATION Applicant’s name .................. : b mobile HK Limited Address .................................. : Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung;New Territories; Hong Kong Manufacturer's Name ........... : b mobile HK Limited Address .................................. : Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung;New Territories; Hong Kong Product description Product name ......................... : Mobile Phone Trademark ............................ : Bmobile Model Name ......................... : C216 Family Model .......................... : N/A Standards .............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ............. : Feb. 23, 2021 ~ Feb. 24, 2021 Date of Issue .......................................... : Feb. 25, 2021 Test Result .............................................. : Pass Prepared By (Test Engineer) : (Cheng Jiawen) Approved By (Lab Manager) : (Alex Li) Page 3 of 81 Report No.: S21020300603001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Feb. 25, 2021 Cheng Jiawen Page 4 of 81 Report No.: S21020300603001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 8 1.5. Ambient Condition ................................................................................... 8 2. SAR Measurement System ................................................................................... 9 2.1. SATIMO SAR Measurement Set-up Diagram ............................................ 9 2.2. Robot ..................................................................................................... 10 2.3. E-Field Probe .......................................................................................... 11 2.3.1. E-Field Probe Calibration ................................................................. 11 2.4. SAM phantoms ...................................................................................... 12 2.4.1. Technical Data .................................................................................. 13 2.5. Device Holder ........................................................................................ 14 2.6. Test Equipment List ................................................................................ 15 3. SAR Measurement Procedures .......................................................................... 17 3.1. Power Reference ................................................................................... 17 3.2. Area scan & Zoom scan .......................................................................... 17 3.3. Description of interpolation/extrapolation scheme .............................. 19 3.4. Volumetric Scan ..................................................................................... 19 3.5. Power Drift ............................................................................................ 19 4. System Verification Procedure .......................................................................... 20 4.1. Tissue Verification ................................................................................. 20 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 21 4.2. System Verification Procedure .............................................................. 22 4.2.1. System Verification Results .............................................................. 23 5. SAR Measurement variability and uncertainty .................................................. 24 5.1. SAR measurement variability ................................................................. 24 5.2. SAR measurement uncertainty .............................................................. 24 6. RF Exposure Positions ...…

Text truncated - open the document above for the full version.

Report No.: S21020300602002 Version.1.3 Page 1 of 45 FCC RADIO TEST REPORT FCC ID: ZSW-10-037 Product: Mobile Phone Trade Mark: Bmobile Model No.: C216 Family Model: N/A Report No.: S21020300602002 Issue Date: Apr 21. 2021 Prepared for b mobile HK Limited Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung;New Territories; Hong Kong Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District Shenzhen, Guangdong, China Tel:400-800-6106,0755-2320 0050 / 2320 0090 Website:http://www.ntek.org.cn Report No.: S21020300602002 Version.1.3 Page 2 of 45 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 12 7.1 FIELD STRENGTH OF SPURIOUS RADIATION ...................................................................................... 12 7.2 EFFECTIVE RADIATED POWER AND EFFECTIVE ISOTROPIC RADIATED POWER ........................ 16 7.3 CONDUCTED OUTPUT POWER ................................................................................................................ 20 7.4 FREQUENCY STABILITY ........................................................................................................................... 22 7.5 PEAK-TO-AVERAGE RATIO ...................................................................................................................... 25 7.6 26DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ..................................................................... 26 7.7 CONDUCTED BAND EDGE ....................................................................................................................... 28 7.8 CONDUCTED SPURIOUS EMISSION AT ANTENNA TERMINAL ......................................................... 29 8 TEST RESULTS .................................................................................................................................................. 30 8.1 CONDUCTED OUTPUT POWER .......................................................................................................................... 30 8.2 PEAK-TO-AVERAGE RATIO .............................................................................................................................. 31 8.3 OCCUPIED BANDWIDTH ................................................................................................................................... 35 8.4 BAND EDGE ..................................................................................................................................................... 39 8.5 OUT-OF-BAND EMISSIONS ............................................................................................................................... 42 Report No.: S21020300602002 Version.1.3 Page 3 of 45 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : b mobile HK Limited Address ....................................... : Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung;New Territories; Hong Kong Manufacturer's Name .................. : b mobile HK Limited Address ....................................... : Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung;New Territories; Hong Kong Product description Product name .............................. : Mobile Phone Model and/or type reference ..... : C216 Family Model ............................... : N/A Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT 47 CFR Part 2, Part 22H, Part 24E ANSI/TIA-603-E-2016 FCC KDB 971168 D01 Power Meas License Digital Systems v03r01 ANSI C63.26:2015 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be…

Text truncated - open the document above for the full version.

FCC ID: ZSW-10-037 RADIATED SPURIOUS EMISSION

Test Positions Left Cheek Left Tilt 15 Degree Right Cheek Right Tilt 15 Degree Front Side (Separation distance of 10mm) Back Side (Separation distance of 10mm) END